BB Link wil not install

After a reasonable big crash ( It wiped out most of my program files . . .)
on my computer I wanted to reinstall BB Link.
Everytime I start the re-installation it runs into : Error 1316. Specified account already exists.
And rolls back the (not yet installed) installation.
Sugestions are appreciated.

Everytime I start the re-installation it runs into : Error 1316. Specified account already exists.
This is because there are still blackberry files let on your computer.
Since the MS Utility did not work for you, that is what it does it removes all files, the only hope you have to install Link is to use Windows Search "Advanced" search Everywhere and manually delete all blackberry files found.

Similar Messages

Apps wil not install

I had a Palm Pre Plus phone and I dropped it and the screen broke. I had an old Palm Pre Plus and activated it. When it activated it would not install all the apps such as Pandora, I purchased a new Palm Pre Plus and activated it and many appls would not install. The new app catalog would not even install. What do I need to do?

You need to install the App Catalog update.
See the post above yours titled, "App Catalog not working?..."
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

OSX 10.5 wil not install on G4

I have a powermac g4 quicksilver,867 mhz,with 9.2 os,1gb of memory,and a new secondary hard-drive that i which to install OSX 10.5 on it,but the software will not install.at first i thought it was the software,it has been exchanged but its not the software.this cpu at one time had OSX 10.0,but it was removed.I get an error that states..the package "install mac osx.app" could not be opened because it cannot be used with this version of mac os or there is a problem with it.if there is a problem with it try to reinstalling the package.is there a way to install this software or am i going about it the wrong way.

You need to do an erase and install.
Start up holding down on the c key.
Select English and continue, then Utilities and disk utility.
Select the hard drive long name and choose partition.
Select 1 partition, name it and select the options button.
Select the Apple Partition Map APM and select mac os x extended journalled and partition.
Then click on first aid, select the volume you have just created and Verify the disk.
If it passes verification then quit disk utility and continue.
When asked for the destination, select your newly created volume and follow the on screen directions.

BlackBerry Link will not install on new Laptop running Windows 8

I have been trying to download Link from BlackBerry.com over several days now. on a new laptop running Windows 8
I get a message saying the *Wizard was interrupted before BB Link could be completely installed. * it suggests that * the system has not been modified and that I try again at another time and run the set up again.* I have done so at least 1/2 doz.. times with no success.
Pleas advise as to corrective actions to take and/or solutions to this problem.
Thanks in advance
Robert Mathieson

Hello robertian047,
Sorry to hear about your issue.
Have a look at the following article which may help you out.
Wizard was interrupted before software could be completely installed
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Blackberry link will not install on windows 8

New Laptop: Samsung core i7
Up to Date Windows 8
link software: 111_b020_multilanguage
and i get the following during installation
Any thoughts how do i get this installed ??????????
Windows ® Installer. V 5.0.9200.16384
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.

Hey cnagy,
Welcome to the BlackBerry® Support Community Forums.
Please try the following:
1. Disable UAC (User Account Control) if enabled on the computer.
2. Download and save BlackBerry Link from www.blackberry.com/blackberrylink.
3. Run the installer as Administrator.
If this fails, please provide the installer error you receive.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Blackberry Link will not install on Windows 8 (64bit) Laptop

Hi,
I'm trying to install Blackberry Link onto my laptop which runs Windows 8 (64bit) but with no success.
From the Blackberry.com website I download the file "100_b075_multilanguage" (have tried both hitting 'run' and saving it then hitting 'run').
After a pop-up window titled "configuring installshield" that contains a progress bar (which does not progress) another pop-up window titled "Windows Installer" appears.
The first line of this new pop-up window says "Windows Installer V 5.0.9200 16384".
The second line says "msiexec /Option <Required Parameter> [Optional Parameter]".
There is then a load of text showing Install Options / Display Options but no means of selecting any of these options.
At the bottom is an OK button and when I press this the process stops and throws me back to the laptop's windows home screen.
Things I've tried without success: -
Disable anti-virus
Amend User Account Control setting (UAC) to 'never notify'
Restart laptop in 'safe mode'
Reinstall Windows 8 from built-in recovery partition
Would appreciate any help / suggestions as to how to fix this and get Blackberry Link installed.
Thanks, Dave.
Solved!
Go to Solution.

Hey wadhurstdaisy,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I suggest following the steps in this KB article as it pertains to the same thing in BlackBerry Link: www.blackberry.com/btsc/KB19300
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Apple itunes 7 wil not install correctly. Uninstalled previous version and still will not work. Help!!

Cannot get itunes 7 to install

Answer previously given by jayg1963.
Go to control panel, add or remove programs or programs and features (later).
Remove all in this order:
itunes
apple software update
apple mobile device support
bonjour
apple application support
Then re-install itunes. May need to run as an administrator.

ILife will not install... any ideas?

Bought Mac Box Set Family Pack.
Snow Leopard successfully installed on three PC's.
iLife wil not install on third PC
Have run all possible updates
Any ideas?

When your computer 'spits' out the disc it means it is unreadable. Since the discs are readable on other computers it suggests that there's a problem with the computer's optical drive or that the discs are somewhat scratched/dirty and that computer is more sensitive than your other computers.
Can that computer read other DVDs? You don't need to test with an installation DVD you can try a movie. The problem might be nothing more than a dirty optical drive lense and be fixable by using a DVD drive cleaning kit.
What's the silver side of the installation disc look like? See any scratches and/or finger prints? Carefully wipe the disc with a lint free cloth (wiping in circles around the disc, not across the grain)
Assuming you have another FireWire computer you could connect the two with a FW cable and boot the other computer into FireWire Target Disk mode by rebooting and holding the 'T' key. This will let the MacBook use the other computer's drive to install the software.

Create PDF not installed

I am upgrading my laptop from Vista to Windows 7, 32 bit. Because of driver problems I had to do a full install of Windows 7 operating system, and reinstall Acrobat 8. The Acrobat Create PDF links were not installed in Outlook and Word, and a PDF printer was not installed. I haven't checked the other applications. These links were available in Vista and have been installed with another laptop with Windows 7, 64 bit, installed. I customized the installation, but only omitted some of the language support.
I have reinstalled Acrobat 8 and restarted the computer. Any suggestions.

In addition to what Michael said, keep in mind that different versions of Office also require different Acrobat versions/ add-ins. Office 2007 will require Acrobat 9, Office 2010 and above Acrobat X even.
Mylenium

TS1717 I need to reinstall itunes as I have a message saying that this copy of itunes is corrupted or not installed correctly. Is there a link to reinstall without losing all my music stored? Thanks.

I need to reinstall itunes as I have a message saying that this copy of itunes is corrupted or not installed correctly. Is there a link to reinstall without losing all my music stored? Thanks.

Just reinstall iTunes. I done the same thing without losing my iTunes library.
BUT if you did lose your music follow through these:
Downloading past purchases from App Store, iBookstore, and iTunes Store.
How to use your iPod to move your music to a new computer
In the near future, check through these (if nessessary):
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues

Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" Error 7.....Help, please??

Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??

Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Updating my Win7 to 12.1, I get 'iTunes was not installed correctly Error 7 (Windows error 127). If I try to launch, I get 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'. Help!

Windows version 7. Auto update of iTunes to version 12.1 from 12.0.1.
At end of install process, message 'iTunes was not installed correctly. Error 7 (Windows error 127).
Tried to launch iTunes, anyway, but immediately got message 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'.
Tried downloading iTunes and updating manually - get exactly the same result.
No problem using iTunes before this.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2

Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help me

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

At start up I get a request to install a bitdefender extension to safari. I am sure this is a virus as the link is not familiar, how do I remove this start up request

At start up I get a request to install a bitdefender extension to safari. I am sure this is a virus as the link is not familiar, how do I remove this start up request

Hi Pero127,
What I mean is was this a package installer, or an actual extension?
If just an extension, when you double click one, the OS asks if you want the extension installed. In which case, yes, that is the only item installed on your computer and you can then just uninstall it.
But if it was an application installer package, then it could have installed many more items onto your computer than just the extension. The rest will still be on your drive after removing the extension.

WRT400N Easy Link Adapter Sofware will not install

I had the software installed on a desktop, but I uninstalled it and moved the desktop to a cable modem. Some where in the process the laptop (HP Pavillion DV4-1435DX) the wife uses lost everything and could not connect to the router even after a reset. I decided to start from scratch and cleared the router memory, but I cannot install the Lynksys software on the laptop. I select "setup" on the install menue and the disk drive just grinds and hangs, but will not install. I have visually checked the disk for defects, under a magnification, but I do not see any. I have tried the disk in the desktop Samsung drive and it works without issue. As a test I installed a game on the laptop without any issues at all. It is either the drive or the software disk, but at this point I am stumped. Can you buy the software seperately?

I will recommend you to format your pc, and then reinstall the software.
Data Recovery | Hard Disk Recovery

BB Link wil not install

Similar Messages

Maybe you are looking for