BB- pearl 8100 - JVM error 547

Hi,
I have Blackberry 8100 pearl model, it is giving me following error message ( even after hard restart, this msg appears as soon as i insert the battery):
JVM ERROR 547
flash write failed: p=827a0000,s=4.
I downloaded the version 4.2.2 desktop manager from the below link:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
After installing the new DTM ver 4.2.2, I performed the points mentioned in this link
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB10144&sliceId=SAL_Pub...
But when i try this , it fails in step 4, that is, I am not able to see any applications listed. It is displaying this message:
" The BlackBerry desktop software does not have BlackBerry Device software for the device that you have connected to the computer. Contact your wireless service provider or system administrator."
I have not taken any back up of my phone, so i dont want to loose my data esp the contact list and messages. Earlier I had version 4.2.0.10 deskop manager now even after upgrading it to 4.2.2 it didnt help .
I also tried selecting secure mode and reset but it didnt help.
Please help me to recover. I shall be extremely thankfull.
PS: I am new to this forum, not sure If I am posting at right place, please redirect me to the correct thread if I am wrong.

Hello jamin
The first thing here is that your data is most likely already lost
Second, have you downloaded your device software? The device software is different from the
Desktop Manager software.
If you have not downloaded your device software you will need to do this and
install it on the computer. I suspect
this is the reason you are getting " The BlackBerry desktop software
does not have BlackBerry Device software for the device that you have connected
to the computer. Contact your wireless service provider or system
administrator."
To get the device software you will need to go back to the carrier site and
download it.
If you tell me who your carrier is I can get you the download link.
Once you have the device software you are going to want to follow the below
KB article
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB11320&slic...
Hope to hear from you soon!
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

Jvm error 547

Good morning, I have a blackberry pearl and on the screen has appeared the following message "JVM Error 547 flashes write failed Scroll for available commands." with under different options among which Continuous, Reset, Attach Debugger, Breakpoint, Catfail, Delete Fixups, Delete Modules, Delete Persistent Objects, Dump Logged Stack Traces...
What must I do?
Thanks

Hi there!
You've posted this three times...that is not encouraged as it takes away from other who need help while we spend time duplicating (or triplicating) efforts for you. Please choose one of your threads to work in and mark the others as solved.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

JVM Error 547 - Can't load OS

I have a Blackberry 8120 and it keeps getting the JVM Error 547 with the only option to reset. I tried loading a fresh install of the OS but it get's to the point of loading the first .cod file and it resets itself. I've also tried using just the app loader and not the Desktop Manager but get the same problem. I've tried downgrading the OS but get the same problem. I've also tried a custom app called "BBSAK" but I get the same problem.
Help! I've searched the net and tried a bunch of things but nothing seems to work! Is the blackberry fried?

Turns out it was the ribbon.

JVM Error 547 - Flash Write Failed

Hi, i got the 547 error after a long way of many other errors, it start by installing a new app using the stupid DM and my BB restart after the installation and i got 507 error, which mean no software, so i doubt it and tried to pull the battery, sim card and SD, wait for some time, return the battery, and 561 error was there, tried again and nothing
after search on crackberry and blackberry forums, talking about JL and BBSAK, used both to wipe and re-install the OS again,
of course i remove the vendor.xml from common files and user "document and settings" folders
during the installation it load until the net_rim_cldc.cod and restart on its own, and the loader give an error not able to connect again, so i wait until my phone restart with error 507 and click on retry, it stupidly erase every thing again instead of continue from the stop point and it reach the same point and restart, so i fall in a loop
i tried to delay the net_rim_cldc.cod to the end by changing the Platform.alx, and i tried to cancel this file from Platform.alx and it stuck with the truetype font.cod
i remove this OS and i tried to download from a different service provider, "again of course i remove the two files for vendor.xml" but no use
then i used the BBSAK to add manually all the basic files which is 220 modules, and i left the net_rim_cldc.cod to the end, suddenly my phone try to start and keep restarting every 2 minutes, and after several attempts is give me the JVM Error 547 "flash write failed"
no i cannot connect to BBSAK, the only way is to connect to the loader without battery and wait until it finish erasing then i can connect to JL to wipe or BBSAK
but then what?? i will end up between BB apploader which cannot finish the installation and BBSAK which can put the 220 files in 220 steps and the phone will not load
now, any BB genius can help??

Hi maytik and welcome to the BlackBerry Support Community Forums!
Take a look at this article as it should help get you back up and running again:
KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
Hopefully that helps!
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Pearl 8130 jvm error 545 reccouring issue

hey all i have a 8130 pearl im trying to get going again, i keep getting this jvm error 545 which keeps reoccuring even after i reload/ clean out my handheld i wonder if a internal problem with the phone thats not fixable. can any one please help me out on this i would really like to hop back on to my blackberry.
thnx
zak

Your device software is corrupted, read this link please
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB12077&sliceId=1&docTy...
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Pearl flip, jvm error 545,

so i'm just about to update my software when it says right after i click to update "please verify internet connection or try again later, if the problem persists" well i know my connection is fine, and i've waited like an hour and i still get that message. anybody have an answer?

Hey kylebogue,
Are you seeing this error when you connected to BlackBerry Desktop Manager or are you seeing this error on the device? If you are trying to update your device you can use this article to help you out http://bbry.lv/cG8oer
Let us know how you make out.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Pearl 8100 ATT

Please help!I get a JVM error 547 flash write failed. I have not backed up my device. How do I either uninstall and re-install all apps or resolve this issue. I can't even turn off my phone nor navigate on it. Thanks.

Remove and reload the OS totally.
Providing you have the latest device OS for your carrier..
*YOU DO NOT NEED TO ALSO DOWNLOAD DESKTOP MANAGER PROGRAM* - JUST THE DEVICE SOFTWARE*
go to C Drive: Program file: Common Files: Research in Motion: App Loader : Loader.exe and run that file...
Go to device application selection and untick anything you dont need.
Click Next
I would not reccommended backup and restore. (If you are running a BES, everything should be on your pc anyway) But if you must, then do a backup)
When you get to the last page before you select 'finish' you should see an Advance Options. Click this and make sure both checkboxes are ticked.. This removes and replaces any bugs or glithces in the software.
You must make sure you have the LATEST version for your device, distributed by THE CARRIER THE DEVICE WAS MADE WITH. (Find this on the carriers website
If you're not sure, do a vendor ID check.
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

JVM error 545 in 8100 emulator

Hi all,
When i run my application I get an error as JVM error 545 incompatible or corrupt file types.....
Can anyone please tell me how to solve this.......

unfortunatley, from my experience, the only salvation from a jvm error is to reload the phones operating system. I would recomend backing up the phone, and then reloading software which can usually be attained in the phones box or from your carriers website. I would also recommend doing this with your phone carriers technical support team on the line with you if at all possible.
Andrew Hager
U.S. Cellular Corporation
Smartphone Specialist

JVM ERROR 545

Hi i recently bought the backberry pearl 8100 from ebay and everything was fine at 1st, however now evertime i satrt it up i get the JVM Error and i cant get past it so i cant use the phone, i installed the desktop manager on my pc so i could reset the phone but it asks fo a security code and i dont know what it is, is there a default code or some other way to reset the phone to factory default??? thanks

Hi and welcome to the forums!
Here is the information on your message:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB10406&sliceId=SAL_Pub...
Here is the procedure to resolve:
Step #1
Before starting make sure that BlackBerry Desktop Software is installed on the computer.
Step#2
Make sure that you have installed updated device software installed in your PC. Check this link to get update device software from carrier OS download site.
Step#3
Users can perform a full or selective backup of the data using the Backup and Restore tool in BlackBerry Desktop Manager by completing the following steps:
Connect the BlackBerry device to the computer running BlackBerry Desktop Manager.
Open BlackBerry Desktop Manager.
Double-click Backup and Restore.
Select Backup to perform a full backup or select Advanced to perform a backup of specific databases.
Choose a location to save the backup file, then click Save.
Step#4
To perform a clean install of the BlackBerry Device Software, perform the following steps:
Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
Double-click the Application Loader icon.
Click Next to start the installation process.
Type your BlackBerry smartphone password, if prompted, and click OK.
Click the check boxes next to the names of the applications you want to load, and then click Next.
Click Advanced, and then click the check box beside Erase all currently installed applications.
Click Next.
Click the check box next to Do not automatically backup the application data during the loading process.
Clear the box next to Backup and restore applications installed wirelessly.
Click Next > Finish.
When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

JVM error 102" no fix found"

I am getting JVM error 102, when i can get phone to turn on.
most of the time i just get red light flashing 2 times.
I tried connect to USB and run apploader but i get unknown device.
I found a post where i can connect via usb while red light is on and then connect to BB via apploader but the port selection show COM5 there is no USBUNKNOWN liste.
IVe als tried JLcommander it will not connect either.
If i plug usb in with jvm 102 the phone shuts off.
I haver also tried taking battery out and plugging in.
Nothing is working
pls help.
BLACKBERRY PEARL
WINDOWS XP
T-MOBILE

Use JL_cmder to wipe off your device and then follwo the process that I've mentioned.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

BB Pearl - 8100 Bluetooth: "Unable to locate Object Push Server..."

I just purchased a New 2009 Audi A4 that has Bluetooth, however my Blackberry Pearl (8100) does not correctly transfer the Phonebook. Based on what I've read on various message boards, I should be happy it at least functions to make & receive calls, however when I try to sync the phonebook, I receive an Error: "Unable to locate Object Push Server..."
My BB Pearl has the following OS Version - 4.2.1.96 (Platform 2.3.0.78).
Based on the Official Audi Documentation, Research In Motion (RIM), Blackberry 8100 (Pearl), GSM, 4.2.0.51 was certified to work with the car. I assume (maybe incorrectly) since I'm at a higher version, I should be ok. I reviewed and have tried several options below, however have not been successful.
1. Turn on Car & Pair, disconnect Phone, then Reconnect and manually "Transfer Contacts"
2. Move Contacts into a Specific Category, then in the Bluetooth Menu just sync that particular category...manually " Transfer Contacts"
3. Disable Encryption & manually "Transfer Contacts" In my Bluetooth menu, it says the following Bluetooth Options are available:
Discoverable: Yes
Allow Outgoing Calls: Always
Address Book Transfer: All Entries
Led Indicator: On
Services
- Headset
- Handsfree
- Dial-Up Networking
Any ideas?
Thanks,- Nick

I too have a 2009 A4 Avant Audi - initially the BB and car paired beautifully, but after two weeks the phonebook would no longer transfer. I managed to solve the problem by deleting the call log. the BB keeps a lot of history and it seems as if over time, the memory get clogged, preventing the transfer of the telephone book. On trying to doing it manually, you then get the unable to locate object push server. Try it, it worked for me

Pearl 8100 App World

Hello,
Can someone tell me if I can get App world on a pearl 8100? I have downloaded the app on the phone, but I can't find the icon. Also I have tried setting up App World under my Blackberry ID, but it keeps coming up with the following error message
App World Web Plugin Error
An error has occurred communicating with the BlackBerry App World Client. If you have content protection enabled on your device, please disable and try again
The content protection is disabled.
Please help
Thanks

Do you meet all of these AppWorld requirements?
App World Requirements:
You must meet all of the requirements:
1. BlackBerry® Device Software version 4.2 or higher
2. BlackBerry smartphones with trackpads, trackballs or SurePress™ touch screen
3. To use BlackBerry App World, you require a service plan that includes access to the BlackBerry® Browser
4. And you must be in one of the countries which AppWorld supports
http://www.blackberry.com/app_includes/devicesoftware/appworld/appworld_availability_en.html
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My pearl 8100 die, and I cannot recover it.

hi
So this is my situation.
My blackberry pearl 8100 sunddenly die.
It is detected by the compurer, and it show a battery with a green bar across it.
I try to wipe it with jl cmdr, blackberry MCP and BBSAK, no one detect the phone.
I try to follow a guide to reinstall the OS with loader.exe but it start the prosses and make an error while is in the "waiting dervice Initialization" screen
My cellphone have never receive any damage, like getting wet or dropped, it only stpo working from one m oment to another.
Is there any way to recover it?

and have you tried this?
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Pearl 8100 quit working when updating software

I have a Pearl 8100 on AT&T and attempting to update the device software to version 4.5xxx. I downloaded the software onto my Vista computer and while updating, the device crashed as the application said it was removing items. The device shutdown and now the light does a double flash in red and will not start up. I have tried removing the battery, but does not power up, only receive the flashing light. I am unable to master reset as the device needs to be running from everything I can find. How can I get it to work and update the software?

Did you get an error message/number?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Poketmac Crashes 4.1.25 with Pearl 8100

Hi!
I have problems to sync my bb pearl 8100 with my macbook pro (Intel, Leopard 10.5.5).
I installed PocketMac, restart, opened the programm.
The i want to change the settings "Advanve Pref" of AdressBook etc.
After i click on the "Pref" Button, my mac says for example "Prgramm ABRimContacts crashes"...ignore, report, start new.
I hope u understand my main problem.
Please help me!
Chris

This shouldn't happen! There is no reason that one device (8800) will work and other (8100) will not. Please confirm the OS version on both of the handheld. Are you getting any sort or error messages?
Message Edited by tanzim on 04-15-2008 12:18 AM
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

BB- pearl 8100 - JVM error 547

Similar Messages

Maybe you are looking for