Bb phone is not booting properly

Hi, can someone give me a solution please, I removed my girlfriends os version 5 blackberry 8
900 javelin's battery to reset the phone, now all the phone does is, it shows the
red light signal, then boots to a point and switches off and starts the booting sequence all ove
r again and again.....till now the phone had now fully booted yet! Pls help

Maybe the phone needs a newer OS.. I mean, there's an update available.. Don't forget to back your phone up before you installed the new software..

Similar Messages

  • Cisco 7941G phones will not boot up after factory reset.

    Cisco 7941G phones will not boot up after factory reset.
    The following happens.
    1. Speaker light lit (Green)
    2. Phone displays a firmware upgrade page (see attachment) for a few minutes. (Doesn't seems to be upgrading, but it "saids" upgrading)
    3. Saw Cisco logo with a Java Powered page.
    4. The whole thing loops again and again...
    I think the reason why the phone isn't booting up is because the phone needs to know where to find the configuration/firmware files from a tftp server. I do have a TFTP server, but normally I need to go in settings to change the alternative tftp server, but the thing is that now I can't even press the settings button...
    Please help.

    How many phones were reset and upgrading at one time? What is the setting of the TFTP Maximum Serving Count (Advanced TFTP Service Parm) on each of the TFTP servers?
    Sounds like too many devices trying to use TFTP at once.

  • When I click on itunes, it tells me that thesoftware required for communicating with ipods and mobil phones was not installed properly. I have not changed anything on my computer so I'm not sure what I should do? Help

    Help, When I click on itunes on my computer it tells me that the software required for communicating with ipods and mobil phone was not installed properly. I havent' changed anything. Does anyone know what I should do? Thanks

    See the second box of Troubleshooting issues with iTunes for Windows updates.
    tt2

  • My phone will not charge properly when i put it on charge it comes up with charging is not suppoted with this accessory i've only got it plugged into the plug for charging // Help

    My phone will not charge properly when I put it on charge it comes up with yellow exclamation symbil and infoms me that charging is not supported with this accessory I've only got the charger plugged into it well the plug and conecting cable any help

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • HT201412 i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.

    i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.

    Okay. You are not entering the correct passcode. If you forgot or it is not taking your passcode then you will have to restore.
    See http://support.apple.com/kb/HT4113

  • After updating iso 6.1.3 in my 4s my phone is not working properly

    After updating iso 6.1.3 my 4s is not working properly the main problem is touch is not working properly and battery problem also there pls anyone have some solution

    IOS 6 has had a lot of issues to date. I have a possible solution to offer but I cannot  be sure it will work. Two ideas.
    1. Reset the phone: hold the lock button and home button in at the same time for 10 seconds. This does nit erase anything, it's basically like rebooting a computer.
    2. Factory reset: Hook up to a computer and go to iTunes. Sync the phone (if possible). Once synced, in the summary screen select factory reset (or may be another name, I'm working from memory) it's right beside update software. This will completely reset the phone, you will need to restore it after the reset it complete. I don't know if this will help you, but it may. I hope you can fix it, good luck!!!

  • Phone Controls Not Working Properly In my Lumia 930

    Dear Sir,
    I'm Using a Nokia Lumia 930 phone, just purchased a month ago. for the first time i on my phone, there were few o/s updates appeared and i made a update. when I plug my headphone to the phone, controls are not functioning properly. the button in the headphone
    not working and sometimes it works but i tried with other Lumia device with my headphone, it's working perfectly. Please give me a solution.
    Thanks

    For help using Windows Phone please post on the Windows Phone forums on
    http://answers.microsoft.com .
    The Tools for Windows Phone development forum is for developers to discuss writing their own Windows Phone apps.

  • Phone will not boot, any hope to Recover Data?

    Is there a way to get data off a phone that will not boot up?
    My phone is constant rebooting. It reboots over and over and hangs on the eyeball screen, never getting to the home screen. (I plan to do a Factory Reset.)
    I hadn't done a back up recently, and had been saving photos on the phone memory rather than the SD card (lesson learned.)
    Is there any way to recover any of the data before doing a Factory Reset?
    I am aware of the "Volume Down, Power button" start up to do the reset - is there anything there that will allow it to be connected to the computer to copy files off?
    ... By the way, I have started the phone using Volume Down / Power start up and selected "Recovery" and I get the icon of a phone with a red triangle with an "!" inside it, but my computer does not recognize the phone when it is plugged in via USB.
    Thanks.

    I regret to hear that Safe mode is not working correctly. Below I have provided the instruction just in case.
    Safe mode
    http://support.vzw.com/clc/devices/knowledge_base.html?id=31062
    If the device will not go into Safe mode, I would agree with Budone and complete a hard reset
    Hard reset
    http://support.vzw.com/clc/devices/knowledge_base.html?id=30946

  • Phone is not booting

    My BlackBerry Torch 9860 is not booting.
    The booting white line stops at E of the BlackBerry.
    What do I do to rectify this issue.
    I have tried battery pull a couple of times.
    Femi
    Bamidele

    Thanks so much for your response and assistance.
    The Desktop software does not recognise my phone so I cannot back up. I actually backed up my data before the issues started.
    I appreciate.
    Bamidele

  • 667mhz Titanium not booting properly

    I have a 667mhz powerbook Titanium DVI. It will boot into firewire mode perfectly, it will boot into OSX or os9 but with no video at dvi port or on lcd. One out of 100 times it will boot into open firmware and then I can boot it into OSX WITH all video functioning. The other 99 times It fails to boot into open firmware, and I know this because it will not boot into OSX with the bye command or reset-all that I type into my then blank screened mac. I suppose I will be told it is a logicboard problem. But this doesn’t seem logical. It seems more likely to be a bios problem, Either a faulty setting or a corrupted bios.
    I would like to reflash the bios with the 4.2.9 bios update for the non DVI titanium, but I know it will not work. I would need to resedit my bios flash to permit the update. I need to know how do this. I don’t suppose it is possible to have the bios properly reflashed. Any ideas?

    James,
    Just noticed your topic, and sorry I don't have much in the line of suggestions, but wanted to suggest that you post back with your computer specs and especially which OS you are using on the machine (eMac, I assume from your choice of forums). This will help those trying to help you troubleshoot your issue.
    OS, third party apps, updated third party hardware, and especially any troubeshooting that you have already tried such as Repairing Permissions (before and after the update).....this type of thing will only help those to help you get to the bottom of your problem.
    I personally just downloaded 5 updates today (finally had the time to catch up) such as three Security Updates and the updated versions of QuickTime and iTunes. All, fortunately, went very smooth although I do not have any third party add-ons to hardware such as upgraded video card etc. or any third party apps that interfere with the System such as any Menu Extra apps. I also, have always been in the habit of Repairing Permissions with Disk Utility before and after any software updates....especially the security updates which seem to be the most troublesome for most users that experience problems such as yours.
    It should help also to let us know which updates you had updated (security updates or apps such as Quicktime or iTunes etc.).
    littleshoulders [:-)

  • Lenovo S 850 phone is not working properly(Please do not buy Lenovo phones)

    I bought the phone on date 16/08/2014 from The Mobile Store,Delhi.After 2-3 weeks I was facing problem with the touchpad and was given in the service center(Service No-SRIN2411410070001(Abhishek Technologies, Ahmedabad)). I got the phone from service center after two weeks.
    After 1 week from service I am facing more problems in the phone. List are described below:
    1-Battery Problem: If I talk, play a Video or games it drains the battery very quickly(in between one and half hour)
    Previously i have watched two movies(around 5 hours) still the battery was on 50 percent charge.
    2-Auto Restart: Yester I found the phone is automatically restared again and again(not stopping) and I switched off
    it, after words works as expected. But happening
    3-Profile Auto Change Vibrate:When My phone is in General mode and made a call, Its automatically changed to vibrate mode after call.
    4-Text pad in Desktop:There is no link for text pad in Desktop/Home screen, But still it is displaying there some time.
    Not going from there if i touch on back. After restart it was gone.
    It is not completed 3 months and Once it was on Service center and Seceon time this is happening with loads of problem.Can you please take over on all this issue. Can you please provide me a new phone, Because everyday I am facing a new problem.
    If you go for any local brand also I thik that phone should not have this much of problen is such a few time.
    I am using LENOVO Laptop from last 8 years and still it is working fine.SO I have gone for the Lenovo mobile, But I did a wrong choice.I am totally unsatishfied.

    are you talking about voiceover where the phone is reading things out loud to you? you have to double tap things in voiceover in order to select them. you'll need to go to settings > general > accessibility > and turn off voiceover there

  • New system does not boot properly

    I just set up a new system with:
     a MS-6728 Neo2 FIS2R Mobo,
    1gb Geil PC-3500 RAM (2x512),
    2.6C proc.
    2 Maxtor 120gb IDE drives RAID 0 with the onboard promise controller.
    Lite-On DVD burner
    ATI radeon 9800 video card
    Enermax 300 watt power supply with:
    3.3v - 28amp
    5v - 30amp
    12v 22amp
    170watt total 3.3/5 combined
    My problem is that my system NEVER boots up normally.  It always freezes in the bios startup.  The D-bracket stops at almost every possible combination of led's, which according to the manual the problems were:  Testing RTC, Initialize Video interface, Testing memory, Initializing floppy controller, Memory detection, Decompressing bios to ram, possibly more.  Sometimes I also just get beeping, either a continuous beep or 8 beeps.  A few times it would display the bios startup screen, but halfway down would be gibberish characters and would be locked up.  When I then turn the computer off then on again, the bios is reset at least somewhat(i know because I usually disable the full screen image on startup) and says memory timings are too tight, and I have the choice to enter bios or hit any key to automatically fix things.  If I hit any key it will boot up ok.  However when I restart/turn off the computer, the next time it again does not boot.  I tried upping the ram voltages from 2.5-2.9v, and that seems to stay that way in the bios, even when it resets itself.  Everything else is set to auto/slow.  If I try to manually adjust the memory timings, even to the slowest possible settings, it does not boot, and I must turn it on/off a few times till the bios resets again, with the boot process stopping at one of the possiblilitys mentioned above.    Using the info tab on speedfan, I got the memory info, and it displayed the voltage at 2.5v, not sure what that means but it is strange.  
    What I have already attempted:
      I sent back the ram and got a new set, which hasn't changed anything.  The first time the other ram failed memtest, this time it passed(for about 2 hrs).  So I don't think its the ram.  
      I borrowed an antec truepower 430w powersupply, which had no effect.  
      I went back to bios version 1.3 from 1.9, which also seems to have no effect.  
    I was hoping to overclock the system a bit and enable performance mode etc etc, but now I'll be happy to just not have to go through a song and dance everytime I restart the computer.  This is only the second computer I have built from scratch, and the first with raid, but that seemed to all go ok.  Please help me diagnose the problem!

    I too am having problems with my system.
    865PE Neo2-FIS2R
    2 Maxtor 120GB S-ATA drives, RAID 0, Promise
    2 512MB Geil Ultra CL2-3-3-6
    HP CD-RW
    What IDE settings are you using?
    E.g...Native? P-ATA Only...all of those settings
    For me...sometimes XP will install and boot...but eventually system is unstable and XP crashes and corrupts itself...Event Manager errors different each time
    Someone mentioned problems with Maxtor and AMI BIOS...anything I should keep in mind?
    Sorry about all the different questions.  I'm sure exactly where my problem lies.  MSI thinks it may be my memory AND/OR on-board IDE controller since I can't get the on-board Intel RAID setup to consistently "see" and setup my RAID drives...even when it has worked...XP doesn't like the Intel configured RAID drives.  Also tried just one S-ATA drive through on-board Intel and Promise.  Next I will try a plain old IDE Hard Drive...no S-ATA...and make sure my memory passes memtest86+ testing.
    Any other gems you can offer for this config???  Thanks.

  • IBook G3 not booting properly

    My iBook G3 will not boot up anymore. It just started today. Everything including the finder froze up, and I had to hold down the power button to turn it off. I went to turn it back on, and I got a folder with a flashing mac face and a question mark on it. I have been told this only happens in OS 9, but I am (was) running 10.4.11. All it does is boot to that screen, and I can't boot from the disc, because I don't have it. Any help would be appreciated. Thanks.

    Hi, and welcome to Apple Discussions.
    What happens if you try holding down the x key during startup? (This will sometimes do a force-boot into OS X.)
    Have you tried resetting the PRAM?
    If that doesn't work, will it start up in Safe Mode? (This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk, so let it attempt the Safe Boot for a long time.)

  • Phone numbers not formatting properly

    I just got a new iPhone 4S.  The numbers in my address book don't seem to be formatting properly.  They just have a string of numbers, e.g.., 6025551212, rather than the normal format of area code in parentheses and a hyphen in the number.
    This goes beyond aesthetics. The phone doesn't match numbers, so my recent calls list and my SMS history don't have names associated, even though almost all of the numbers are in my address book.
    Here is some more information: I just got the iPhone 4S today, and I plugged it into my Mac and chose to do a restore from backup.  I selected today's backup of my old iPhone 3GS.  Everything else went smoothly.  (note that the number didn't transfer... this is a totally new phone number on a totally new account.)
    Even more information that might help in troubleshooting this: when I go into Settings --> Phone, it shows my number formatted in the way I described above (e.g., 4805551212).  But here's the weird thing -- I can't edit that!  There is no rightward-facing arrow that indicates you can click on it, and repeated clicks don't do anything.  On my iPhone 3GS (which formats its number correctly), I can go in there and edit it.
    I should also mention that this is a U.S. phone with a U.S. number on a U.S. carrier (Verizon), and most of the numbers in the address book are U.S. numbers.  So there aren't any strange international issues going on.  I have searched through the settings and U.S. is selected for all of the international settings I can find.
    Finally, this is a phone issued by my company, and the IT person opened the box, "provisioned it," added it to the corporate account, got a new number assigned to it, etc... Does that have anything to do with it?
    Thanks for the help!  I'm pulling my hair out!

    I found the solution on an outside forum: http://forums.tipb.com/iphone-4s-forum/221242-iphone-4s-contacts.html
    This seems to only affect Verizon devices. If you are not using Verizon, this fix will not work for you.
    Here is the summary of the steps I took to correct the issue:
    1) Open the Phone and dial *228. This is a Verizon over-the-air programming number.
    2) When the system answer press 1 for "Program or activate your phone"
    3) Wait for the call to disconnect. You should get a prompt stating something like, "Settings updated."
    4) Open the Task Manager and kill the Phone, Message, and Contacts Applications
    5) Wait a few minutes (I waited 3 just to be extra safe)
    6) Open the Message App to verify the fix.
    If you are still broken, kill the Message App again, then reboot your phone.

  • My phone is not working properly.

    Today, I went on my phone, and went to type in my password, but it started typing it backwards. So after 5 tries, my phone said I have to type in 'blackberry' so I went to do that, and again it was backwards, but was using different symbols instead of the letters. My scrolled doesn't work, it scrolls once, then freezes. What do I do? I updated my phone, but its not done anything. 

    I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see if the behavior continues. If not, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    If the behavior continues in Safe mode, then more drastic means may be needed. But, before that, be sure to get a complete backup of your BB ASAP:
    KB12487 How to back up BlackBerry smartphone data using BlackBerry Desktop Software for Windows
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for