BB stuck loading after pulling battery during handheld wipe

My BB freaked out and IT manager and I decided to do a handheld wipe. The wipe went for 30 minutes and we decided it was stuck, so we pulled the battery. Now, the unit won't turn on at all - I have white screen with spinning hourglass and red flashing LED. Any help? Can't reload anything because Desktop Manager doesn't recognize that the BB is connected.

My guess is that content encryption was enabled. If this is the case it can take a couple hours to perform a wipe.

Similar Messages

Captivate 7 Stuck Loading after installing Microsoft Office 2013

Before the problem started, I initially had Adobe Captivate 5 (not 7) and have been working fine until I installed Microsoft Office 2013. As I tried to start Captivate 5, it gets stuck on the loading page—the welcome screen never shows up. After I checked this blog on the forum, which is blaming 3rd party fonts that may cause this issue to happen—I never installed any 3rd party fonts—I wasn’t sure if Office 2013 come with additional fonts that are not compatible with Captivate 5. So I removed Captivate 5 and installed the trail version of Captivate 7 (32 bit) thinking that Captivate 7 will be okay with any additional fonts that come with Microsoft Office 2013. Still having the same issue—can’t get the welcome screen—stuck on the loading screen. Regardless, whether I try to start the software or try to open an existing Captivate file by double clicking.
As per another blog on the forum, I also tried removing/renaming Captivate folder located in C:\Users\MYUSERID\AppData\Local\Adobe but that didn’t help either. Now I have completely removed Captivate 5 folder from the directly as I have installed Captivate 7—still stuck with the same problem.
I am running Window 7 Professional (32 bit), have the latest version of Java SE 7 Update 25, downloaded latest AIR update and of course every time removed any software, I did restart the computer to update the registration keys before installing a newer version of a software.
You help and advice will be greatly appreciated! Many thanks!
Regards,

Hello Parth.
Many thanks for your help! It worked!
After deleting every font I could (out of 820 fonts, ended up deleting 687 fonts--only 133 remined that were proected-system fonts) I am successfully able to launch Captivate 7. I guess Microsoft Office 2013 did install some fonts that conflicted with Captivate 7 (even version 5). By the way, Myriad Pro, my favorite font when it comes to Captivate, is also system-protected that I couldn't delete. I now just have to work on Part B, and slowly reinstore the deleted fonts in small batches to keep Captivate working.
Thank you again for the tip ... much appreicated!
Regards,
Farooq

Why is CMC stuck "Loading..." during Assign Security ?

Hi,
I'm scratching my head and ready to open a SAP ticket if I cannot get a resolution here.
In CMC, I am trying to change User Security settings on a folder. When I choose an existing Group, then, click on Assign Security, the pop-up window displays Loading... indefinitely, until I click X and exit.
This happens where ever I try to use CMC, my host CMS server using IE7.0.5730.13 (Java 1.6.0_03), my Windows 7 laptop using IE 9.0.8112 and Firefox 18.01 (Java 1.6.0_29).
I'm using Product version: 12.5.0.1190
Weird thing is Permissions Explorer does allow View Security to work.
Add Principals, also displays a blank screen after I click on Save and Assign Security.
Any help to resolve is much appreciated!
Al

No, I have not redeployed my Tomcat server.
I do have a SAP Support Message open for this.
So far, I have sent a trace file recording this issue to SAP, but, SAP did not find anything in the trace.
I am able to "Add and Assign Security" in my Development system. So, SAP recommended using my Development Tomcat server to log into my Production CMS. However, I am still unable to "Add and Assign Security" in Production while using the Development Tomcat server. This appears to prove something is wrong in my XI 3.1 SP5 CMS.
I am waiting for SAP to advise what are my next steps.

Why can't i use my ipod after the battery died during a reformatting? i've tried many things to fix it.

Why can't i use my ipod after the battery died during a reformatting? i've tried many things to fix it.

I do not understand your question. You do not formate an iPod. Please explain better the problem. what lead up to the problem and what you have tried so far.

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Why is my iPhone 4S stuck on a 1% battery charge, despite being charged for 30 hours?

I have had my iPhone 4S for barely ten months. In the past, I have had small problems that would either fix themselves or just stop occurring, such as freezing issues. But recently my phone was drained to a 1% and after realizing this I quickly plugged it into a car charger. About 15 minutes later, I noticed it had switched to an 100% battery charge. I blew it off and the next time I glanced at my phone it was back to 1%, so I turned it off thinking it would reset it and I would leave it to charge. I came back to the phone maybe 30 minutes later to power it up and it displayed the red sliver of battery with a lightning bolt underneath it. It stayed like this for a good while and eventually came on. Since then it has been stuck on this 1% battery charge. One last thing I noticed was that the bolt inside of the battery on the top right hand corner sometimes shows a plug, saying its fully charged. I'd rather not turn it off because I'm not sure it will come back on. What do you guys suggest I do?

I have this same issue... the phone was fine, then 3 days ago then I noticed it was draining itself whilst on charge. Now it charges to 1% and lasts all day on that unless I reboot, then it just says plug it in and wont reboot! I have had a 100% charge, but it drained down to 9% in under an hour and then stayed at 9% all day. This is obviously an issue, so why is Apple not sorting it out?
Also, these kind of comments (BELOW) are about as useful as, "is it plugged in?"
"diesel vdub Atlanta, GA
Basic troubleshooting from the User's Guide is reset, restart, restore.
Try each of these in order until the issue is resolved."
I have tried 3 cables, 2 wall chargers and 2 docks, so it has nothing to do with those. I have cleaned the connections, so it's not dirt. It isn't water damage as the phone has been nowhere near water.

Module 'asus-nb-wmi' stopped being auto-loaded after kernel update

Well, the module 'asus-nb-wmi' which takes care of some FN keys and keyboard backlight stopped being auto-loaded after the latest kernel udpate (3.9.3), so I had to add it to /etc/modules-load.d/ to get it working. This has happened before, between kernel updates and I had to re-install arch to fix it, but now I found that manually adding the module is a nice solution, but I want it to be loaded automatically or at least know why does this happen. Kernel modules, such as this one, should be loaded automatically right?
Best regards.
Last edited by DanielRS (2013-07-04 19:54:48)

I think there is a valid question here; Same thing happened to me.
Upon a default install of arch, the module was auto-loaded without the user touching any configuration files
at some point during kernel updates, the module is no longer auto-loaded
the user then has to find out what is happening and go add the module to the appropriate config file to force load on boot.
So the larger question is; without config files being taken into consideration, how does the kernel decide what modules to load? f
I know it has something to do with the hardware that it detects, but am unaware if this is something within the RC or systemctl booting system, or if this is part of the kernel.
I'm going to dig around some more on the internet, as i'm sure the answer is out there somewhere.. but if someone that is on this forum happens to read and know the answer, it would be nice to know
thanks

HELP. BBM frozen. Have pulled battery.

I have the Curve 8330. Everything on phone works just fine. Recieving and sending texts, internet, Facebook all responding. BBM has not been working since yesterday. Icon will not even open to access friends list, etc. Just frozen and will not respond. Have pulled battery several times. Neen your input and help please and thanks..Christine

If that doesn't work, consider upgrading to the latest device OS for that model.
See the link below, for the download and simple installation instructions.
First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Garageband takes longer to load after the 5.2 update

I've found that Garageband '08 does not load correctly with the 5.2 update. Apparently, Garageband takes up to a minute or longer to load During this time, the initialization window is active, the Finder acts somewhat slower, and Garageband is listed as unresponsive in the Dock. Usually, it loads after a long period of time, and works, but once I quit GB, it has to load up for a long time again. I've seen in other threads that external iSight cameras and other audio-related peripherals can by the cause of this, but I do not use my FireWire iSight camera with my MBP, nor do I have any external speakers and whatnot. Right now, I just have Office 2008 installed alongside the other applications.
My question is what files, if any are conflicting with GB, should I look for? Or what would fix the problem as a whole? I understand that there were some other topics about this issue, but I don't think anyone has mentioned any tips in the past few days. I use GB a lot, so I could use some assistance. Any help would be appreciated.
-MacUser

Since I end up waiting at least 30 seconds to 2 minutes or so for GB to open, I need to figure out if I should just reinstall OS X with the restore disks and leave it at that until a fix arrives... I'd rather not though. Apple, come on, release a patch or some sort of fix for it!
I did try to recreate the problem by using a FireWire iSight but even after doing that and fixing it, nothing changed. I saw in one thread that some people have GB working correctly for them while others do not, so surely there is something somewhere wreaking havoc with GB. This is really odd.
-MacUser

Bootcamp Wont Load After Yosemite Install

Loner T,
My bootcamp does not load after Yosemite install.
Thanks

This is the first part of the recovery procedure. In your case, you have two OS X versions, so standard layout is not usable.
Please install GPT Fdisk (aka gdisk) (http://sourceforge.net/projects/gptfdisk/) if you have not done so yet.
You need to use the following steps. If you see any error messages during the following steps, please stop and post back here with the error message. The following steps have values from your Testdisk output (and you can verify) in Steps 7 and 8.
Rebuild GPT5 using start/end offsets
Sudo gdisk /dev/rdisk0
P (print the full list of parts)
D (delete)
5 (part 5)
N (new part)
5   (part 5)
841717760 - Start offset in bytes (start point for Bootcamp part)
+135055353 (Size offset as opposed to End offset)
0700     (Windows part type)
P           (print list of all parts just to see what changes will be made)
W         (Write the new GPT)
Y           (Yes! really write the new GPT)
This will delete and re-write the GPT partition info for /dev/disk0s5.
Reboot. Test that you can see the Bootcamp volume in Finder and see files in the Bootcamp volume.

Import Screen Stuck Loading!

Hello,
I am having an issue importing a video to edit in Adobe After Effects CS5.5 on my Macbook. I make a new project and make a new comp, but when i go to file and select import a file, it brings up a screen that it normally would, and its like the Finder menu, and i have it selected under Photobooth so I can upload Photobooth window, and it begins to load, but then my computer says "Community Toolbar" (I have my computer set to read out things that need attention) and it is stuck loading, everything else works though but it doesn't let me do anything with the window, including quit it. HELP!

No idea what you are trying to tell us. Your description sounds confusing. Screenshots perhaps? And if some sort of system extension is blocking file access, while not simply disabel it for the duration? This is by no means normal and definitely not related to AE. Seems more like whatever tool you are using has associated itself with specific file types...
Mylenium

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours and

My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.

Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen

Imovie 08 refuses to load after upgrading to Leopard

I got Leopard for christmas and after upgrading imovie worked fine until I upgraded to imovie 08 with ilife. Now it refuses to load after it bounces it just stops and acts like as if I didn't even do anything. I've tried disk utility, and a bunch of other stuggestions but it dfidn't work.

Yes I did all of them. All of them appear to load except for imovie. and I did the installment of ilife 08. For some reason a folder appeared for the older version of imovie and that works fine even though i installed iLife 08, it suddenly made a folder today saying imovie (old version).
I don't get why it is doing that when the others work just fine.
Yes the display options are correct
The only one I know of is the divx codec I believe that is it.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

Macbook no longer "sleeps" after 'low battery' warning, just suddenly dies

My macbook (just over a year old) used to give me a warning with 10 minutes left that it would sleep so as my data was not lost, if I didn't plug it in. However, recently, it has stopped doing this - instead of sleeping, if I don't get to a power source in time within 10 minutes, it simply cuts out, with the sound of the hard drive stopping - like if you shut down a frozen macbook with the power button.
This is REALLY irritating - what's going on? Why does it not sleep anymore, and is there any way to fix it?
I'm on Tiger 10.4.11, with an intel macbook...

Same Problem here. Tried several calibrations, smc and pram zap (well i guess there is no pram any longer so it zaps something else). Now I found another post where they talk about the battry 1.2 update. http://discussions.apple.com/thread.jspa?threadID=1449128&tstart=60
I remember when trying to do an battery update to 1.3 manually the update told me that it is not for my macbook. But - I found the 1.3 update Bundle in /System/Library/Configuration/BatteryUpdater.bundle
1. I Removed /System/Library/Configuration/BatteryUpdater.bundle from my system
2. rebooted
3. Emptied trash
4. Installed update 1.2 by Softwarupdate.
I will now do an SMC reset an then let the battery run low and watch what happens.
Then do a calibration.
I have the problem here in different ways. Sometimes Macbook shuts down suddenly after low battery warning, sometimes it sleep, almost never it hibernates.
My Battery was replace after showing the x symptome about a year ago but now it looks bad again
Full Capacity (in mAh): 3866
Remaining Capacity (in mAh): 1982
Power Consumtion (in mA): 1564
Voltage (in mV): 11974
Number of cycles: 148

BB stuck loading after pulling battery during handheld wipe

Similar Messages

Maybe you are looking for