BB Torch - bluetooth tethering for laptop internet use: "Error 720: A connection to the remote computer could not be established

Trying to set up Blackberry Torch for laptop tethering...bluetooth. I have connection/drivers/etc. but keep getting error message: "Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection." Where and what do I chancge setting to so this will work?
I have synched my phone and laptop wirelessly across other internet connection....just cant get this above to work. Anybody know how to fix this? Thanks!

Hi,
Since it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
If system restore doesn’t help, please also try the following:
1. Check if you can establish the VPN via other connections except the connection through the UMTS card.
2. Reset the PPTP and L2TP WAN miniport with running the following commands one by one in an elevated command prompt:
Netcfg -u MS_L2TP
Netcfg -u MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_L2TP
Then reboot the computer and see how it works.
Meanwhile, I would like to share the following with you for your reference:
Troubleshooting common VPN related errors
Hope this helps. Thanks.
Nicholas Li - MSFT

Similar Messages

VPN ERROR 619 :: A connection to the remote computer could not be established, so the port used for this connection was closed

I have been searching endlessly for this issue. Every time I try to connect to a VPN connection I get the error above. Thank you for any relevant input concerning this matter. My NIC is Qualcomm Atheros and I'm in Win8.1 x64.

everything normal before?
is there any changes before this issue happen?
turn off your antivirus and firewall, update the latest VPN client software, if still not working go to security settings and change the VPN type automatic to PPTP. And also change data encryption configuration to Optional and select CHAP & MS-CHAP v2.
If still not working try with other internet connection and try to contact your VPN provider

A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline

When I select “Update existing software in QuickTime Pro I get an error message saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
This has persisted for several weeks. Any help will be welcomed as I do not know how to contact QuickTime support via Apple.
I am using Windows 7 64 bit.
Many thanks

I was able to download and install the latest version of iTunes (10.6.3.25) without a hitch. After the reboot I tried again to update my exisitng Quicktime Pro software as described in my original posting and got exactly the same error message.
If it happens that there is no software to download because I am already running the latest version, surely a message to that effect would appear and not the one saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
Still seeking advice if possible
Cheers

I cannot connect to the internet using apps but im connected to the internet!

i cannot connect to the internet using apps but im connected to the internet!

What makes you think that you are connected to the internet then?
Try:
- Resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset ntwork settings: Settings>General>Reset>Reset Ntwork Settings.
- iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

[svn:fx-trunk] 15021: merge 15020: update ASDoc for execute() to use FaultEvent instead of ErrorMessage in the fault handler

Revision: 15021
Revision: 15021
Author:   [email protected]
Date:     2010-03-25 07:35:43 -0700 (Thu, 25 Mar 2010)
Log Message:
merge 15020: update ASDoc for execute() to use FaultEvent instead of ErrorMessage in the fault handler
QE notes:
Doc notes:
Bugs:
Reviewer:
Tests run: checkintests
Is noteworthy for integration:
Modified Paths:
    flex/sdk/trunk/frameworks/projects/datavisualization/src/mx/olap/IOLAPCube.as

*bump* I desperately need to get this fixed for work - I hope someone can please find a solution or point me in the right direction!!

HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

What version of iTunes are you using? The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
B-rock

I cannot play music from my library on either my external drive or my laptop - keep getting same message "___ song (all of them) could not be used because the original file could not be found. I have tried changing the path in prefernces many times.

I cannot play music from my libray on either my external drive or my laptop. I keep getting the same message - "___ song (all of them) could not be used because the original file could not be found. Would you like to locate it?" I have changed the path several times under preferences and it still won't recognize any songs from either my laptop hard drive or my external drive. I can't play any music at all.

I think I've fixed this on my machine. If you look in the ITunes folder there is a subfolder called Previous iTunes Libraries. In my case for some reason this contained the one which had always worked and a new one was in the main folder. I closed iTunes, deleted the new one, and moved the old one back to the main folder, then opened iTunes. It then rebuilt the library and it plays correctly. Hope it works for you.

I cannot BUY any iPhoto products. Every time I try to submit something, I get an error message - A coonection could not be established at this time - I have been trying to buy a photo book for 2 days now with no success. I am using iPhoto 09

I cannot Buy any products from my iPhoto 09. Every time I try to submit something, I get an error message - A connection could not be established at this time. There is nothing wrong at all with our internet connection, and I have been through all the suggestions on the Apple help page, and spent 2 hours on the phone this morning getting passed round various call centres. They claimed they had not heard of this problem before. I successfully purchased a calendar in Dec with no problems at all - so I just don't understand!

Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
then boot into safe mode and try again
LN

I5 still using ios6 as of last night the phone will not connect to my Internet, in settings it says connected with the check mark however there is no wifi icon at the top of phone, have done everything possible to resolve... My i4 and pads are fine,

I5 still using ios6 as of last night the phone will not connect to my Internet, in settings it says connected with the check mark however there is no wifi icon at the top of phone, have done everything possible to resolve... My i4 and pads are fine, I've had this phone for 8 months with no problems until last night , AT&T not any help,apple wants $ I thing it's a software problem.. Any one had this issue?

- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Using on WiFi to connect to the internet.

Can I use only WiFi to connect to the internet, like web surfing and downloading?
I'm not in the US so I don't want to use the service provider's EDGE, because it is too expensive.

Guy-CP wrote:
Can I use only WiFi to connect to the internet, like web surfing and downloading?
If you don't have a BlackBerry Data Plan, you will not have access to any of the BlackBerry data features and applications.
Some third party applications (like Pandora radio or BerryWeather) will connect via WiFi.
The Opera Mini browser will work, and can use GPRS settings, if you set the TCP connection for your current service provider.
Read this: http://www.blackberryfaq.com/index.php/What_are_the_TCP_and_APN_settings%3F
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS3988 My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

Be sure you are checking the email account that you used to set up the Apple ID you used to create the iCloud account. Also, be sure to check your spam/junk folder as well as your inbox. The email you should receive looks like the image below. When you get it, click the Verify Now link.
If it still isn't there, try going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right look for a link to resend the verification email.

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2

Using Photoshop Elements 12 on my MacBook Pro laptop, when saving a file I have been working on I get the following message although there is at least 50GB free space on the hard drive: Could not save because the disk is full.

I have been making Christmas Cards, working in layers and then flattening the image. However, I am unable to save the final image as I get the following message: Could not save because the disk is full. Looking at the system report for my laptop shows there is 52GB of free space.

Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point.

Adobe Photoshop CS4 message: "Licensing for this product has stopped working." I have the serial number but not the media. How do I use the software?

I recently tried to use Photoshop CS4 that I have on my computer but I get the message:"Licensing for this product has stopped working." I have the serial number but not the media. How can I use this version?

You can get the installer here: Download CS4 products
It will install as a fully functional 30 day trial. Entering your serial number will convert it to a permanent version, Standard or Extended, depending on what serial number you purchased.
If you still have the license problem. get back to me with your OS details and the error code.
Gene

BB Torch - bluetooth tethering for laptop internet use: "Error 720: A connection to the remote computer could not be establishe​d

Similar Messages

Maybe you are looking for

BB Torch - bluetooth tethering for laptop internet use: "Error 720: A connection to the remote computer could not be established