BB upgrade, Torch rebooted, now BBM won't open. Any suggestions?

My BBM won't open. I am guessing it has to do with the BB software upgrade which I downloaded. Reboot took place that night. Any suggestions appreciated.

Fixed yet?

Similar Messages

  • Safari update to 5.1.5, on snow leopard, now safari won't open any web page.

    Just installed Safari update to 5.1.5 and now Safari won't load any web page. Running snow leopard on an iMac.  How do I fix, or revert to previous version of Safari that did work, keeping in mind, can't access internet on that computer since Safari won't load a web page (Firefox, Chrome, Opera have never worked on that computer, although Firefox worked fine until I upgraded OS to snow leopard).

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Safari won't play youtube videos anymore. I've never had trouble in the past. I switched to chrome but then back to safari and changed the default browser to safari. Now safari won't open any sites that require a user and password. Any suggestions?

    Hello everyone,
    I've recently been getting error messages on youtube videos when using safari. This never used to happen. I tried using chrome but it didn't take care of the problem. When I set my default browser back to safari, safari won't open any websites that require a username and password. Any suggestions?

    My case is different from those listed below.  First, I'm running OS X 10.8.5 and Safari 6.0.5.
    My problem is this:
    I run a Google search, say, "youtube somesong", and from the hit list returned from google I
    pick some selection. Youtube launches and plays the video without problems.  However, when
    i click on any of the alternate videos from the page's  vertical list, only the name of the chosen video
    appears beneath the video I just watched.  The new selection itself is not loaded by Safari.
    This occurs for any selection I choose.  My way around this problem is to force a Safari reload of
    the page by using the keyboard shortcut, Command-R.  This fills in the old video window with the
    video I just chose.  Can I conclude that this is a Safari issue alone, or is it a Safari/Youtube combo gotcha?  Anyway, the present condition *****.
    This problem began sometime after i upgraded to Mountain Lion.  I have reset Safari and have also
    deleted the Youtube.com Cache, Cookies, and Local Storage from the Privacy settings under
    System Preferences. I have also tested the problem by running Safari in 32 bit mode (no luck there).
    If anyone out there has experienced this scenario, I sure could use a little help here.

  • My iPad was printing to my HP wireless printer and now it won't..any suggestions on what I might try to get it back?

    I was able to print from my iPad to my wireless HP printer and now I can't.  Any suggestions on what to do to get it back?  Will resetting network settings help?

    Are you getting any error messages - or is it just saying No Printers Found - if the latter this has happened to me - I have 2 networks on my airport express (my network and one for guest access0 - sometimes my iPad switches to the guest network which does not have wireless printer on it ( i dont know why it does this) - if i switch the iPad back to my network the printer shows up again
    In fact see the No Printers Found message is a pretty good indication that the iPad has switched to the guest network

  • Upgraded I tunes now it won't open

    I upgraded my I tunes to 7.7 and now I cannot open my Itunes at all. It acts like it wants to open but then doesn't.... Help, any suggestions, very frustrating.

    I am so glad that I'm not the only one with this problem! My itunes also will not open AT ALL after the 7.7 update. I wish I'd never updated in the first place, it was fine before! Does anyone know how to email apple concerning this problem? I want to know if they are aware and if they're trying to do something about it. It seems that you can only email them with problems concerning itunes store not itunes itself. I don't know whether or not to just wait for another update/solution to fix this from apple or continue to struggle trying to fix it myself!?

  • Latest upgrade - downloaded and now iPhoto won't open

    Downloaded the latest upgrade. Then tried to open iPhoto, but it won't open, nor can I close iPhoto, it is just hanging there. Any suggestions please? Thanks.

    What version are you using?

  • How do I get iCal to sync to my iphone 4. It used to work and now it won't. Any suggestions will be most appreciated.

    How do I get iCal on my Mac to sync with my iphone 4.
    It used to work and now it doesn't.
    I am not on MobileMe or the Cloud.
    Any suggestions will be most appreciated.

    Hi Arezzo
    I'm asuming you are using iTunes then to sync? this can be done over WiFi or the USB cable.
    Review your setting for the calendar sync once iTunes is open and your iPhone is connected. Make sure your Calendars are selected to sync that you need. By default all calendars will.
    So the option i have for you is to reset the sync service and this will reset those settings in iTunes. Meaning that you will have to switch them on again in iTunes to sync. But this mostly clears unresolved sync issues.
    Please do yourself a favour and hit backup in iTunes before doing any testing. iTunes will then keep a local backup of your iPhone in case of any data loss.
    {added}
    open Terminal from your Utilities folder and paste this command in to reset. OS X 10.6 - 10.8
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full [press Enter]
    if it prompts for a password, just type your password and hit [Enter] again.
    Open iTunes then set your syncs up and it should then carry on again.
    Message was edited by: WaldoWTM

  • Upgraded my iTunes & now it won't open at all

    I just upgraded my iTunes to 9.02 from a really old version, about 10 minutes ago. I am fairly certain I followed all the steps correctly. I now cannot open iTunes at all from the table at the bottom of my desktop. The icon is there but it will not open. I'm afraid of losing EVERYTHING that I had in my old version. PLEASE HELP!! Thanks in advance. I'm not a happy camper.

    even if you use firefox, iTunes 9 needs Safari 4 to work properly.
    try running software update from the  menu. from that menu you can also choose +about this Mac+ to check which system software you're running.
    just update to/put Safari 4 on your machine and see what happens. you can continue to use FF.
    edited by the Jolly Green Giant (where Green stands for environmentally friendly)

  • Upgraded to photos now itunes won't open photo library.

    Had to restore photo library from Time Machine backup due to kids deleting it. Restored OK, opened Photos app and migrated library, works fine in photos app.
    However in iTunes under the sync photos tab with iPhone, photo library is greyed out and I cannot select it.
    Any ideas?

    Hello, bas.harbers.  
    Thank you for visiting Apple Support Communities. 
    I understand that iTunes will not allow you to select and library to sync with after upgrading to Photos.  It sounds like you may just need to set Photos as the system library preference.  Here is the article that will walk you through this process.  
    Designate a System Photo Library in Photos
    Cheers, 
    Jason H.  

  • Updated iTunes to the newest version and now iTunes won't open any more.

    Yesterday, iTunes was working properly.  Ran spy sweeper and PC has no viruses.  Opened iTunes today and it asked if I wanted to update to the newest version.  I did.  Newest version never installed properly.  Said a file was missing 2/3 through with installation. Tried to uninstall and reinstall completely and its telling this same file is missing.  Any ideas?  Using Windows 7.  Trying to connect with my iPhone 5.

    The error message I am receiving is:
    iTunes.exe - System error.
    The programs can't start because MSVCR80.dll is missing from your computer.
    Try reinstalling the program to fix this problem.
    (Which I have done.)
    Next error message is:
    iTunes was not installed correctly.  Please reinstall iTunes. Error 7 (windows error 126)

  • Fresh Install, Now Illustrator won't open any DWG/DXF files???

    Hey whats up guys, been having alot of issued with Illustrator (CS2) lately so I did a fresh reinstall.
    Everything seemed to be in working order until I tried to open a 2000 DXF file and got the "Unknown format and cannot be opened" dialog.
    I was sure that the CAD must be a 2004 or something so I expoted again and got the same issue. Then I looked a bit further and noticed that the File > Open menu doesn't even have an option for DXF/DWG.
    What could've caused this feature to get stripped out of a new install? Is there any way to fix this?
    Ryan

    What's up guys, quick update on the situation.
    After some more tinkering around I discovered that Illustrator couldn't even print any documents, as well as discovering some additional errors with the updates and Adobe Bridge.
    So somewhere along the line my "Adobe Suite" got all screwed up, I was even starting to get random error messages in Photoshop.
    In the end my solution was to uninstall Illustrator & Photoshop, then reinstall them both (PS first.)
    That seemed to reinstall a few Shared componenets (like Bridge) which got everything up and running again...glad it worked, but go figure.
    rg

  • My podcast app won't open, any suggestions?

    when i click on the app get a blank white screen then goes back to main screen.  have tried re-starting. 

    This is what I did:
    1a. Podcasts app deleted from the iPhone.  Doesn't show on any of the home screens on the iPhone.  The button next to the Podcasts app in iTunes says "Install".  Synching the iPhone with iTunes generates the message "The Podcasts app is not installed on 'Maggie's iPhone 4', so you will not be able to play podcasts on your iPhone"
    1b. Clicked the "Install" button for the Podcasts app in iTunes.  It now displays "Will Install"
    1c. Clicked "Apply" in iTunes to start iPhone sync.  iTunes shows "Copying 1 of 1: Podcasts"
    1d. Podcasts app icon is shown correctly on one of the iPhone home screens.  Previously, the Podcast app icon was a generic placeholder icon. 
    1e. Resyched iPhone and launched Podcasts app.  Everything now working properly.
    2 & 3. Didn't have to perform these steps, which implies that earlier suggestions contributed to the fix.
    Thanks for your help!

  • Help please!Photoshop Elements 8 editor won't open any files (windows 7)

    I have Photoshop elements 8 for my windows 7 laptop. I updated my laptop and now Photoshop won't open any files. I click on the psd/jpeg/png that i want to open(file,open) and nothing appears in the editor. even if i try by double clicking it the editor will show up but no file.i have tried restarting the laptop but it still wont work. I can't uninstall photoshop because it came pre-installed on my laptop and no disc or installer came with it. If anyone can please help me i'd be very gratefull.

    Quit the editor, then restart it while holding down Ctrl+alt+shift. Keep those keys down till you see a window asking if you want to delete the settings file. You do.

  • Help! PS won't open any files!

    Well i did a system restore and now PS won't open any file, it was working FINE before i did the system restore, I have flash and dreamweaver also installed and they're working fine!
    I open PS everythings fine, but when i try to open ANY file i get this error
    - adobe photoshop cs3 extended photoshop.exe - fatal application exit
    the specified module could not be found C:\program files\common files\adobe\adobe version cue cs3\client\3.10\versioncueui.dll
    Then when i clicked "Ok" got this error
    the instruction at "0x5ad71531" refrenced at memory at "0x00000014". The memory could not be read.
    I don't know what to do anymore, i've reeinstalled it again probably 15 times by now and it still doesn't work.
    I did something i found on google and i deleted this folder C:\program files\common files\adobe\adobe version cue cs3\
    But it still doesn't works!
    I really need help! I've had this problem for about a week and haven't found yet a solution!
    Please help!

    Um its set to Microsoft XPS Document writer....
    abd Ed... I did try stopping it but there is nothing running
    The setup process is called Setup.exe, well there is nothing running with that name but it says it is... when its not...

  • Books from Library won't open any longer

    I can't open any acsm files from the libary any longer. My Digital Editions has been working for over a year and now it won't open any files. I've tried changing my password, uninstalling and reinstalling Digital Editions Nothing works. Opening an ascm file does nothing. No error, no book nothing.
    please help!!!!!
    Thanks

    Thanks.
    Stacey E. Drayer, Chapter Executive Director
    Central Virginia Chapter - CAI
    P.O. Box 5118
    Midlothian, VA  23112
    Description: rgbCEN VIRGINIA_CLR

Maybe you are looking for

  • Error Message with Ipod Nano Updater

    When I plug in the Nano and go to the updater, it says there is a "Ipod Manager Internal Error" How do I fix this?

  • MM Purchase Order IDOC NEU output type configuration

    Hi All, after creation of Purchase Order in ME21N in ECC 6.0 server, i want an IDOC for Purchase order to be created........... i saw there is a standard output type NEU and it has EDI and Distribution Model as medium.......... when i went to ME21N a

  • Write data to BI with staging bapi

    Hi everyone, I have to deliver data from a Non SAP source system via RFC to BI. I'd like to use staging BAPI BAPI_ISOURCE_TD_T_SEND. There are several Import Parameters in the Function Module but no Fieldname for the Infoprovider i want to load. I do

  • EKPO-REPOS -Invoice Receipt indicator in Purchase Order

    Dear  Experts, Do you know if it is possible for particular PO type to have the settings, that for all its items the indicator EKPO-REPOS will be always not marked (no invoice receipt expected). If it is possible where can I do this settings?? Regard

  • Website default folder requires system password for any change

    So i turned on my OSX Server's websites section and seems to work fine. The next step of course would be to drop in a folder of one of my old projects, but the server requires my password on ever new folder I create or copy to the directory. How do I