BB Z10 - Call Log not functional anymore

I no longer have a list of dialed, received or missed calls on my BB Z10. No matter what I try, the call log/list will simply not come back,. Did any one experience this problem?

This might be a solution
Overview
When making a phone call from the BlackBerry smartphone, the call log does not show that you have made the call. Also any new incoming calls are not logged and previous calls are unable to be deleted.
Back to top
Cause
The Phone Call Logs database is corrupted.
Back to top
Resolution
To repair the Phone Call Logs database, please complete the following steps:
Note: All previous phone call logs will be deleted from the BlackBerry smartphone. It is recommended that you perform a backup of your BlackBerry smartphone before continuing. Please see KB18556.
Open BlackBerry Desktop Manager on your computer.
Make sure the BlackBerry smartphone is connected to the computer.
Click on Backup and Restore.
Click on the Advanced button.
On the right hand side under Device Databases select Phone Call Logs.
Click the Clear button.

Similar Messages

Call Log not functioning properly

I recently updated my phone software to 210.21.006 and my hardware is Nokia E71-1.
Have observed problems with the call log after that. Behaves erratically like not recording any calls (missed, dialled or received) inspite of 20 calls per category not being filled.
Very disturbing when I can see the missed call notification on the home screen but not able to see the callers.
Please help

My skype call forwarding doesn't work for last couple weeks too.
It doesn't forward calls when I'm online nor offline.

Rpt-files do not function anymore after deploying to a different database

first: I use CR. 10.2.3600.0 and Asp.NET with Visual Studio 2005
I developed my reports against a Develepment-Database and everything worked fine.
Then, I published my Website with the reports.
Also I made a backup of my Develepment-Database to become the Productive-Database.
All pages of my website function well (database-queries etc.), but when I try to call one of my reports a queerish error message occurs:
"This field name is not known. Error in File C:\WINDOWS\TEMP\...\{...}.rpt: Error in formula. '{xyz.ds_id} = {?@ds_id} and '."
I mean, the database is the "same" as before?!?
(BTW: the logon to the database is set at runtime and is ok.)
Why do the reports not function anymore?
The only workaround I found is to open the report in Visual Studio 2005 again and select "Crystal Reports/Databases/Check Database" against the Productive-Database.
After that the report works! BUT THIS COULD NOT BE THE SOLUTION, this means that I cannot publish my website to a different database on a customers network!!!

I tried this:
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
        Dim myTables As Tables = myReportDocument.Database.Tables
        ' Get Location of Database from web.config
        Dim Location As String = String.Empty
        Try
            For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
                Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
                myTableLogonInfo.ConnectionInfo = myConnectionInfo
                myTable.Location = myConnectionInfo.DatabaseName & ".dbo." & myTable.Location.Substring(myTable.Location.LastIndexOf(".") + 1)
                myTable.ApplyLogOnInfo(myTableLogonInfo)
            Next
        Catch ex As Exception
            Me.LabelError.Text = "(SetDBLogonForReport) " + ex.Message
        End Try
    End Sub
and get the error:
ex.Message     "Fehler beim Laden der Datenbankinformationen.
Details: Die Datenbank-DLL 'crdb_query.dll' konnte nicht geladen werden.
Fehler in der Datei C:\DOKUME~1\MSCHAE~1\LOKALE~1\Temp\RzpReport {748C95B6-70EC-45B9-953D-64DA215BD9DC}.rpt:
Fehler beim Laden der Datenbankinformationen"
which means in english:
ex.Message     "Error while loading database information.
Details: the databse-dll 'crdb_query.dll' could not be loaded.
Error in file C:\DOKUME~1\MSCHAE~1\LOKALE~1\Temp\RzpReport {748C95B6-70EC-45B9-953D-64DA215BD9DC}.rpt:
Error while loading database information"
I debugged the code and recognized that the error appears while setting the .Location property...?!?
My DatabaseName is "Rezepturverwaltung".
Example 1 with a command:
Befor setting the Location of mytable the value of the prpperty is e.g. "command".
After setting the value like in code above the value changes to "Rezepturverwaltung.dbo.command"
Example 2 with a stored procedure:
Befor setting the Location of mytable the value of the prpperty is e.g. "sp_GetData".
After setting the value like in code above the value changes to "Rezepturverwaltung.dbo.sp_GetData"
What`s going wrong furthermore???
Edited by: Markus Schfer on Aug 31, 2009 9:56 AM

Is it possible to get a refund for a game that is not functioning anymore?

Hi,
I recently bought a few bonus packs for a game called Valor that is not functioning since this Monday. I tried to contact their support but the only response I received so far was a macro message that in short explains that their servers are offline and they work on the issue. Three days later their status update still gives no ETA when eventually the service will be restored and I'm getting afraid that while waiting for them to fix the issue I might loose my legal right of refund. How can I proceed in that case?
Regards,
Martin

There's no defined time frame for asking for a refund since the iTunes Store has no refund policy; the official statement is that all sales are final. Any request for a refund is on a case-by-case basis and granted as an exception to policy, not a guarantee. I'd suggest waiting a couple more days and see if the problems are corrected by the developer. If not, then go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. It's possible that they will make an exception for you and grant a refund.
Regards.

Call log not saving call duration after 5800 v30 u...

Hey all,
Before updating my 5800 to v30, I remember that in the call log I could get details about any particular stored call, and it would show me how long the call was. But after the update, this is no longer there! Am I going crazy, and that ability was *never* there (and I just imagined it), or has this really been taken away with v30? Or is there a setting that I'm just missing somewhere.?
Note that I'm not talking about showing call durations DURING a call ... that's still available. I'm just talking about storing a call's duration in its call log entry.
Thanks,
Ravi

Hehe oh right, now I remember. It's in the second tab (i guess it's the detailed log tab) in the call log app. I'll just tell myself to do a search before posting. Google is your friend, Ravi!
Ravi

Call log nof functioning

HI I have a 5900. recently tried erasing a no from my last dialed no list. The no did not delete and now I cant see new nos after people have called me. only mssed calls can be seen. how do I reset this problem. somebody suggested type alt + lglg clears old logs but did not help with this resetting call log. pls help
thanks
Ashley

http://supportforums.blackberry.com/t5/BlackBerry-Classic-Insider-Event/bd-p/InsiderEvent-Classic
Today and tomorrow you can ask support questions on the Classic direct to the Classic program managers.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Any way of going back to io7 from io8, nothing works anymore. £500 plus worth of music apps not functioning anymore, is it really worth investing any more time or money into this product? what a joke it is.

Is there any way of going back to io7 from io8?
Nothing works anymore. £500 plus worth of music apps and hardware not functioning, Apps that I have paid for disappearing from the store after a reset. is it really worth investing any more time or money into this product? what a joke it is becoming. This is worse than windows vista.
Can anyone from Apple help me with this? thought not. You don't allow reverting back to earlier io versions for some strange reason. Have you forgot that we are the customer?

Sorry, Apple does not support downgrading.
As to apps disappearing, it's not uncommon for apps to be removed from the app store. I have a couple of games that I play that are no longer available.
Did you install 8 'over the air'? If so, research into doing a restore. Use a computer to back up your device and then reinstall iOS8 via a computer, and then restore your data from the backup. Sometimes a clean install clears away glitches caused by over the air installs.
If you just wish to express your frustration to apple, on the lower right corner of this page is a 'contact us' link. Send them feedback and let them know.

Bluetooth call log not synced

Hi, I have an Experia Z and a Bluetooth Radio (Pioneer AVH-X3500DAB) and while Bluetooth works well for receiving and making calls they do not show in the call log on the radio. Using a different phone there is no problem, so it must be the phone somehow, any ideas appreciated, Thanks, Martin.

Your BT device probably use some Bluetooth profile to gain the call log information which the Xperia Z doesn't support. Perhaps you can check the with the manufacturer of your BT device and then compare if the profile they use for this is supported by the phone.
All supported BT profiles are listed in the phone white paper.
http://www-support-downloads.sonymobile.com/c6603/whitepaper_EN_c6603_xperia_z.pdf (LTE v.)
http://www-support-downloads.sonymobile.com/c6602/whitepaper_EN_c6602_xperia_z.pdf (HSPA v.)
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My audio and cam is not functioning anymore.my laptop model is Satellite A200-130.what shall i do?

im having a problem with my laptop.the audio and cam is not functioning.i dont know why/
please help me what to do.do you think program files about these were deleted?

Probably best to post in the Toshiba Support Forums Europe.
-Jerry

Nobody answers me while I am asking your support: Why does my PSE 8 Serial Number not function anymore???

I own a PSE 8 with serial number there is no disc, I got it by download.
Since I tried PSE 13, and finally bought it, the old PSE 8 is not there anymore:
PSE 13 after 30 days quit and destroyed alll my PSE13 and 8 relations.
Now I have my new PSE 13 working on my labtop, but the old PSE 8 on my
office computer is out of order and there is no way to get PSE 8 from the down
loadcenter or elswhere. At the downloadcenter of Adobe it is said, that
PSE 8 for Mac ist not available. My Serialnumber is so worthless and the old PSE 8
has never been disconected. What a problem and ****.
PSE support dosnt`answer
Has somebody of you a idea, how to handle the problem?
The problem is, that Adobe sells more new stuff by this policy ...

Dear Jon
To see my history with Adobe was good for me, because I did`t know, that you have good order in your stuff
but since my old number doesn`t begin with 1057, I placed this number in front of my orther for PSE8. but it did not
work. In my account there is no number for PSE8 just the one for PSE13, since I had an other email adress at
these times I bought PSE8. The code for the old account number I dont know anymore... But I go to check wether
I find my old Serialnumber at home, maybe I wrote it wrong?
but tell me. Why should Adobe allow a second machine to work, my PSE8 was never deinstalled by me
Should I give my Serialnumber and you try to find it???

HP Simple Pass - does not function anymore

My Hp Simplepass software was working perfectly on my HP envy laptop. I used to have windows 8.1 but then tried to remove my antivirus program (Norton) from my lapto so that I could install a new antivirus software. Since I could not clear my laptop from the norton antivirus program, I decided to reinstall the op sys and now I have Windows 8 on my laptop. Now the HP Simplepass program prompts me to login with my windows software each time I reach any site that requires a password.
Could the reason my HP SimplePass is not working anymore be because I am now running windows 8? I also checks my biometric device settings and saw that there was a problem with this directory but I can't fix it. The program just wants me to manually type my main windows password each time I try to go to a site that needs a password.
I read other users who had the same problem and they tried to reinstall the program but it made no difference. Any help would be appreciated.

Hi,
Have you tried uninstalling and re-installing the Validity Sensor Fingerprint Driver from device manager?
If not try that.
1.) Press the Windows button + Q and then type Device Manager in the search box and hit enter to open it.
2.) In Device Manager, Click on > next to Biometric Sensor to expand it.
3.) Right Click on Validity Sensor driver and then click on Uninstall and follow the on-screen instruction and restart the Noteboom.
4.) Press the Windows button + Q and then type Recovery Manager in the search box and hit enter to open it.
5.) In Recovery Manager, click on Hardware driver installation option.
6.) Select Validity Sensor driver from the list and install it and restart the Notebook and check.
If this does not resolve the issue then try to perform System Restore, to set the Notebook to earlier date and time when it was working fine.
cehck the below link for the instructions to perform System Restore:
Using Microsoft System Restore (Windows 8)
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves/answers your problem****
****I am an HP Employee but I speak for myself and not for HP or Others.****
I work for HP.

Call Logs Not Tracking Calls.

I've made calls but none appear in my call log. I get a message: "No details are available for {phone #] Any ideas how to resolve? Thanks.

Please check your Private Message Inbox.; It should look like this -

Hotsync Log not HTML anymore...

Hi...I'm going on a trip so I put my Palm Desktop (from a desktop machine) onto my Dell laptop. Well, it took me a long time to actually get Hotsync to work, but I finally did, yay! But, now my logs appear in this little gray dialog box which is much harder to read than when it came up in a browser. Does anyone know how I can change this? Thanks...
Sharon
Post relates to: Tungsten E2

Thank you for that. The reason I ask is the Palm Desktop 4.1.4E lost only one function. And that is the media sync. But with you having 4.1.4 installed and having media. So installing that version should be fine. When you do you should get the log file as a webpage then. Oh and when you install it don't uninstall your other Palm Desktop. And if you know how to export your data do so as well. If not message back and I can walk you though how to back up your data.
Post relates to: Palm Z22
Message Edited by thepoeta15 on 09-05-2008 02:31 PM

Caller ID not working anymore

Hello,
I use to have my caller ID pop up on my Television, but it no longer shows up. I checked the settings one all of my TV sets and it shows that Caller ID is available and enabled. I'm not sure what else to do or what else to check. Any help is greatly needed. I love my Caller ID Please help!

pmirsoian wrote:
Hello,
I use to have my caller ID pop up on my Television, but it no longer shows up. I checked the settings one all of my TV sets and it shows that Caller ID is available and enabled. I'm not sure what else to do or what else to check. Any help is greatly needed. I love my Caller ID Please help!
You might have to reset it.
So the steps you want to do are as follows
Disable (menu > settings > caller id > display alerts = disable)
Reboot (menu > customer support > in home agent > reboot STB set top box)
Enable (menu > settings > caller id > display alerts = enable)
Every once in a while the caller id kinda hiccups and you have to do the above steps.
If they don't work then open a live chat, or call verizon at 800 VERIZON

IPhone 4 vibration, wifi, and calling will not function correctly?

I have had my iPhone 4 for 6 months now, and I have dropped it a couple of times, but a few days after I dropped it nothing happened. My first problem started in May when I noticed that my phone could not reach the wifi at home or other places quickly as it normally could and when I would go into other rooms I would lose the connection quickly.This made me have to use my 3g more often and I only have a limit of 300MB, I normally do not use it, because of the wifi i have around,but it is getting harder. 2-3 days ago I called the DATA (*3282#) in my phone and got 64.89 out of 300MB. I later used my 3G for awhile, so a day later i called DATA and the same number (64.89 out of 300MB) comes on again. I knew this was a mistake so I called it again and the same number shows up. I KNOW FOR SURE I USED MY 3G, so I dont know why this keeps popping up. Everything else channged (texting and calling) On top of that my vibration started to not work in early June and it's difficult for me to know when someone has texted or called. I have tried going into settings and choosing a different type of vibration, but it does not vibrate overall and yes it is turned on. My version right now is 6.1. Will upgrading help? Everything else works fine, but is there a way I can fix this or do I have to go the Apple Store? I'm also in AT&T.

For the data usage,
I have AT&T as well and I found that the Data usage only updates about once a day even though texting updated instantly.
As for the vibration,
The vibration motor thing may be broken.
But I am not sure.

BB Z10 - Call Log not functional anymore

Similar Messages

Maybe you are looking for