BB Z10 Model STL100-1 Won't Start Up Running OS 10.2.1

I purchased this phone in May through Amazon unlocked and I use it on the T-Mobile Network.
It is within the first year of the phone and the video hardware seens to have went out on the phone.
The phone kept freezing and then it would go black screen and fade and then complete turn off.
At first I would pull out the battery and it would not start right away it would start then go black screen part way through the start up screen. But after a few times of pulling out the batter it would go through and back to the OS. This started to happen more and more.
I'm running the latest BB os 10.2 updated through the phone and bb link.
The screen started freezing up and then going black.
Now my phone sometimes will start to the BB os start up screen but it always goes to a black screen and does not go to the full os.
It is still under the 1 year manufacturer warranty. Can you help me? My phone screen has went blank.
I have reloaded the software through the BB Link Desktop software via USB cable. And still the phone won't load past the first part of the load screen then it fades to black.
I have let it charge for two or more hours, pulled out the battery and waited two minutes or more and then put it back in as well.
Nothings is working. The phone is now a brick.
It started to happen slowly. It seems to be a hardware issue or something to do with the screen.
It hasn't been in water or dropped or anything. It just started acting up and now it won't even turn on.
I have tried everything that the BB.com site said to do and I still can't get it past the start up screen. It begins, then fades slowly to black. Please help.
It is a BB Z10 Model STL100-1 running OS 10.2.1 loaded through BB Link and device updates.
Please help.
Blackberrry logo comes up then fades and turns off completely or just stays hung on the logo screen.
Its been like this for two days now.

1. If it is still within warranty as you mention, follow up on the warranty with your seller or Tmobile.
2. You can try using an autoloader file to awaken the device... Upgrading OS10 devices using Autoloader
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Premiere will freeze at loading screen and won't start. Running win7 64bit

Hi, I'm having a bit of a problem here.
I just recently upgraded to CC because I had this issue with the CS 6 versions.
The problem:
Premiere Pro, inDesign, Illustrator and After Effects won't start. They will all get stuck at the loading screen. The weird thing is that Photoshop and Lightroom work without any problems.
I've tried restarting, completely wiping all Adobe Software with the cleaner tool and reinstalling. I've contacted support via chat and the couldn't find a fix. I then looked for weird processes in the task manager and found out that after a while (2-5 minutes) of letting Premiere show a blank loading screen (no "Loading ..." / "Initialising..." etc), suddenly "Loading ImporterPhotoshopProxy.prm" will appear and a process called "PhotoshopServer.exe" will show up in the task manager. If I kill this process then Premiere will start.
Has anyone had similar problems? Can't find anything on Google.
Thanks in advance.

wootey wrote:
Hi, I'm having a bit of a problem here.
I just recently upgraded to CC because I had this issue with the CS 6 versions.
If you had problems with CS6 upgrading to CC or CC2014 will not solve your problems. You must have basic hardware/software problems that only will get worse going to more complex versions. Do you have any third party codec pack installed? You must have rogue processes running. When you start up your system how many processes are running, look at your task manager?
What is your hardware configuration?

Battery of Z10 Model STL100-2 gets heat

Hi all,
I purchased a simfree BBZ10 STL100-2 from UK. After using for a while (especially viewing photos, watching movies for about 10-15 mins), it gets hot in the back. Is it a normal norm?
Please advise.
Long

i have updated the lates vesion 10.0.10.648.. when ever i browze or using internet, viewing pictures it's getting heat... specially when i play game within 2-3 minitues it's getting heat... it's so hot like hot plate...how should i contral this or minimise this...
hope give solutions for it...
and also battery life is short... within a half day the battery usage % is comeing from 100% to 35%. i made all necessary action towards to use the battery effectively... but still not..i have referred the folloing link
http://www.blackberryos.com/blackberry-10-tips-tricks-how/35852-top-ten-ways-extend-battery-life-you...
presently i have sync with linkedin and facebook... other than all other application has shutdown...
hope i receive better response from the bb team...
i'm not the new user... last 4 years i'm using bb from 9000, 9700, 9900 & now bbz10
looking forward reply

Help - Macbook Pro won't start after running update

I just checked the FAQs here and ran several searches and have not found an answer to my problem. I sure hope someone here can help.
Today I installed the big batch of updates Apple released recently (I think it was on July 31) on my 2.4 GHz Macbook Pro. When I turned it on, I was told there was one last update that required me to turn off the machine and then hold down the power button.
I did, and the machine started to come on, but I guess I held the button down a little too long. Now the machine won't turn on. Everytime I press the button, I hear the same sound I always get when I turn on my machine, except that now the sound just goes on and on and on, and the MBP never actually boots up.
I wish I could remember the exact name of the update. I think it might be the EFI Firmware Update 1.2 that's described at http://www.apple.com/support/downloads/macbookproefifirmwareupdate12.html. That scares me because the words "Important: Do not interrupt the update" suggest things can go badly if the update doesn't go right the first time.
Any advice as to what I should do?

That sounds like an interrupted firmware update. And Macs with interrupted firmware updates are very unhappy Macs!
You will need to restore your firmware to it's original state, then reapply the update. For this, you'll need to create a Firmware Restoration CD.
See this page:
http://docs.info.apple.com/article.html?artnum=303469
Here's one of the more important sections of the page: +"If your computer is already in this state, you'll need to download the software and create the CD on another Macintosh computer, or you can take your computer to an Apple Store or Apple Authorized Service Provider to restore your firmware. This CD can be created on both PowerPC- and Intel-based Macintosh computers."+
You might be better off just taking it in to an Apple Store.
Ps. When you get a chance, you might want to update OS information in your forum settings - I'm pretty sure you're not running 10.3.8 Panther on your MBP!

PowerMac G4 MDD sometimes won't start, fans run full speed

I was recently given a PowerMac G4 MDD but am having a problem with it.
Sometimes it will start and boot OK but other times it will do nothing, no chime, nothing on the screen and after a few seconds the fans (or a fan) appears to start running at full speed.
Turning it off and back on usually makes it work.
I have checked the PRAM battery which seems good at 2.67v, and then I tried resetting the PMU as suggested on the forum somewhere but that didn't help either.
Normally being a Windows\PC person I am not really sure what to do next. I get the impression it's a hardware problem but not sure what.
Hopefully someone else will recognise these symptoms and can help me!

Ha, you just made me check the battery again - I must have made an error because the battery is 3.67v, NOT 2.67v
Unfortunately, I guess that means the battery is not the problem?
I wonder if I have a PSU problem? After what Hank said, I read here: http://en.wikipedia.org/wiki/Power_Mac_G4 that "A very common issue in the MDD models was a failing PSU."

Help please! Imac won't start and running out of ideas

Help! My imac G4 Flat Panel running tiger won't boot or go beyond the grey screen, here's what happened,
I went away on holiday for ten days and unplugged it, on return it worked fine for the first few goes however after leaving it with alot of photos open for a couple of hours I returned and the screen had gone funny, showed the app window on top but not properly and grey on the bottom two thirds, I could just about move the mouse which was ghosting and it sort of worked but not properly, I switched it off on the power switch and rebooted and it was okay for a few more sessions until getting stuck with the mail app open, I tried to force quit but couldn't and eventually turned it off on the switch, after which it won't boot or go beyond the grey screen every time I switch it on, I've tried all the following with no joy:
-unplugged all peripherals
-taken out airport card and extra ram I'd fitted myself about six months ago
- done command, option, p and r on switching on, also command x and command option.
- tried to boot from the original os x cd which came with it - this gives me a broken mac symbol and multicoloured spinning ball
- boot from os9 disk which came with it this gives me a flashing question mark sometimes but most times just the grey screen.
- boot from apple hardware test diagnostic cd which came with it, just says loading and hangs
- boot from tiger dvd - shows the apple logo then a sign similar to no entry sign and spinning thing underneath.
I've tried rebooting about 100 times now, as it once did a similar thing about eight months ago but eventually booted okay and then I ran check permissions etc. and never had a problem until now.
I've put everything I can think of in in case any of it is important, apologies if there's too much extra info here but if anyone has any ideas I'd be very grateful, am a bit stuck without it, luckily I've backed up most of my stuff but there's some things I haven't. please help! thanks

Sorry to hear about your problem and I wish I had happy news. Sounds like what I am going through. Just spent over 200$ getting the Tiger upgrade installed at a Mac repair place because I wanted it done right, and had the RAM upgraded. After two weeks of bliss I get a gray screen with a spinning gear. The CD drawer wont open, nothing. Take it back to the shop and I find my hard drive is done. This is the SECOND hard drive. My G-4 came with a 40 gig HD, the one that they replaced it with 2 years ago was an 80 gig. I hope thats not whats going on with yours but it sure sounds like it. I beginning to wonder if there isn't a design issue going on here. I am a casual computer user but my son is on it for hours at a time and I'm wondering about heat buildup and the hard drive. Gonna ask that question when I pick it up, good luck with yours.
Pat

BB z10 won't start up after updating to bb link

I accidentally dropped my phone on the floor, and it won't start up.
here are the following steps that i already did:
1. I already tried to update it on the bb link, after successfully updating i remove the usb cable, however it didn't start up. everytime i try to do a hard reset it automatically turns off, even when im seeing the blackberry logo on the screen. it goes off again.
2. i tried also to charge it first and then the blackberry name appears on the screen it will also automatically turns off and after that it will charge only and then again the blackberry name appears on the screen same thing happen again.
3. I tried to uninstall the bb link to my computer and install again the bb link then update it again, after the successful update. still no changes happen
4. I also tried to update the bb z10 os, in a hard way through internet explorer, nothing change still won't start up.
There's one thing that i've noticed everytime I plug the usb cable on my phone, through the computer and access the bb link, it will connect and then it will disconnect it goes on and on, as i seen on the screen. I updated the usb cable plugging in,thinking that can fix the problem but still nothing change.
I know that my bb z10 works fine up to now, because there is an instant that the bb logo appears on the screen completed loading and i can navigate it for a while like changing the language and connecting to a wifi, and the logo of my sim card appears on the screen, however it will take few seconds only, and then it will turn again to the same situation that occurs on my phone.
Please help me find a good solution regarding on my phone problem.

Since this occurred right after dropping your device it's probably damaged internally. Not much we can do here for that.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

My iMac 2009 model won't start.

My iMac 2009 model won't start. Was working fine the night before, tried to on it but still no response. I also tried unplugging and plugging into the main switch plus other power points several times , doesn't work either. Please assist as most of work and important information are stored in it. Thank you

When you press the power button, what happens? When you say "no response," does that mean it does not power on at all?
You unplugged from power and plugged it back, but I would try it again following this procedure for resetting SMC exactly
http://support.apple.com/kb/ht3964
When you connect it back, if you are using a "power strip," try connecting it directly to a wall outlet. Be sure to check the connection of the power cord at the iMac end (disconnect and reconnect there too). You should disconnect ALL cables from the iMac and try to start it up with only the power cord connected.

Z10 dead won't start up

My z10 won't start up when u plug into charger red light comes on for 20 sec and goes out. if i hold down power button it blinks twice after 10 sec and then goes out at 20 sec. my computer will not reconize it at all. have pulled battery and put in charged it for days. nothing works is the some one out there that can help?

Hi and Welcome to the Community!
I cannot tell, from your post, if you have exactly followed this. Therefore, please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Z10 won't start

I had problems with my BBM in my Z10 so I had to do a security wipe to get it working again after I did the security wipe every time I start my phone it tells me to connect it to my PC and I did but still won't start I had tried the blackberry link and the internet explorer thing but still it won't work
any HELP plzzz ???

HELP!!!!

SAP won't start after recabeling sap system

Hi, 
 
I have recently recabled my sap system (from wireless to wired) and now my sap instance won't start anymore. The weird thing is that nothing major was changed. When i read the logs from the work directory it seems it cannot load dbsdbslib.dll. I have updated to the latest version of the kernel and maxdb (kernel=7.00 patch 221, maxdb=7.6.06.07) and i made very sure i got the right kernel (NT AMD64). I also checked the environment settings for the <sid>adm user. The weird part is that it seems SAP cannot connect to the database, but the databse starts just fine and r3trans -d also returns no errors. Does anyone have an idea what could be wrong? 
 
Kind regards, 
Bas 
 
 
trc file: "dev_disp", trc level: 2, release: "700" 
 
 
command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE 
command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap 
 
ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll") 
Error 126 = "The specified module could not be found." [dlnt.c 255] 
sysno 00 
sid IDE 
systemid 562 (PC with Windows NT) 
relno 7000 
patchlevel 0 
patchno 221 
intno 20050900 
make: multithreaded, Unicode, 64 bit, optimized 
pid 3252 
 
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC) 
length of sys_adm_ext is 576 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3252) [dpxxdisp.c 1287] 
ShmProtect( 5, 3 ) 
SigIInit: ok (whoami=1) 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 11 installed (SigISegv) 
Pipe created:
.\pipe\SAP3252 
SigIInit: Create Message Thread 
SigIRegisterExitRoutine: exithandler installed (DpHalt) 
SigIRegisterTerminateRoutine: terminatehandler installed (DpHalt) 
 shared lib "dw_xml.dll" version 221 successfully loaded 
 shared lib "dw_xtc.dll" version 221 successfully loaded 
 shared lib "dw_stl.dll" version 221 successfully loaded 
 shared lib "dw_gui.dll" version 221 successfully loaded 
 shared lib "dw_mdm.dll" version 221 successfully loaded 
dp_loc_queue_max_blk: 40000 
mshost: >sap< 
DpSetCancelStrat: set timeout 0 at level 0 
DpSetCancelStrat: set timeout 5 at level 1 
DpSetCancelStrat: set timeout -1 at level 2 
DpSetCancelStrat: set timeout -1 at level 3 
rdisp/softcancel_sequence : -> 0,5,-1 
softcancel_sequence: >0,5,-1< 
use internal message server connection to port 3900 
msserv: >3900< 
dp_bufreftime: 120 sec 
dp_btctime: 60 sec 
dp_autoabaptime: 300 sec 
dp_autothtime: 60 sec 
dp_autojavatime: 300 sec 
dp_vm_alarm_time: 100 msec 
dp_calldelayed_time: 60 sec 
dp_startup_time: 20 
dp_noptime: 0 sec 
dp_keepalive: 1200 sec 
dp_keepalive_timeout: 60 sec 
dp_ms_keepalive: 60 sec 
dp_ms_keepalive_timeout: 300 sec 
switch off dp-keep-alive for old temus 
dp_gui_auto_logout: 0 sec 
dp_spoolalrm: 60 sec 
dp_softcancel_timeout: 5 sec 
rdisp/wp_restart_interval : 300 sec 
DpISetTrcLog: trc logging active, max size = 20971520 bytes 
dp_rfc_check_active: 1 
dp_rfc_check_all_rfcs: 0 
dp_http_check: 1 
check_master_slave: 0 
NiHsLGetServNo: got service name 'sapdp00' from operating system 
NiIGetServNo: servicename 'sapdp00' = port 0C.80/3200 
NiHsLGetServNo: got service name 'sapgw00' from operating system 
NiIGetServNo: servicename 'sapgw00' = port 0C.E4/3300 
NiIMyHostName: hostname = 'sap' 
NiHsLGetNodeAddr: got hostname 'sap' from operating system 
NiIGetNodeAddr: hostname 'sap' = addr 192.168.2.250 
NiHsLGetHostName: found address 192.168.2.250 in cache 
NiIGetHostName: addr 192.168.2.250 = hostname 'sap' (fq) 
Mon Oct 26 16:14:29 2009 
NiHsLGetNodeAddr: hostname 'www.doesnotexist0190.qqq.nxst' not found by operating system 
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0190.qqq.nxst) took 12 seconds 
Mon Oct 26 16:14:45 2009 
NiHsLGetHostName: address 1.0.0.1 not found by operating system 
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds 
NiHsLGetServNo: got service name 'http' from operating system 
NiIGetServNo: servicename 'http' = port 00.50/0080 
NiHsLGetServName: port 1F.90/8080 not found by operating system 
NiHsLGetServName: port FC.2B/64555 not found by operating system 
NiHsLGetServNo: service name 'sapdp9988' not found by operating system 
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521] 
SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff) 
SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff) 
SigIRegisterRoutine: alarm handler installed (DpSigAlrm) 
SigIRegisterRoutine: handler for signal 2 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 15 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit) 
MtxInit: 30000 0 0 
DpInitMtx: MtxInit o.k. 
PPID environment not found 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp) 
 
 
trc file: "dev_w0", trc level: 2, release: "700" 
 
* 
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, MJ
M
M command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE
M command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap
M command line arg 2: wp_id=0
M
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll")
Error 126 = "The specified module could not be found." [dlnt.c 255]
B *** ERROR => Couldn't load library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll'
[dbcon.c 4905]
M sysno 00
M sid IDE
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 221
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4000
M
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4000) [dpxxdisp.c 1349]
M Mon Oct 26 16:14:47 2009
M SigIInit: ok (whoami=2)
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 11 installed (SigISegv)
M Pipe created:
.\pipe\SAP4000
M SigIInit: Create Message Thread
M SigIRegisterExitRoutine: exithandler installed (wp_halt)
M SigIRegisterTerminateRoutine: terminatehandler installed (wp_halt)
M SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff)
M SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff)
M SigIRegisterRoutine: alarm handler installed (DpSigAlrm)
M SigIRegisterRoutine: handler for signal 2 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 15 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit)
I MtxInit: 30000 0 0
M DpInitMtx: MtxInit o.k.
M WaitParent Thread 3252 start
M WaitParent Thread 3252 created
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp)
 
 
trc file: "trans.log" 
 
 
4 ETW000 r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 21.10.2009 - 15:06:04
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 21 15:06:06 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbsdbslib.dll"), hdl 0, addr 0000000188C00000
4 ETW000 7580 0.007580
4 ETW000 [dev trc ,00000] using "D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll" 16 0.007596
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 19 0.007615
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll 38 0.007653
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.211) 307 0.007960
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll 26 0.007986
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll 24 0.008010
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 46 0.008056
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000) 21 0.008077
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008092
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000003B4F920) 20 0.008112
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008127
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.008144
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.008194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000001A01768) 31 0.008225
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.008242
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 13 0.008255
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 16 0.008271
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO

Edited by: B. v. d. Lienden on Oct 26, 2009 5:18 PM

<div class=Section1>
Natalia,
 
To answer your questions:
1. Did you create the SAP ticket, where this problem is
reported?
I didn't report it to SAP because it is just an IDES test
system. I can easily do a reinstall, but i would like to know the cause and
solution to this problem.
 
2. Do you have dbsdbslib.dll at this location? What version?
Yes, i have the dbsdbslib.dll at location
D:\usr\sap\IDE\DVEBMGS00\exe and also D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
Version is 7000.221.16.41497 (kernel 7.00 SP 221)
 
your requested output:
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update level u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A00
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\ideadm\Application Data
CLIENTNAME=BSF02
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=SAP
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=ada
DIR_LIBRARY=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
DIR_PROFILE=D:\usr\sap\IDE\SYS\profile
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\ideadm
JAVA_HOME=C:\j2sdk1.4.2_21-x64
LOGONSERVER=
SAP
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\j2sdk1.4.2_21-x64\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\Intel\DMIX;D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 13,
GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0d
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
SAPEXE=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
SAPLOCALHOST=sap
SAPSYSTEMNAME=IDE
SESSIONNAME=RDP-Tcp#47
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\2
TMP=C:\WINDOWS\TEMP\2
USERDOMAIN=SAP
USERNAME=ideadm
USERPROFILE=C:\Documents and Settings\ideadm
windir=C:\WINDOWS
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update levelu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
 
 
</div>

All of a sudden Photoshop won't start [on a Macbook Air]

Dear all,
I'm on a MacBook Air with OS X 10.10.2, and I use Photoshop about once a month, but now I really need it, and it won't start:
- Immediately after I click on the Photoshop icon I get "Adobe Photoshop CS5.1 cannot be opened because of a problem." And when I click on the "Report..." button I get a very technical message (see below).
- I've used Photoshop on this machine for about a year with no problem, but recently I had a problem and needed to restore from my TimeMachine backup.
- I don't know if the problem occurred immediately after the restore or not.
- I've read innumerable threads on various forums, but nothing describes my problem exactly. I suspect a problem with my paths and permissions (since I read a report that restoring from a TimeMachine causes such problems occasionally), but I don't know which path is corrupted/missing/unreadable.
- I've tried creating a new admin account and starting Photoshop from there. It didn't work.
- I don't mind reinstalling, but I don't have an installer image. I started with Photoshop 6, then updated to CS2, CS4 and eventually CS5. I do have all the serial numbers but not all update-images.
I would appreciate any hints on how to further diagnose and some the problem.
Thanks a lot in advance!
Bojidar
And now here is my exact error message:
Process: Adobe Photoshop CS5.1 [12426]
Path: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Identifier: com.adobe.Photoshop
Version: ???
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: Adobe Photoshop CS5.1 [12426]
User ID: 501
Date/Time: 2015-05-03 21:53:39.840 +0200
OS Version: Mac OS X 10.10.1 (14B25)
Report Version: 11
Anonymous UUID: A0DC6EA7-1973-1B68-EFC7-5D60106F084D
Sleep/Wake UUID: 1FA6367C-EEB2-4F46-8773-EBB176EAEAC7
Time Awake Since Boot: 230000 seconds
Time Since Wake: 2900 seconds
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/adobe_caps.framework/Versions/A/adobe_caps
Referenced from: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Reason: image not found
Binary Images:
 0x7fff6f1c1000 - 0x7fff6f1f7837 dyld (353.2.1) <4696A982-1500-34EC-9777-1EF7A03E2659> /usr/lib/dyld
Model: MacBookAir6,2, BootROM MBA61.0099.B18, 2 processors, Intel Core i5, 1.3 GHz, 4 GB, SMC 2.13f15
Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0256F, 251 GB
USB Device: Internal Memory Card Reader
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Air, Apple Inc., 23.6

Did tou try resetting the preferences usins the Photoshop keys as your tryind to start Photoshop. Toy cab also use Windows explored or Mac finder deleteor rename you userid Photoshop preferende if you change you OS preferences to be able to see hiddeb files and folders. Do you read the link I posted?
Restore preference files to default
In this video, learn the two methods of resetting your preference files back to default: Manual preference file removal and Keyboard Shortcut method (starts at 5:05)
by Julieanne Kost
To restore preferences quickly using a keyboard short cut:
Press and hold Alt+Control+Shift (Windows) or Option+Command+Shift (Mac OS) as you start Photoshop. You are prompted to delete the current settings. The new preferences files are created the next time you start Photoshop.
Note: Using the keyboard shortcut, preference files for custom shortcuts, workspaces, and color setings will also be reset to default.

I deleted my extensions manager and now my Mac won't start up. Please Help!!

I have an IMac, 24" model, running OS X. For the past several days, little warning windows have been popping up with this annoying beep, telling me that my computer was infected with various viruses. 4, to be exact. Also, while on the internet, random pop-up windows have appeared, so I thought I did have a virus. So, to correct the matter (or attempt to), I deleted my preferences folder from the system folder, as well as the extensions manager.
Now, the computer won't start up past the white logo screen with the turning gear thingy. I've tried resetting the PRAM, and starting in safe mode, and safe mode with the progress screen, and even something there while holding the option key (that one gave me an icon of my HD, but clicking on it took me back to an endless wait on the white screen). I've tried starting from the disk that came with the computer (I held the C key) but not only doesn't the computer start from the disk, it spits the disk out. I don't understand. The computer was fine until I deleted the ext. mgr and preferences, so it can't be that the computer went bad or something.
I don't know what else to do here. I do have an extended service warranty with Best Buy, but I wanted to see if there was some way to fix this before hauling this thing off to the store. Any suggestions? I'm desperate here, because anything and everything I've tried (based on all the try-this and try-thats I found on the internet), nothing has worked.
Please help.
Thanks in advance.

Well done! You've succeeded in turning your Mac into a useless brick.
Deleting the System/Library/extensions folder and the associated manager removed most of the functionality from your OS.
And all to get rid of what sounds like the MacDefender trojan or a variant.
ref; http://support.apple.com/kb/HT4650 and http://support.apple.com/kb/HT4651
You may have a slim chance of recovering if it will still boot in Target Disc Mode; in which case you can use another Mac to install the system remotely.
And I doubt your warranty with Best Buy is going to cover user "error."
Message was edited by: noondaywitch

NVRM error, now mt MBP won't start

Over the last 2 weeks, my MBP would crash (mostly during playing games). At first, I could just restart it and after a few restart it would be fine. But yesterday it crashed again after I managed to restart it (after another crash). But now it won't start up.
At start up, I would get the grey screen with Apple logo and then after 30 seconds or so, the grey screen gets distorted and generally the graphics are all messed up (and crash). I have tried booting up from Leopard CD, but it gets to a certain part and I get the Mac crash screen where it says the Mac has crashed and I need to restart.
Before it got to this stage, I have managed to restart it and after a restart, I got a noticed saying my Mac has crash and would I like to send report to Apple. So I did (3 times) and below is the error I got.
Fri Feb 6 22:56:59 2009
panic(cpu 0 caller 0x00405DEB): "NVRM: Read Error: GPU 0, PCI 0x00000100, BAR0 0x92000000 0x3a0e2000"@/SourceCache/xnu/xnu-1228.9.59/iokit/Kernel/IOLib.cpp:724
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x39cb7548 : 0x12b4f3 (0x45b13c 0x39cb757c 0x1335e4 0x0)
0x39cb7598 : 0x405deb (0x49da40 0xda3280 0x39cb75dc 0x39cb75cc)
0x39cb75b8 : 0xb744f7 (0xda3280 0xda3280 0xd67c88 0x0)
0x39cb75f8 : 0xe2bd1a (0x4d73404 0x4d78804 0x100b80 0xbb356a)
0x39cb7638 : 0xe10feb (0x4d78804 0x100b80 0x0 0x0)
0x39cb7688 : 0xddb6ef (0x4d78804 0x4d8f804 0x39cb77b8 0x0)
0x39cb77f8 : 0xe44d16 (0x4d78804 0x4b7c004 0x0 0x1)
0x39cb7878 : 0xe1bd79 (0x4d78804 0x4bbc604 0x40 0x3e8)
0x39cb7998 : 0xcd6a00 (0x4d78804 0x4eeb804 0x39cb7a88 0x39cb7a88)
0x39cb7ab8 : 0xcd66c2 (0x4d78804 0x4ef4804 0x0 0x0)
0x39cb7b38 : 0xe14392 (0x4d78804 0x4ef4804 0x6 0x2)
0x39cb7bb8 : 0xe1517e (0x4d78804 0x4eeb804 0x1000 0x39cb7cdc)
0x39cb7d38 : 0xe46320 (0x4d78804 0x4eeb804 0x0 0x0)
0x39cb7e88 : 0xcca16f (0x4d78804 0x4bbc604 0x0 0x0)
0x39cb7ed8 : 0xb749b6 (0x4d78804 0x4bbc604 0x0 0x0)
0x39cb7f18 : 0x4224ff (0x0 0x4fb1c80 0x1 0x19eb5b)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.nvidia.nv50hal(5.3.6)@0xdb8000->0x100cfff
dependency: com.apple.NVDAResman(5.3.6)@0xb5b000
com.apple.NVDAResman(5.3.6)@0xb5b000->0xdb7fff
dependency: com.apple.iokit.IONDRVSupport(1.7.1)@0xb4d000
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x5d2000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.1)@0xaee000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
This sounds very much like this error http://support.apple.com/kb/TS2377 but in this doc, nothing was said about not being able to start up the MBP.
The thing is I really need to boot up one last time to get some files off there, is there anyway I could boot up one last time? As I said before it won't boot up from HDD, not from CD, I tried booting up from external HDD but that system is 10.4 so it didn't show up.
Would appreciate any help so I can get these files off before I take it into repair!
Thanks

I just had a whole day of kernel panics and screen flicker (video flicker - not backlight) yesterday. I had stuck and incorrectly updated windows on the screen. Soon after that the machine crashed. A few reboots later the MacBook would freeze after a few minutes of use and then finally it would only boot into the dimmed screen of death or a stuck spinning wheel (even when booting form CD!!!). Inbetween, I managed to boot it from CD, but the machine crashed during disk check and finished the check (no errors) the third time!
I followed all instructions (5 secs power button while without battery and power) did NOT help.
I disconnected battery and power supply and let the MacBook sit for a few hours. That helped and magically the machine booted as if nothing happened.
I ran the loooong hardware test. Everything fine. I ran the disk check everything fine. I am clueless.
Today I had the same crash again, but at least everything was fine after a hard reboot. It even crashed the attached iPhone, which suddenly showed the Apple icon ?!? Hard to believe!
Remark: many of the crashes did not result in a kernel panic, but just froze the computer.
Kernel Panic Backtraces:
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.4.4)@0xb6d000->0xdcbfff
dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0xb5f000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5cd000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0xac6000
com.apple.iokit.IONDRVSupport(1.7.3)@0xb5f000->0xb6cfff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5cd000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0xac6000
com.apple.iokit.IOGraphicsFamily(1.7.3)@0xac6000->0xae2fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5cd000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9J61
Kernel version:
Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
========== (Booted from CD) ===============
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0x64308000->0x64534fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0x54eb1000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x54efc000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0x55146000
com.apple.iokit.IONDRVSupport(1.5)@0x54eb1000->0x54ebefff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x54efc000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0x55146000
com.apple.iokit.IOGraphicsFamily(1.5)@0x55146000->0x55161fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x54efc000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
Message was edited by: katzlbt

Toshiba portege model A605-P200 won't POST bios unless I take out the battery and put it in again

toshiba portege model A605-P200 won't POST bios unless I take out the battery and put it in again
though, at times, it will, generally all i get is a flashing cursor NO toshiba splash screen. this seems to have started as an unsucessful windows update
i am getting driver freezing at crc.disk.exe when i safe boot when i get the machine to boot past the bios
thanks

Unfortunately, it sounds like it might require servicing.
- Peter

BB Z10 Model STL100-1 Won't Start Up Running OS 10.2.1

Similar Messages

Maybe you are looking for