BB8530 - error in displaying ringtones selected

I have seen on other BB that when you select a ringtone for a contact that the name comes up. Not on this BLACKBERRY. wHERE CAN YOU SUBMIT BUG REPORTS TO RIM?

Hello Karunakar,
the window name has to be in uppercase... change Addressbookwindow to ADDRESSBOOKWINDOW. And also make sure you have a window by name ADDRESSBOOKWINDOW.
BR, Saravanan

Similar Messages

CS6: error in displaying the selecting outline

Hi,
in Photoshop CS6 I opened about 90 (yes, ninty ) images at once and now I want to create selections image by image (and in the next step cropping to these selections, saving & closing the images automatically by using a script). But when I make a selection and move it afterwards to a new position or create a new one, the selection borders/outline look/s like this - very ugly:
Maybe because there are too much images opened? (but not the first time I use this "method" for editing several hundreds of images).
In the status bar PS shows me 12,1 GB for the images, but "only" has 10,5 GB RAM available (identical to the PS settings).
Or is this primary a problem of my graphics card which only has 512 MB RAM (in a workstation with 16 GB RAM)?
... or "just a bug" in CS6?
thanks!
mtemp

I've never seen this before, but yes, it may be a graphics card limitation.
As a test, what happens if you make a channel out of that strange broken selection? It it really as messed up as it seems to be?
The other alternative could be that since PS is being asked to use more RAM than is available, it is going to disk. This could also mean a hard drive corruption of some kind.
What happens if you only open half the images? Do the selections work properly then?

Displaying error message while entering selection screen fields

Moderator message: don't offer points
hi experts...
i generated a report.
in that report, the selection screen fields are plant and material type..
now my rqmt is like this :
if user enters any plant except '8210' in the selection screen, then a pop up should appear like.. enter 8210 plant only, and the cursor should remain in the same screen allowing user to enter correct plant.
and then same with the case of material type also..user should enter 'mcfe' material type only..
im using message classes like this:
if so_bwkey-low ne '8210' or so_bwkey-high ne '8210'.
message i000(zts).
endif.
if so_mtart-low is not initial and so_mtart-high is not initial and so_mtart-low ne 'mcfe'
or so_mtart-high ne 'mcfe'.
message i001(zts).
endif.
with this logic, when i enter plant..it is prompting
1) enter plant 8210 only..
and then when i press enter key it is again prompting
2)enter material type mcfe only..
but iam not entering material type here..
i want to get 2nd error message if and only if i enter material type..
help me regarding this issue..
<<text removed>>
thanks in advance,
harini.
Edited by: Matt on Feb 9, 2009 10:14 AM

Hi,
Use Error type message in SELECTION SCREEN EVENT.It will place the cursor in the relevant Field.
At SELECTION-SCREEN ON SO_BWKEY-Low.
if so_bwkey-low ne '8210' .
message E000(zts).
endif.
At SELECTION-SCREEN ON SO_BWKEY-HIGH.
if so_bwkey-high ne '8210'.
message E000(zts).
endif.
At SELECTION-SCREEN ON so_mtart-LOW.
if so_mtart-low is not initial and so_mtart-low ne 'mcfe' .
message E001(zts).
endif.
At SELECTION-SCREEN ON so_mtart-HIGH.
if so_mtart-high is not initial
and so_mtart-high ne 'mcfe'.
message E001(zts).
endif.
This will resolve the issue..
Regards,
Gurpreet

Error when displaying xellerate form

Hello,
I have the following error when displaying the form of any xellerate users :
ERROR,03 May 2011 10:40:56,273,[XELLERATE.APIS],Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-19'
All is working fine, just this error that is diplayed each time I want to display a user form. In my formMetadata.xml, I have the following definition for the field -19, it is the manager :
<Attribute name="-19" label="global.label.managerid" displayComponentType="LookupField" variantType="long" dataLength="50" map="Users.Manager Login">
<ValidValues lookupColumnNames="User ID,Last Name,First Name" lookupQuery="SELECT usr.usr_key,usr.usr_last_name,usr.usr_first_name,usr.usr_login FROM usr, ugp, usg WHERE ugp.ugp_name = 'PROF_MANAGER' AND ugp.ugp_key = usg.ugp_key AND usr.usr_key = usg.usr_key AND usr.usr_status = 'Active' AND usr.usr_emp_type = 'Employee'" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
</Attribute>
What is the problem with my attribute definition ?
Thanks for your help,
Kind regards,
mdadikn

Hello,
I'm new to OIM. I am a new hire to a group that had a contractor setup the whole system. I'm finding a similar issue on our system here. I've looked through the database and cannot seem to find the issue. Error happens when from the webapp clicking on "Create IT Resource".
From the Error Log:
Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-82'
Line with issue from FormMetaData.xml:
<Attribute name="-82" label="global.label.itresourcetype" displayComponentType="LookupField" variantType="String" dataLength="255" map="IT Resources Type Definition.Server Type" useInRule="true">
<ValidValues lookupQuery="select svd_svr_type from svd" selectionColumn="svd_svr_type"/>
</Attribute>
Please let me know any additional information/questions. From what I can tell everything should be correct. Sorry again if the answer is obvious, I'm only 3 days into OIM.
Thank you,
Ryan

Error when displaying - on table control

hy guys,
im working with a table control..
the problem is when the table control loads a -200 or any number with - .
ERROR
DYNPRO_FIELD_CONVERSION
I already tried to change the format of the table field to currency, dec, char and numc
currency the error is displayed.
dec the error is displayed
char the column is displayed empty
numc the table is displayed but the - is not displayed in the field.
any ideas?
Edited by: javier santana on Sep 7, 2008 7:26 PM

Hi,
The problem mayb with the -ve value display, keep the format to currency and double click on the field in table control, u wil find a option to display -ve values select that
If -ve value is ur prob then this should work

Error when displaying modeling on MultiProvider, urgent!!!

Hi Expert,
There is one runtime error when I try to display modeling on MultiProvider. but It's OK to display ODS and Cube. Could anyone tell me how to do? I can't find any notes about this. Thanks a lot!!
Carlos
=============================
Message:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          07/28/2006 12:07:47
ShrtText
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
What can you do?
     Print out the error message (using the "Print" function)
     and make a note of the actions and input that caused the
     error.
     To resolve the problem, contact your SAP system administrator.
     You can use transaction ST22 (ABAP Dump Analysis) to view and administer
      termination messages, especially those beyond their normal deletion
     date.
     is especially useful if you want to keep a particular message.
Error analysis
     Short text of error message:
   Internal error
   Technical information about the message:
   Message classe...... "RSAWB"
   Number.............. 002
   Variable 1.......... " "
   Variable 2.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "MESSAGE_TYPE_X" C
    "CL_RSAWB_GENERAL_AWB==========CP" or "CL_RSAWB_GENERAL_AWB==========CM00O"
    "SHOW_INFOCUBE_DATAMODEL"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
    2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, select the Editor function "Further Utilities->
    Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.

these notes can be useful for you, depending of your BW release.
640945
950823
527086

ASSIGN_CAST_WRONG_ALIGNMENT error when displaying InfoCube data

Hi all,
I am getting an ABAP runtime error ASSIGN_CAST_WRONG_ALIGNMENT when I try to display data from an InfoCube. This only happens when I'm entering a filter for an InfoObject in the data selection screen, when I click on the "List of Values" box and select a value from there. Once I select the value, I get the runtime error. This is happening for InfoObject 0CALMONTH.
It seems this could be happening because the source InfoObject is 0ENTRY_DATE, type DATS, length 8; and the target InfoObject is 0CALMONTH, type NUMC, length 7. But the data is already loaded to the cube, and the data displays correctly in the cube and in queries. Why does the runtime error happen when I select from a list of values?
Can anyone help me in resolving this issue?
Thanks in advance!
CM

Update: I believe OSS notes 633674 and/or 651376 must be applied to resolve this.

Error Box displays in JClient Form with no text (preview 9.0.3)

I am using Preview 9.0.3, with a JClient Form, running as an applet. When I execute the applet within JDeveloper, an Error box displays, but has NO text. When I try to close the box, it just keeps redisplaying, with no text. I am using the -Djbo.debugoutput=console, and the last statement to be logged is the SELECT statement from the Entity Object I am working with.
Is there any other diagnostic logging I can turn on to find out what the error is?
Any ideas?

I am using Preview 9.0.3, with a JClient Form, running as an applet. When I execute the applet within JDeveloper, an Error box displays, but has NO text. When I try to close the box, it just keeps redisplaying, with no text. I am using the -Djbo.debugoutput=console, and the last statement to be logged is the SELECT statement from the Entity Object I am working with.
Is there any other diagnostic logging I can turn on to find out what the error is?
Any ideas? You may turn on the diagnostic on BC4J to see where things are breaking.
Open up Project settings. In the Runner panel, provide runtime option : -Djbo.debugoutput=console

Error: Cannot Display Page when Page1 invoke Page2

In page1 when click Add button will invoke page2.
Page1 Coding as below :
pageContext.setForwardURL(Constants.DETAIL_UPDATE_PG,
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAWebBeanConstants.IGNORE_MESSAGES);
Parameter pass (in property parameter):
txnId ${oa.current.FaoBudgetTransactionId}
detailId ${oa.current.BudgetDetailId}
periodId ${oa.current.BudgetPeriodId}
Page2 ( in processRequest ) Coding as below
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (!TransactionUnitHelper.isTransactionUnitInProgress(pageContext,
Constants.UPDATE_TXN, true)) {
// if back button is pressed
am.invokeMethod("rollback");
TransactionUnitHelper.endTransactionUnit(pageContext, Constants
.UPDATE_TXN);
OADialogPage dialogPage = new OADialogPage(NAVIGATION_ERROR);
pageContext.redirectToDialogPage(dialogPage);
} else {
// teth: added if
String createNew = pageContext.getParameter("createNew");
if (createNew != null && createNew.equalsIgnoreCase("Y")) {
OAViewObject masterVo = (OAViewObject) am.findViewObject(
"FaoBudPeriodsTempVO1");
if (masterVo == null) {
throw new OAException("Object FaoBudPeriodsTempVO1 not found.");
} else {
String txnId = pageContext.getParameter("txnId");
String detailId = pageContext.getParameter("detailId");
String periodId = pageContext.getParameter("periodId");
When page1 invoke it error as below.
Error: Cannot Display Page
You cannot complete this task because you accessed this page using the browser's navigation buttons (the browser Back button, for example).
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
Can somebody help me to solve this problem.
Thank you very much.

What is the value of Constants.DETAIL_UPDATE_PG ?
--Shiv

Sales Order Costing Error Log Display

When I look at Sales Order costing thru VA03 or when I run the Multi-level BOM costing for sales order CK87_99 I can not display the costing error log. I can generate the log thru VA02, but we need to limit the Sales Order change transaction to the Order Management group and did not want to give change order access to the product cost group.
Any options to get the costing error log from VA03?
Thanks

I cheeked OKY9 and the Update tab had the "Save Error Log" checked, but on the Misc tab the "Log Messages but do not save" on the error message field was selected. When I changed the selection to "Log and Save Message" this corrected my problem.
Your suggestion guided me in the right direction. Thanks,

Error message at the selection screen while processing screen logic

Hi All,
I need to show error message at the selection screen.
I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
Since I am in the middle of the screen processing whenever I am giving a error message.
Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
Regards,
Mahesh

hi
If u are trying to validate a field use
AT SELECTION_SCREEN ON <field>
if want to validate a block
AT SELECTION SCREEN ON <block>
If Universal Validation
AT SELECTION SCREEN
and display a 'E' Message inside the block.
You can Enter Correct Value and start processing Forward.
hope this will help.
Regards
Sumit Agarwal

Stale Data Error only Resolved by selecting "Use Update Batching"

Hello,
I'm having an issue after creating an update page in OAF. The page only works when I select update batching within my EO. The problem with this is my page is using a column type of BLOB which greys out the option to use update batching. I have tried everything I can think of as well as search on every possible topic over the internet to resolve this issue. Can't seem to figure it out. It has become very frustrating as to why I can only update the table by selecting update batching. Does anyone know how to overcome this issue?
Thanks,
Jeff

I resolved this issue. The reason I was receiving the stale data error was due to a custom table I created getting corrupted when adding the primary key through SQL Developer instead of doing coding it. After I recreated the table the stale data error stopped displaying. Hope this helps people in the future. Just remember to code the table creation instead of creating it through SQL Developer.

Web ui login error after business role selection

Dear All
I am keep facing the same problem while login to web ui from SAP CRM GUI thorugh transaction CRM_UI
it keep asking login after the selection of business role and then end up with the following error screen, kindly help to rectify the followimg error
Cannot display view BSPWD_BASICS/WorkAreaHostViewSet of UI Component CRM_UI_FRAME
An exception occurred during the internal HTTP communicationException Class CX_BSP_WD_HTTP_RESPONSE_ERROR
Text:
Additional Info: ICM_HTTP_CONNECTION_FAILED
Program: CL_BSP_WD_STREAM_LOADER=======CP
Include: CL_BSP_WD_STREAM_LOADER=======CM002
Thanks & Reagrs

Thank you so much
my problem is a bit resolved because of your kind help, web ui is working but still having the following errors on the top of the screen, when i log in through SALEPRO , knidly help
*An error occurred during initialization of the application*
*An exception occurred during the internal HTTP communication*
regards

Error Occured During Data Selection

Hi Community,
                       I got "Error Occured During Data Selection" when loading data from ODS to Info Cube. This info cube already contained data before but first time I didnt get complete records (both in ODS and Info Cube) so I deleted the request and load the data in both ODS and Info cube.
                      I got the records in ODS but when I am loading data from ODS to Info Cube then error displayed in Monitor display called "Error Occured During Data Selection"
                      I am working on BI 7.0. Please help me
Regds
Robbie.

Hi,
Have you deleted the <i>Delta inti info</i> available in the info package which is used to upload the data from ODS to Cube . Here you have to make it red and then delete it.
Other wise delete the row available in RSA7( in BIW) which was created at the time od the delta init from ODS to CUBE upload.
and aslo check the following link is relevent to your problem?
/message/2922612#2922612 [original link is broken]
With rgds,
Anil Kumar Sharma .P

Error Message Displayed while executing FNDLOAD Command in windows machine

Hi,
I am getting the following error message while executing the FNDLOAD Command in Windows Machine. Can any one give some clarifications to solve this issue.
FNDLOAD Command Used:*
+./FNDLOAD apps/[email protected]:1521:OA10 0 Y DOWNLOAD D:\oracle\oa10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS APPLICATION_SHORT_NAME=PO
Error message Displayed for above command:_
APP-FND-01564: ORACLE error 6401 in AFPCOA
Cause: AFPCOA failed due to ORA-06401: NETCMN: invalid driver designator
Let me know the solution this issue
Regards
Arif Mohammed

Hi Hussein,
Thanks for your response, Let me explain in detail that the error I am facing while running FNDLOAD Command.
I have executed the below command in CYGWIN which results in error while calling FNDLOAD.
*$ java oracle.apps.xdo.oa.util.XDOLoader DOWNLOAD -DB_USERNAME apps -DB_PASSWORD apps -JDBC_CONNECTION 16.89.26.52:1521:OA10 -LOB_TYPE TEMPLATE -APPS_SHORT_NAME PO -LCT_FILE $XDO_TOP/patch/115/import/xdotmpl.lct -LANGUAGE en -TERRITORY US -LOG_FILE SHW.log;*
I got the below error message while executed the above command (Highlighted in BOLD):
$ cat SHW.log
XDOLoader started: Tue Nov 15 20:27:18 PST 2011
Parameters passed to XDOLoader...
[TERRITORY] [US]
[DB_USERNAME] [apps]
[LCT_FILE] [C:\oracle\vis10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct]
[DOWNLOAD] [DOWNLOAD]
[JDBC_CONNECTION] [16.89.26.52:1521:OA10]
[LANGUAGE] [en]
[DB_PASSWORD] [apps]
[LOB_TYPE] [TEMPLATE]
[LOG_FILE] [SHW.log]
[APPS_SHORT_NAME] [PO]
Start downloading...
Downloading files from XDO_LOBS: SELECT FILE_DATA, LOB_CODE, LOB_TYPE, APPLICATI
ON_SHORT_NAME, FILE_NAME, LANGUAGE, TERRITORY, XDO_FILE_TYPE FROM XDO_LOBS WHERE
APPLICATION_SHORT_NAME = :APPS_SHORT_NAME AND LOB_TYPE in (:TEMPLATE, :TEMPLAT
E_SOURCE) AND LANGUAGE = :LANGUAGE AND TERRITORY = :TERRITORY
Downloading files from XDO_LOBS: SELECT L.FILE_DATA FILE_DATA, B.TEMPLATE_CODE L
OB_CODE, L.LOB_TYPE LOB_TYPE, L.FILE_NAME FILE_NAME, L.LANGUAGE LANGUAGE, L.TERR
ITORY TERRITORY, L.XDO_FILE_TYPE XDO_FILE_TYPE, L.APPLICATION_SHORT_NAME APPLICA
TION_SHORT_NAME FROM XDO_TEMPLATES_B B, XDO_LOBS L WHERE B.APPLICATION_SHORT_NAM
E = :APPS_SHORT_NAME AND B.TEMPLATE_CODE = L.LOB_CODE
Generating LDT file: xdotmpl.ldt
Calling FNDLOAD: FNDLOAD apps/[email protected]:1521:OA10 0 Y DOWNLOAD C:\oracle\
vis10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS
APPLICATION_SHORT_NAME=PO
APP-FND-01564: ORACLE error 6401 in AFPCOA
Cause: AFPCOA failed due to ORA-06401: NETCMN: invalid driver designator.
The SQL statement being executed at the time of the error was: and was executed
from the file .
Generating DRVX file: xdotmpl.drvx
XDOLoader done successfully: Tue Nov 15 20:27:30 PST 2011
$
So i decided to run the FNDLOAD Command alone in CYGWIN which is highlighted and still im facing the same issue but if i run the below command it works fine and getting download.
*./FNDLOAD apps/[email protected]:1521:OA10 0 Y DOWNLOAD D:\oracle\oa10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS APPLICATION_SHORT_NAME=PO*
Hope you understand the problem which im facing. Let me know some solutions from your side to solve this issue.
Regards,
Arif Mohammed

BB8530 - error in displaying ringtones selected

Similar Messages

Maybe you are looking for