BB8800 - How to use Desktop Software to Syn - to mail on laptop

I am using Lotus Notes Ver 6.53 and need help to syn - address book and task manager using
the USB cable -

Have you loaded Desktop Manager yet, to your PC? You should and then:
1. Connect your BlackBerry® device to your computer.
2. Open the BlackBerry Desktop Manager.
3. Double-click Synchronize.
4. On the Configuration tab, click Configure synch.
5. Select the Address Book check box.
6. Select the Application, in this case Lotus, to which you wish to sync.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How to connect Desktop Software with BES ?

Hi,
I have installed latest BB Desktop Software on a system other than BES (4.1.6). Also installed BB simulator 4.2.2 (8830) on same system. I connected the Simulator to Desktop software successfully using USB, but can't connect it with BES server (installed on separate system) .
Please tell me how to connect Desktop software with BES ?
regards,
Laeeq
Message Edited by laeeq on 02-11-2009 06:37 PM
Regards,
Laeeq Qazi
Team Lead (Exchange+BES) www.HostingController.com

Hi William,
Please make sure that Forward printing devices is checked. This allows you to use the local printer connects to your Mac in a remote desktop session.
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
Thanks.
Jeremy Wu
TechNet Community Support

Where do I find help on how to use a software?

Recently I've purchased a ZIP software through App Store - (Smart Zipper Pro). I have never used one of these programs and now have a large file to send to a customer. I found no customer support nor directions on the use of it.
I will appreciate there is someone that could help me understanding how to use this software. I have tried different alternatives but files seems to have the same size as the original. There is no compression.
Your help on this subject will be greatly appreciated.
AntaresPower

have a large file to send to a customer.
*Some suggestions regarding sending large files:*
If you both have High-speed connections, the easiest & fastest way is through Dropbox.
I send all my large/huge files this way instead of using email.
iChat has the same ability of transferring large files as Dropbox but is slower.
Adium has file transfers.
Yahoo Messenger has file transfers.
If you must use email, check out YouSendIt and TransferBIGFiles for large & small file transfers.
MediaFire is another file transfer site.
Care to share which OS you are using?

Bold 9900 won't update using desktop software

hello,
I have mountain lion on my Mac - using desktop software to update my bold 9900 to 7.1.0.2061.
It gets stuck after backing up third party applications and I get the error message - The device data could not be backed up, ensure that you can backup data on your device and try again.
I have done a factory reset and still same message. What is the problem? It won't run the update at all. Have backed up using blackberry protect as desktop software won't back up.
Any ideas?
thanks!

This could be caused by a third-party application. Have you tried to uninstall non critical "exotic" apps before launching the backup process?
Secondly, do you have enough space available on your computer hard disk?
The backup function works as expected on my Mac for 3 different BB devices.
Please don't forget to mark as "solved" if your question is replied and to "like" a useful reply to your post ;-)

Synchronize my Address Book using desktop Software Version 6.0 with the BlackBerry 8900

Everytime I try to Synchronize my Address Book with the BlackBerry 89000 using desktop Software Version 6.0 it crashes. I try doing task and calendar they work just fine, just on the address book it seems to crash anyone else has this problem? Desktop 6.0 phone software 5.0

Hiya!
Please be a little more specific.
What do you mean by crashes? Does your entire system shut down? do you get any error codes?
Thanks!
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

HT200246 I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE. HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE. HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

There are a number of resources. You might want to start with:
The User Manual:
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/
This Thread:
https://discussions.apple.com/message/22833760#22833760
or just do a google search, that should bring up plenty of tutorials from around the web.
Cheers!

How to use XML Anonymizer Module for receiver mail Adapter?

Hi All,
I would like to know how to use XML Anonymizer Module for receiver mail adapter so as to change the namespace to http://sap.com/xi/XI/Mail/30 from my original namespace? Thank you all in advance?

Hi,
This may help u:
Replacing one namespace with another using XML Anonymizer Module
Thanks
Amit

Using DeskTop Software to Sync my calendar

I recently purchased a new laptop. Previously I used the desktop software to sync my Microsoft Outlook calendar. I decided not to purchase Outlook this time and am using Windows Live Mail. However, when I sync, my calendar isn't updating on my phone (BB curve 8530) My carrier is Verizon and version is v5.0.0.973. Can anyone answer the question -am I able to sync my Live calendar and if so how?
BeadLady

From
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=B786F9DEB73FE BE22A4D2F911A97BC3C?externalId=KB35311&sliceId=2&cmd=displayKC&docType=kc&noCoun t=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl
BlackBerry Desktop Software utilizes Apple's SyncServices technology in order to synchronize Contact, Calendar, Notes, and Tasks information to and from the Mac computer.
BlackBerry Desktop Software synchronizes information with the SyncServices database, which is synchronized with the desktop applications on the Mac computer (for example: Apple Address Book, iCal, Apple Mail, Microsoft Outlook for Mac). BlackBerry Desktop Software does not synchronize directly to or from the desktop applications on the Mac computer.
Mac OS X Mavericks v10.9 and later does not use SyncServices, therefore, it is not possible to synchronize Contact or Calendar information using the BlackBerry Desktop Software on these versions of OS X.
For more information on SyncServices and OS X Mavericks, see the following Apple Support article:
http://support.apple.com/kb/HT5847
Note: BlackBerry Desktop software 2.4 is still supported for use with Mac OS X v10.6, 10.7, and 10.8.
Pete

How to Install Desktop Software 6 Silently

In previous versions of Blackberry Desktop Manger, there was a file in the installation directory called 'install.txt.' In this file were parameters for the [INSTALL_OPTIONS] tag, which you could copy/paste into the setup.ini file in the install directory to customize your installation.
Desktop Software 6 does not have the 'install.ext' file, but it does have the setup.ini file. I tried adding my old [INSTALL_OPTIONS] tags to the new setup.ini file but they don't work. I ran the setup.exe file with the /? tag to see if I could get any insight on how to install silently. All this gives me is the following:
Command line parameters:
/L language ID
/S Hide initialization dialog. For silent mode use: /S /v /qn.
/V parameters to MsiExec.exe
/UA<url to InstMsiA.exe>
/UW<url to InstMsiW.exe>
/UM<url to msi package>
/US<url to lsScript.msi>
Do any of these command line parameters actually work? Nope.
I am trying to perform silent installations of Desktop Manager, which is something I had no problem doing with previous versions, but now I can no longer perform silent installations. Any help would be much appreciated. Thank you.

Ended up solving my own problem.
For those of you that want a completely silent unattended installation of desktop manager, just run the Blackberry Desktop Software.msi file with a /qn tag. Simple enough.

How can I make AOL Desktop software my default e-mail when trying to connect from a a web site on Firefox?

When I click on a link on a website meant for e-mailing--using Windows 7 I no longer have the option of sending it through my AOL Desktop software as I used to in Windows XP. Is there an option in Firefox that will allow me to use the AOL Desktop software as my default e-mail program?

This didn't work. There is no option provided in Firefox for AOL--no add on either. And windows 7 does not let you use a browser based e-mail--even you change the registry--it will bring you to the AOL browser but won't open a "write" e-mail box and enter the name of the recipient automatically as it did in Windows XP by changing the option in internet options...someone must have a way of doing this...

Sync Problems between Blackberry 8330 and Outlook 2007 using Desktop software v 4.7

I have a Blackberry Curve 8330 and I have been experiencing some problems syncing it with my HP Notebook running Outlook 2007. I am using the most current Desktop Software version 4.7. I am using the BB Internet Service and all of my email accounts seem to be operating well. When I attempt to sync I receive the following errors in this sequence
Error 1: Intellisync; There are no applications configured for synchronization. From the synchronize screen, go to Configure > Synchronization to configure the applications.
At this point, I attempt to follow the above instructions and configure the applications I want to Sync. When I complete the above step for all applications, or each one seperately, I receive the following error:
Error 2: Runtime Error; Folder is no longer a part of the system data source or the folder can not be found.
As I stated above, I receive the error for all 4 applications (Address Book, Calendar, Memos and Tasks) whether they are configured seperately or all at once. I have unistalled the desktop software v4.7 5 times and Outlook 3 times. I am truly at a loss and in dire need of my Calendar and Contacts on my phone. If anyone has come across this in the past or has any ideas, Please feel free to comment or reply. Any info will be greatly appreciated!!!
BB: 8330 Curve
DS: Desktop Software v 4.7
PC: HP TX2500Z Notebook/Tablet
OS: Windows Vista Ultimate 64-Bit
DO: Microsoft Office Outlook 2007
Thanks,
Brian

uninstall the desktop manager, and install "4.7 without Media Manager"
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Using Desktop Software for Mac with an 8703e - Can it be done?

I downloaded the new BB desktop software for Mac but it doesn't seem to work with my 8703e device. And since I had to erase the PocketMac software to install the new BB software, I now have no way to synch my Mac and BB. Can anyone shed any light on this?

You might check out the FileBrowser app on iTunes. I haven't used it, but it sounds like what you're after. When you say you can't use the Sierra iG2 with your iPad, I'm assuming you mean you can't plug it into the iPad. If it's plugged into a laptop and offering a WiFi hotspot, the iPad should be good with that. I use the Apple Camera Connection Kit to carry extra movies on an SD card. It uploads only to the Photos app, so no books, etc.

How to use the software with BSD License, such as substance!

Hi everyone, any idea use the software with BSD License, such as substance?

Welcome to the forum
First of all let's be quite clear that whatever output you
generate, you do not need RoboHelp loaded on the end users PC.
You don't say whether you are planning to use RH HTML or RH
for Word. The latter has the advantage that you are working with a
tool that you understand but in my book there it ends. You want to
generate HTML topics for an intranet and that is best done using RH
HTML. It's much easier to make the output take on the appearance
you want.
Your software would open the help you create either at a
default topic or a specific topic. That is controlled by how your
developers call the help. No need to go into detail on that just
yet. There are a couple of topics on my site about that.
The next step depends on how you design things. Are you going
to create a page that describes a particular document that links to
the document or are you going to convert the document to a topic in
its own right?
- If you are planning to link to the Word document, then you
need to consider how a Word document would open from an intranet
link. See Snippets on my site. Perhaps another option would be to
create PDFs of the documents.
- If you are planning to import the documents and recreate
them as HTML topics, I suggest you have some aspirin handy.
Importing is a notorious problem area as you can see from topics on
my site. That said, those topics explain how to avoid the worst
problems. The fly in the ointment is that you are using Information
Mapping and those indents and tables will give you real fun!
You can create printed documentation but most of your site
will be stuff that you already have in Word format so you need to
include that in your design thinking.
As to books there really isn't that much around. There are
some links on the Useful Links page of my site but I don't think
they will help you much on this one. You could read this forum from
cover to cover!
Hope that helps a bit. Come back if you have some follow up
questions.

How to use orinda Software generated classess

hai all,
iam newly useing jdev any body tell me how to use orinda generated classes. can send me sample code for this & can u tell me what is use of this.

OrindaBuild examines your data dictionary and generates Java source code to run your PL/SQL procedures and Functions.
It can also generate Java to run any SQL statement you give it. The generated code does not require SQLJ.
General documentation can be found here:
http://www.orindasoft.com/public/Docstwo.php4
An example can be found here:
http://www.orindasoft.com/public/Exampletwo.php4
Say you have a PL/SQL package you want to access using JDBC:
CREATE OR REPLACE PACKAGE complex_example AS
TYPE city_pair_plsql_record IS RECORD (from_city flights.departure_city%type
                                      ,to_city   flights.arrival_city%type);
PROCEDURE flies_between_all (p_first_city_pair in city_pair_oracle_type
                            ,p_second_city_pair in city_pair_plsql_record
                            ,p_third_city_from in airports%ROWTYPE
                            ,p_third_city_to    in airports%ROWTYPE
                            ,p_airline_list     out simple_examples.airline_refcursor_type);
PROCEDURE get_table_of_flights_from (p_city         in     flights.departure_city%TYPE
                                    ,p_flights_from    out flights_table);
PROCEDURE add_bookings (p_customer       in     customers%ROWTYPE
                       ,p_booking_table in     bookings_table
                       ,p_status_message    out varchar2);
END;OrindaBuild would generate code like this:
package com.mycompany.myproject.generated;
import com.orindasoft.pub.CSException;
import com.orindasoft.pub.OracleResourceUser;
import com.mycompany.myproject.generated.plsql.*;
* WSDL Compatible Web Services Interface used by classes generated by OrindaBuild
* Generated by OrindaBuild 5.0 build 2342 at 2007/01/19 18:02:18 GMT
public interface DAOFactoryServiceInterface
public com.mycompany.myproject.generated.plsql.SimpleExamplesAirlineRefcursorTypeAttrs[]
servicePlsqlComplexExampleFliesBetweenAll
    (CityPairOracleTypeAttrs paramPFirstCityPair
    ,ComplexExampleCityPairPlsqlRecordAttrs paramPSecondCityPair
    ,AirportsAttrs paramPThirdCityFrom
    ,AirportsAttrs paramPThirdCityTo) throws DAOFactoryServiceException;
public FlightsTypeAttrs[] servicePlsqlComplexExampleGetTableOfFlightsFrom
    (String paramPCity) throws DAOFactoryServiceException;
public String servicePlsqlComplexExampleAddBookings
    (CustomersAttrs paramPCustomer
    ,BookingsTypeAttrs[] paramPBookingTable) throws DAOFactoryServiceException;
} // Generated by OrindaBuild 5.0                                                 The rest of the generated code for this example is available here:
http://www.orindasoft.com/public/Java2HTML
As you can see from the code above each procedure in the package is called by a method in the generated code. OrindaBuild is really useful is situations where the PL/SQL has complicated parameters.
David Rolfe
Orinda Software
Dublin, Ireland
null
null

Windows 7 wants to reformat my phone when I use Desktop Software

I plugged my Curve 9360 into the Desktop software prog version 7.1.0.32 on my PC and received a Windows pop-up message as follows:
"You need to format the disk in drive G: before you can use it.
Do you want to format it?"
The options were "Format disk" and "Cancel"
Obviously I pressed Cancel, but what on earth is going on???
Any help much appreciated.
Thanks

Hello Yelizaveta and welcome to the BlackBerry® Support Community Forums.
Do you have a Media Card inserted in your BlackBerry® Curve™ 9360 smartphone? If so, this message would be in reference to it.
When you go to use your device as a Mass Storage device, if your card is not formatted the computer will not be able to access your card.
If you remove your media card then reinsert it into your device, do you get any error message on your device? If so, what?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

BB8800 - How to use Desktop Software to Syn - to mail on laptop

Similar Messages

Maybe you are looking for