BBB Removal Success

Good afternoon, My Utility was reporting me dilinquent with 30, 60, 90, and even multiple 120's when I was on a payment plan and paying on time every month. After multiple calls and emails to them, getting no where but receiving plenty of attitude along the way, I decided to file a BBB complaint.  My complaint was completely legitamit.  I wasn't complaining about something that trully was or should have been in negative standing. So i stated that I wanted 2 accounts listed in negative standing (from my previous house and current house, it should have only been one account) completely closed. They sent me back some email stating that it was correct and that they would call me. I replied saying that I did not want them to call me as their customer service is lackluster and unhelpful and that I again would only accept these accounts being removed. They replied once again saying that it was justified. I responded back with an attachment of a previous bill (that I had saved last year, these can no longer be saved from that sight) and it showed where it stated what was due and that was what I paid.  They apparently knew they had no leg to stand on so a representative called me. She stated that they reviewed the account and would completely remove the old account from my credit report.  I said while I appreciate that, there has to be more that can be done.  I told her that this is preventing me from being able to buy a house. I told her I am always on time with my payments and simply paid what was asked of and agreed on with me. I asked her to please revisit it with her supervisors and she said she would and would contact me back.  I got a phone call about 2 hours later that said "Dan, you are very fortunate, my supervisors have agreed to completely remove all deragatories from your credit and delete the old account" HOW EXCITING IS THAT?! This has been a long time coming!!!! Persistance and escalation proves to be fruitful!  How much does anyone think my score will raise from this?  

Sweeet. If those are the only recent derogs in the last 24 months you could get a really nice score bump.

Similar Messages

  • Remove success message from VA01

    Hola buenos días,
    what i am looking for if it is possible to remove sucess message after calling transaction with call transaction abap statement, in the case i am asking for is to remove from status bar the message "Successfully sales order XXXXXX created", i do not see that posiibility in any of the options of this statement.
    Correct answer will be apprecciate.
    Saludos.

    Did you try
    Overwrite with your own blank message
    Replace the CALL TRANSACTION with FM ABAP4_CALL_TRANSACTION starting another task and waiting til completion (jackhammer to crack a nut...)
    Aaything else ?
    Regards,
    Raymond

  • IPod Scratch Removal Success Story

    in trying to pry the near impossible-to-remove Speck See-Thru case from my two-day old iPod with Video, having to use force and knowing the risk of potential scratching, i was horrified when, "POP," the case came off, only to leave behind a large, 1.5" gouge right across the upper right corner of the screen on.
    my brand new iPod with Video. scratched. my heart sank.
    so, i began the research into scratch removal products. most of the stuff i found online (iCleaner, iDrops, Ice Creme, etc) all claimed to do the job, but they were both expensive and i would have to wait. i wanted something quicker.
    so, i ended up going to an auto parts retailer and purchasing a bottle of Mother's California Gold Scratch Remover, the same product used to remove scratches from cars, cars with clearcoating, fiberglass cars, and fiberglass boats. it cost under $5 (USD).
    i also bought a $5 (USD) natural chamoise ("shammy") cloth. it's super-soft and again, used on a variety of cars, boats, etc.
    within twenty minutes of set-up, actual application/buffing of the iPod, and cleanup, the gouge that scarred the iPod was completely gone. GONE.
    leftover were some very, very faint swirl marks from using pressure when buffing. from everything i've read, this was totally common and normal, since the iPod's front is clear acrylic.
    for me, it was a pricesless trade-off to have some barely noticable swirl marks versus the giant gouge on the screen.
    today, i purchased a $3 (USD) metal polishing product at my local Lowe's hardware, called Brasso, which is raved about online as the do-it-all iPod cleaner. i will use this to shine-out the remaining swirls.
    overall, very happy with the choice i made, and thought i'd share to possibly benefit someone else in the future. i hope this post was helpful!
    good luck.
    8500, G4Cube, 2x2Ghz G5; Nano2, iPod20, Photo60, Video60   Mac OS X (10.3.4)   Original Mac user since 1985

    sounds like a good trick! however, for the gouge i mentioned above, liquid soap didn't cut it for me. i tried several "home remedies" before reaching for the big guns. another trick i'd heard about (and yes, even tried) was Colgate's Whitening toothpaste. some folks will swear by it. all it did for my iPod was make it smell minty for a spell. hehe
    thx for the tip, tho. i think all efforts are valuable.
    i should add also, that i just ordered the Power Support Crystal film skins and the Agent 18 VideoShield case to protect the iPod in the future. i've used the ClickShield for my iPod Photo and it was the best investment.
    peace!

  • Uninstall Adobe Shockwave 12.1.1.151 scripts run successfully but doesn't uninstall program

    I am using sccm2012 R2 and trying to deploy package to uninstall Adobe shockwave player 12.1.1.151 using following script
    cmd /c shockwave-test.bat
    pushd "%~dp0"
    msiexec /uninstall sw_lic_full_installer.msi
    If run script manually on command prompt it uninstall Adobe shockwave player but deployment using sccm doesn't work.
    Deployment status - success,
    Message ID: 10008
    program completed with success
    Program and features still have Adobe shockwave player listed there.
    I have also tried msiexec /x using product code as application using windows installer and registry key as detection method but same results
    Here are logs of Execmgr.log file
    Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="AO10022F",ProgramID="Uninstall shockwave - test", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
    execmgr 06/11/2014 6:45:07 PM
    2480 (0x09B0)
      Processing [{40BF1D3A-8F3D-4088-A1F7-ED85EB5EFF7F}, 0]: OnContentAvailable
    execmgr
    06/11/2014 6:45:11 PM 4664 (0x1238)
    [{40BF1D3A-8F3D-4088-A1F7-ED85EB5EFF7F}]: Content Version 12 is available for advert RET210E2, pkg: AO10022F, program Uninstall shockwave - test.
    execmgr 06/11/2014 6:45:11 PM
    4664 (0x1238)
    An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task.
    execmgr 06/11/2014 6:45:11 PM
    4664 (0x1238)
    Request a MTC task for execution request of package AO10022F, program Uninstall shockwave - test with request id: {CBD5312D-CAAB-446C-BB2F-7DB515F6EE79}
    execmgr 06/11/2014 6:45:11 PM
    4664 (0x1238)
    Execution Request for advert RET210E2 package AO10022F program Uninstall shockwave - test state change from WaitingContent to Ready
    execmgr 06/11/2014 6:45:12 PM
    4664 (0x1238)
    MTC task with id {CBD5312D-CAAB-446C-BB2F-7DB515F6EE79}, changed state from 0 to 4
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="AO10022F",ProgramID="Uninstall shockwave - test", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
    execmgr 06/11/2014 6:45:12 PM
    4664 (0x1238)
      Processing [{40BF1D3A-8F3D-4088-A1F7-ED85EB5EFF7F}, 0]: RemoveNotification
    execmgr 06/11/2014 6:45:12 PM
    4664 (0x1238)
    MTC signaled SWD execution request with program id: Uninstall shockwave - test, package id: AO10022F for execution.
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Sending ack to MTC for task with id: {CBD5312D-CAAB-446C-BB2F-7DB515F6EE79}
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Executing program cmd /c shockwave-test.bat in Admin context
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Execution Request for advert RET210E2 package AO10022F program Uninstall shockwave - test state change from Ready to NotifyExecution
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="AO10022F",ProgramID="Uninstall shockwave - test", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Checking content location C:\Windows\ccmcache\1g for use
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Successfully selected content location C:\Windows\ccmcache\1g
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Executing program as a script execmgr
    06/11/2014 6:45:12 PM 1624 (0x0658)
    Found executable file cmd with complete path C:\Windows\system32\cmd.exe
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Successfully prepared command line "C:\Windows\system32\cmd.exe" /c shockwave-test.bat
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Command line = "C:\Windows\system32\cmd.exe" /c shockwave-test.bat, Working Directory = C:\Windows\ccmcache\1g\
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Running "C:\Windows\system32\cmd.exe" /c shockwave-test.bat with 32bitLauncher
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Created Process for the passed command line
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Raising event:
    [SMS_CodePage(437), SMS_LocaleID(1033)]
    instance of SoftDistProgramStartedEvent
    ClientID = "GUID:d0c3da0e-ff4f-48c2-8612-805a8de31191";
    CommandLine = "\"C:\\Windows\\system32\\cmd.exe\" /c shockwave-test.bat";
    DateTime = "20141107004512.476000+000";
    PackageName = "AO10022F";
    ProcessID = 1264;
    ProgramName = "Uninstall shockwave - test";
    ThreadID = 1624;
    UserContext = "NT AUTHORITY\\SYSTEM";
    WorkingDirectory = "C:\\Windows\\ccmcache\\1g\\";
    execmgr
    06/11/2014 6:45:12 PM 1624 (0x0658)
    Raised Program Started Event for Ad:xx210E2, Package:AO10022F, Program: Uninstall shockwave - test
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="AO10022F",ProgramID="Uninstall shockwave - test", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="AO10022F",ProgramID="Uninstall shockwave - test", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    MTC task with id {CBD5312D-CAAB-446C-BB2F-7DB515F6EE79}, changed state from 4 to 5
    execmgr 06/11/2014 6:45:12 PM
    1624 (0x0658)
    Program exit code 0 execmgr
    06/11/2014 6:45:21 PM 4276 (0x10B4)
    Looking for MIF file to get program status execmgr
    06/11/2014 6:45:21 PM 4276 (0x10B4)
    Thanks in advance for help and suggestions
    RJ
    RJ09

    Thanks for quick reply Daniel
    I tried your suggestion and in log files I found error
     Product: Adobe Shockwave Player 12.1 -- Error 2753.The File 'swhelper_1211151.exe' is not marked for installation.
    Error 2753.The File 'swhelper_1211151.exe' is not marked for installation.
    Property(S): ErrorDialog = SetupError
    MSI (s) (34:D8) [14:08:29:832]: Windows Installer removed the product. Product Name: Adobe Shockwave Player 12.1. Product Version: 12.1.1.151. Product Language: 1033. Manufacturer: Adobe Systems, Inc. Removal success or error status: 1603.
    RJ09

  • Problem removing bundles from group with ZLMAN

    I am having trouble removing a bundle from a bundlegroup with the zlman utility. The syntax I am using seems correct and the groups and bundle name are also.
    Here is the command and it's output from the command with the debug option: (if I use a bogus name for the package the output will tell me that the bundle was removed successfully :-)
    This ZLM72IR2 with Hot-Patch 3
    Any ideas?
    Thanks
    command:
    zlman bgr -U administrator -P xxxxxx -V -d Patches/Servers/sles10-sp1/Pre-Prod-security patch-slesp1-yast2-core-4623_SLES10-SP1-Updates
    output:
    com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFault={_Message=An error occurred while trying to remove the grouping data.,_Type=5}
    at sun.reflect.NativeConstructorAccessorImpl.newInsta nce0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInsta nce(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newI nstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Construc tor.java:274)
    at java.lang.Class.newInstance0(Class.java:308)
    at java.lang.Class.newInstance(Class.java:261)
    at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFaultMarshaler.deserialize(CoreAPIFaultMarsh aler.java:35)
    at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:433)
    at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:410)
    at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:372)
    at com.sssw.jbroker.web.core.InputStreamImpl.readObje ct(InputStreamImpl.java:278)
    at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2682)
    at com.novell.zenworks.zlman.commands.Commands.groupR emove(Commands.java:598)
    at com.novell.zenworks.zlman.commands.BundleCommands. execute(BundleCommands.java:1286)
    at com.novell.zenworks.zlman.ZLMan.main(ZLMan.java:28 0)
    Caused by: com.sssw.jbroker.web.portable.ApplicationException
    at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2689)
    ... 3 more
    [5] Fatal Error: An error occurred while trying to remove the grouping data.

    brunold,
    I created a bundlegroup called Testbundle directly under the /Bundles container and tried to remove a couple of different patches. The results were the same. My server is SLES10SP2 64-bit by the way.
    Thanks,
    Frank
    zlman bgr -U administrator -P dnctl2RA -V -d Testbundle patch-slesp1-915resolution-4728_SLES10-SP1-Updates
    com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFault={_Message=An error occurred while trying to remove the grouping data.,_Type=5}
    at sun.reflect.NativeConstructorAccessorImpl.newInsta nce0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInsta nce(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newI nstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Construc tor.java:274)
    at java.lang.Class.newInstance0(Class.java:308)
    at java.lang.Class.newInstance(Class.java:261)
    at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFaultMarshaler.deserialize(CoreAPIFaultMarsh aler.java:35)
    at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:433)
    at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:410)
    at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:372)
    at com.sssw.jbroker.web.core.InputStreamImpl.readObje ct(InputStreamImpl.java:278)
    at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2682)
    at com.novell.zenworks.zlman.commands.Commands.groupR emove(Commands.java:598)
    at com.novell.zenworks.zlman.commands.BundleCommands. execute(BundleCommands.java:1286)
    at com.novell.zenworks.zlman.ZLMan.main(ZLMan.java:28 0)
    Caused by: com.sssw.jbroker.web.portable.ApplicationException
    at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2689)
    ... 3 more
    [5] Fatal Error: An error occurred while trying to remove the grouping data.
    zlmprd1:/var/opt/novell/zenworks/scripts/movepatches # zlman bgr -U administrator -P dnctl2RA -V -d Testbundle patch-slesp1-915resolution-4728_SLES10-SP1-Updates
    com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFault={_Message=An error occurred while trying to remove the grouping data.,_Type=5}
    at sun.reflect.NativeConstructorAccessorImpl.newInsta nce0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInsta nce(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newI nstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Construc tor.java:274)
    at java.lang.Class.newInstance0(Class.java:308)
    at java.lang.Class.newInstance(Class.java:261)
    at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIFaultMarshaler.deserialize(CoreAPIFaultMarsh aler.java:35)
    at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:433)
    at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:410)
    at com.sssw.jbroker.web.soap.LiteralEncodingStyle.rea dObject(LiteralEncodingStyle.java:372)
    at com.sssw.jbroker.web.core.InputStreamImpl.readObje ct(InputStreamImpl.java:278)
    at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2682)
    at com.novell.zenworks.zlman.commands.Commands.groupR emove(Commands.java:598)
    at com.novell.zenworks.zlman.commands.BundleCommands. execute(BundleCommands.java:1286)
    at com.novell.zenworks.zlman.ZLMan.main(ZLMan.java:28 0)
    Caused by: com.sssw.jbroker.web.portable.ApplicationException
    at com.novell.zenworks.zlman.services.coreapi.admin.C oreAPIBinding_Stub.removeMembers(CoreAPIBinding_St ub.java:2689)
    ... 3 more
    [5] Fatal Error: An error occurred while trying to remove the grouping data.

  • Report on IR block removed

    Dear ALL,
    please advcie me is there any standard report available in SAP to meet the below requirement.
    A report listing PO's were R-Blocked Documents were removed successfully.
    MRBR only shows only blocked invoices. i need report on block removed documents.
    TIA
    KOGI

    hi,
    Also check ME87...
    If you want more details or only details as per your requirement its better to go for SQVI query generation with the help of table EKBE which stores the PO history..
    Regards
    Priyanka.P

  • Remove mailbox database copy from DAG

    Hi There,
    We would like to remove the mailbox database copy from our exchange server as we are lack of the space on our fixed vhd and we hope to be able to free about 100GB from the passive database copies as we have deployed DAG. is there any guidelines or procedures
    to safely remove the database copies? currently, we have 4 mailbox servers, HQMB01, HQMB02, SSMB01, and SSMB02. HQMB01 and HQMB02 is already part of DAG members by itself. however, on ssmb01 and ssmb02, we also add in HQMB01 and HQMB02 as the DAG member,
    thus they can fail over to HQMB01 or HQMB02 if their server have issue. in this situation, SSMB01 and SSMB02 passive copies is also inside our HQMB01 and HQMB02. As the our HQMB01 and HQMB02 is lack of the disk space and we would like to remove SSMB01
    and SSMB02 from the DAG, thus we could remove the passive database copies. The following is the picture of the activation preference for all servers. what is the procedures and the guidelines to remove mailbox database copy and also remove the server from
    the DAG members? we are quite confuse and worry that after we are removing wrongly and cause the active database to lost as we understand that there is replication happening between them. as we have 4 mailbox servers from which server we should perform
    the task? Wish to get some advises from the exchange guru from this forum. we are on exchange server 2010 sp1 and windows server 2008 R2.Thanks so much.
    Name                 : HQDB01
    Servers              : {HQMB01, HQMB02}
    ActivationPreference : {[HQMB01, 1], [HQMB02, 2]}
    ReplayLagTimes       : {[HQMB01, 00:00:00], [HQMB02, 00:00:00]}
    TruncationLagTimes   : {[HQMB01, 00:00:00], [HQMB02, 00:00:00]}
    Name                 : HQDB02
    Servers              : {HQMB02, HQMB01}
    ActivationPreference : {[HQMB02, 1], [HQMB01, 2]}
    ReplayLagTimes       : {[HQMB02, 00:00:00], [HQMB01, 00:00:00]}
    TruncationLagTimes   : {[HQMB02, 00:00:00], [HQMB01, 00:00:00]}
    Name                 : SSDB01
    Servers              : {SSMB01, SSMB02, HQMB01, HQMB02}
    ActivationPreference : {[SSMB01, 1], [SSMB02, 2], [HQMB01, 3], [HQMB02, 4]}
    ReplayLagTimes       : {[SSMB01, 00:00:00], [SSMB02, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}
    TruncationLagTimes   : {[SSMB01, 00:00:00], [SSMB02, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}
    Name                 : SSDB02
    Servers              : {SSMB02, SSMB01, HQMB01, HQMB02}
    ActivationPreference : {[SSMB02, 1], [SSMB01, 2], [HQMB01, 3], [HQMB02, 4]}
    ReplayLagTimes       : {[SSMB02, 00:00:00], [SSMB01, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}
    TruncationLagTimes   : {[SSMB02, 00:00:00], [SSMB01, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}

    Hi Exchange Guru,
    thanks so much for the prompt response..i have few queries to ask following your guidelines above:
    1. from the show result above, I am still confuse which server that I should go to remove as this is involving 4 database copies. from what I understand from the truncation or replay lag times of SSDB01 and SSDB02, I can see that HQMB01 and HQMB02 are on
    the third and fourth preference, which means that SSDB01 and SSDB02 will be able to failover to each of them when there is a failure and it cause the passive copies of both of SSDB01 and SSDB02 to be stored in the HQMB01 and HQMB02. what my purpose
    is to remove both SSDB01 and SSDB02 passive copies in HQMB01 and HQMB02. in this case, should I login to SSDB01 or SSDB02 mailbox servers to perform the removal with your guidelines above?
    2. is the command as below:
    Remove-MailboxDatabaseCopy -Identity SSDB01\HQMB01 -Confirm:$False
    Remove-MailboxDatabaseCopy -Identity SSDB01HQMB02 -Confirm:$False
    Remove-MailboxDatabaseCopy -Identity SSDB02\HQMB01 -Confirm:$False
    Remove-MailboxDatabaseCopy -Identity SSDB02\HQMB02 -Confirm:$False 
    will this cause the risk either of my HQDB01, HQDB02, SSDB01, and SSDB02 active copies accidentally  being removed? I am sorry that I am a bit naggy and always want a confirmation as this is very critical and I must be super careful.
    3. If after the removal successful, when is the best time to go to the drive where the passive copies stored and remove them so I can clear some space on  my disk? and is it just as simple by going to the drive and do a folder file deletion manually?
    because I just worry when I delete the file and the server is still replicating between each other, which will cause even corruption to the active database.
    4. From point 3, you mention about when the server is empty. what do you mean by that? do you mean that when the passive copies are no more there? and what command that I used to check?
    5. From point 4, is removing the server from DAG the last step to be performed? yes, I want to remove them from DAG, thus will left only HQMB01 and HQMB02 as one DAG and SSMB01 and SSMB02 as one DAG.
    Thank so so much for your patient and attention.
    Regards,
    Henry

  • Srvctl remove listener

    Hi,
    I try to cleanup my Cluster according to Metalink
    Steps to Remove Node from Cluster When the Node Crashes Due to OS/Hardware Failure and cannot boot up [ID 466975.1]
    Oracle Version: 10.2.0.4
    Problem:
    srvctl remove listener
    seems to be unknown to system - looks like that srvctl does not know the object: listener
    oracle@node1:/crs_home/bin> srvctl remove listener ora.node2.LISTENER_node2.lsnr
    Usage: srvctl <command> <object> [<options>]
    oracle@node1:/crs_home/bin> srvctl remove listener
    Usage: srvctl <command> <object> [<options>]
    oracle@node1:/crs_home/bin>
    But in the HELP it shows the object listener
    oracle@node1:/crs_home/bin> srvctl remove
    Usage: srvctl <command> <object> [<options>]
    command: enable|disable|start|stop|relocate|status|add|remove|modify|getenv|setenv|unsetenv|config
    objects: database|instance|service|nodeapps|asm|_listener_
    For detailed help on each command and object and its options use:
    srvctl <command> <object> -h
    oracle@node1:/crs_home/bin>
    Question:
    Is it also possible to use crs_unregister to remove the listener ?
    From the Metalink document:
    The srvctl remove listener command used below is only applicable in 10204 and higher releases including 11.1.0.6. The command will report an error if the clusterware version is less than 10204. If clusterware version is less than 10204, use netca to remove the listener
    But I have version 10.2.0.4 - and netca won´t delete the listener, because the maschines are not available
    Christian

    Hi,
    I cannot remove the listener and vip entries
    node1:/oracle/product/10.2.0/db_1/bin # ./srvctl remove nodeapps -n node3
    Please confirm that you intend to remove the node-level applications on node node3 (y/[n]) y
    PRKO-2112 : Some or all node applications are not removed successfully on node: node3
    node1:/oracle/product/10.2.0/db_1/bin # exit
    logout
    oracle@node1:/crs_home/bin> ./crs_stat -t
    Name Type Target State Host
    ora.feuer.db application ONLINE ONLINE node1
    ora....r1.inst application ONLINE ONLINE node1
    ora....SM1.asm application ONLINE ONLINE node1
    ora....C1.lsnr application ONLINE ONLINE node1
    ora.node1.gsd application ONLINE ONLINE node1
    ora.node1.ons application ONLINE ONLINE node1
    ora.node1.vip application ONLINE ONLINE node1
    ora....C2.lsnr application OFFLINE OFFLINE
    ora.node2.vip application OFFLINE OFFLINE
    ora....C3.lsnr application OFFLINE OFFLINE
    ora.node3.vip application OFFLINE OFFLINE
    oracle@node1:/crs_home/bin>

  • Has Hell Froze Over and No one Told Me???? HSBC Removing CO!!!!

    Received a letter from Capital One aka HSBC that they were in fact deleting all reference to their account from my credit reports. WOW I was NOT expecting that!!! I was waiting to see how that GW went before I sent one to Capital One themselves. They are my last baddie. Guess it's worth a shot right????

    baller4life wrote:
    Received a letter from Capital One aka HSBC that they were in fact deleting all reference to their account from my credit reports. WOW I was NOT expecting that!!! I was waiting to see how that GW went before I sent one to Capital One themselves. They are my last baddie. Guess it's worth a shot right????Congrats!   Cap One seems more flexible on the old HSBC CCs.   I was able to get my HSBC CO removed and Cap One stated they would purge their records of the account.   I had settled with a CA on it and also had GW removal success with them. Now if Cap One would just budge on my settled CO with them...

  • PowerShell script to Retract & Remove all farm solutions

    Hi,
    I need the PowerShell script to Retract & Remove all SharePoint farm solutions.
    Single solution Retract & Remove
    Uninstall-SPSolution -Identity <Solution name.wsp>
    ex: Uninstall-SPSolution -Identity Solution.wsp
    Remove-SPSolution -Identity <Solution name.wsp>
    ex: Remove-SPSolution -Identity Solution.wsp

    Install & Uninstall solutions from folder
    file name - installwsp.ps1
    Add-PsSnapin Microsoft.SharePoint.PowerShell
    #Do not modify anything in the script from here onwards
    function Get-ScriptDirectory
    $Invocation = (Get-Variable MyInvocation -Scope 1).Value
    Split-Path $Invocation.MyCommand.Path
    function Deploy-Solution{
    param(
    [string]$physicalPath,
    [string]$name)
    $SolutionName = $name
    $SolutionPath = Join-Path ($physicalPath) $SolutionName
    echo "Extracting information from $physicalPath"
    #Admin service
    $AdminServiceName = "SPAdminV4"
    $IsAdminServiceWasRunning = $true;
    if ($(Get-Service $AdminServiceName).Status -eq "Stopped")
    $IsAdminServiceWasRunning = $false;
    Start-Service $AdminServiceName
    Write-Host 'SERVICE WAS STOPPED, SO IT IS NOW STARTED'
    #Uninstall
    Write-Host 'UNINSTALLING SOLUTION ...'
    $Solution = Get-SPSolution | ? {($_.Name -eq $SolutionName) -and ($_.Deployed -eq $true)}
    if ($Solution -ne $null)
    if($Solution.ContainsWebApplicationResource)
    Uninstall-SPSolution $SolutionName -AllWebApplications -Confirm:$false
    else
    Uninstall-SPSolution $SolutionName -Confirm:$false
    while ($Solution.JobExists)
    Start-Sleep 2
    Write-Host 'SOLUTION HAS BEEN UNINSTALLED SUCCESSFULLY.'
    Write-Host 'REMOVING SOLUTION ...'
    if ($(Get-SPSolution | ? {$_.Name -eq $SolutionName}).Deployed -eq $false)
    Remove-SPSolution $SolutionName -Confirm:$false
    Write-Host 'SOLUTION HAS BEEN REMOVED SUCCESSFULLY.'
    Write-Host 'ADDING SOLUTION ...'
    Add-SPSolution $SolutionPath | Out-Null
    Write-Host 'SOLUTION HAS BEEN ADDED SUCCESSFULLY.'
    Write-Host 'DEPLOYING SOLUTION ...'
    $Solution = Get-SPSolution | ? {($_.Name -eq $SolutionName) -and ($_.Deployed -eq $false)}
    #use '-force' paramater to install all commands in this if statement
    if(($Solution -ne $null) -and ($Solution.ContainsWebApplicationResource))
    Install-SPSolution $SolutionName –AllwebApplications -GACDeployment -Force -Confirm:$false
    else
    Install-SPSolution $SolutionName -GACDeployment -Force -Confirm:$false
    while ($Solution.Deployed -eq $false)
    Start-Sleep 2
    Write-Host 'SOLUTION HAS BEEN DEPLOYED SUCCESSFULLY.'
    if (-not $IsAdminServiceWasRunning)
    Stop-Service $AdminServiceName
    #Get Current Physical Path
    $currentPhysicalPath = Get-ScriptDirectory
    #Iterate through all .wsp files in the current Physical Path to deploy solution
    get-childitem $currentPhysicalPath -include *.wsp -recurse | foreach ($_) {Deploy-Solution $currentPhysicalPath $_.name}
    #Remove SharePoint Snapin
    Remove-PsSnapin Microsoft.SharePoint.PowerShell
    Echo Finish
    Usage file name - installwsp.bat
    cd /c %~dp0
    powershell -noexit -file "installwsp.ps1" "%CD%"
    pause
    Anandhan.S Remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.

  • MediaSync removes music, even though that music is selected

    This has happened a few times. Using the Blackberry Desktop Manager for Mac, I have several playlists selected for syncing (and these have been the same since I set this up). When I sync, sometimes the music sync takes a long time. So I open the log window to discover that this is removing music, rather then syncing it. This is what the log shows:
    2010-04-22 01:47:25.665 INFO     default     MediaSync Updating; remove DTrack <song>
    2010-04-22 01:47:25.672 INFO     default     MediaSync File removed successfully: /Volumes/BLACKBERRY2/BlackBerry/music/Media Sync/<song>
    2010-04-22 01:47:25.684 ERROR*** default     MediaSync Cannot open file at: <path>/<song>
    2010-04-22 01:47:25.685 ERROR*** default     MediaSync Failed to copy track from: <path>/<song> to: /Volumes/BLACKBERRY2/BlackBerry/<song>
    Every song that was on the blackberry is gone after this. Then if I sync again, the songs are placed back on the blackberry. This process takes "hours"!

    Is no one else having this issue? Is it me alone? Anyone care to contribute? Anyone at BB take notice?

  • Which List should be used, to remove in a thread safe way?

    Hello all,
    I plan to have a List, where n number of Threads will accessing the List.
    When two or more thread trying to remove an equals items from the List, only one of the thread will remove successfully (i,e, remove(Object o) will return true). The rest of the threads will realize remove(Object o) returns false
    I wish to achieve this. I know that I can achieve by using :
    Collections.synchronizedList(new ArrayList(...))However, I afraid having the synchronized block will slow down my execution speed. Is there other way, that I achieve the same objective with faster speed? For example, using CopyOnWriteArrayList?
    Thanks!

    Sorry,
    I said "badly" because it is synchornized by putting "synchronized" keyword on most of the methods prototypes.
    Which equals to synchronizing on "this".
    In my opinion, one problem of this implementation is that 2 calls to a get() method will be synchronized wherever they dont need to. (As get() does not modify the vector). [See Edit]
    One other is you can synchronize on the Vector's mutex (itself) outside of the Vector's code.
    And at last, as synchronizedList is not implemented by a Vector and is more recent than the Vector implementation...
    I guess they implemented it in another way for many good reasons...
    [Edit]
    As i can see in Collections, the synchronizedList is implemented in the same way.
    BUT, as the synchronized keyword is not in the method's prototype, we can expect the implementation to be changed a day...
    And vector is a kind of old object kept for backward compatibility i guess. (someone can confirm ?). ("As of the Java 2 platform v1.2, this class has been retrofitted to implement List, so that it becomes a part of Java's collection framework.")
    @KwangHooi
    You can write your own implementation of a List which will not synchronize on the same token for both read/write operations. (but, i guess it could be hard to avoid deadlocks)

  • Active Directory Web Services service terminated unexpectedly

    Hi everyone:
    I'm having a problem with the Active Directory Web Services service does not start. Attach the event ID:
    Log System:
    Log Name: System
    Source: Service Control Manager
    Date: 1/6/2015 6:55:19 PM
    Event ID: 7034
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: xxx.dominio.com
    Description:
    The Active Directory Web Services service terminated unexpectedly. It has done this 35 time(s).
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7034</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-06T22:55:19.292471600Z" />
    <EventRecordID>32583</EventRecordID>
    <Correlation />
    <Execution ProcessID="556" ThreadID="1388" />
    <Channel>System</Channel>
    <Computer>xxx.dominio.com</Computer>
    <Security />
    </System>
    <EventData>
    <Data Name="param1">Active Directory Web Services</Data>
    <Data Name="param2">35</Data>
    <Binary>41004400570053000000</Binary>
    </EventData>
    </Event>
    Log Application:
    Log Name: Application
    Source: .NET Runtime
    Date: 1/6/2015 6:55:13 PM
    Event ID: 1026
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: xxx.dominio.com
    Description:
    Application: Microsoft.ActiveDirectory.WebServices.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.ServiceModel.CommunicationObjectFaultedException
    Stack:
    at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
    at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
    at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
    at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
    at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
    at System.Threading.ThreadHelper.ThreadStart(System.Object)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-06T22:55:13.000000000Z" />
    <EventRecordID>1661713</EventRecordID>
    <Channel>Application</Channel>
    <Computer>xxx.dominio.com</Computer>
    <Security />
    </System>
    <EventData>
    <Data>Application: Microsoft.ActiveDirectory.WebServices.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.ServiceModel.CommunicationObjectFaultedException
    Stack:
    at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
    at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
    at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
    at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
    at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
    at System.Threading.ThreadHelper.ThreadStart(System.Object)
    </Data>
    </EventData>
    </Event>
    And
    Log Name: Application
    Source: Application Error
    Date: 1/6/2015 6:55:13 PM
    Event ID: 1000
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: xxx.dominio.com
    Description:
    Faulting application name: Microsoft.ActiveDirectory.WebServices.exe, version: 6.2.9200.16579, time stamp: 0x516356a2
    Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
    Exception code: 0xe0434352
    Fault offset: 0x0000000000047b8c
    Faulting process id: 0x4ac
    Faulting application start time: 0x01d02a03d45e2d00
    Faulting application path: C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: 1273a0f1-95f7-11e4-93f7-3440b59e2092
    Faulting package full name:
    Faulting package-relative application ID:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-06T22:55:13.000000000Z" />
    <EventRecordID>1661714</EventRecordID>
    <Channel>Application</Channel>
    <Computer>xxx.dominio.com</Computer>
    <Security />
    </System>
    <EventData>
    <Data>Microsoft.ActiveDirectory.WebServices.exe</Data>
    <Data>6.2.9200.16579</Data>
    <Data>516356a2</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.2.9200.16864</Data>
    <Data>531d34d8</Data>
    <Data>e0434352</Data>
    <Data>0000000000047b8c</Data>
    <Data>4ac</Data>
    <Data>01d02a03d45e2d00</Data>
    <Data>C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe</Data>
    <Data>C:\Windows\system32\KERNELBASE.dll</Data>
    <Data>1273a0f1-95f7-11e4-93f7-3440b59e2092</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    </EventData>
    </Event>
    I was working about this solution but nothing. "http://blogs.microsoft.co.il/yuval14/2012/06/08/how-to-resolve-error-message-the-active-directory-web-services-service-terminated-unexpectedly-event-id-4079-andor-7034/".
    I changed the Microsoft.ActiveDirectory.WebServices.exe.config file, add two line " <add key=”DebugLevel” value=”Info” />
    <add key=”DebugLogFile” value=”c:windowsdebugadws.log” />", Attach the log
    ADWS Log - AppDomain Microsoft.ActiveDirectory.WebServices.exe with ID 1 - 01/06/2015 17:51:37 ((UTC-04:00) Georgetown, La Paz, Manaus, San Juan)
    OS Version Microsoft Windows NT 6.2.9200.0 - CLR Version 4.0.30319.18449
    ADWS: [1/6/2015 5:51:37 PM] [1] Main: entered
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeBackupPrivilege
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeBackupPrivilege priviledge because it was absent
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeRestorePrivilege
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeRestorePrivilege priviledge because it was absent
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeAssignPrimaryTokenPrivilege
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeAssignPrimaryTokenPrivilege priviledge because it was absent
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeIncreaseQuotaPrivilege
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeIncreaseQuotaPrivilege priviledge because it was absent
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeDebugPrivilege
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeDebugPrivilege priviledge because it was absent
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeTcbPrivilege
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeTcbPrivilege priviledge because it was absent
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeShutdownPrivilege
    Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeShutdownPrivilege priviledge because it was absent
    Utils: [1/6/2015 5:51:37 PM] [1] RemoveUnnecessaryPriviledges: all present unnecessary priviledges removed successfully
    Program: [1/6/2015 5:51:37 PM] [1] Main: Starting Windows service host.
    WindowsHostService: [1/6/2015 5:51:37 PM] [1] WindowsHostService constructed
    WindowsHostService: [1/6/2015 5:51:37 PM] [4] OnStart: entering.
    WindowsHostService: [1/6/2015 5:51:37 PM] [4] OnStart: ServiceStart thread started.
    WindowsHostService: [1/6/2015 5:51:37 PM] [6] StartService: entering.
    PerfCounters: [1/6/2015 5:51:37 PM] [6] InstallCountersIfNeeded: entered
    PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersInstalled: entered
    PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersInstalled: System\CurrentControlSet\Services\ADWS key is present
    PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersInstalled: System\CurrentControlSet\Services\ADWS\Performance key is present
    PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersInstalled: First Counter value is present
    PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersInstalled: perf counters are installed
    PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersCurrent: installed perf counter version: 6
    PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersCurrent: desired perf counter version: 6
    PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersCurrent: perf counter category ADWS is current
    PerfCounters: [1/6/2015 5:51:37 PM] [6] InstallCountersIfNeeded: counters already installed and current, no work needed
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Create Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Delete Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Get Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Put Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Enumerate Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Pull Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Open Enumeration Contexts' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADGroupMember Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADPrincipalGroupMembership Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'SetPassword Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'ChangePassword Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADPrincipalAuthorizationGroup Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'TranslateName Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADDomainController Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADDomain Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'MoveADOperationMasterRole Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADForest Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'ChangeOptionalFeature Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetVersion Operations Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Number of Directory Instances' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Possible Connections' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Allocated Connections' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Reserved Connections' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Non-reserved Connections In Use' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Reserved Connections In Use' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Open Web Service Sessions' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Active Web Service Sessions' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Web Service Sessions Created Per Second' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action LDAP Cache Maximum Possible Size' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action LDAP Cache Connection Creation Rate' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action LDAP Cache Connection Reuse Rate' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action DS RPC Cache Maximum Possible Size' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action DS RPC Cache Connection Creation Rate' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action DS RPC Cache Connection Reuse Rate' performance counter
    AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action Cache Size' performance counter
    PerfCounters: [1/6/2015 5:51:37 PM] [6] Initialize: initializing performance counters
    PerfCounters: [1/6/2015 5:51:37 PM] [6] Initialize: all performance counters initialized
    ADWSHost: [1/6/2015 5:51:37 PM] [6] ADWSHost constructed
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] ProvisionCertificate: using host name for certificate name
    Utils: [1/6/2015 5:51:37 PM] [6] GetComputerDnsName: computer name is xxx.dominio.com
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] ProvisionCertificate: using cert name xxx.dominio.com
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] ProvisionCertificate: loaded certificate
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] AddServiceThrottlingBehavior: MaxConcurrentCalls=32, MaxConcurrentSessions=500
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateServiceHost: including UserName endpoints
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateServiceHost: adding endpoints for Windows/
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateServiceHost: adding endpoints for UserName/
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
    ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] StartConfigurationLoading: entered
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] StartConfigurationLoading: establishing watcher on C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe.Config
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: entered
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for InitialPoolConnections, using default value 5
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 10 for MaxPoolConnections
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 50 for MaxPercentageReservedConnections
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for MaxReservedIdleTimeout, using default value 00:02:00
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for MaxReservedTimeout, using default value 00:30:00
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 5 for MaxConnectionsPerUser
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for MaxBindLifetime, using default value 00:15:00
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for MaxServerDownRetry, using default value 10
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for SyntaxCacheEntryLifetime, using default value 01:00:00
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 00:30:00 for MaxEnumContextExpiration
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 00:02:00 for OperationTimeout
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 00:02:00 for MaxPullTimeout
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 5 for MaxEnumCtxsPerSession
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 100 for MaxEnumCtxsTotal
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for CertName, using default value NULL
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for MaxGroupOrMemberEntries, using default value 5000
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for CustomActionConnectionCount, using default value 10
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for CustomActionIdleConnectionTimeout, using default value 00:02:00
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for InstanceRediscoveryInterval, using default value 00:01:00
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 32 for MaxConcurrentCalls
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 500 for MaxConcurrentSessions
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value Info for DebugLevel
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value C:\temp\windowsdebugadws.log for DebugLogFile
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] ValidateSettingLimits: entered
    ClassManager: [1/6/2015 5:51:37 PM] [6] Start: starting...
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [3] ScavengerThread: thread starting
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [3] Scavenger: waking up at 00:00:40 interval
    EnumerationContextCache: [1/6/2015 5:51:37 PM] [6] EnumerationContextCache: using timer inverval 00:00:30
    InstanceMap: [1/6/2015 5:51:37 PM] [6] InstanceMap: using timer inverval 00:01:00
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadAll: beginning
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadNTDSInstance: entered
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadNTDSInstance: found NTDS Parameters key
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadNTDSInstance: trying to change state to DC
    InstanceMap: [1/6/2015 5:51:37 PM] [6] AddRemoveSessionPoolAndDictionaryEntry: trying to change state for identifier ldap:389
    InstanceMap: [1/6/2015 5:51:37 PM] [6] AddSessionPool: adding a session pool for NTDS
    DirectoryDataAccessImplementation: [1/6/2015 5:51:37 PM] [6] InitializeInstance: entering, instance=NTDS, init=5, max=10
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] InitializeInstance: entering, instance=NTDS, init=5, max=10
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 0
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=NTDS
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=NTDS, new count=1, max=10
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 1
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=NTDS
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=NTDS, new count=2, max=10
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 2
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=NTDS
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=NTDS, new count=3, max=10
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 3
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=NTDS
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=NTDS, new count=4, max=10
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 4
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=NTDS
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=NTDS, new count=5, max=10
    InstanceMap: [1/6/2015 5:51:37 PM] [6] AddRemoveSessionPoolAndDictionaryEntry: state change successful (now hosts identifier ldap:389)
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadGCInstance: entered
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckForGlobalCatalog: entered
    DirectoryUtilities: [1/6/2015 5:51:37 PM] [6] GetTimeRemaining: remaining time is 00:02:00
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckForGlobalCatalog: isGlobalCatalogReady: TRUE
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckForGlobalCatalog: NTDS Settings DN: CN=NTDS Settings,CN=XXX,CN=Servers,CN=Alpacoma,CN=Sites,CN=Configuration,DC=dominio,DC=com
    DirectoryUtilities: [1/6/2015 5:51:37 PM] [6] GetTimeRemaining: remaining time is 00:02:00
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckForGlobalCatalog: options: 1
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadGCInstance: CheckForGlobalCatalog=True
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadGCInstance: trying to change state to Global Catalog
    InstanceMap: [1/6/2015 5:51:37 PM] [6] AddRemoveSessionPoolAndDictionaryEntry: trying to change state for identifier ldap:3268
    InstanceMap: [1/6/2015 5:51:37 PM] [6] AddSessionPool: adding a session pool for GC
    DirectoryDataAccessImplementation: [1/6/2015 5:51:37 PM] [6] InitializeInstance: entering, instance=GC, init=5, max=10
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] InitializeInstance: entering, instance=GC, init=5, max=10
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 0
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=GC
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=GC, new count=1, max=10
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 1
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=GC
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=GC, new count=2, max=10
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 2
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=GC
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=GC, new count=3, max=10
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 3
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=GC
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=GC, new count=4, max=10
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 4
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=GC
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=GC, new count=5, max=10
    InstanceMap: [1/6/2015 5:51:37 PM] [6] AddRemoveSessionPoolAndDictionaryEntry: state change successful (now hosts identifier ldap:3268)
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadADAMInstances: entered
    InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadAll: caught unexpected exception System.IO.IOException: No more data is available.
    at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
    at Microsoft.Win32.RegistryKey.InternalGetSubKeyNames()
    at Microsoft.ActiveDirectory.WebServices.InstanceMap.DiscoverInstancesFromRegistry(String regRootKey, String regKeyInstancePrefix, Boolean& instanceEncounteredErrorsOnThisRun, List`1 discoveredInstances, DirectoryType directoryType)
    at Microsoft.ActiveDirectory.WebServices.InstanceMap.CheckAndLoadADAMInstances()
    at Microsoft.ActiveDirectory.WebServices.InstanceMap.CheckAndLoadAll()
    ADWSHost: [1/6/2015 5:51:37 PM] [6] OnClosed: entered
    CustomActionCaches: [1/6/2015 5:51:37 PM] [6] StopCaches: disposing Custom Action connection caches
    ClassManager: [1/6/2015 5:51:37 PM] [6] Stop: closing down...
    EnumerationContextCache: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    QuotaTracker: [1/6/2015 5:51:37 PM] [6] Clear: clearing all usage
    DirectoryActionImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    DirectoryDataAccessImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [3] ScavengerThread: woke up
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [3] ScavengerThread: received termination signal, exiting
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing pool
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing (instance=NTDS)...
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ProhibitConnectionAcquisition: entering, instance=NTDS
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing pool
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing (instance=GC)...
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] ProhibitConnectionAcquisition: entering, instance=GC
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
    ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing utility connection NTDS
    LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing utility connection GC
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] StopConfigurationLoading: entered
    ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] Dispose: disposing
    Some Idea, Tks for your help.
    migrations

    Here a dump file when I try to start the service, I hope can you help me.
    Version=1
    EventType=CLR20r3
    EventTime=130652059133527283
    ReportType=2
    Consent=1
    ReportIdentifier=4368792e-974e-11e4-93f7-3440b59e2092
    IntegratorReportIdentifier=4368792d-974e-11e4-93f7-3440b59e2092
    NsAppName=Microsoft.ActiveDirectory.WebServices.exe
    Response.type=4
    Sig[0].Name=Problem Signature 01
    Sig[0].Value=V0KXCIQIJBOA2NW5DIQBFTEBV5SCPPFH
    Sig[1].Name=Problem Signature 02
    Sig[1].Value=6.2.9200.16579
    Sig[2].Name=Problem Signature 03
    Sig[2].Value=516356a2
    Sig[3].Name=Problem Signature 04
    Sig[3].Value=System.ServiceModel
    Sig[4].Name=Problem Signature 05
    Sig[4].Value=4.0.30319.34230
    Sig[5].Name=Problem Signature 06
    Sig[5].Value=53be5c02
    Sig[6].Name=Problem Signature 07
    Sig[6].Value=ca
    Sig[7].Name=Problem Signature 08
    Sig[7].Value=c4
    Sig[8].Name=Problem Signature 09
    Sig[8].Value=I0SHPZEWVQV4P1UJY40X15MQTHF34RR5
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.2.9200.2.0.0.272.7
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=1033
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=5220
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=52200675db6baa97bf416b02ff886e01
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=0b14
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=0b146b7eb5ed6bd9871c898c60ee5051
    UI[2]=C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe
    UI[5]=Check online for a solution (recommended)
    UI[6]=Check for a solution later (recommended)
    UI[7]=Close
    UI[8]=Microsoft.ActiveDirectory.WebServices stopped working and was closed
    UI[9]=A problem caused the application to stop working correctly. Windows will notify you if a solution is available.
    UI[10]=&Close
    LoadedModule[0]=C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe
    LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
    LoadedModule[2]=C:\Windows\SYSTEM32\MSCOREE.DLL
    LoadedModule[3]=C:\Windows\system32\KERNEL32.dll
    LoadedModule[4]=C:\Windows\system32\KERNELBASE.dll
    LoadedModule[5]=C:\Windows\SYSTEM32\dlphook.x64.dll
    LoadedModule[6]=C:\Windows\SYSTEM32\VERSION.dll
    LoadedModule[7]=C:\Windows\system32\PSAPI.DLL
    LoadedModule[8]=C:\Windows\system32\ADVAPI32.dll
    LoadedModule[9]=C:\Windows\system32\WS2_32.dll
    LoadedModule[10]=C:\Windows\system32\msvcrt.dll
    LoadedModule[11]=C:\Windows\SYSTEM32\sechost.dll
    LoadedModule[12]=C:\Windows\system32\RPCRT4.dll
    LoadedModule[13]=C:\Windows\system32\NSI.dll
    LoadedModule[14]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscoreei.dll
    LoadedModule[15]=C:\Windows\system32\SHLWAPI.dll
    LoadedModule[16]=C:\Windows\system32\USER32.dll
    LoadedModule[17]=C:\Windows\system32\GDI32.dll
    LoadedModule[18]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
    LoadedModule[19]=C:\Windows\SYSTEM32\MSVCR110_CLR0400.dll
    LoadedModule[20]=C:\Windows\assembly\NativeImages_v4.0.30319_64\mscorlib\51fbf5aac9c6f1aef14557276f98ad28\mscorlib.ni.dll
    LoadedModule[21]=C:\Windows\system32\ole32.dll
    LoadedModule[22]=C:\Windows\SYSTEM32\combase.dll
    LoadedModule[23]=C:\Windows\SYSTEM32\CRYPTBASE.dll
    LoadedModule[24]=C:\Windows\SYSTEM32\bcryptPrimitives.dll
    LoadedModule[25]=C:\Windows\SYSTEM32\CRYPTSP.dll
    LoadedModule[26]=C:\Windows\system32\rsaenh.dll
    LoadedModule[27]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clrjit.dll
    LoadedModule[28]=C:\Windows\system32\OLEAUT32.dll
    LoadedModule[29]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System\803e478b5cb2fe994c4f977853849956\System.ni.dll
    LoadedModule[30]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Serv759bfb78#\060758702287150a3b9ca51bfbd135e4\System.ServiceProcess.ni.dll
    LoadedModule[31]=C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.Shared.dll
    LoadedModule[32]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Configuration\af08c33d3e853168e58f0bb32118170b\System.Configuration.ni.dll
    LoadedModule[33]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Core\5641065f716dfd6c76dd7bc6ab18c47a\System.Core.ni.dll
    LoadedModule[34]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Xml\b3344890d2d919e93f506faabd08186a\System.Xml.ni.dll
    LoadedModule[35]=C:\Windows\system32\urlmon.dll
    LoadedModule[36]=C:\Windows\system32\iertutil.dll
    LoadedModule[37]=C:\Windows\system32\WININET.dll
    LoadedModule[38]=C:\Windows\system32\USERENV.dll
    LoadedModule[39]=C:\Windows\system32\profapi.dll
    LoadedModule[40]=C:\Windows\SYSTEM32\Secur32.dll
    LoadedModule[41]=C:\Windows\SYSTEM32\SSPICLI.DLL
    LoadedModule[42]=C:\Windows\system32\SHELL32.dll
    LoadedModule[43]=C:\Windows\SYSTEM32\SHCORE.dll
    LoadedModule[44]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Dire5d62f0a2#\7ab37f1ca732666c1ab41d8e500942e0\System.DirectoryServices.Protocols.ni.dll
    LoadedModule[45]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.ServiceModel\4e643cb8b12402db89eb2d5839872b78\System.ServiceModel.ni.dll
    LoadedModule[46]=C:\Windows\assembly\NativeImages_v4.0.30319_64\SMDiagnostics\02b9ba874b1c07b6016aa9406745e96b\SMDiagnostics.ni.dll
    LoadedModule[47]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Web.Services\f936aad8a951da6674d460db1855a3db\System.Web.Services.ni.dll
    LoadedModule[48]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Servd1dec626#\8944debbd3293f930c7e37b64aed0d77\System.ServiceModel.Internals.ni.dll
    LoadedModule[49]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.IdentityModel\5844c97798b9e56b45cb0e5d3505ffd2\System.IdentityModel.ni.dll
    LoadedModule[50]=C:\Windows\system32\crypt32.dll
    LoadedModule[51]=C:\Windows\system32\MSASN1.dll
    LoadedModule[52]=C:\Windows\SYSTEM32\DPAPI.dll
    LoadedModule[53]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Runteb92aa12#\3838e7c87e962eaec01572bff0396922\System.Runtime.Serialization.ni.dll
    LoadedModule[54]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Servf73e6522#\38df17ed0feec9b27d7d33272eecc176\System.ServiceModel.Web.ni.dll
    LoadedModule[55]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Dired13b18a9#\4ecba93b4eae5bb0c97205c4e4196702\System.DirectoryServices.ni.dll
    LoadedModule[56]=C:\Windows\system32\wldap32.dll
    LoadedModule[57]=C:\Windows\system32\mswsock.dll
    LoadedModule[58]=C:\Windows\SYSTEM32\DNSAPI.dll
    LoadedModule[59]=C:\Windows\System32\rasadhlp.dll
    LoadedModule[60]=C:\Windows\System32\fwpuclnt.dll
    LoadedModule[61]=C:\Windows\SYSTEM32\IPHLPAPI.DLL
    LoadedModule[62]=C:\Windows\SYSTEM32\WINNSI.DLL
    LoadedModule[63]=C:\Windows\SYSTEM32\DSPARSE.dll
    LoadedModule[64]=C:\Windows\system32\kerberos.DLL
    LoadedModule[65]=C:\Windows\SYSTEM32\cryptdll.dll
    LoadedModule[66]=C:\Windows\SYSTEM32\bcrypt.dll
    LoadedModule[67]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\diasymreader.dll
    FriendlyEventName=Stopped working
    ConsentKey=CLR20r3
    AppName=Microsoft.ActiveDirectory.WebServices
    AppPath=C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe
    NsPartner=windows
    NsGroup=windows8
    Tks for your help.
    migrations

  • How to make the Creative Cloud Uninstaller run silently ?

    Hi all,
    We created a deployment using Adobe Application Manager (AAMEE) in order to deploy Adobe Creative Cloud silently.  That works fine.  Now, when we uninstall the software, by running msiexec /x {productcode_of_the_msi_that_was_generated_using_AAMEE}, there's a log entry in the Event Viewer saying Removal success or error status: 0, which is good.  However, there's one remaining entry in the "Programs and Features"-list in Windows 7 control panel: "Adobe Creative Cloud"
    So I took a look in the registry and I found the uninstall string for that program: "C:\Program Files (x86)\Adobe\Adobe Creative Cloud\Utils\Creative Cloud Uninstaller.exe".  Problem: this uninstaller won't run silently!  Or at least I didn't find any switches / command line parameters to make it run silently.  Does anyone know how to make it run silently?
    Question for Adobe in case there are no silent options for this uninstaller : can you explain me why you create tools (AAMEE) to generate silent installers but still leave traces on the computer that can't be uninstalled silently???
    As an application packager I would also like to address this general message to all the big software making companies out there (SAP, Oracle, Microsoft, Adobe etc.) : other big companies that buy your software, mostly want to install and uninstall it without user intervention.  So please package it so that we don't need to spend extra time and money deciphering your fancy, exotic installers / uninstallers.  MSI is quite a good standard you know...
    Thanks all of you!

    Hi,
    If I understood correctly, you have created an installation package including creative cloud desktop app through creative cloud packager not AAMEE.
    Adobe creative cloud doesn’t get uninstalled even if all the products and updates are removed from machine. But this will not cause any issues (or extra space) on installation of new package.
    Its recommended that if the package is modified (adding more products or updates to existing package) and installed then it should be uninstalled via msi of modified package.
    Thanks,
    Ashish

  • MaxDB install failure on Win 2003 Server

    Win 2003 Server
    MaxDB v 7.6.05.09
    HP Proliant G5
    Good morning,
    We've got a problem with a MaxDB install on a fresh Win 2003 server.
    - The first install process and the demo database worked fine
    - We tried to create a new database instance and it hung. As nothing was working as expected we decided to uninstall maxdb and all its component and to re-start from a clean process. That's were things are becoming weird :
    - The first time the setup assistant hung when installing the kernel
    - The secund time the setup assistant hung when installing the demo database
    - Every following test hangs when installing the kernel
    We tried to do a clean uninstall MaxDB, to watch which registry keys we should restore... but nothings worked as expected.
    We found a link at this address describing the same problem but it doesn't provide us anything to solve our problem.
    Here is our log file :
    INSTALLER_INFO: Version = 7.6.05 Build 009-123-191-997
    INSTALLER_INFO: Changelist = 191997
    INSTALLER_INFO: MakeId = 323091
    INSTALLER_INFO: Type = kit
    SYS_INFO: Host name = SRVBATINOR
    SYS_INFO: System = Windows
    SYS_INFO: Architecture = I386
    SYS_INFO: Version = NT 5.2
    SYS_INFO: Subversion = Service Pack 2
    MSG: collector found 12 archives
    MSG: debug package SDBBAS.SDB is valid
    MSG: debug package SDBKRN.SDB is valid
    MSG: debug package SDBUTL.SDB is valid
    MSG: initializing package "Base"
    MSG: calling preinstall...
    MSG: service "sql6" in  "C:/WINDOWS/system32/drivers/etc/services" found
    MSG: service "sapdbni72" in  "C:/WINDOWS/system32/drivers/etc/services" found
    MSG: Template set indep data path to "c:/documents and settings/all users/application data/sdb/data"
    MSG: Template set indep programs path to "c:/program files/sdb/programs"
    ACTION: make directory "c:/documents and settings/all users/application data/sdb/data/config" mode "775"
    ACTION: make directory "c:/documents and settings/all users/application data/sdb/data/config/install" mode "775"
    MSG: InstallRegistry: space check ok: 41676028 kb on C: (51203980 kb total) available
    MSG: install registry successfully locked
    MSG: InstallRegistry::Log: space check ok: 41676028 kb on C: (51203980 kb total) available
    MSG: writing 0 packages
    MSG: net install registry size = 63 bytes
    MSG: wrote install registry (125 bytes)
    MSG: InstallRegistry: reserved 1024 kb disk space
    getRelease():C:/Program Files/SDB/MAXDB1/pgm/kernel.exe not found
    MSG: migrate server installation data for INSTROOT "c:/program files/sdb/maxdb1"
    MSG: initializing package "Server Utilities"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "Database Kernel"
    MSG: calling preinstall...
    MSG: Template or instance update set dependent path to c:/program files/sdb/maxdb1
    Msg: checking update of package "Database Kernel" in C:Program Filessdbmaxdb1
    MSG: installed package is flaged as invalid => skipping update check
    MSG: initializing package "Redist Python"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "Loader"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "ODBC"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "Messages"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "JDBC"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "Synchronization Manager"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "SQLDBC"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "MaxDB PHP Driver"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "DB Analyzer"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    ACTION: make directory "C:/Program Files/sdb" mode "555"
    ACTION: make directory "C:/Program Files/sdb/programs" mode "555"
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBBAS.TGZ"
    MSG: running postprepare of package Base
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBUTL.TGZ"
    ACTION: make directory "C:/Program Files/sdb/MAXDB1" mode "555"
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBKRN.TGZ"
    MSG: running postprepare of package Database Kernel
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBRDPY.TGZ"
    MSG: running postprepare of package Redist Python
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBLD.TGZ"
    MSG: running postprepare of package Loader
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBODBC.TGZ"
    MSG: running postprepare of package ODBC
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBMSG.TGZ"
    MSG: running postprepare of package Messages
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBJDBC.TGZ"
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SYNCMAN.TGZ"
    MSG: running postprepare of package Synchronization Manager
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBC.TGZ"
    MSG: running postprepare of package Database Connectivity
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBPHP.TGZ"
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBANA.TGZ"
    MSG: running postprepare of package DB Analyzer
    MSG: space check ok: 41672820 kb on  (51203980 kb total) available
    MSG: packagedata of package Base changed
    MSG: writing 2 packages
    MSG: net install registry size = 4113 bytes
    MSG: wrote install registry (5162 bytes)
    STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBBAS.TGZ"
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:58:53 bin/
    STDOUT: extracting: -rwxr-xr-x       802816 2008-08-15 21:53:13 bin/dbmevtdisp.exe
    STDOUT: extracting: -rwxr-xr-x       294912 2008-08-15 21:49:43 bin/protconv.exe
    STDOUT: extracting: -rwxr-xr-x       151552 2008-08-15 20:11:07 bin/sdbconfig.exe
    STDOUT: extracting: -rwxr-xr-x         7168 2008-08-16 00:57:39 bin/SDBINST.EXE
    STDOUT: extracting: -rwxr-xr-x         6144 2008-08-16 00:57:40 bin/sdbpack.exe
    STDOUT: extracting: -rwxr-xr-x         7680 2008-08-16 00:57:40 bin/sdbreg.exe
    STDOUT: extracting: -rwxr-xr-x         7680 2008-08-16 00:57:40 bin/sdbregview.exe
    STDOUT: extracting: -rwxr-xr-x        13824 2008-08-16 00:57:39 bin/SDBSETUP.EXE
    STDOUT: extracting: -rwxr-xr-x         7680 2008-08-16 00:57:39 bin/sdbuninst.exe
    STDOUT: extracting: -rwxr-xr-x         7168 2008-08-16 00:57:40 bin/sdbverify.exe
    STDOUT: extracting: -rwxr-xr-x      1257472 2008-08-16 00:35:29 bin/sqlcli.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xsysrc.exe
    STDOUT: extracting: -rwxr-xr-x       323584 2008-08-15 20:24:45 bin/xtcpupd.exe
    STDOUT: extracting: -rwxr-xr-x       294912 2008-08-15 19:55:07 bin/xuser.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_ping.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:58:53 install/
    STDOUT: extracting: -rwxr-xr-x       192512 2008-08-16 00:54:07 install/Grid.dll
    STDOUT: extracting: -rwxr-xr-x       757760 2008-08-16 00:41:09 install/perl58.dll
    STDOUT: extracting: -rw-rr       117099 2008-08-16 00:57:38 install/RESOURCES.TGZ
    STDOUT: extracting: -rw-rr       465022 2008-08-16 00:57:38 install/SDBINST.TGZ
    STDOUT: extracting: -rwxr-xr-x       421888 2008-08-16 00:57:27 install/sdbrun.dll
    STDOUT: extracting: -rwxr-xr-x      1245184 2008-08-16 00:56:33 install/Wx.dll
    STDOUT: extracting: -rwxr-xr-x      2265088 2008-08-16 00:53:37 install/wxmsw24.dll
    STDOUT: extracting: -rw-rr        64327 2008-08-16 00:57:42 install/WXPERL.TGZ
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:58:54 pgm/
    STDOUT: extracting: -rwxr-xr-x      2101248 2008-08-15 21:49:55 pgm/dbmcli.exe
    STDOUT: extracting: -rwxr-xr-x      2101248 2008-08-15 21:49:55 pgm/dbmcli_HelpInst.exe
    STDOUT: extracting: -rwxr-xr-x       217088 2008-08-15 22:11:27 pgm/regupd.exe
    STDOUT: extracting: -rwxr-xr-x       307200 2008-08-15 20:25:09 pgm/sqlping.exe
    STDOUT: extracting: -rwxr-xr-x        49152 2008-08-15 19:46:03 pgm/sqltcp.dll
    STDOUT: extracting: -rwxr-xr-x        49152 2008-08-15 19:46:03 pgm/sqltcp1.dll
    STDOUT: extracting: -rwxr-xr-x        49152 2008-08-15 19:46:05 pgm/sqltcp2.dll
    STDOUT: extracting: -rwxr-xr-x        45056 2008-08-15 19:46:07 pgm/sqltcpn.dll
    STDOUT: extracting: -rwxr-xr-x       281952 2008-08-16 00:58:28 pgm/sqluser72.dll
    STDOUT: extracting: -rwxr-xr-x       372672 2008-08-16 00:58:32 pgm/sqluser73.dll
    STDOUT: extracting: -rwxr-xr-x       393216 2008-08-16 00:58:35 pgm/sqluser74.dll
    STDOUT: extracting: -rwxr-xr-x       438272 2008-08-16 00:58:38 pgm/sqluser74n.dll
    STDOUT: extracting: -rwxr-xr-x       524288 2008-08-16 00:15:41 pgm/sqluser76.dll
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:01 Support/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:02 Support/Mapfiles/
    STDOUT: extracting: -rw-rr      3023564 2008-08-15 21:49:54 Support/Mapfiles/dbmcli.map
    STDOUT: extracting: -rw-rr      1265024 2008-08-15 21:53:13 Support/Mapfiles/dbmevtdisp.map
    STDOUT: extracting: -rw-rr       115063 2008-08-15 20:28:06 Support/Mapfiles/sqltcp.map
    STDOUT: extracting: -rw-rr       115066 2008-08-15 20:28:07 Support/Mapfiles/sqltcp1.map
    STDOUT: extracting: -rw-rr       115148 2008-08-15 20:28:09 Support/Mapfiles/sqltcp2.map
    STDOUT: extracting: -rw-rr       108889 2008-08-15 20:28:13 Support/Mapfiles/sqltcpn.map
    STDOUT: extracting: -rw-rr       125887 2008-08-16 00:58:30 Support/Mapfiles/sqluser72.map
    STDOUT: extracting: -rw-rr       147341 2008-08-16 00:58:33 Support/Mapfiles/sqluser73.map
    STDOUT: extracting: -rw-rr       258131 2008-08-16 00:58:36 Support/Mapfiles/sqluser74.map
    STDOUT: extracting: -rw-rr       739428 2008-08-16 00:58:39 Support/Mapfiles/sqluser74n.map
    STDOUT: extracting: -rw-rr       916710 2008-08-16 00:15:41 Support/Mapfiles/sqluser76.map
    STDOUT: extracting: -rw-rr       593052 2008-08-15 20:24:45 Support/Mapfiles/xtcpupd.map
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:04 symbols/
    STDOUT: extracting: -rw-rr      8252416 2008-08-15 21:49:54 symbols/dbmcli.pdb
    STDOUT: extracting: -rw-rr      3836928 2008-08-15 21:53:13 symbols/dbmevtdisp.pdb
    STDOUT: extracting: -rw-rr       289792 2008-08-15 20:28:06 symbols/sqltcp.pdb
    STDOUT: extracting: -rw-rr       289792 2008-08-15 20:28:07 symbols/sqltcp1.pdb
    STDOUT: extracting: -rw-rr       289792 2008-08-15 20:28:09 symbols/sqltcp2.pdb
    STDOUT: extracting: -rw-rr       281600 2008-08-15 20:28:13 symbols/sqltcpn.pdb
    STDOUT: extracting: -rw-rr      1887232 2008-08-16 00:58:37 symbols/sqluser74.pdb
    STDOUT: extracting: -rw-rr      2059264 2008-08-16 00:58:40 symbols/sqluser74n.pdb
    STDOUT: extracting: -rw-rr      4705280 2008-08-15 20:24:44 symbols/xtcpupd.pdb
    STDOUT: checking unpacked archive... MSG: check file "Support/Mapfiles/sqluser72.map": ok
    MSG: check file "symbols/sqltcpn.pdb": ok
    MSG: check file "pgm/dbmcli_HelpInst.exe": ok
    MSG: check file "bin/x_ping.exe": ok
    MSG: check file "Support/Mapfiles/sqluser74.map": ok
    MSG: check file "bin/SDBINST.EXE": ok
    MSG: check file "install/SDBINST.TGZ": ok
    MSG: check file "pgm/sqluser74.dll": ok
    MSG: check file "symbols/dbmcli.pdb": ok
    MSG: check file "symbols/sqltcp1.pdb": ok
    MSG: check file "bin/SDBSETUP.EXE": ok
    MSG: check file "pgm/sqluser74n.dll": ok
    MSG: check file "Support/Mapfiles/sqltcp.map": ok
    MSG: check file "bin/protconv.exe": ok
    MSG: check file "symbols/sqltcp.pdb": ok
    MSG: check file "Support/Mapfiles/sqltcpn.map": ok
    MSG: check file "install/WXPERL.TGZ": ok
    MSG: check file "install/wxmsw24.dll": ok
    MSG: check file "install/sdbrun.dll": ok
    MSG: check file "bin/xuser.exe": ok
    MSG: check file "pgm/sqluser73.dll": ok
    MSG: check file "pgm/sqluser76.dll": ok
    MSG: check file "symbols/xtcpupd.pdb": ok
    MSG: check file "pgm/sqltcp1.dll": ok
    MSG: check file "Support/Mapfiles/sqluser74n.map": ok
    MSG: check file "pgm/dbmcli.exe": ok
    MSG: check file "pgm/sqltcp.dll": ok
    MSG: check file "install/RESOURCES.TGZ": ok
    MSG: check file "Support/Mapfiles/dbmevtdisp.map": ok
    MSG: check file "Support/Mapfiles/sqluser73.map": ok
    MSG: check file "Support/Mapfiles/xtcpupd.map": ok
    MSG: check file "bin/sdbverify.exe": ok
    MSG: check file "bin/xsysrc.exe": ok
    MSG: check file "Support/Mapfiles/sqltcp1.map": ok
    MSG: check file "Support/Mapfiles/sqltcp2.map": ok
    MSG: check file "install/perl58.dll": ok
    MSG: check file "Support/Mapfiles/sqluser76.map": ok
    MSG: check file "bin/sdbuninst.exe": ok
    MSG: check file "pgm/regupd.exe": ok
    MSG: check file "symbols/dbmevtdisp.pdb": ok
    MSG: check file "pgm/sqlping.exe": ok
    MSG: check file "bin/sdbpack.exe": ok
    MSG: check file "symbols/sqltcp2.pdb": ok
    MSG: check file "pgm/sqltcpn.dll": ok
    MSG: check file "pgm/sqluser72.dll": ok
    MSG: check file "symbols/sqluser74.pdb": ok
    MSG: check file "Support/Mapfiles/dbmcli.map": ok
    MSG: check file "pgm/sqltcp2.dll": ok
    MSG: check file "bin/dbmevtdisp.exe": ok
    MSG: check file "bin/sdbregview.exe": ok
    MSG: check file "bin/xtcpupd.exe": ok
    MSG: check file "install/Grid.dll": ok
    MSG: check file "bin/sdbconfig.exe": ok
    MSG: check file "symbols/sqluser74n.pdb": ok
    MSG: check file "bin/sdbreg.exe": ok
    MSG: check file "install/Wx.dll": ok
    MSG: check file "bin/sqlcli.exe": ok
    STDOUT: ok
    STDOUT: checking system libraries...MSG: update test sytem file "C:/WINDOWS/system32/mfc70.dll"
    MSG: system file "mfc70.dll" inside archive has version 7.00.9466.0
    MSG: installed system file "mfc70.dll" is up to date (version 7.00.9466.0)
    MSG: update test sytem file "C:/WINDOWS/system32/mfc70u.dll"
    MSG: system file "mfc70u.dll" inside archive has version 7.00.9466.0
    MSG: installed system file "mfc70u.dll" is up to date (version 7.00.9466.0)
    MSG: update test sytem file "C:/WINDOWS/system32/mfc71.dll"
    MSG: system file "mfc71.dll" inside archive has version 7.10.3077.0
    MSG: installed system file "mfc71.dll" is up to date (version 7.10.3077.0)
    MSG: update test sytem file "C:/WINDOWS/system32/mfc71u.dll"
    MSG: system file "mfc71u.dll" inside archive has version 7.10.3077.0
    MSG: installed system file "mfc71u.dll" is up to date (version 7.10.3077.0)
    MSG: update test sytem file "C:/WINDOWS/system32/msvcr70.dll"
    MSG: system file "msvcr70.dll" inside archive has version 7.00.9466.0
    MSG: installed system file "msvcr70.dll" is up to date (version 7.00.9466.0)
    MSG: update test sytem file "C:/WINDOWS/system32/msvcr71.dll"
    MSG: system file "msvcr71.dll" inside archive has version 7.10.3052.4
    MSG: installed system file "msvcr71.dll" is up to date (version 7.10.3052.4)
    STDOUT:  ok
    SYS: "C:Program Filessdbprograms insdbconfig.exe" "IndepPrograms=C:Program Filessdbprograms"
    SYS: "C:Program Filessdbprograms insdbconfig.exe" "IndepData=C:Documents and SettingsAll UsersApplication Datasdbdata"
    STDOUT: system path updated successfully
    STDOUT: please reboot your system after installation to take effect changes
    MSG: registry subkey "SOFTWAREMicrosoft" exist
    MSG: registry subkey "SOFTWAREMicrosoftWindows" exist
    MSG: registry subkey "SOFTWAREMicrosoftWindowsCurrentVersion" exist
    MSG: registry subkey "SOFTWAREMicrosoftWindowsCurrentVersionUninstall" exist
    MSG: created registry subkey "SOFTWAREMicrosoftWindowsCurrentVersionUninstallSAP DB (ALL)" successfully
    ACTION: make directory "C:/Documents and Settings/All Users/Menu DÈmarrer/Programmes/MaxDB" mode "775"
    ACTION: make directory "C:/Documents and Settings/All Users/Menu DÈmarrer/Programmes/MaxDB/Command Line Tools" mode "775"
    MSG: start menu shortcuts created
    MSG: packagedata of package Base changed
    MSG: writing 2 packages
    MSG: net install registry size = 32157 bytes
    MSG: wrote install registry (36384 bytes)
    MSG: packagedata of package Server Utilities changed
    MSG: writing 3 packages
    MSG: net install registry size = 32773 bytes
    MSG: wrote install registry (37403 bytes)
    STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBUTL.TGZ"
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:53 bin/
    STDOUT: extracting: -rwxr-xr-x        65536 2008-08-15 21:52:21 bin/sdbinfo.exe
    STDOUT: extracting: -rwxr-xr-x       356352 2008-08-16 00:05:31 bin/sqlrun.dll
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/sysmon.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xbackup.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xinstinfo.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xpu.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_analys.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_cons.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_server.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_show.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_start.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_stop.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_wiz.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_wizard.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_wizstop.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_wiztrc.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:53 env/
    STDOUT: extracting: -rw-rr          122 2008-08-15 22:02:13 env/serv.use
    STDOUT: extracting: -rw-rr          245 2008-08-15 22:02:13 env/xstart.use
    STDOUT: extracting: -rw-rr          542 2008-08-15 22:02:13 env/xstop.use
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:53 etc/
    STDOUT: extracting: -rw-rr          207 2008-08-15 19:42:23 etc/VERSIONS
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:53 pgm/
    STDOUT: extracting: -rwxr-xr-x       483328 2008-08-15 20:11:45 pgm/serv.exe
    STDOUT: extracting: -rwxr-xr-x       307200 2008-08-15 20:11:09 pgm/show.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:54 Support/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:54 Support/Mapfiles/
    STDOUT: extracting: -rw-rr       839796 2008-08-15 20:11:44 Support/Mapfiles/serv.map
    STDOUT: extracting: -rw-rr       540173 2008-08-15 20:11:08 Support/Mapfiles/show.map
    STDOUT: extracting: -rw-rr       615852 2008-08-16 00:05:31 Support/Mapfiles/sqlrun.map
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:55 symbols/
    STDOUT: extracting: -rw-rr      2575360 2008-08-15 20:11:44 symbols/serv.pdb
    STDOUT: extracting: -rw-rr      2051072 2008-08-15 20:11:08 symbols/show.pdb
    STDOUT: extracting: -rw-rr      2075648 2008-08-16 00:05:31 symbols/sqlrun.pdb
    STDOUT: checking unpacked archive... MSG: check file "bin/x_wizstop.exe": ok
    MSG: check file "bin/x_analys.exe": ok
    MSG: check file "bin/x_cons.exe": ok
    MSG: check file "bin/xpu.exe": ok
    MSG: check file "bin/sysmon.exe": ok
    MSG: check file "bin/x_start.exe": ok
    MSG: check file "pgm/serv.exe": ok
    MSG: check file "env/xstart.use": ok
    MSG: check file "bin/x_server.exe": ok
    MSG: check file "bin/sqlrun.dll": ok
    MSG: check file "etc/VERSIONS": ok
    MSG: check file "bin/x_wiz.exe": ok
    MSG: check file "bin/xbackup.exe": ok
    MSG: check file "Support/Mapfiles/sqlrun.map": ok
    MSG: check file "symbols/show.pdb": ok
    MSG: check file "bin/x_show.exe": ok
    MSG: check file "symbols/sqlrun.pdb": ok
    MSG: check file "env/serv.use": ok
    MSG: check file "env/xstop.use": ok
    MSG: check file "symbols/serv.pdb": ok
    MSG: check file "pgm/show.exe": ok
    MSG: check file "bin/x_wizard.exe": ok
    MSG: check file "bin/sdbinfo.exe": ok
    MSG: check file "bin/xinstinfo.exe": ok
    MSG: check file "bin/x_wiztrc.exe": ok
    MSG: check file "Support/Mapfiles/show.map": ok
    MSG: check file "Support/Mapfiles/serv.map": ok
    MSG: check file "bin/x_stop.exe": ok
    STDOUT: ok
    SYS: "c:program filessdbprograms inx_server.exe" install: 19712 INFO: Service 'XServer' is already installed
    SYS: "c:program filessdbprograms inx_server.exe" remove: 19710 INFO: Service 'XServer' removed successfully
    SYS: "c:program filessdbprograms inx_server.exe" install: 19709 INFO: Service 'XServer' installed successfully
    MSG: SYSTEM PATH is up to date
    MSG: packagedata of package Server Utilities changed
    MSG: writing 3 packages
    MSG: net install registry size = 39793 bytes
    MSG: wrote install registry (45406 bytes)
    MSG: packagedata of package Database Kernel changed
    MSG: writing 3 packages
    MSG: net install registry size = 39793 bytes
    MSG: wrote install registry (45405 bytes)
    MSG: no function "register" in package Database Kernel
    MSG: set function reference "unregister" in package Database Kernel
    MSG: set function reference "preuninstall" in package Database Kernel
    MSG: set function reference "postuninstall" in package Database Kernel
    MSG: no function "verify" in package Database Kernel
    STDOUT: unregister Database Kernel 7.6.5.9
    WRN: cannot execute command: xregcomp -u "c:program filessdbmaxdb1pgmdbpinstall": cannot create process, Le fichier spÈcifiÈ est introuvable.
    WRN: cannot execute command: xregcomp -u "c:program filessdbprogramsliblivecachedbg": cannot create process, Le fichier spÈcifiÈ est introuvable.
    SYS: dbmcli -R "c:program filessdbmaxdb1" inst_unreg : Error! Connection failed to node (local) for database (no dbname):
    SYS: dbmcli -R "c:program filessdbmaxdb1" inst_unreg : dbmsrv executable not found
    STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBKRN.TGZ"
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:15 bin/
    STDOUT: extracting: -rwxr-xr-x       274432 2008-08-15 21:51:01 bin/backint.exe
    STDOUT: extracting: -rwxr-xr-x       802816 2008-08-15 21:53:13 bin/dbmevtdisp.exe
    STDOUT: extracting: -rwxr-xr-x       552960 2008-08-15 21:53:27 bin/dbmevthndl_display.exe
    STDOUT: extracting: -rwxr-xr-x       569344 2008-08-15 21:53:37 bin/dbmevthndl_winlog.exe
    STDOUT: extracting: -rwxr-xr-x       290816 2008-08-15 21:48:43 bin/dbmsrvctl.exe
    STDOUT: extracting: -rwxr-xr-x        41705 2008-08-15 19:51:15 bin/ireport.py
    STDOUT: extracting: -rwxr-xr-x       245760 2008-08-15 21:52:11 bin/pipe2file.exe
    STDOUT: extracting: -rwxr-xr-x      1232896 2008-08-15 21:51:09 bin/sdbfill.exe
    STDOUT: extracting: -rwxr-xr-x       356352 2008-08-16 00:05:31 bin/sqlrun.dll
    STDOUT: extracting: -rwxr-xr-x        53248 2008-08-15 19:55:01 bin/sqlver.exe
    STDOUT: extracting: -rwxr-xr-x        53248 2008-08-15 19:55:01 bin/sqlwhat.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xkernprot.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xservice.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xtracesort.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_diagnose.exe
    STDOUT: extracting: -rwxr-xr-x       331776 2008-08-15 21:53:55 bin/x_python.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:07 cluster/
    STDOUT: extracting: -rwxr-xr-x      2121728 2008-08-15 20:24:13 cluster/dbmsrv_clu.exe
    STDOUT: extracting: -rwxr-xr-x        81920 2008-08-15 20:12:33 cluster/SAPDBMSCSEx.dll
    STDOUT: extracting: -rwxr-xr-x       122880 2008-08-15 20:12:43 cluster/sapdbmscsman.dll
    STDOUT: extracting: -rwxr-xr-x        77824 2008-08-15 20:12:07 cluster/SAPDBMSCSMan.exe
    STDOUT: extracting: -rwxr-xr-x        57344 2008-08-15 20:12:01 cluster/SAPDBMSCSRes.dll
    STDOUT: extracting: -rwxr-xr-x       307200 2008-08-15 20:12:57 cluster/service_clu.exe
    STDOUT: extracting: -rwxr-xr-x       499712 2008-08-15 20:12:55 cluster/serv_clu.exe
    STDOUT: extracting: -rwxr-xr-x       339968 2008-08-15 20:12:53 cluster/stop_clu.exe
    STDOUT: extracting: -rwxr-xr-x       339968 2008-08-15 20:12:51 cluster/strt_clu.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:07 demo/
    STDOUT: extracting: -rw-rr      3110911 2008-08-15 19:51:15 demo/HOTEL.py
    STDOUT: extracting: -rwxr-xr-x          367 2008-08-15 19:51:15 demo/ltutorial.py
    STDOUT: extracting: -rw-rr        11333 2008-08-15 19:51:15 demo/tutoriallib.py
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:17 doc/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:19 doc/FirstSteps/
    STDOUT: extracting: -rw-rr         3455 2008-08-15 19:51:15 doc/FirstSteps/index.html
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:18 doc/FirstSteps/Java/
    STDOUT: extracting: -rw-rr         1019 2008-08-15 19:51:15 doc/FirstSteps/Java/DemodbData.class
    STDOUT: extracting: -rw-rr         1536 2008-08-15 19:51:15 doc/FirstSteps/Java/DemodbData.java
    STDOUT: extracting: -rw-rr         1599 2008-08-15 19:51:15 doc/FirstSteps/Java/HelloMaxDB.class
    STDOUT: extracting: -rw-rr         1459 2008-08-15 19:51:15 doc/FirstSteps/Java/HelloMaxDB.java
    STDOUT: extracting: -rw-rr         1959 2008-08-15 19:51:15 doc/FirstSteps/Java/HowToJava.html
    STDOUT: extracting: -rw-rr         1305 2008-08-15 19:51:15 doc/FirstSteps/Java/StateMaxDB.class
    STDOUT: extracting: -rw-rr         1064 2008-08-15 19:51:15 doc/FirstSteps/Java/StateMaxDB.java
    STDOUT: extracting: -rw-rr          227 2008-08-15 19:51:15 doc/FirstSteps/maxdbenv.cmd
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:18 doc/FirstSteps/ODBC/
    STDOUT: extracting: -rw-rr         4510 2008-08-15 19:51:15 doc/FirstSteps/ODBC/HelloMaxDB.c
    STDOUT: extracting: -rw-rr         1293 2008-08-15 19:51:15 doc/FirstSteps/ODBC/HowToODBC.html
    STDOUT: extracting: -rw-rr          393 2008-08-15 19:51:15 doc/FirstSteps/ODBC/Makefile
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:18 doc/FirstSteps/Perl/
    STDOUT: extracting: -rw-rr          973 2008-08-15 19:51:15 doc/FirstSteps/Perl/demodbData.pm
    STDOUT: extracting: -rw-rr         1894 2008-08-15 19:51:15 doc/FirstSteps/Perl/HowToPerl.html
    STDOUT: extracting: -rwxr-xr-x          960 2008-08-15 19:51:15 doc/FirstSteps/Perl/StateMaxDB.pl
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:19 doc/FirstSteps/Python/
    STDOUT: extracting: -rw-rr          871 2008-08-15 19:51:15 doc/FirstSteps/Python/demodbData.py
    STDOUT: extracting: -rwxr-xr-x          859 2008-08-15 19:51:15 doc/FirstSteps/Python/HelloMaxDB-API.py
    STDOUT: extracting: -rwxr-xr-x          859 2008-08-15 19:51:15 doc/FirstSteps/Python/HelloMaxDB.py
    STDOUT: extracting: -rw-rr         3043 2008-08-15 19:51:15 doc/FirstSteps/Python/HowToPython.html
    STDOUT: extracting: -rwxr-xr-x          865 2008-08-15 19:51:15 doc/FirstSteps/Python/StateMaxDB.py
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:20 doc/FirstSteps/SQLDBC/
    STDOUT: extracting: -rw-rr         3522 2008-08-15 19:51:15 doc/FirstSteps/SQLDBC/HelloMaxDB.cpp
    STDOUT: extracting: -rw-rr         1329 2008-08-15 19:51:15 doc/FirstSteps/SQLDBC/HowToSQLDBC.html
    STDOUT: extracting: -rw-rr          563 2008-08-15 19:51:15 doc/FirstSteps/SQLDBC/Makefile
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:10 env/
    STDOUT: extracting: -rwxr-xr-x         6260 2008-08-15 21:53:37 env/APPS.py
    STDOUT: extracting: -rw-rr         3800 2008-08-15 21:53:37 env/CNR3DATA.py
    STDOUT: extracting: -rw-rr         8216 2008-08-15 21:53:37 env/CNR3TAB.py
    STDOUT: extracting: -rw-rr       201779 2008-08-15 22:02:13 env/cserv.pcf
    STDOUT: extracting: -rw-rr         1861 2008-08-15 21:53:37 env/DBANA.py
    STDOUT: extracting: -rw-rr        17874 2008-08-15 21:53:39 env/DBMVIEWS.py
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:08 env/en/
    STDOUT: extracting: -rw-rr         7609 2008-08-15 22:02:13 env/en/DBM.en
    STDOUT: extracting: -rw-rr        15713 2008-08-15 21:53:39 env/GARBAGE.py
    STDOUT: extracting: -rw-rr          249 2008-08-15 22:02:13 env/general.use
    STDOUT: extracting: -rwxr-xr-x         1304 2008-08-15 21:53:45 env/getpackages.py
    STDOUT: extracting: -rw-rr         1144 2008-08-15 21:53:39 env/INFO.py
    STDOUT: extracting: -rw-rr        14609 2008-08-15 21:53:45 env/installib.py
    STDOUT: extracting: -rw-rr        90473 2008-08-15 21:53:39 env/JDBC.py
    STDOUT: extracting: -rw-rr          396 2008-08-15 22:02:13 env/kernprot.use
    STDOUT: extracting: -rwxr-xr-x          949 2008-08-15 21:53:45 env/lapps.py
    STDOUT: extracting: -rw-rr         8269 2008-08-15 19:51:15 env/lsystab.py
    STDOUT: extracting: -rw-rr        19514 2008-08-15 21:53:39 env/ODBC.py
    STDOUT: extracting: -rw-rr         1241 2008-08-15 21:53:39 env/ORADD.py
    STDOUT: extracting: -rw-rr       266421 2008-08-15 21:53:41 env/ORADDCOM.py
    STDOUT: extracting: -rw-rr         9586 2008-08-15 21:53:41 env/ORADDSYN.py
    STDOUT: extracting: -rw-rr       158400 2008-08-15 21:53:41 env/ORADDV.py
    STDOUT: extracting: -rw-rr         1400 2008-08-15 21:53:41 env/PRECOM.py
    STDOUT: extracting: -rw-rr        50345 2008-08-15 21:53:45 env/REPOSITORY.py
    STDOUT: extracting: -rw-rr        61439 2008-08-15 21:53:39 env/SAPDBLOADER.py
    STDOUT: extracting: -rw-rr         4483 2008-08-15 21:53:41 env/SHOWCMD.py
    STDOUT: extracting: -rw-rr        49869 2008-08-15 21:53:41 env/SQLDBC.py
    STDOUT: extracting: -rw-rr        48352 2008-08-15 21:53:41 env/SYSDBA.py
    STDOUT: extracting: -rw-rr        59678 2008-08-15 21:53:43 env/SYSDBACOM.py
    STDOUT: extracting: -rw-rr        16770 2008-08-15 21:53:43 env/SYSINFO.py
    STDOUT: extracting: -rw-rr       114665 2008-08-15 21:53:43 env/SYSINFOCOM.py
    STDOUT: extracting: -rw-rr        17793 2008-08-15 21:53:43 env/TRIGGER.py
    STDOUT: extracting: -rw-rr         3203 2008-08-15 21:53:43 env/UDE.py
    STDOUT: extracting: -rw-rr         6596 2008-08-15 21:53:45 env/WA.py
    STDOUT: extracting: -rw-rr        54914 2008-08-15 21:53:43 env/XDD.py
    STDOUT: extracting: -rw-rr       106448 2008-08-15 21:53:43 env/XDDCOM.py
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:11 lib/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:11 lib/python2.3/
    STDOUT: extracting: -rw-rr         6867 2008-08-15 19:51:15 lib/python2.3/optlib.py
    STDOUT: extracting: -rwxr-xr-x       135234 2008-08-15 19:51:15 lib/python2.3/pyexpat.pyd
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:11 lib/python2.3/sdb/
    STDOUT: extracting: -rw-rr        14852 2008-08-15 19:51:15 lib/python2.3/sdb/dbapi.py
    STDOUT: extracting: -rwxr-xr-x       507904 2008-08-15 21:54:03 lib/python2.3/sdb/dbm.pyd
    STDOUT: extracting: -rwxr-xr-x       487424 2008-08-15 21:54:07 lib/python2.3/sdb/loader.pyd
    STDOUT: extracting: -rwxr-xr-x       475136 2008-08-15 21:54:15 lib/python2.3/sdb/sql.pyd
    STDOUT: extracting: -rw-rr          208 2008-08-15 19:51:15 lib/python2.3/sdb/__init__.py
    STDOUT: extracting: -rwxr-xr-x        61503 2008-08-15 19:51:15 lib/python2.3/zlib.pyd
    STDOUT: extracting: -rwxr-xr-x        49218 2008-08-15 19:51:15 lib/python2.3/_socket.pyd
    STDOUT: extracting: -rwxr-xr-x        57407 2008-08-15 19:51:15 lib/python2.3/_sre.pyd
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:11 misc/
    STDOUT: extracting: -rw-rr         2437 2008-08-16 00:38:45 misc/create_demo_db.cmd
    STDOUT: extracting: -rw-rr          417 2008-08-16 00:38:45 misc/drop_demo_db.cmd
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:17 pgm/
    STDOUT: extracting: -rwxr-xr-x       200704 2008-08-15 21:52:15 pgm/backup.exe
    STDOUT: extracting: -rwxr-xr-x       380928 2008-08-15 20:10:53 pgm/cons.exe
    STDOUT: extracting: -rwxr-xr-x        45056 2008-08-15 20:10:33 pgm/cr_param.exe
    STDOUT: extracting: -rwxr-xr-x       940032 2008-08-15 19:51:15 pgm/dbghelp.dll
    STDOUT: extracting: -rwxr-xr-x       299008 2008-08-15 21:49:01 pgm/dbmreg.exe
    STDOUT: extracting: -rwxr-xr-x       454656 2008-08-15 21:49:37 pgm/dbmshm.exe
    STDOUT: extracting: -rwxr-xr-x      2105344 2008-08-15 21:48:31 pgm/dbmsrv.exe
    STDOUT: extracting: -rwxr-xr-x      1843200 2008-08-15 21:49:17 pgm/dbmsrvscd.exe
    STDOUT: extracting: -rwxr-xr-x       299008 2008-08-15 21:48:49 pgm/dbmstart.exe
    STDOUT: extracting: -rwxr-xr-x       299008 2008-08-15 21:48:53 pgm/dbmstop.exe
    STDOUT: extracting: -rwxr-xr-x       299008 2008-08-15 21:49:05 pgm/dbmunreg.exe
    STDOUT: extracting: -rwxr-xr-x        69632 2008-08-16 00:15:35 pgm/dbpinstall.dll
    STDOUT: extracting: -rwxr-xr-x      1073152 2008-08-15 20:33:23 pgm/diagnose.exe
    STDOUT: extracting: -rwxr-xr-x      7258112 2008-08-15 21:48:17 pgm/kernel.exe
    STDOUT: extracting: -rwxr-xr-x       118784 2008-08-15 20:25:15 pgm/libhsscopy.dll
    STDOUT: extracting: -rwxr-xr-x      1204224 2008-08-16 00:11:25 pgm/liboms.dll
    STDOUT: extracting: -rwxr-xr-x       159744 2008-08-16 00:16:23 pgm/libsqlcls.dll
    STDOUT: extracting: -rwxr-xr-x      1191936 2008-08-16 00:17:23 pgm/libSQLDBC.dll
    STDOUT: extracting: -rwxr-xr-x      1269760 2008-08-16 00:20:23 pgm/libSQLDBC_C.dll
    STDOUT: extracting: -rwxr-xr-x      3022848 2008-08-15 22:01:27 pgm/lserver.exe
    STDOUT: extracting: -rwxr-xr-x        20545 2008-08-15 19:51:15 pgm/pysapdb.exe
    STDOUT: extracting: -rwxr-xr-x       974915 2008-08-15 19:51:15 pgm/python23.dll
    STDOUT: extracting: -rw-rr      2071185 2008-08-15 19:51:15 pgm/python23.zip
    STDOUT: extracting: -rwxr-xr-x        45056 2008-08-15 20:10:31 pgm/renparam.exe
    STDOUT: extracting: -rwxr-xr-x       294912 2008-08-15 20:11:51 pgm/service.exe
    STDOUT: extracting: -rwxr-xr-x       417792 2008-08-15 20:11:55 pgm/sqlinst.dll
    STDOUT: extracting: -rwxr-xr-x      1359872 2008-08-15 20:11:59 pgm/sqlmsg.dll
    STDOUT: extracting: -rwxr-xr-x       319488 2008-08-15 20:11:01 pgm/stop.exe
    STDOUT: extracting: -rwxr-xr-x       319488 2008-08-15 20:10:57 pgm/strt.exe
    STDOUT: extracting: -rwxr-xr-x        98304 2008-08-15 22:11:33 pgm/StudioUtil.dll
    STDOUT: extracting: -rwxr-xr-x        49152 2008-08-15 20:25:11 pgm/sysrc.exe
    STDOUT: extracting: -rwxr-xr-x        73728 2008-08-15 20:11:57 pgm/systemrc.exe
    STDOUT: extracting: -rwxr-xr-x       229376 2008-08-15 22:11:43 pgm/TableDefC.dll
    STDOUT: extracting: -rwxr-xr-x        45056 2008-08-15 21:53:29 pgm/Tools_WinEvtLog.dll
    STDOUT: extracting: -rwxr-xr-x        73728 2008-08-15 22:01:47 pgm/tracesort.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:17 sap/
    STDOUT: extracting: -rw-rr          147 2008-08-15 19:51:15 sap/dbpinstall.lst
    STDOUT: extracting: -rw-rr          761 2008-08-15 21:50:29 sap/grantxdb.dbm
    STDOUT: extracting: -rwxr-xr-x        18192 2008-08-15 19:51:15 sap/lcinit.bat
    STDOUT: extracting: -rwxr-xr-x       126976 2008-08-16 00:15:27 sap/lvcbench.dll
    STDOUT: extracting: -rw-rr           89 2008-08-15 19:51:15 sap/saprfc.ini
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:44 pgm/
    STDOUT: extracting: -rwxr-xr-x     14577664 2008-08-15 23:36:03 pgm/slowknl.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:45 Support/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:57 Support/Mapfiles/
    STDOUT: extracting: -rw-rr       505962 2008-08-15 21:51:00 Support/Mapfiles/backint.map
    STDOUT: extracting: -rw-rr       661472 2008-08-15 20:10:53 Support/Mapfiles/cons.map
    STDOUT: extracting: -rw-rr       121797 2008-08-15 20:10:32 Support/Mapfiles/cr_param.map
    STDOUT: extracting: -rw-rr      1265024 2008-08-15 21:53:13 Support/Mapfiles/dbmevtdisp.map
    STDOUT: extracting: -rw-rr       913124 2008-08-15 21:53:26 Support/Mapfiles/dbmevthndl_display.map
    STDOUT: extracting: -rw-rr       918119 2008-08-15 21:53:36 Support/Mapfiles/dbmevthndl_winlog.map
    STDOUT: extracting: -rw-rr       802618 2008-08-15 21:49:36 Support/Mapfiles/dbmshm.map
    STDOUT: extracting: -rw-rr      3115022 2008-08-15 20:24:12 Support/Mapfiles/dbmsrv-clu.map
    STDOUT: extracting: -rw-rr      3049582 2008-08-15 21:48:31 Support/Mapfiles/dbmsrv.map
    STDOUT: extracting: -rw-rr      2607026 2008-08-15 21:49:16 Support/Mapfiles/dbmsrvscd.map
    STDOUT: extracting: -rw-rr        78229 2008-08-16 00:15:35 Support/Mapfiles/dbpinstall.map
    STDOUT: extracting: -rw-rr      1937316 2008-08-15 20:33:22 Support/Mapfiles/diagnose.map
    STDOUT: extracting: -rw-rr       155915 2008-08-15 20:10:31 Support/Mapfiles/get_page.map
    STDOUT: extracting: -rw-rr     11970292 2008-08-15 21:48:16 Support/Mapfiles/kernel.map
    STDOUT: extracting: -rw-rr       191857 2008-08-15 20:25:15 Support/Mapfiles/libhsscopy.map
    STDOUT: extracting: -rw-rr      2152785 2008-08-16 00:11:24 Support/Mapfiles/liboms.map
    STDOUT: extracting: -rw-rr       259698 2008-08-16 00:16:22 Support/Mapfiles/libsqlcls.map
    STDOUT: extracting: -rw-rr      1983758 2008-08-16 00:17:23 Support/Mapfiles/libSQLDBC.map
    STDOUT: extracting: -rw-rr      2270630 2008-08-16 00:20:22 Support/Mapfiles/libSQLDBC_C.map
    STDOUT: extracting: -rw-rr      3030264 2008-08-15 22:01:26 Support/Mapfiles/lserver.map
    STDOUT: extracting: -rw-rr       241759 2008-08-16 00:15:26 Support/Mapfiles/lvcbench.map
    STDOUT: extracting: -rw-rr        22799 2008-08-15 19:51:40 Support/Mapfiles/odbcreg.map
    STDOUT: extracting: -rw-rr       437361 2008-08-15 21:52:10 Support/Mapfiles/pipe2file.map
    STDOUT: extracting: -rw-rr       170094 2008-08-15 20:12:32 Support/Mapfiles/sapdbmscsex.map
    STDOUT: extracting: -rw-rr       260595 2008-08-15 20:12:42 Support/Mapfiles/sapdbmscsman.map
    STDOUT: extracting: -rw-rr       130593 2008-08-15 20:12:01 Support/Mapfiles/sapdbmscsres.map
    STDOUT: extracting: -rw-rr       864387 2008-08-15 20:12:55 Support/Mapfiles/serv-clu.map
    STDOUT: extracting: -rw-rr       573796 2008-08-15 20:12:57 Support/Mapfiles/service-clu.map
    STDOUT: extracting: -rw-rr       545676 2008-08-15 20:11:50 Support/Mapfiles/service.map
    STDOUT: extracting: -rw-rr     15115432 2008-08-15 23:36:03 Support/Mapfiles/slowknl.map
    STDOUT: extracting: -rw-rr       674679 2008-08-15 20:11:54 Support/Mapfiles/sqlinst.map
    STDOUT: extracting: -rw-rr       138012 2008-08-15 19:55:01 Support/Mapfiles/sqlver.map
    STDOUT: extracting: -rw-rr       137724 2008-08-15 19:55:00 Support/Mapfiles/sqlwhat.map
    STDOUT: extracting: -rw-rr       100215 2008-08-16 00:05:33 Support/Mapfiles/sql_run.map
    STDOUT: extracting: -rw-rr       126593 2008-08-15 20:25:11 Support/Mapfiles/sysrc.map
    STDOUT: extracting: -rw-rr       205806 2008-08-15 20:11:57 Support/Mapfiles/systemrc.map
    STDOUT: extracting: -rw-rr       329621 2008-08-15 22:11:43 Support/Mapfiles/TableDefC.map
    STDOUT: extracting: -rw-rr       180003 2008-08-15 22:01:47 Support/Mapfiles/tracesort.map
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:01:45 symbols/
    STDOUT: extracting: -rw-rr      1199104 2008-08-15 21:51:00 symbols/backint.pdb
    STDOUT: extracting: -rw-rr      2092032 2008-08-15 20:10:53 symbols/cons.pdb
    STDOUT: extracting: -rw-rr       281600 2008-08-15 20:10:32 symbols/cr_param.pdb
    STDOUT: extracting: -rw-rr      3836928 2008-08-15 21:53:13 symbols/dbmevtdisp.pdb
    STDOUT: extracting: -rw-rr      3058688 2008-08-15 21:53:26 symbols/dbmevthndl_display.pdb
    STDOUT: extracting: -rw-rr      3083264 2008-08-15 21:53:36 symbols/dbmevthndl_winlog.pdb
    STDOUT: extracting: -rw-rr      2485248 2008-08-15 21:49:36 symbols/dbmshm.pdb
    STDOUT: extracting: -rw-rr      8563712 2008-08-15 20:24:12 symbols/dbmsrv-clu.pdb
    STDOUT: extracting: -rw-rr      8391680 2008-08-15 21:48:30 symbols/dbmsrv.pdb
    STDOUT: extracting: -rw-rr      7703552 2008-08-15 21:49:15 symbols/dbmsrvscd.pdb
    STDOUT: extracting: -rw-rr       420864 2008-08-16 00:15:35 symbols/dbpinstall.pdb
    STDOUT: extracting: -rw-rr      4803584 2008-08-15 20:33:21 symbols/diagnose.pdb
    STDOUT: extracting: -rw-rr       338944 2008-08-15 20:10:31 symbols/get_page.pdb
    STDOUT: extracting: -rw-rr     36047872 2008-08-15 21:48:12 symbols/kernel.pdb
    STDOUT: extracting: -rw-rr       470016 2008-08-15 20:25:15 symbols/libhsscopy.pdb
    STDOUT: extracting: -rw-rr      5868544 2008-08-16 00:11:24 symbols/liboms.pdb
    STDOUT: extracting: -rw-rr      1264640 2008-08-16 00:16:21 symbols/libsqlcls.pdb
    STDOUT: extracting: -rw-rr      4713472 2008-08-16 00:17:22 symbols/libSQLDBC.pdb
    STDOUT: extracting: -rw-rr      5180416 2008-08-16 00:20:21 symbols/libSQLDBC_C.pdb
    STDOUT: extracting: -rw-rr      7171072 2008-08-15 22:01:25 symbols/lserver.pdb
    STDOUT: extracting: -rw-rr       642048 2008-08-16 00:15:26 symbols/lvcbench.pdb
    STDOUT: extracting: -rw-rr      1207296 2008-08-15 21:52:10 symbols/pipe2file.pdb
    STDOUT: extracting: -rw-rr      3058688 2008-08-15 20:12:32 symbols/sapdbmscsex.pdb
    STDOUT: extracting: -rw-rr      1002496 2008-08-15 20:12:42 symbols/sapdbmscsman.pdb
    STDOUT: extracting: -rw-rr       330752 2008-08-15 20:12:01 symbols/sapdbmscsres.pdb
    STDOUT: extracting: -rw-rr      2739200 2008-08-15 20:12:55 symbols/serv-clu.pdb
    STDOUT: extracting: -rw-rr      2141184 2008-08-15 20:12:56 symbols/service-clu.pdb
    STDOUT: extracting: -rw-rr      1944576 2008-08-15 20:11:50 symbols/service.pdb
    STDOUT: extracting: -rw-rr     40643584 2008-08-15 23:35:57 symbols/slowknl.pdb
    STDOUT: extracting: -rw-rr      2321408 2008-08-15 20:11:54 symbols/sqlinst.pdb
    STDOUT: extracting: -rw-rr      2075648 2008-08-16 00:05:31 symbols/sqlrun.pdb
    STDOUT: extracting: -rw-rr       306176 2008-08-15 19:55:01 symbols/sqlver.pdb
    STDOUT: extracting: -rw-rr       306176 2008-08-15 19:55:00 symbols/sqlwhat.pdb
    STDOUT: extracting: -rw-rr       248832 2008-08-16 00:05:33 symbols/sql_run.pdb
    STDOUT: extracting: -rw-rr      2214912 2008-08-15 20:12:51 symbols/start-clu.pdb
    STDOUT: extracting: -rw-rr      2206720 2008-08-15 20:12:52 symbols/stop-clu.pdb
    STDOUT: extracting: -rw-rr       306176 2008-08-15 20:25:10 symbols/sysrc.pdb
    STDOUT: extracting: -rw-rr       388096 2008-08-15 20:11:57 symbols/systemrc.pdb
    STDOUT: extracting: -rw-rr       846848 2008-08-15 22:11:43 symbols/TableDefC.pdb
    STDOUT: extracting: -rw-rr       887808 2008-08-15 22:01:47 symbols/tracesort.pdb
    STDOUT: checking unpacked archive... MSG: check file "Support/Mapfiles/diagnose.map": ok
    MSG: check file "doc/FirstSteps/ODBC/HowToODBC.html": ok
    MSG: check file "lib/python2.3/_socket.pyd": ok
    MSG: check file "Support/Mapfiles/get_page.map": ok
    MSG: check file "pgm/dbmsrv.exe": ok
    MSG: check file "env/INFO.py": ok
    MSG: check file "symbols/dbmsrv-clu.pdb": ok
    MSG: check file "pgm/diagnose.exe": ok
    MSG: check file "symbols/cons.pdb": ok
    MSG: check file "misc/create_demo_db.cmd": ok
    MSG: check file "symbols/sapdbmscsres.pdb": ok
    MSG: check file "symbols/cr_param.pdb": ok
    MSG: check file "Support/Mapfiles/dbpinstall.map": ok
    MSG: check file "lib/python2.3/sdb/__init__.py": ok
    MSG: check file "symbols/dbmevthndl_winlog.pdb": ok
    MSG: check file "symbols/libSQLDBC_C.pdb": ok
    MSG: check file "bin/xtracesort.exe": ok
    MSG: check file "bin/x_diagnose.exe": ok
    MSG: check file "symbols/pipe2file.pdb": ok
    MSG: check file "pgm/Tools_WinEvtLog.dll": ok
    MSG: check file "symbols/dbmshm.pdb": ok
    MSG: check file "pgm/cons.exe": ok
    MSG: check file "sap/grantxdb.dbm": ok
    MSG: check file "demo/tutoriallib.py": ok
    MSG: check file "demo/HOTEL.py": ok
    MSG: check file "symbols/liboms.pdb": ok
    MSG: check file "env/cserv.pcf": ok
    MSG: check file "Support/Mapfiles/TableDefC.map": ok
    MSG: check file "lib/python2.3/_sre.pyd": ok
    MSG: check file "pgm/service.exe": ok
    MSG: check file "doc/FirstSteps/Python/HowToPython.html": ok
    MSG: check file "doc/FirstSteps/ODBC/HelloMaxDB.c": ok
    MSG: check file "Support/Mapfiles/libSQLDBC.map": ok
    MSG: check file "doc/FirstSteps/Java/DemodbData.java": ok
    MSG: check file "sap/saprfc.ini": ok
    MSG: check file "pgm/dbghelp.dll": ok
    MSG: check file "cluster/strt_clu.exe": ok
    MSG: check file "symbols/libhsscopy.pdb": ok
    MSG: check file "symbols/dbmsrv.pdb": ok
    MSG: check file "symbols/sapdbmscsman.pdb": ok
    MSG: check file "cluster/SAPDBMSCSMan.exe": ok
    MSG: check file "pgm/tracesort.exe": ok
    MSG: check file "Support/Mapfiles/sqlinst.map": ok
    MSG: check file "bin/sqlwhat.exe": ok
    MSG: check file "lib/python2.3/pyexpat.pyd": ok
    MSG: check file "pgm/libSQLDBC_C.dll": ok
    MSG: check file "Support/Mapfiles/sapdbmscsman.map": ok
    MSG: check file "Support/Mapfiles/sapdbmscsres.map": ok
    MSG: check file "Support/Mapfiles/dbmevthndl_winlog.map": ok
    MSG: check file "bin/x_python.exe": ok
    MSG: check file "symbols/sql_run.pdb": ok
    MSG: check file "pgm/python23.dll": ok
    MSG: check file "env/SQLDBC.py": ok
    MSG: check file "symbols/tracesort.pdb": ok
    MSG: check file "cluster/SAPDBMSCSRes.dll": ok
    MSG: check file "cluster/stop_clu.exe": ok
    MSG: check file "pgm/sqlinst.dll": ok
    MSG: check file "pgm/StudioUtil.dll": ok
    MSG: check file "Support/Mapfiles/slowknl.map": ok
    MSG: check file "doc/FirstSteps/Python/HelloMaxDB.py": ok
    MSG: check file "symbols/lserver.pdb": ok
    MSG: check file "Support/Mapfiles/serv-clu.map": ok
    MSG: check file "pgm/cr_param.exe": ok
    MSG: check file "bin/backint.exe": ok
    MSG: check file "bin/sqlrun.dll": ok
    MSG: check file "pgm/libSQLDBC.dll": ok
    MSG: check file "Support/Mapfiles/kernel.map": ok
    MSG: check file "symbols/kernel.pdb": ok
    MSG: check file "bin/dbmsrvctl.exe": ok
    MSG: check file "env/UDE.py": ok
    MSG: check file "symbols/dbmsrvscd.pdb": ok
    MSG: check file "symbols/sqlinst.pdb": ok
    MSG: check file "doc/FirstSteps/Java/DemodbData.class": ok
    MSG: check file "env/lsystab.py": ok
    MSG: check file "sap/lcinit.bat": ok
    MSG: check file "lib/python2.3/zlib.pyd": ok
    MSG: check file "doc/FirstSteps/Perl/StateMaxDB.pl": ok
    MSG: check file "pgm/python23.zip": ok
    MSG: check file "doc/FirstSteps/Java/HelloMaxDB.class": ok
    MSG: check file "symbols/dbmevtdisp.pdb": ok
    MSG: check file "env/installib.py": ok
    MSG: check file "pgm/renparam.exe": ok
    MSG: check file "doc/FirstSteps/Python/StateMaxDB.py": ok
    MSG: check file "env/TRIGGER.py": ok
    MSG: check file "pgm/libhsscopy.dll": ok
    MSG: check file "symbols/serv-clu.pdb": ok
    MSG: check file "pgm/systemrc.exe": ok
    MSG: check file "pgm/dbmunreg.exe": ok
    MSG: check file "Support/Mapfiles/sysrc.map": ok
    MSG: check file "Support/Mapfiles/libhsscopy.map": ok
    MSG: check file "bin/dbmevtdisp.exe": ok
    MSG: check file "doc/FirstSteps/ODBC/Makefile": ok
    MSG: check file "Support/Mapfiles/dbmsrv-clu.map": ok
    MSG: check file "pgm/stop.exe": ok
    MSG: check file "Support/Mapfiles/service-clu.map": ok
    MSG: check file "Support/Mapfiles/lserver.map": ok
    MSG: check file "Support/Mapfiles/libsqlcls.map": ok
    MSG: check file "symbols/backint.pdb": ok
    MSG: check file "Support/Mapfiles/systemrc.map": ok
    MSG: check file "symbols/get_page.pdb": ok
    MSG: check file "lib/python2.3/sdb/sql.pyd": ok
    MSG: check file "Support/Mapfiles/dbmsrv.map": ok
    MSG: check file "env/APPS.py": ok
    MSG: check file "env/kernprot.use": ok
    MSG: check file "Support/Mapfiles/lvcbench.map": ok
    MSG: check file "symbols/systemrc.pdb": ok
    MSG: check file "symbols/sqlver.pdb": ok
    MSG: check file "pgm/liboms.dll": ok
    MSG: check file "cluster/service_clu.exe": ok
    MSG: check file "env/ORADDSYN.py": ok
    MSG: check file "Support/Mapfiles/backint.map": ok
    MSG: check file "env/SYSINFOCOM.py": ok
    MSG: check file "Support/Mapfiles/dbmevthndl_display.map": ok
    MSG: check file "cluster/SAPDBMSCSEx.dll": ok
    MSG: check file "pgm/slowknl.exe": ok
    MSG: check file "symbols/slowknl.pdb": ok
    MSG: check file "symbols/sqlwhat.pdb": ok
    MSG: check file "symbols/TableDefC.pdb": ok
    MSG: check file "doc/FirstSteps/SQLDBC/HelloMaxDB.cpp": ok
    MSG: check file "env/CNR3DATA.py": ok
    MSG: check file "doc/FirstSteps/index.html": ok
    MSG: check file "doc/FirstSteps/Java/HowToJava.html": ok
    MSG: check file "bin/pipe2file.exe": ok
    MSG: check file "doc/FirstSteps/Perl/demodbData.pm": ok
    MSG: check file "bin/dbmevthndl_winlog.exe": ok
    MSG: check file "Support/Mapfiles/tracesort.map": ok
    MSG: check file "symbols/lvcbench.pdb": ok
    MSG: check file "demo/ltutorial.py": ok
    MSG: check file "symbols/sapdbmscsex.pdb": ok
    MSG: check file "bin/xservice.exe": ok
    MSG: check file "doc/FirstSteps/Python/HelloMaxDB-API.py": ok
    MSG: check file "symbols/libSQLDBC.pdb": ok
    MSG: check file "env/REPOSITORY.py": ok
    MSG: check file "Support/Mapfiles/cr_param.map": ok
    MSG: check file "lib/python2.3/optlib.py": ok
    MSG: check file "cluster/serv_clu.exe": ok
    MSG: check file "symbols/sysrc.pdb": ok
    MSG: check file "env/ORADDCOM.py": ok
    MSG: check file "doc/FirstSteps/SQLDBC/Makefile": ok
    MSG: check file "pgm/dbmsrvscd.exe": ok
    MSG: check file "symbols/diagnose.pdb": ok
    MSG: check file "pgm/TableDefC.dll": ok
    MSG: check file "doc/FirstSteps/Perl/HowToPerl.html": ok
    MSG: check file "Support/Mapfiles/sqlwhat.map": ok
    MSG: check file "symbols/stop-clu.pdb": ok
    MSG: check file "cluster/dbmsrv_clu.exe": ok
    MSG: check file "pgm/sysrc.exe": ok
    MSG: check file "pgm/kernel.exe": ok
    MSG: check file "Support/Mapfiles/sql_run.map": ok
    MSG: check file "doc/FirstSteps/Java/StateMaxDB.class": ok
    MSG: check file "Support/Mapfiles/dbmsrvscd.map": ok
    MSG: check file "symbols/service-clu.pdb": ok
    MSG: check file "symbols/dbmevthndl_display.pdb": ok
    MSG: check file "Support/Mapfiles/odbcreg.map": ok
    MSG: check file "env/SAPDBLOADER.py": ok
    MSG: check file "bin/sqlver.exe": ok
    MSG: check file "env/general.use": ok
    MSG: check file "sap/dbpinstall.lst": ok
    MSG: check file "pgm/dbpinstall.dll": ok
    MSG: check file "doc/FirstSteps/Java/StateMaxDB.java": ok
    MSG: check file "env/en/DBM.en": ok
    MSG: check file "sap/lvcbench.dll": ok
    MSG: check file "pgm/lserver.exe": ok
    MSG: check file "env/getpackages.py": ok
    MSG: check file "env/lapps.py": ok
    MSG: check file "Support/Mapfiles/dbmshm.map": ok
    MSG: check file "Support/Mapfiles/service.map": ok
    MSG: check file "misc/drop_demo_db.cmd": ok
    MSG: check file "lib/python2.3/sdb/dbm.pyd": ok
    MSG: check file "env/WA.py": ok
    MSG: check file "symbols/dbpinstall.pdb": ok
    MSG: check file "bin/ireport.py": ok
    MSG: check file "Support/Mapfiles/sapdbmscsex.map": ok
    MSG: check file "Support/Mapfiles/libSQLDBC_C.map": ok
    MSG: check file "Support/Mapfiles/liboms.map": ok
    MSG: check file "lib/python2.3/sdb/dbapi.py": ok
    MSG: check file "doc/FirstSteps/Java/HelloMaxDB.java": ok
    MSG: check file "env/ORADDV.py": ok
    MSG: check file "doc/FirstSteps/maxdbenv.cmd": ok
    MSG: check file "pgm/pysapdb.exe": ok
    MSG: check file "pgm/libsqlcls.dll": ok
    MSG: check file "env/GARBAGE.py": ok
    MSG: check file "symbols/libsqlcls.pdb": ok
    MSG: check file "bin/xkernprot.exe": ok
    MSG: check file "Support/Mapfiles/dbmevtdisp.map": ok
    MSG: check file "env/SYSINFO.py": ok
    MSG: check file "symbols/sqlrun.pdb": ok
    MSG: check file "env/XDDCOM.py": ok
    MSG: check file "bin/sdbfill.exe": ok
    MSG: check file "lib/python2.3/sdb/loader.pyd": ok
    MSG: check file "env/XDD.py": ok
    MSG: check file "doc/FirstSteps/SQLDBC/HowToSQLDBC.html": ok
    MSG: check file "pgm/backup.exe": ok
    MSG: check file "env/ODBC.py": ok
    MSG: check file "Support/Mapfiles/pipe2file.map": ok
    MSG: check file "Support/Mapfiles/cons.map": ok
    MSG: check file "pgm/dbmshm.exe": ok
    MSG: check file "env/SYSDBA.py": ok
    MSG: check file "env/CNR3TAB.py": ok
    MSG: check file "env/ORADD.py": ok
    MSG: check file "env/PRECOM.py": ok
    MSG: check file "pgm/strt.exe": ok
    MSG: check file "cluster/sapdbmscsman.dll": ok
    MSG: check file "Support/Mapfiles/sqlver.map": ok
    MSG: check file "env/DBANA.py": ok
    MSG: check file "env/SHOWCMD.py": ok
    MSG: check file "pgm/dbmstop.exe": ok
    MSG: check file "env/SYSDBACOM.py": ok
    MSG: check file "symbols/start-clu.pdb": ok
    MSG: check file "bin/dbmevthndl_display.exe": ok
    MSG: check file "doc/FirstSteps/Python/demodbData.py": ok
    MSG: check file "pgm/dbmstart.exe": ok
    MSG: check file "env/DBMVIEWS.py": ok
    MSG: check file "env/JDBC.py": ok
    MSG: check file "pgm/sqlmsg.dll": ok
    MSG: check file "pgm/dbmreg.exe": ok
    MSG: check file "symbols/service.pdb": ok
    STDOUT: ok
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/index.html" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/Perl/HowToPerl.html" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/Python/HowToPython.html" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/ODBC/HowToODBC.html" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/Java/HowToJava.html" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/misc/create_demo_db.cmd" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/misc/drop_demo_db.cmd" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/maxdbenv.cmd" modified by installer
    SYS: "C:Program FilessdbMAXDB1 indbmsrvctl.exe" start
    SYS: "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": ERR
    SYS: "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": -24913,ERR_SERVICEDB: Cannot register service database instance for C:Program FilesSDBMAXDB1
    STDERR: error occured while executing "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1"
    STDERR: "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": ERR
    "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": -24913,ERR_SERVICEDB: Cannot register service database instance for C:Program FilesSDBMAXDB1
    STDERR: installation exited abnormally  at Fr, Jan 09, 2009 at 18:17:25
    MSG: packagedata of package Redist Python changed
    MSG: writing 4 packages
    MSG: net install registry size = 40263 bytes
    MSG: wrote install registry (46259 bytes)
    STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBRDPY.TGZ"
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:04:43 bin/
    STDOUT: extracting: -rwxr-xr-x       331776 2008-08-15 21:53:55 bin/x_python.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:04:43 lib/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:04:44 lib/python2.3/
    STDOUT: extracting: -rw-rr         6867 2008-08-15 19:51:15 lib/python2.3/optlib.py
    STDOUT: extracting: -rwxr-xr-x       135234 2008-08-15 19:51:15 lib/python2.3/pyexpat.pyd
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:04:43 lib/python2.3/sdb/
    STDOUT: extracting: -rwxr-xr-x       507904 2008-08-15 21:54:03 lib/python2.3/sdb/dbm.pyd
    STDOUT: extracti

    HI there,
    it really does look like as the "uninstallation" was done by merely deleting files from the filesystem.
    This will always lead to problems when you try to re-install a MaxDB afterwards.
    Uninstallations should be done via SDBUNIST to avoid such issues.
    Based on the error messages like:
    getRelease():C:/Program Files/SDB/MAXDB1/pgm/kernel.exe not found
    MSG: migrate server installation data for INSTROOT "c:/program files/sdb/maxdb1"
    MSG: installed package is flaged as invalid => skipping update check
    WRN: cannot execute command: xregcomp -u "c:program filessdbmaxdb1pgmdbpinstall": cannot create process, Le fichier spÈcifiÈ est introuvable.
    >WRN: cannot execute command: xregcomp -u "c:program filessdbprogramsliblivecachedbg": cannot create process, Le fichier spÈcifiÈ est introuvable.
    we can tell: the MaxDB installation registration had not been deleted correctly.
    If I'd to guess, I'd say you just deleted whatever was in the folder "c:program filessdb" and crossed fingers that this would do.
    Anyhow, on this system, due to the usage of non-SAP-standard folder layout check this one, the installation registration can by found in the all users data folder:
    >MSG: Template set indep data path to "c:/documents and settings/all users/application data/sdb/data"
    This would have to be removed as well.
    Anyhow, maybe you want to read the documentation before messing up your system by try and error:
    Installation Manual
    regards,
    Lars

Maybe you are looking for