BBC America HD Channel Not Available

I'm seeing a notice on channel 689 for BBC America HD that the channel isn't available, but I can view the SD version on 189.  Anyone else having this problem?  I used the in home agent and it didn't report any outages.

Thanks, tns.  Tried rebooting and I guess I'll have to try the dreaded reset and lose my settings.  I may wait a day or so to see if I get lucky and it fixes itself.  Appreciate you letting me know it's working for you.  Anyone on VHO 2 having problems (Florida)?

Similar Messages

  • Requested circuit/channel not available

    Hello,
    I have a problem with a PRI link. We have installed CCM 3.3(3) and a 3745 with a PRI link to the telco. The 3745 is configured as a MGCP gateway. When I try to initiate an outbound call, I get the following Q931 debug message:
    *Mar 1 01:47:14.967: ISDN Se3/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0005
    Bearer Capability i = 0x8090A3
    Standard = CCITT
    Transer Capability = Speech
    Transfer Mode = Circuit
    Transfer Rate = 64 kbit/s
    Channel ID i = 0xA9839F
    Exclusive, Channel 31
    Calling Party Number i = 0x0081, 'XXXXXXX'
    Plan:Unknown, Type:Unknown
    Called Party Number i = 0x80, 'XXXXXXXXXX'
    Plan:Unknown, Type:Unknown
    *Mar 1 01:47:15.127: ISDN Se3/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x8005
    Cause i = 0x82AC - Requested circuit/channel not available
    When I try an inbound call I get a busy signal, and a similar debug message (if I use another router to initiate that ISDN call).
    This is the "show ISDN state" screen:
    ISDN Serial3/0:15 interface
    dsl 0, interface ISDN Switchtype = primary-net5
    L2 Protocol = Q.921 L3 Protocol(s) = CCM-MANAGER
    Layer 1 Status:
    ACTIVE
    Layer 2 Status:
    TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    Layer 3 Status:
    0 Active Layer 3 Call(s)
    Active dsl 0 CCBs = 0
    The Free Channel Mask: 0xFFFF7FFF
    Number of L2 Discards = 1, L2 Session ID = 13
    So I presume there is nothing wrong with the signalization??
    I contacted the telco person, and he told be that he sees some kind of BLOCKING state on our side of the PRI link.
    Please help or give at least some guidelines what to try next!
    Thanks in advance...

    Haha, 11 years later this post save us on CUCM 8.6.2, disabled "Inhibit restarts at PRI initialization" Works Excellent on the E1 affected.
    THANKS A LOOOT.

  • TV Says Channel Not Available

    So My TV says channel not available and I called Verzion and they are not able to help me.  I pay almost $200 dollars a month for service and I get the run around.  I am about to cancel my service if someone doesnt call me back or send a tech out to find out why is it that I am calling twice in one month for the same issue.

    One of course is to make sure its a channel you are suppose to get.
    Complaining here is just complaining to your Peers.  YOu need to follow through with contacting Verizon support.  http://www22.verizon.com/content/contactus/

  • One TV keeps getting message this channel not available

    OK so one TV an older one, in my home keeps getting the message this channel not available.  I went through ll the trouble shooting steps.  My other two TVs are fine but they are new one's.  This is my grandpas' old one.

    I'm sure it happens to many channels from time to time, because that is what happens to me.  On the DVR or on the HD STB.  Tonight I sat down to watch the Yankees play the Phillies on ESPN.  My 2 favorite teams, very excited.  At first ESPN doesn't load, then I get the BSOD w/ the white letters in the middle of the screen telling me the channel is unavailable.  It provides me w/ 2 options.  Option 1 is to switch away from this channel and back again (didn't work).  Option 2 is to call the toll free number, input a code and everything will be fine. 
    So I called the toll free number, entered the codes as prompted, and listened to the robot lady while she reset my DVR.  She told me to look for the yellow light to the left of the display after the reset and if the yellow light wasn't there, to turn on the DVR using the power button on the DVR.  I did not see the yellow light, so I turned the power on as instructed by the robot lady.  However, still no yellow light.  The robot lady is only prompting me to say next, repeat the instructions for the #%&^*(*&%@!!!#%$^ yellow light, or say problem fixed.  When I took her up on her offer of more info, she simply repeated the thing about the yellow light.
    How about adding a prompt to her repertoire asking if the yellow light isn't there.... I guarantee this will be the most used prompt.
    Meanwhile, I am too experienced and sane to call for tech support, live chat is always unavailable, so I am left waiting for some verizon kool-aid-drinking "guru" to tell me my coax is bad in the forums.
    Good night.

  • Channel not available. and bad gateway

    TO add to our new fios installation woes we are now getting channel not available error on one of our boxes as well as the bad gateway error. 
    I discontected all the coax and reconeted and tried all the trouble shooting steps.. any advice?
    Thanks
    I should add this is only happening on a few channels that i can find. syfi hd is one.  ALso im not seeing this issue on our main box. 
    UPDATE: channel not available fixed by tech who installed the proper spiltters.

    Glad to hear the channel issue is fixed. We would like to help with the gateway problem. I need to get come circuit information from you. I have sent you a private message to get more information.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Comm channel not available in RWB comm channel monitoring

    Hi All,
              I've gone through this(Comm channel missing in comm channel monitoring) unanwered forum. I've facing the same issue.
    In my ID, I created XI receiver adapter comm. channel. And data is flowing successfully to the receiver side through this Comm. channel
    I'm aware that XI adapter in ID is used to send data via Proxy.
    But why i'm not see that in the Comm. channel monitoring in RWB. If anyone has documentation please let me know.
    Thanks.

    Hi ,
              The XI adapter resides in Integration engine thus you cannot see it in RWB. RWB shows comm channels which are in adapter engine. The simple proof is that you cannot enhance this adapter with your own modules on the Module tab page in the module processor.  Here is the link to documentation
    http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
    regards
    Anupam

  • Airport Extreme 5GHz Channel not available

    Hi All
    My Airport Extreme 5th Gen is now up and running.
    The issue I have is that unless I give the 5GHz channel it's own name, my MacBook Pro will not pick it up - instead opting for the 2.4GHz channel. I know that distance and obstacles are a factor but in a test situation the MacBook is only a metre away from the Airport. If I give the 5GHz channel it's own name then I can select the 5GHz network and confirm the connection rate - this also works with Windows 7 machine in the same position with the signal strength being 'excellent'. So why when I have the same name for both channels will my machines only pick up the 2.4GHz signal?
    Using two names would be okay exept that when I do this the 2.4GHz network slows completely and is unusable.
    Last week I had a pretty good setup with an old Airport Extreme and now with the new 5th Gen unit I can either connect two machines at 5GHz or four machines at 2.4GHz - not a mixture of both. So basically I'm no better off than with my eight year old Airport Extreme.
    I'm beginning to think that there is a defect with the new Airport Extreme unit - is there any simple checks I can do on the unit to confirm that it is operating correctly?
    I'd really appreciate any help with this.
    Phil

    Update: Solved. I reset the Airport Extreme a number of times in succession and finally it just worked - not sure what the problem was.

  • International channel not available on VERIZON FIOS MOBILE FOR IPAD

    I have Brazilian channel and I believe you guys as right nonw dont support watch Iternational channel yet. Do you guys now when will be available to watch the channels that we pay for on mobile ipad. I would love to watch Brazilian channel at work
    THe channel is 1768

    cesinha87 wrote:
    I have Brazilian channel and I believe you guys as right nonw dont support watch Iternational channel yet. Do you guys now when will be available to watch the channels that we pay for on mobile ipad. I would love to watch Brazilian channel at work
    THe channel is 1768
    Hello,
    At this time, one can stream about 75 live TV channels  from the iPad, Xbox 360, LG Smart TV, and Samsung Smart TV.
    From the iPad, this is through the 'FiOS Mobile' app from the App store.
    For a list of channels available for Live TV on the aforementioned devices, you can go to either:
    http://www22.verizon.com/home/livetv and select the link 'See available channels'
    OR
    http://www22.verizon.com/home/fiostv/features#connect and select the link 'your favorite TV channels'.
    Keep in mind that you have to be subscribed to the selected TV channel in your FiOS TV package in order to watch that channel live.
    Also, as PJL has mentioned, the live TV streaming would work only if connected to your residential home network. 
    Lastly, if you'd like to submit the suggestion to include international channels to live TV streaming on the iPad (and other devices), you can do so via Verizon Idea Exchange.
    Suggestions for any Verizon service/product/offering on the internet, telephone or TV can be made in the 'Idea Exchange' section of the Verizon Community Forums where it'll be noticed more by other Verizon community members as well as Verizon employees who can bring up individual ideas to the appropriate teams.
    Also, forum members can vote on the posted idea for greater emphasis.
    Please see:
    http://forums.verizon.com/t5/Verizon-Idea-Exchange-FAQs/Idea-Exchange-FAQs/td-p/231267 for more details.
    The direct link to the Idea Exchange section is found here:
    http://forums.verizon.com/t5/Verizon-Idea-Exchange/ct-p/ideaexchange

  • PI 7.0, SP 12, Communication Channel not available

    Hi everyone,
    I have installed SP12. In Component monitoring, communication channle button is not there. Can anyone tell me why? What i have to do with this?
    Rgs
    Bala

    Hi Bala,
    1.Have you done the post installations procedures ??
    2. You have import the latest SAP BASIS Component to your design time environment.
    Regards
    Ramesh P

  • Some radio channels not available anymore since last software update?

    I remarked that since last sofware upgrade by some radio channels I get the message "the error occured while loading the content" (example FIP from category jazz which I listen very often). This is very irritating since the internet radio is the one of the features i am using very often on the apple tv.
    Anyone knows the solution?

    HI and welcome.....
    It does the same thing when I log in under another user account. My mail application also stopped working at the same time.
    Boot from your install disc and follow the instructions here to check the startup disk for errors. See, *Try Disk Utility*
    http://support.apple.com/kb/TS1417
    If the startup disk "appears to be ok", then install the v10.6.5 Combo Update
    Then repair permissions. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. As long as you see, "Permissions Repair Complete" when it's finished... you're done. If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US

    Carolyn

  • FREE channel not available

    NBA League Pass is free thru Nov. 4 yet I can't view it on FIOS TV. WHY??

    joeesai wrote:
    NBA League Pass is free thru Nov. 4 yet I can't view it on FIOS TV. WHY??
    Did you see it was free for fios somewhere? The only providers I know of that are offering the free preview is Time Warner, Dish, Directv and Comcast, not Fios.
    http://www.freepreview.tv/nba-league-pass/free-preview-of-nba-league-pass-4.html

  • FIOS local channels SD not available - 20147

    Is anybody else finding that their local SD channels (below say channel 10) are not available yet their corresponding HD ones are fine?

    I responded to your identical post at http://forums.verizon.com/t5/FiOS-TV-Programming/Local-Weather-Channel-Not-Available-on-SD-STB/m-p/4... 
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • I want to play an episode from channel seven but keep getting message not available in this region - but it is

    GOing bananas trying to play an episode from channel 7 in Perth. Tryed using Photon for flash and ads play but not main event. Get a message not available in your region.
    HOw can I catch up with my favorite programs? Tv station recommends I change my IP address but I don't know how to do that or to change it to what. Love some ideas. Thanks, Lou

    Thank you so much, Ram!  I REALLY APPRECIATE YOUR HELP!
    I am wondering if it possible to manually create a node in RSA6 for the InfoSet.  I tried it by doing the following:
    I went to RSA6 and clicked on the white icon for "Create Node".  I then entered the number "8", followed  by the name of the InfoSet.  (I entered an "8", because all our DataSources seem to start with an "8".  I'm not sure why.) 
    The DataSource now shows up, but when I double-click on it, nothing happens.  When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
    Also, do you know where I can get my hands on the white paper? 
    Thanks again!
    Regards,
    Sarah-Jane

  • Channel saying programme not available on Vision b...

    Hi!
    I've been using Vision for past 2months and no issues so far, until around Christmas time. I tried to watch Five USA, one evening and says programme not available. Thinking it was a freeview issue, switched to normal freeview to check and the channel was working perfectly!
    Has anyone else's doing the same and are there any fixes?
    Thanks, Natalie

    Hi NatalieW,
    Thanks for posting. I'm sorry for the delay in getting back to you. have you tried re-scanning the channels? Did you manage to resolve the issue? If not drop me an email with your acount details and a link to this thread for reference. You'll find the address in my profile.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Communiocation channel: Value with name asmaBaseFileName not available

    Hi friends,
    After upgrade our Dev system to PI 7.1. Whne i try to start the communication channels  from Communication channel monitoring.
    I am getting error for all the channels as follows :
    Configuration error: Value with name asmaBaseFileName not available (Software version: 3.0.15)
    Kindly guide  me how to rectify this issue.
    Renu

    After upgrade our Dev system to PI 7.1. Whne i try to start the communication channels from Communication channel
    monitoring.
    Which metadata are the channels using...SAP PI7.0 or SAP PI7.1? If you dont import the metadata of SAP PI7.0 in the PI7.1 system then you may get an error for the communication channels....you should either change the channels to point to PI7.1 or import the metadata in ESR.
    @Kiran: The tpz reference you have given seem to be of SAP PI7.11 .... will it also work for SAP PI7.1
    Regards,
    Abhishek.

Maybe you are looking for