Bbm and e-mails not working

Hello,
My bbm isnt working- as its not sending or reciving messages also it is not updating anything and my emails aren't recieving or sending aswell.
Many Thanks.

Have you tried pulling your battery out while the power is still on, waiting 30 seconds and replacing the battery?

Similar Messages

  • Preview and Mac Mail not working after upgraded to 10.4.11

    Hello,
    I just upgraded to 10.4 everything works fine, after I upgraded to 10.4.11, I find funny noice on my hard drive and preview, mac mail is not working. Trashing the preference is not working.
    Urgent help please.
    Thank you
    Benny

    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
    And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • My BBM and internet is not working???

    Hi , I just bought a Blackberry Curve 9300 of an indivigual yesterday..The phone is unlocked to all networks but for some reason i can not connect it to the internet. I have registered the phone with my network company (vodafone) but still it wont connect to the net. It connects to the internet fine via wifi.. & Apparently according because of this , this is why my bbm is also not working. 
    Help will be much appreciated 

    Hey itzjkb,
    Welcome to the forums. 
    Are you still having the issues with BlackBerry Messenger and the Browser? The Browser issues could be service book related? You may have to contact your service provider to have them send you theses service book? When you try to use BlackBerry Messenger are you getting an error message? What happens when you try to use BlackBerry Messenger?
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Mail and .mac mail not working

    Well, I've sent 3 emails to customer service to no avail, so hopefully someone else on these inter-tubes is having the same problem. 3 days ago my mail stopped working. Mail on my Mac continually says my password has been rejected. OK, Mail sometimes is flaky. I can live with that (for now), but I also can't get email from a web browser. I can log in just fine and dandy. Bookmarks? Check. iWeb web sites? Check. iDisk, iCards, iCal? Check, check, and check. Mail? "Your information could not be displayed. Click here to try again." I've clicked "here" more times than Steve Jobs says "Amazing" at a keynote. I've tried on several different computers all with the same results. If anyone can help I'd be eternally grateful. Thanks! FYI, I have had this account since iTools.
    Allen

    Try recovering/changing your password. Take a look at theses sites which may help you:
    http://myinfo.apple.com
    http://iforgot.apple.com

  • Both iPhoto and Mac Mail not working after most recent security update

    Granted I wasn't there to see it happen but I think my mom's computer here is a bit fubar based on something having been changed on her computer prior to the last security update. My guess is that her friends who think they are 'helping' are actually causing some real problems but I'm here now so I'm just trying to fix it with what I can.
    Essentially neither her mail or iPhoto seems to be working. I've found a similar error message in other posts but what throws me for a loop is that, when I use the console log and look at the crash files for both applications, they are both telling me the exact same thing. Could they both be pulling the same file for use? I've already run the disk repair stuff, changed the permissions on the file and just about everything else I could think of - do I need to reinstall the application or perhaps the entire operating system?
    Link (dyld) error:
    Library not loaded: /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
    Referenced from: /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
    Reason: no suitable image found. Did find:
    /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer: unknown file type, first eight bytes: 0x6D 0x65 0x00 0x00 0x69 0x73 0x46 0x69

    Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
    I managed to solve the stickies and TextEdit issues by removing Butler in the end.

  • IOS 5.1.1 and IMAP mail not working?

    I'm wondering if iOS 5.1.1 broke IMAP mail on the iPad2 and iPhone 4S.
    Background
    I have used several email accounts on the iPad2 and iPhone 4S  (and the iPhone 4 before that) successfully for quite some time.  Just recently I noticed that there were no new emails in any of my IMAP accounts.
    Tried so far...
    I've deleted and re-entered my email account information several times.  I've hard "re-booted" the devices (home + off til the apple reappears).  None of these procedures have fixed things.
    Help if you can.  Thanks!

    You can post the question again, but trust me, iOS 5.1.1 did not break IMAP mail on the iPad. I realize that you are frustrated by this issue, but IMAP email accounts are working for me - as I stated earlier and they are working for the majority of IMAP email users as well. I posted this in your first post and I don't know if you even tried it.
    Have you tried just quitting mail and then restart the iPad and see what happens?
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You can also turn mail off in the settings, restart and the turn mail on again in the settings and sometimes that resets things back to normal.
    Settings>Mail>Your Email Account>Mail>Off. Restart the iPad and go back to Settings>Mail>Your email Account>Mail On. See if your email accounts will work.
    Did you think that maybe your email provider - Thunderbird I believe you said - could be experiencing an issue on their end

  • Sound alerts for received and sent mail not working

    How can this be fixed? Using yahoo email. Did work before upgrading to os4.3

    Do you have system sounds off?  Go into settings and see if you have selected Mute System Sounds or Lock Screen Orientation for the button on the right hand side of your iPad, just above the volume control.  If you have Mute System Sounds checked, simply move the button in the opposite direction.  If you have Lock Screen Orientation checked for that button, click your home button once to go to your home screen.  Then double click your home button twice and your most recently used Apps will appear on the bottom row.  On that row, with your finger, swipe those Apps to the right all the way and an icon will appear on the very left side.  It should be a mute button and by touching it, you will turn system sounds back on.  Let me know if this solves your problem. 
    If neither option works, reboot your iPad.  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart.  You will not lose any data or settings.

  • Gprs is in lowercase instead of captials (GPRS), internet, bbm and email are not working

    Since Saturday I have not been able to use my browser, bbm or email. I noticed my GPRS is now gprs (change from capitals to lowercase) i thought this may of been, because i was away from home. However i am now home and nothing has changed and i am still unable to use these resources. I have resetted my phone various times and done everything i could think off... HELP please!!

    When you say you've reset it, you've done it like this?
    With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
    Can you travel about 5 miles so that you're connected to a different tower and do the same reboot again?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IMAP and Apple Mail - not working properly

    Hi all,
    I am using Apple Mail and want to use my GMX account with IMAP and are facing 2 issues:
    (1)
    While all changes I make directly at www.gmx.ch are being made in Apple Mail on my MacBook Pro, the changes I make in Apple Mail (like moving mails to subfolders, deleting mails, etc.) are not reflected on the GMX server.
    (2)
    Sent emails are often put in the Drafts folder AND Sent folder. They are sent, but still appear in the draft folder as they were not sent.
    Any idea how to solve these issues?
    Thanks a lot & best regards!

    You aren't giving us all the relevant information, are you? I bet you access your Gmail account from more than one computer, don't you?

  • Dear all,  After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regatta from Hamburg Germany

    Dear all,  After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
     Cheers, Tom

  • How do I copy messages in a Mail folder to a flash drive?  Drag and drop is not working.

    How do I copy messages in a Mail folder to a flash drive?  Drag and drop is not working!

    Try doing a save as to the desktop and then try dragging thr .rtf file to the usb drive

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  Any clues?

    I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  I only have a previous version re-install disc as I bought the latest OSX off the app store.  Any help gratefully received?

    Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • I had somebody  work on my OS 10.9.2 to speed it up. He failed and now  Preview, Textedit, App Store, Mail and Contacts  do not work anymore. I can still use Safari, Firefox and iPhoto etc. How do I get it fix I can still use Safari, Firefox and ed again?

    I had somebody  work on my OS 10.9.2 to speed it up. He failed and now  Preview, Textedit, App Store, Mail (crashes) and Contacts  do not work anymore. I can still use Safari, Firefox, Word, Photoshop and iPhoto etc. How do I get the Apple programs fixed again?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • I got iPhone4 and safari and mail not working just blank screen appear

    I Got iphone4 after update to 6.1.3 YouTube,safari,and mail not working just appear blank screen wen i try any of thease app anybody can help me thank

    tried
    http://www.apple.com/support/iphone/assistant/phone/#section_1

Maybe you are looking for

  • Apple TV will no longer Sync and YouTube Not Working

    Recently my Apple TV (160GB version) has stopped syncing with my copy of iTunes. Previously it synced fine and when ever I lunched iTunes it would show up under my devices. But now it behaves rather strangely. Every now and again my Apple TV shows up

  • Error in downloading security update 2011-006

    Hi good day! I cannot download the latest security update 2011-006 to my macbook pro. The message says "security update 2011-006" can't be saved". My internet connetion is working. Can you help me on this? My other concern is that I cannot download t

  • Auditing all users file access - too much information

    Hi, I have enabled a GPO With the following: Computer Configuration\Policies\Windows Settings\Security Settings\Advanced Audit Policy Configuration\Audit Policies\Object Access -> Audit File System - Success on a file server. After that, I have enabl

  • "upadte was terminated " is the error while doing picking and its not saved

    hi experts, I have created a sales order. for that i created a deliery.then i created shipment .and i have put pick qty and batch. it gives a message Express document " Updated was terminated "received from author XXXX. and picking is not saved and i

  • Need File Upload Logic

    Hi Friends I have to upload one file contains: PERNR   STATUS     Staus may be : In Planning,In Process,Submitted,Approved. I should have to upload same Pernr with Statuses In Planning,In Procee,Submitted. But once it has processed with Approved it h