BBM Group Administrator
I created on BBM group and was administrator to that group. After that I changed my handset and removed myself from the earlier handset.
Now in the current handset, I am not the administrator and in the previous handset, I dont have the group...so now the problem is that we dont have any administrator in that group.
How to get back my administrator rights of the group?
Hey,
Ask someone from that group to remove you from the group and then invite you to the group and then you go to the group and press BB button go to 'Adminstration' then select 'Make me am Adminstrator'. It may ask you to enter the password if you kept one.
Cheers
If this solves you issue click "Like"
Similar Messages
-
BBM Groups - lost ability to be administrator when changing devices
My Bold's screen stopped working to I used an old loaner Curve that didn't support BBM Groups prior to moving into my Torch 9810 that I have now. My BBM contacts followed me but my BBM groups did not. I was able to get re-invited to these groups by others that were members of these groups but now the administrative is not possible as the BBM group still believes that those privledges still belong to my unuseable Bold. I've learned my lesson and will allow at least one other group member to have administrative permissions for future groups to avoid this in the future but, for our current groups, does anyone know of a fix to allow for the administrative properties to be moved? Thanks!
You create a new group (give another access as Admin), invite the other members.
Delete the old group.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi, I am new to this forum so please excuse me if some of my questions seem odd. I have two questions about using bbm groups. A group previously set up and used frequently for past year or so now no longer is working.
Specifically, when I go to the group I show up as 'available and there is an icon of a key next to my name. The other members of the group show up as 'unreachable' and when I highlight each individual the message is 'you are disconnected from John in this group'. Each of the other individuals are able to chat amonst each other but can't connect to me.
Each of the other members have been re-invited and have accepted the invite but I get the same error. Any thoughts and help would be appreciated? Also is there a list of the various icons that blackberry displays anywhere to be found?The 'key' icon indicates you are an Administrator of the Group.
You need to assign another member as an Administrator of the group, and then you leave the group, Wait a couple of hours or more, and have the remaining Admin re-invite you to the Group.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
BBM Group vanished and I cannot rejoin
I created a BBM group and added my friends a couple weeks ago. A couple days later I was booted from the group even though I was administrator for the group. So I got my friend to send me an invite and I got back in. Today I was booted again and I cannot rejoin the bbm group because it says I'm still in the group. Has anyone had this happen to them or know how to fix it?
Ask your phone carrier why you can't send a group text.
that usually requires MMS.
are you provisioned to use MMS? -
Can not add members to a Group as Group Administrator
Hi,
My collegue has created a Group 'WE_PM_group' and added me to that Group with role 'Group Administrator'.
But when I connect to the 'Create Group Or Add New Members' tool, then after SSO and acknowledging the 'read and understood Beehive Online Guidelines', it does not show the 'WE_PM_group' (it shows no Groups) and I can only Create a group.
My question : how can I add members to the Group that my collegue created and for which I am Group Administrator ?
Note : When I connect to the BeehiveOnline Administration Tool, I indeed see my e-mail address within the Group 'WE_PM_group' and with the correct role (Group Administrator)
Thanks for your help,
PeterIf you go to the APEX app and have any group - like your Administrator - you will have a list of group - each of them is a hyperlink. Click on the group and the Group settings will be displayed - one of the fields is the Manager email. Get him/her to puit your email in that field, separated by a comma, and you are good to go.
Phil -
Hello all,
My question pertains to BBM groups which isn't specific to either BlackBerry 10 nor BlackBerry 7 and earlier, and I was not sure which one forum location would be appropriate for this question, so I opted to post it to the Downloaded Software section in both the BlackBerry 10 and BlackBerry 7 and earlier spaces. My appologies if this was not "the right way to do it".
My question is one that I also posted on CrackBerry.com forums but after some time it seems I may stumped the community over there with this one.
Here is what I wrote over there:
"I recently created two BBM Groups and posted them here on CrackBerry with minor fuss. Yay for me. In each forum post I included a QR Code / Bar code of each BBM Group so as to make them easier to join. Yay for me again.
What I realised thereafter was that though this makes joining easy for anyone reading the posts from a screen other than their BlackBerrys, it does NOT make it easy for someone actually reading the thread from their BlackBerry and thinking to themselves "Oh hey, I want to join that group". At least, not that I can tell. I don't think it's possible to scan a QR code on your BlackBerry screen from the same BlackBerry, right? That's my assumption. If someone knows otherwise, please let me know, that would solve my issue.
SO, if I am right in my assumption and one cannot scan a QR / Bar code from one's own BlackBerry when said code appears on the BlackBerry's own screen, I am looking for another way to make it easy for someone reading the post to just "tap or click here" to join the group, to make as easy for someone who would be scanning the QR / Bar code from another source.
I tried getting the text URL for the group from the code and pasting it into a thread, but when it comes up in the CrackBerry app on the BlackBerry, the link is not clickable / tappable. I then tried adding the CrackBerry post editor tool's "Link" too to make the URL text an actual URL, though the only effect that had was that the URL appears clickable / tappable in the BlackBerry's CrackBerry app, but tapping / clicking on it has no effect. After making this change I tried to view the same thread post in my browser both on computer and on the Z10. When I click it DOES react but on the Z10 browser I just get a message "Unable to open bbg:<yadda yadda>".
So I've shared a lot of detail but the point I am really focused on is "is there a way for BlackBerry users to be able to join my BBM Group, on their own, as easily as if they had scanned the bar code, when all they have access to is the phone itself, and no outside media from which to scan the code"?
I am trying to avoid things like "Send me your PIN" and such because that just creates so many more steps and acts as a barrier to entry. Similarly, I don't see myself telling the reader "Just take this bar code you see here, and arrange to print or display it somewhere other than on your BlackBerry screen and then scan it".
Any input on this would be most appreciated!"
Essentially, I'd like to be able to post something that a BlackBerry user can look at on their BlackBerry, and tap / click on it, and boom they're done (i.e. they are at the same place they would be if they had instead just scanned the QR code).I think there is a case for it. With any luck someone from BlackBerry will see the suggestion and will pass it along.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution! -
Error in communicating with Group Administration Server
Hello everyone, i am requesting your help for an issue with LMS 4.2.5
When i browse to Admin-> Group Management -> Fault.
I get the following:
OGS Server Error
Error
Error in communicating with Group Administration Server.
It may be down or not yet up. Please make sure that the Group Administration Server is up and running, then refresh the page.
here is the pdshow output
pdshow
Process= ESS
State = Program started - No mgt msgs received
Pid = 5536
RC = 0
Signo = 0
Start = 10/31/14 14:13:21
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EssMonitor
State = Running normally
Pid = 5567
RC = 0
Signo = 0
Start = 10/31/14 14:13:25
Stop = Not applicable
Core = Not applicable
Info = ESS is fully up now !
Process= EventFramework
State = Program started - No mgt msgs received
Pid = 5584
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= SyslogCollector
State = Running normally
Pid = 5585
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = SyslogCollector Started at Fri Oct 31 14:13:28 CST 2014
Process= RMEDbEngine
State = Program started - No mgt msgs received
Pid = 5586
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= FHDbEngine
State = Program started - No mgt msgs received
Pid = 5663
RC = 0
Signo = 0
Start = 10/31/14 14:13:30
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EPMDbEngine
State = Program started - No mgt msgs received
Pid = 5696
RC = 0
Signo = 0
Start = 10/31/14 14:13:34
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EPMServer
State = Running normally
Pid = 5729
RC = 0
Signo = 0
Start = 10/31/14 14:13:38
Stop = Not applicable
Core = Not applicable
Info = EPMServer is up and running
Process= AdapterServer
State = Program started - No mgt msgs received
Pid = 5748
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= AdapterServer1
State = Program started - No mgt msgs received
Pid = 5749
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= FHServer
State = Running normally
Pid = 5750
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = FHServer started.
Process= INVDbEngine
State = Program started - No mgt msgs received
Pid = 5751
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= PMServer
State = Running normally
Pid = 5936
RC = 0
Signo = 0
Start = 10/31/14 14:13:46
Stop = Not applicable
Core = Not applicable
Info = PMServer is up and running
Process= IpmDbEngine
State = Program started - No mgt msgs received
Pid = 5960
RC = 0
Signo = 0
Start = 10/31/14 14:13:50
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMDbEngine
State = Program started - No mgt msgs received
Pid = 5993
RC = 0
Signo = 0
Start = 10/31/14 14:13:54
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMDbMonitor
State = Running normally
Pid = 6026
RC = 0
Signo = 0
Start = 10/31/14 14:13:58
Stop = Not applicable
Core = Not applicable
Info = DbMonitor Running Normally.
Process= ANIDbEngine
State = Program started - No mgt msgs received
Pid = 6027
RC = 0
Signo = 0
Start = 10/31/14 14:13:59
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= MACUHIC
State = Running normally
Pid = 6055
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= UTLITE
State = Running normally
Pid = 6056
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= FDRewinder
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= CmfDbEngine
State = Program started - No mgt msgs received
Pid = 6057
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CmfDbMonitor
State = Running normally
Pid = 6183
RC = 0
Signo = 0
Start = 10/31/14 14:14:08
Stop = Not applicable
Core = Not applicable
Info = DbMonitor Running Normally.
Process= DfmBroker
State = Running normally
Pid = 6190
RC = 0
Signo = 0
Start = 10/31/14 14:14:09
Stop = Not applicable
Core = Not applicable
Info = DfmBroker is running normally
Process= DfmServer
State = Running normally
Pid = 6322
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = DfmServer initialized OK.
Process= DfmServer1
State = Running normally
Pid = 6323
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = DfmServer1 initialized OK.
Process= DFMLogServer
State = Program started - No mgt msgs received
Pid = 6324
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DFMCTMStartup
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 11:55:05
Stop = 11/03/14 11:55:05
Core = Not applicable
Info = Application started by administrator request.
Process= FHPurgeTask
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 00:00:00
Stop = 11/03/14 00:00:44
Core = Not applicable
Info = DPS Task FHPurgeTask completed at Mon Nov 03 00:00:44 CST 2014. For status check Job Browser UI.
Process= DFMMultiProcLogger
State = Program started - No mgt msgs received
Pid = 6327
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CSDiscovery
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= DCRDevicePoll
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 09:15:02
Stop = 11/03/14 09:15:50
Core = Not applicable
Info = Application started by administrator request.
Process= CSRegistryServer
State = Running normally
Pid = 6328
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = CSRegistryServer is running
Process= Tomcat
State = Program started - No mgt msgs received
Pid = 6330
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TomcatMonitor
State = Running normally
Pid = 6670
RC = 0
Signo = 0
Start = 10/31/14 14:14:17
Stop = Not applicable
Core = Not applicable
Info = Tomcat Server up
Process= Apache
State = Running normally
Pid = 7183
RC = 0
Signo = 0
Start = 10/31/14 14:16:02
Stop = Not applicable
Core = Not applicable
Info = Web Server initialized ok.
Process= DCRServer
State = Running normally
Pid = 7204
RC = 0
Signo = 0
Start = 10/31/14 14:16:06
Stop = Not applicable
Core = Not applicable
Info = DCRServer is up and running
Process= CMFOGSServer
State = Program started - No mgt msgs received
Pid = 7257
RC = 0
Signo = 0
Start = 10/31/14 14:16:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TISServer
State = Program started - No mgt msgs received
Pid = 7258
RC = 0
Signo = 0
Start = 10/31/14 14:16:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DFMOGSServer
State = Program started - No mgt msgs received
Pid = 7323
RC = 0
Signo = 0
Start = 10/31/14 14:16:16
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NOSServer
State = Running normally
Pid = 7375
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = NOSServer is up and running
Process= PTMServer
State = Running normally
Pid = 7376
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = Started Successfully
Process= InventoryCollector
State = Running normally
Pid = 7377
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = InventoryCollector is up and running
Process= Interactor
State = Program started - No mgt msgs received
Pid = 7496
RC = 0
Signo = 0
Start = 10/31/14 14:16:24
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= InventoryCollector1
State = Program started - No mgt msgs received
Pid = 7497
RC = 0
Signo = 0
Start = 10/31/14 14:16:24
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= Interactor1
State = Program started - No mgt msgs received
Pid = 7589
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMProcess
State = Running normally
Pid = 7590
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = UPMProcess started successfully.
Process= UTManager
State = Running normally
Pid = 7591
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= EssentialsDM
State = Running normally
Pid = 7592
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = RME Device Management started.
Process= ICServer
State = Running normally
Pid = 7730
RC = 0
Signo = 0
Start = 10/31/14 14:16:31
Stop = Not applicable
Core = Not applicable
Info = ICServer started.
Process= EnergyWise
State = Running normally
Pid = 7923
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = EnergyWise Process is running normally Fri Oct 31 14:16:45 CST 2014
Process= PMCOGSServer
State = Program started - No mgt msgs received
Pid = 7924
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= ConfigMgmtServer
State = Running normally
Pid = 7925
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = DCMA is running normally Fri Oct 31 14:17:02 CST 2014
Process= ConfigUtilityService
State = Running normally
Pid = 7926
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = ConfigUtilityService started.
Process= CAAMServer
State = Running normally
Pid = 7927
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = CAAMServer started.
Process= VNMServer
State = Program started - No mgt msgs received
Pid = 7928
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= WlseUHIC
State = Running normally
Pid = 7929
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= IPMOGSServer
State = Program started - No mgt msgs received
Pid = 7940
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TopoServer
State = Program started - No mgt msgs received
Pid = 7941
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= LicenseServer
State = Program started - No mgt msgs received
Pid = 7942
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NameServer
State = Program started - No mgt msgs received
Pid = 7946
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NameServiceMonitor
State = Program started - No mgt msgs received
Pid = 8205
RC = 0
Signo = 0
Start = 10/31/14 14:16:39
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EDS
State = Running normally
Pid = 8290
RC = 0
Signo = 0
Start = 10/31/14 14:16:43
Stop = Not applicable
Core = Not applicable
Info = Initialization complete
Process= ANIServer
State = Running with busy flag set
Pid = 8768
RC = 0
Signo = 0
Start = 10/31/14 14:17:14
Stop = Not applicable
Core = Not applicable
Info = ANIServer started.
Process= UTMajorAcquisition
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 10:00:00
Stop = 11/03/14 10:14:13
Core = Not applicable
Info = Application started by administrator request.
Process= EDS-GCF
State = Running normally
Pid = 8807
RC = 0
Signo = 0
Start = 10/31/14 14:17:18
Stop = Not applicable
Core = Not applicable
Info = GCF Initialization complete at Fri Oct 31 14:17:53 CST 2014
Process= jrm
State = Running normally
Pid = 8808
RC = 0
Signo = 0
Start = 10/31/14 14:17:18
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DataPurge
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = 10/31/14 14:19:11
Core = Not applicable
Info = DataPurge initialization completed at Fri Oct 31 14:19:11 CST 2014.
Process= IPMProcess
State = Program started - No mgt msgs received
Pid = 9155
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CTMJrmServer
State = Running normally
Pid = 9156
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = Not applicable
Core = Not applicable
Info = CTMJrmServer started.
Process= SyslogAnalyzer
State = Running normally
Pid = 9246
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = SyslogAnalyzerService Started at Fri Oct 31 14:18:35 CST 2014
Process= ChangeAudit
State = Program started - No mgt msgs received
Pid = 9247
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 1014
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1965
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1964
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 2360
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3056
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3104
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1001
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3177
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3206
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1015
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1524
State = Program started - No mgt msgs received
Pid = 21804
RC = 0
Signo = 0
Start = 11/02/14 19:00:00
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 3306
State = Program started - No mgt msgs received
Pid = 17433
RC = 0
Signo = 0
Start = 11/03/14 11:37:17
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 1005
State = Running normally
Pid = 19289
RC = 0
Signo = 0
Start = 11/03/14 12:00:00
Stop = Not applicable
Core = Not applicable
Info = 1005 started.
Process= diskWatcher
State = Program started - No mgt msgs received
Pid = 9249
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Thanks in advance for your help.
Best regards.Also when i click the alarms bar that is sitting in the bottom right i got these in DFMOGSServer.log
[ Thu Nov 06 15:25:37 CST 2014 ] ERROR com.cisco.nm.xms.ogs.kilner10.KilnerEventConsolidator makeEvent - MAKE CONSOLIDATED_DFMOGS_EVENT: 9 data:
[ Thu Nov 06 15:25:46 CST 2014 ] FATAL com.cisco.nm.xms.ogs.server.OGSServer main - Exception while OGS Server start up: CTMRegistryClient::addNewURNEntry URN : ogs_server_urn ErrMsg : URN already in use
com.cisco.nm.xms.ogs.util.OGSException: CTMRegistryClient::addNewURNEntry URN : ogs_server_urn ErrMsg : URN already in use
at com.cisco.nm.xms.ogs.server.OGSImpl.publishURN(OGSImpl.java:1396)
at com.cisco.nm.xms.ogs.server.OGSServer.main(OGSServer.java:73)
[ Thu Nov 06 15:31:54 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:31:54 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Unreachable Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() Got 9 devices from TIS
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Unmanaged Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Suspended Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() Got 0 devices from TIS
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
Don´t know much about databases, but it seems im missing some important tables or data -
BB Z10 BBM Group updates and notifications not showing up in Hub?
BBM Group updates and notifications not showing up in Hub? The notifications are turned ON in Group settings. And all BBM notifications are enable in the Hub, still nothing shows up. Picture comments, addition, status updates simply dont show up. My device is on 10.0.10.58.
Any workaround?vijaymalhan, in your Hub settings > Hub Management, do you have BBM set to ON?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I'm hoping that this gets fixed when 10.1 comes out, but in the meantime...
There are two other family members with blackberries, so we figured we'd set up a family bbm group to communicate easier. Except, I can't join the group we made. We've tried both getting my phone to join an existing group (which I never seem to recieve the invite for) and creating a new group (where the phone tells me I've reached my maximum amount of bbm groups...but I have no groups, at all)
BBM seems to be buggy in general for me, ranging from being extremely slow when being accessed directly from the app (not from the hub), and alerting to an update when there is nothing listed in the 'update' tab. It has also stretched the screen in the hub when I tried switching to landscape (though it fixed itself within a couple seconds).
Can anyone give me a suggestion on what to do? Please let me know if I'm missing crucial information.
Solved!
Go to Solution.I am sure 10.1 upgrade can fix it. While waiting for it, I have solved my issue by joining the BBM Channel Beta Program! That upgrades my BBM client and it works smoothly since then.
-
No photo preview in BBM Group??
When a photo is sent to the BBM group, it is not showing up within the dialogue. I can only see the photo by backing out and going to the "Updates". On my Torch the pictures would show up within the dialogue. One of the group members with a Z10 says he sees received pictures within the group dialogue. Any assistance with this issue on my Z10 would be greatly appreciated.
Still trying to figure this out. Thought the new update might help but alas it did not. Anyone have an answer.
Thanks! -
BBM Group Chat Message Retrieval - Help Make a Mother's Day!
Hey folks,
I recently returned from a trip abroad and while away I sent to my family various messages to a little BBM Group my younger sister help set up of what I had done the previous days. For some reason that remains to be seen, the default setting on BBM Groups is keep messages for 3 days. Needless to say, there were a few messages that my mom really liked and wants to save, but she isn't technologically inclined and they have since disappeared from her phone.
Is there any way to get these messages back? Perhaps a phone restore to a few days ago or something? Or is there someone I can call at BB or my carrier (Rogers) to get them to retrieve it? Surely it's saved on a server somewhere.
My mom woke up this morning stressed beyond belief that she's lost one message I sent in particular (the one reflecting on the trip as a whole) and she would love to be able to save it.
Thanks, and to the mothers out there: have a happy mother's day!CSV files can be opened using Excel or most any database software or a notepad application...
How to manually transfer files between a BlackBerry smartphone and a Windows computer
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
BBM group chat question - from time to time, additional chats show up in our group that have no messages in them. When someone posts in one, the whole group sees it and the admins can delete it, but otherwise they tend to be localized to one or two members and we can't remove them. Is there a way for a non-admin to get rid of one of these chats? My understanding is that if I had started it that I'd be able to delete it but since I'm not the creator I don't have this option. Thanks.
Group chat is not supported yet.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
How to work with Group Administration
I am working as a System Administration.
I have knowledge in Windows based environment.
I am newly got a job, where I have to maintain MAC based servers.
I don't have knowledge about USER and GROUP Administration.
Please help me out about this thoroughly and in a simple manner.Hi
Start by reading this:
http://manuals.info.apple.com/en_US/Mac_OSX_Server_v10.6_Getting_Started.pdf
Progress onto this:
http://manuals.info.apple.com/en_US/UserMgmt_v10.6.pdf
The rest of the Manuals are here:
http://support.apple.com/manuals/#serversandenterprisesoftware
In case you were not aware these Forums are User to User only. No-one from Apple is obliged or likely to respond directly to your question(s).
I would also advise you to enrol in an Approved Apple Server Training Course if that's a possibility in your area? You should also consider using Google.
HTH?
Tony -
How do i get a BBM group calendar to update to my outlook calendar? I have tried everything I could think of but cannot seem to make this append. I have the blackberry desktop software release June 7, 2011 bundle 34.
I want to add that i have the Blackberry Curve 9300 3G
Thanks for any feed back at all as this would be great to solve this issue.jeepboydcrobert wrote:
For the default calendar where is this in the options? I dont have ADVANCE options but i will do a littl more research.
Find your main Options icon on the homescreen... could be called Settings or Tools or Options.
Then, Advanced.
I honestly don't know if the Group Calendar can be synced to Outlook. I will ask a friend.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
BBM Group Messages have year 2045 date stamp
Hi
My 9630 puts BBM group messages with a year 2045 date stamp. This places the messages above my other messages and is a real pain.
How do I correct this, please?Hey SinaOwolabi,
Welcome to the BlackBerry® Support Community Forums.
Can I have you check the date and time in the BlackBerry smartphone under Options> Display> Date and Time? Also is this issue only happening with BBM group messages?
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!
Maybe you are looking for
-
How can I copy my existing contacts from 1 Apple ID to a new one?
How can I copy my existing contacts from 1 Apple ID to a new one?
-
How can I append some data to an array via a case structure?
Basically i want to do the following thing: do if control=0 else Data=Data append data1 end if }while(run=1) We try to avoid local variable since the size of Data is pretty big. I am pretty sure i can add a shift register in a loop structure.But is i
-
How to Hide password when invoking sql plus from command promt?
When i try to open sql plus in command prompt window and enter the sqlplus command follwed by username/password@connection string, the password is not hidden. How do I get it to show **** instead of displaying password characters out? Also, what is t
-
Hiding default alv grid toolbar
Hi. is there any way to hide the standard toolbar of an alv grid (cl_gui_alv_grid) Thanks.
-
Hi, I connected to MySQL database using JDBC, displayed all data I need. But now I would like to detect changes in database (for example when somebody in network insert new row, I need get an event and then read data from database again). Did any bod