BBM not working for Curve 9220 after updated to 7.1 Bundle

Can anyone help me how to have my BBM working after I made some update with my software to 7.1 please help....

Hi felbenmark
Welcome to BlackBerry Support Forums
If you have Updated your Device Software then try those steps , see if that helps :
1- Register your Handheld .
KB00510 How to register a BlackBerry smartphone with the wireless network
Wait till a Registration messages comes in your message box.
2- Resend your Service Book
KB02830 Send the service books for the BlackBerry Internet Service
3-  Then perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back  
Try it and let us know.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

  • Safari not work for iPad mini after updated to ios 6.1.3

    After updated to ios 6.1.3, Safari just not response. I cannot input any web address. Do anyone has this problem? Do anyone know how to solve it?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Why AirPrint is not working on my ipad4 after updating to IOS 8.1?

    WWhy AirPrint is still not working on my ipad4 after updating to IOS 8.1

    Hello mmpreston,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with AirPrint on your iPad please follow the directions outlined below.
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    About AirPrint
    Take care,
    Alex H.

  • Airprint not working with HP printer after updating to IOS5

    Hi,
    I have an HP airprint printer (photosmart B210) that worked fine with my ipad2 and iphone 4 all running ios 4.
    Now I have a iphone 4s as well as the iphone 4 and ipad. After upgrading to ios 5, I can no longer airprint from any of my ios devices.
    I have tried turing everything off anf back on (including time capsule router, printer, ios devices).
    I can see the printer from ios but the job just sits waiting to print. I have managed to print one document after trying multiple times.
    Anyone having this issue?
    Thanks

    BattleAngelita,
    Welcome to the HP Forum.
    The fact that the SimplePass program is asking your for your Master Windows Password means the program survived the upgrade process to Windows 8.1 -- sort of.
    You may want to start with the following:
    Create a Restore Point >>  Create a Restore Point – Win7  OR  Create a restore point Win8
    Close all your programs and Shut down the computer
    Disconnect everything (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook
    Boot the computer and log in
    Check to see is SimplePass has sorted itself.
    ==================================================​========================
    You may want to try to Update your SimplePass program to the latest version in the version 6.x series.
    Before you do that, read and follow the instructions to Export your Webcards to your .tsd file.  Regardless of whether the website logins are working right now; you do need this backup in case you lose your HP SimplePass program (through complete removal / reinstallation or though corruption).
    Next, consider updating the HP SimplePass program to the latest of the version 6 series.  If you are already running the latest version, consider the other options in the guide, including the "Repair SimplePass" procedure.
    Open the file > Click on Download > Click “Open in Adobe Reader”
    Simple Instructions to Upgrade HP SimplePass
    Click the Kudos Thumbs-Up!
    It is a nice way to say “Thank You" for the help.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Sound Not Working for ENVY dv6 after recent updates

    Not sure if it was the most recent updates that did it or if it was just random, but...my sound has stopped working. OCCASIONALLY right after I restart, I can get the sound to work for a few minutes, but that's about it.  (I'm running Windows 8.1, by the way.)
    I've tried the troubleshooter and it claims there's no issue. Sound card is there and working as far as I can tell; it's all enabled. I'm not muted or anything quite that trivial. I would try uninstalling an update, but I'm not sure that would even help. Prior to the update, my sound had started becoming distorted at time and a little crackly. Nothing too drastic or often, so I wasn't too bothered. Obviously, I am bothered by a complete lack of sound.
    I have no idea whether or not headphones work still. I haven't been able to get the speakers working long enough to try them. "Fixit" claims it won't work with my computer, so I can't try that alternate troublershooter.
    I've read every message board imaginable and updated and re-updated all my drivers. Not the issue. I have no idea what's wrong and no idea how to fix it, but it needs to be fixed.
    Any help would be appreciated.

    Hello @samajama,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I have read your post on how the sound coming from your notebook's speakers is not working, and I would be happy to assist you in this matter!
    To restore the sound to your notebook's system, I recommend following this document on No Sound from Speakers (Windows 8). This should help to address a specific Microsoft update that has caused sound output issues.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My auto location service is not working on iphone 4s after updating to ios 8.1.3

    Hi every one
    i have recently facing a problem my compass and other apps which require location service are not working on my Iphone 4s, after i have upgrade my iphone ios to 8.1.3. Settings are correct i.e. location service is 'ON' and apps require location service are allowed to use my location.
    is anyone facing the same issue. Need your valuable suggestions and advices.
    Regards
    Muhammad Shahbaz
    Pakistan

    Greetings Biyase, 
    Thanks for contributing to the Apple Support Communities. 
    It sounds like the Outlook app is not launching after you updated iOS. In this case, I recommend the troubleshooting steps found at this link:
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Sincerely,
    Jeremy 

  • Built in Audio not working in MacBook Pro after update to 10.7.3

    The Built In Audio is not working in My MacBook Pro (Early 2011) after update to 10.7.3; I tried resetting the PRAM and SMC but it didn't helped me out. I can get audio only if i reboot my mac from Safe Mode or reboot after Repairing Disk Permissions in disk utility using the Recovery Partition;. If i make a normal restart or just startup then the built in audio disappers (audio is displayed gray in the menu bar) . Everything was working well with the 10.7.2
    - Audio Works well with the Boot Camp Partition. and There is a sound during boot up. 

    I dont have any backups and i dont have time capsule or  an external hard drive ready to be used for backup.
    My macbook is my the only one computer. The problem is that the animation is lagging when i change the window to dashboard or safari or mail or another window. Inspite of this my macbook works well.
    But 5 minutes ago, I noticed that if i run autocad on my mac- the lags go away!!!!

  • Trackpad Sensor Not Working in Curve 9220

    Hello friends,
    In my blackberry curve 9220 sometime trackpad sensor not working....
    So, please give me the solution of above problem and tell me what should i do for this problem.
    Fast solve this problem as soon as possible.
    Thanks in advance...

    yes because track pad is sensitife, try using like rubber to touch your track pad

  • AirPlay not working in all devices after update

    Hi,
    Anyone else having problem using AirPlay? After my apple tv was updated, all my devices (MacBook-OSX, iPhone-iOS8) cannot connect to apple tv. Remote also not working.

    Hello acid4382,
    The article linked below details a number of troubleshooting steps that can help resolve issues with AirPlay.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    Cheers,
    Allen

  • Internet is not working on cellular data after updating 8.0.2 in iphone 5s , wifi connectivity is fine , but no internet connection error message is start blinking even after cellular data is on , please help .

    I am using iPhone 5s , internet is not working on cellular data even after it is on , wifi is working properly . Please help apple team.

    Hello Mario:
    I'm actually surprised that Apple continues to push out 8.02 without addressing these issues. The problem will only anger more users and certainly finger-poking at Airplane Mode isn't the answer. This is an iOS8 code problem and no amount of 'resetting' is providing a reliable fix/solution that sticks.
    These issues with loss of cell connectivity, apps that have lost functionality, etc., which are all directly associated to the arrival of iOS8, are so widespread in the user community and pervasive within individual iPads that it's clear there are significant fundamental problems with this release. Given the problems are so blatant, it's fair to ask the question of how they got by the Apple validation team.
    What is the status at Apple on rolling out a fully V&V'd version to resolve this?  Respectfully, when it comes to some of my more useful apps, my personal iPad has become a paperweight. The user forums are full of these iOS8 complaints for several weeks and there doesn't seem to be a competent answer from Apple.  Even a "We're aware and we're working on it" would be well received.
    Any hope that you can provide will be appreciated. (I'll be monitoring the thread on my Dell laptop because, well, my iPad is i-Inop!).
    Thanks!

  • Facetime is not working in Ipad 2 after updating IOS5. I can't receive and transmit calls. Facetime uin the setting is on.

    Ipad 2 WiFI + 3G, Facetime is  not working after updating to IOS5. The facetime in the setting is turned on. I can't received and transmit calls.

    I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.

  • Import via Drag & Drop not working with LR CC (after Update from 5.7)

    I always imported my pictures by just dragging them in the Windows Explorer and dropping them to the Lightroom Gallery tab.
    This does not work with LR CC anymore.
    The longer way via "Import" works fine.
    Any suggestions?

    With Gallery i meant Library, my mistake (wrong translation, i am using the german version).
    What works with your setup doesn't work with mine.
    I attached a screenshot:
    As you can see (cursor) i can't import the file from the file explorer on the right.
    (The file is not already in the catalogue and i am in the library tab grid view mode).
    Using Windows 7 x64 prof Service Pack 1

  • Adobe flash is not working for internet explorer after 10.1 update?

    Ive been having this problem for a month or 2 now. My computer wanted me to update adobe flash and i did but if i go onto sites like youtube i cant get the program to work. ive checked to make sure the program installed which it had but its like its inactive or an empty shell. I have internet explorer and i have Macafee. the installation worked on my laptop but not our stationed computer or my friends' computers. What is going on???

    Under Add-ons, do you see Shockwave Flash object, and is it enabled?

  • Itunes Match not working on Iphone 4 after update to IOS 5.1

    Hello,
    Itunes Match has never been an issue for me in the past.  After I updated to IOS 5.1, I accessed my music app and noticed that Itunes Match was only showing artists that started with the letter "A" And "B".  So I turned match off, turned it back on and now itunes match shows a picture of a cloud and a progress bar.  the bar takes hours to move about half way, and then the app will just tell me that I don't have any music and I can dowloand music from itunes. 
    My wife is not having any issues with match on her iphone 4 and my ipad 2 running IOS 5.1 is also not having any issues.
    I have tried signing in and out of the Itunes store, turning on and off Itunes match, doing a hard reboot of the phone, I have rest and deleted everything on my phone and restored from a icloud back up.  I even tried to see if I could delete the music app data by going under settings/general/usage.....but the music app says it has "no data".
    This is Very frustrating for me, and I can't figure out what i can do to make my phone load my music match library again.  I thank you for any suggestions/help that you may have in advance!

    Exactly the same ting has happened to me over te past few days with my ipad2... I too resorted to setting my ipad2 up as a new device again to get match working... There is definitely something screwy happening on 5.1 I think... It was fine till I updated

  • AE linked comps not working on Premiere Pro after updating

    Hello,
    I recently updated my CC to the latest version and then opened a project I've been working on for the past month. All the After Effects linked comps show like vertical color bars in the project. I have tried to relink them but that only messed up the few comps that were still showing up as normal.
    Any idea how to fix this? This is costing me a lot of money and time. I've attached a screenshot of the issue. Thanks.

    As Rick says, it looks like you didn't update all of your software.
    What version of Premiere did you have before?
    What version of AE did you have before?
    What version of Premiere do you have now?
    What version of AE do you have now?
    Exact version numbers down to the last decimal, please.
    In the future, I'd suggest NOT updating in the middle of important projects.

Maybe you are looking for