BBM Pin got changed itself

Hello, everybody!
My problem with the BBM Pin is the following - A few years ago I had BlackBerry 9900, and I had a BBM pin assigned to that device. Later on that device was physically destroyed and I started using BBM on Samsung Galaxy (the same BBM Pin).
Recently i acquired BlackBerry Q10 and started to use BBM with the same pin (from BlackBerry 9900). It was not a problem, until I updated BBM a few days ago and then I noticed that my BBM pin has changed.
Does anybody know why it happened and what to do with such issue? I mean, eventually I am going to create a list of contacts with my new BBM pin number, but there is no guarantee that such sudden change won't happen again.
Thanks a lot for your advices.
Dmitri
Solved!
Go to Solution.

Thanks again. You completely answered my question. I guess for now I can't solely rely on leaving my BBM pun number as a contact method with me (unfortunately). It's really too bad that we can't keep pin number like an email address. The BBM system is a great method of communicaton, but being so heavily "connected" to one device/pin it's a bit frustrating. Well, there is nothing what we can do really. Thanks again. ) Being informed means being warned and prepared.

Similar Messages

CAN I CHANGE MY BBM PIN NUMBER ?

Hi
I blocked somebody on bbm messaging by mistake, now I cannot get them back on, is there any way to do this or can I change my BBM pin number.
thanks in advance
jim

PIN numbers are uniqure for each BB device. Refer what said above to unblock a blcoked contact
.RoCkInG dUdE.
Trust Your Technolust | Do not PM for any support
If a solution received, please hit on to show your support.

Change bbm pin

Hi
Is it possible to switch bbm pin between two bb phones ? And how ?

Hello Wqattan,
You will not be able to change BBM Pins as each manufactured Blackberry Device has it's own unique PIN. It is like a serial number to any device.
Cheers,
Matthew Tobias

BBM pin change?

Hello,
I am writing today to ask you about a problem I have been having for the last couple days to do with my BBM pin. Around 2am on Tues Oct the 2nd I started getting a lot of people adding me to BBM. I figured someone posted theirs on facebook and made a typo so I ignored it for a couple hours and just blocked everyone adding me. It continued though and started to get really exsessive (upwards of 100 people and climbing) at that point I added one of them to ask the person if they could tell their friends to stop adding me and to get the person who posted it to post the correct pin number. He told me that my pin was on a chain email called the BBM train and copy and pasted it into our conversation, it was an email written in Turkish with hundreds of BBM pins on them. I have never posted my BBM pin anywhere online before so it was a rather large shock to see this. My service provider is Rogers so I just contacted them about maybe getting my pin changed as this is a very dangerous situation and a very frustrating one. They told me that every pin is individual to the divice and so I would have to get a new phone but they also gave me an email address which did not work to see if you can do anything for me. Is there any way at all to get my pin changed?
Thank you for your consideration
Erin
Solved!
Go to Solution.

They either reprogrammed the device with a new PIN or gave you new internal hardware, or a new device altogether. There's no way for me to know from here. The end result is the same, your pin has changed.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Background User BWREMOTE got changed to Dialog user

Hello,
Recently we had a refresh in our system and after the refresh I found that a background user BWREMOTE got changed to dialog user and more strange the change documents is showing that the BWREMOTE has itself changed the user type. anybody can comment to this scenario?

Looks like an amateur job (using dialog type user).
You need to restrict the access of bwremote itself.
The first step is S_USER* objects to display only.
Contact your BW developer team. For sure they did it.
Cheers,
Julius

Bbm pin number

hi all i have recently purchased a blackberry curve from a friend and have a bbm pin number which i have sent to a few friends and when they try to add me it says to them invalid pin does anyone no how i can change the pin or rectifiy the problem please help

You can't change the PIN of a device, it is unique to your BlackBerry and hardcoded at the factory.
Are you giving them the full eight alpha-numeric characters?
Check your private messages here.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BBM pin chnage

Someone has broadcast my BBM pin somewhere so I now keep getting requests from ppl in Iran.
I contacted Blackberry and was told I can change my BBM pin but could not tell me how.
Can anyone tell me how to do this or I will have to get a new phone which I dont want to have to do.

Thanx for the reply. I dont get why Blackberry told me you can then lol.
Looks like I'm shopping for a new phone then.

BBM pin lost as well as contacts.

Dear Admin,
I am using the bbm application on my Iphone 5s and suddnly it logged me out , unfortently I forgot the password so I click on forgot password and it went to my email and when I clicked on the linked it tells me your account is no longer.
and they creat a new pin under my email
I need to get back my old pin as well as the contacts.
old pin: {REMOVED}
under this email :{REMOVED}
Thanks
Mahdi
Mod Edit: Edited post to remove personal information to comply with the Community Guidelines and Terms and Conditions of Use

If you change accounts your pin will change. There's no way to get back the original pin. sorry.

My phone got changed to another language and now my phone is disabled from trying to unlock it numerous amounts of times. The phone tells me to connect to itunes, but itunes tells me that I must insert the password into the iphone before proceeding.

my phone is disabled because the language got changed and I kept trying to unlock it. It tells me to connect to itunes but then itunes tells me that I have to insert the password on my iphone before proceeding. I am unable to type in the password. Help!!

If you forgot your passcode, you have to use recovery mode to restore
http://support.apple.com/kb/HT1808

Some how my IPOD Shuffle play list got changed to genres, I can't get it back listed as I added each song?

My play list for my I POD Shuffle somehow got changed to genres. I can't find a place to help me return it to it's original version of 1st song, followed by second
etc: I have 169 songs, and need help?

Well, shut my mouth! There was a similar question over to the right about a 6th generation nano repeating over and over again -- I read the answer to that one, followed the instructions, and holy crap, it's back to normal.
Is there a name for this when you end up replying to your own aggravating question? That's what I did. Now I can go out and listen. It's only 91 degrees. Heaven. Thanks, Apple.

GR based IV is disabled but it got changed

HI gurus ,
We are using SRM 5.0 Extended classic scenario, ECC 6.0
In the Purchase Order ,item data-> Follow-on documents -> Confirmation-Related Invoice Verification is disabled.
But somehow the GRIV indicator got changed , I can see the change log for the same.
User just changed the Requester and Goods recepient , but the change log shows he changed the GRIV indicator too.There have been no changes on the GRIV field in the vendor master.Also when the changes were done, there were already some partial GR and invoices posted for the PO.
Because of this , the PO fell into 'error in process' from 'ordered' status. Although I have removed the GRIV indicator at the table level and pushed the PO again into ECC which has changed the status of the PO to 'ordered' again, I want to know how the GRIV indicator got changed automatically ?
Is there any OSS note for this ??

Hi experts,
We are on SRM 7.0 ECS , support pack SAPKIBKV08.
Our vendor master in SRM has following flags set:
GR= set
IR = set
GR based IV=set
Now in an SRM PO , buyer wants to set the following flag:
GR = buyer wants to set
IR =buyer wants to set
GR based IV= buyer wants to reset GR based IF flag , since the invoice comes before the GR and has to be paid
But in the SRM system , if GR flag is set , and IR flag is set , then GR based IV flag gets set automatically. Buyer is unable to uncheck it. This is a bug in the system , how to resolve this. the above mentioned notes, 1010791, 1445234,1114343 are not applicable to the system .
(If a PO was directly created in ECC system , and GR falg and IR flag is set , then buyer can manually uncheck the flag)
Rgds
sumendra

How to know whether any item value got changed

How to know in Apex whether any form item got changed. That will help me to know when the user will be pressing the "Apply Changes" button and I will popuplate the "User Modifed" and "Date Modifed" column values in the table. For now, I dont want to write database triggers, but to implement it at application level.

Hi Deb
For a really good explanation of the naming /numbering of tabular form items see Patrick Wolf's blog on the matter.
http://www.inside-oracle-apex.com/which-tabular-form-column-is-mapped-to-which-apex_applicationg_fxx-array/
He also gives a simple example of using check-boxes in tabular forms here
http://www.inside-oracle-apex.com/checkboxes-in-tabular-forms-the-easy-way/
You will notice in his example, that the apex_application.g_f40 is specifically named as 40 - a high number assuming that you don't have more than 39 editable columns in you tabular form - shown in the name="f40" code.
<input type="checkbox" #ADMIN_USER_CHECKBOX# value="#ROWNUM#" name="f40" id="f40_#ROWNUM#"/>#ADMIN_USER_CHECKBOX#
In essence the columns are numbered (only the editable ones) in the order in which they appear in the select statement - so the first editable column will be f(01), next f(02) etc - except where the column is specifically named - in this case f(40).
I had a situation where I wanted to programatically stamp the user's name into a column depending on whether the user checked a check-box in each row.
But if the column is editable and visible, then the user is free to type into this cell - this I wanted to avoid.
Something that took me a while to work out is that you can hide an editable column - so it can updated by your procedure code - not by the user!
The way to solve this is to have the sql statement select the relevant column twice - the first one is the editable one and hidden, and the second copy is a normal report column - displayed but not editable.
I used Patrick's example in the link above to set up my tabular form with the first column as a check-box.
The user then marks the desired rows by clicking in the check-box and submits / saves.
The procedure then detects which rows have been checked - updates the editable (but hidden) database column, and then re-displays the result - with the second copy of the same column now showing the updated value!
I hope this helps.
Look at Patrick's other postings - they are so helpful.
Mike

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Font in Safari got changed, how do i change it back?

How do I revert to the original font in Safari. It somehow got changed 2 OS's ago and I don't know how to change it back. It's currently a very distracting font that is hard to read.

Apple decided to trash that preference in their now basically useless iOSified Safari 6 incarnation. Now, you have to revert to using the Terminal to restore eminently useful preference settings.
Ronald P. Regensburg wrote at MacInTouch:
This works in Safari 6. You may need to empty caches (enable Develop menu in Safari 6—another useless change to previous behavior) to see the result and remove the css setting (to "nothing selected"). Font names with spaces need to be between quotation marks.
Full example for proportional font:
defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2StandardFontFamily 'Lucida Grande'
defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2DefaultFontSize 14
Full example for fixed width font:
defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2FixedFontFamily Monaco
defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2DefaultFixedFontSize 11

My display pic on BBM won't change

My dispay picture on BBM will not change - meaning, I can change it on my phone but it does not change for my contacts. What can I do so that my contacts see new display pics? Thanks.

Hello LLG4815,
Welcome to http://supportforums.blackberry.com
Try resetting your BlackBerry
And check that your profile image change
If the problem evidences the persistence applies a hard reset
Hold the power button for 30 seconds.
VIA | gutijose14
http://supportforums.blackberry.com/t5/BlackBerry-Q5/Display-picture-wont-update-or-change-Q5/m-p/26...
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

BBM Pin got changed itself

Similar Messages

Maybe you are looking for