BBM problems -- between a Curve (in Canada) and a Bold (in UK)

Hi,
I have Blackberry Bold with a UK (orange mobile provider) and my dad in Canada has a Blackberry Curve with Wind mobile provider. We have been trying to add one another several times from each end. We do receive the request but then after accepting the request it goes to pending and it is never added to the contacts. We have tried deleting and sending a request a few times, do you have any suggestion? I have added people from Canada and UAE before with no problem I am not sure what is going on.
Thank you very much.
m.

I do not think so unless you have a UK credit card - if you have iPhoto '11 you can change the print product country to the UK - you can always give it a try
LN

Similar Messages

PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION AND 2008 MAC VERSION ON MY LAPTOP. HOW DO WE FIX THIS?

PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION AND 2008 MAC VERSION ON MY LAPTOP. HOW DO WE FIX THIS?

cherifrombartlett wrote:
PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION
What are you talking about? If I'm not not mistaken the iPad was released in April 2010 so there is no 2009 iPad version.
Typing in all capital letters in a forum like this is considered to be rude and all capital letters indicate that you are shouting.

Unit of measure problem between Order UOM, Base UOM and Inspetion UOM

Material: ROH-001
Base UOM: Meter
Order UOM: Kilogram
Inspection UOM: Roll
I have already maintained conversion factor in material master between meter and kilogram.
Is there any way to maintain KG in inspection plan header level and Roll in inspeciton plan operation level?
I tested, but the sample quantity is not as expected. Below is my testing data, please advise, thanks.
10 KG = 1,989 M
100 KG = 1 Roll
GR: 100,000 KG = 198,900,000 M
Sample size = 200 Roll (My expected sample size is 50 Roll)
Sampling plan:
   Lot size                  Sample size           c1                 d1
               8            5     0     1
              15            5     0     1
              25            5     0     1
              50            5     0     1
              90            20     1     2
             150            20     1     2
             280            32     2     3
             500            50     3     4
            1200            80     5     6
            3200            125     7     8
           10000      200     10     11
           35000      315     14     15
          150000     500     21     22
          500000     500     21     22
     10000000000     500     21     22

sorry, my mistake.
This is applicable.
Problem solved.

Problems between HP network printer, WRT55AG, and wireless-G devices...help!

I'm having a weird problem that I just can't figure out. If I connect my HP LaserJet 2605dn printer via Ethernet to my WRT55AG router, all of the devices on my network (wireless-A, Ethernet) can see/access the printer except for the wireless-G devices. However, if I connect the printer via Ethernet to a wireless-G bridge, and then use the bridge to connect wirelessly to my router, my wireless-G devices can access the printer without any problems.
Here's a little more info. If I reset the router, the wireless-G devices are able to access the printer (connected to the routher via Eithernet) up until the point when I enable WEP...then the printer is inaccessible from the wireless-G devices. I've made sure that all of my WEP keys are correct; besides, the wireless-A devices can access the printer with WEP enabled and the wireless-G devices can connect to all the other devices on the network.
I suspect that something is screwy between the printer and the router. Using the wireless bridge is an acceptable work-around, but it bugs me that I can't get this working the "right" way.
Oh yeah...the firmware on both the printer and the router is up-to-date.

Have you tried reinstalling the drivers for the printer?

Pairing problems between my new nokia n82 and blue...

I tried pairing up my n82 and bh-208 last night, but couldn't get it to work. The n82 recognised other bluetooth devices. My bluetooth was definitely working, as I had used it earlier with another mobile fone. I've followed all the instructions and paired other bluetooth headsets before, but no luck this time, even after trying several times. Any suggestions?

i had same problem, i just kept chimping about until it finally gave in and connected. no idea what happened, possibly that you can connect TO the phone, but it won't connect TO OTHERS, but y, that is the question. come on NokNok....what's the fix?
MS

CHARACTER SET CONVERSION PROBLEM BETWEEN WIN XP (SOURCE EXPORT) AND WIN 7

Hi colleagues, please assist:
I have a laptop running win 7 professional. Its also running oracle database 10g release 10.2.0.3.0. I need to import a dump into this database. The dump originates from a client pc running win XP and oracle 10g release 10.2.0.1.0 When i use the import utility in my database(on the laptop), the following happens:
Import: Release 10.2.0.3.0 - Production on Tue Nov 9 17:03:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: system/password@orcl
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Import file: EXPDAT.DMP > F:\uyscl.dmp
Enter insert buffer size (minimum is 8192) 30720>
Export file created by EXPORT:V08.01.07 via conventional path
Warning: the objects were exported by UYSCL, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
export client uses WE8ISO8859P1 character set (possible charset conversion)
export server uses WE8ISO8859P1 NCHAR character set (possible ncharset conversion)
List contents of import file only (yes/no): no >
when i press enter, the import windows terminates prematurely without completing the process. What should i do to fix this problem?

Import: Release 10.2.0.3.0 - Production on Fri Nov 12 14:57:27 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: system/password@orcl
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Import file: EXPDAT.DMP > F:\Personal\DPISIMBA.dmp
Enter insert buffer size (minimum is 8192) 30720>
Export file created by EXPORT:V10.02.01 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
List contents of import file only (yes/no): no >
Ignore create error due to object existence (yes/no): no >
Import grants (yes/no): yes >
Import table data (yes/no): yes >
Import entire export file (yes/no): no >
Username:

Problems between Pc suite 6.8 and Bluetooth connec...

regards from Mexico!!
this is my first post here, after read several post kind related I still have following error :
When trying to connect to PC suite I get this message:
"cannot use the connection type. check all the needed hardware, software and drivers are available"
I have made all fixes for Win XP SP2 (I can sync my iPAQ 2415 with active sync)
have dell laptop latitude D610
using belkin f8t001 V2 bt driver 1.4.2.10
Nokia Pc suite ver 6.80.20 (uninstalled/installed again)
I’m able to get OBEX file transfer from my BT places with 6230
I have the com6 as bt serial port
What am I dong wrong?????
Your comments and help will be appreciated!!
Tnks

hi 6230mx
have a look at the No Available Connection Type topic in this section
There are only 10 types of people in this world. Those who understand binary and those who don't

Ping problems between wired/wireless

I have 2 workstations connected to a wrt54g router setup as a gateway. This is a home network. bigserver and aclient both have fedora core 6 installed. bigserver is connected via a wire and aclient is using wireless. Both have internet access and can ping the router, 192.168.1.1. aclient can ping bigserver and ssh to it. bigserver cannot ping aclient and gets a host unreachable. I also have an xp laptop, using wireless that has internet access, that can ping the the router, bigserver but cannot ping aclient. None of the others can ping the laptop either. Is there some setting in the linksys that causes problems between systems that are wired and others that are using the wireless? Thanks for the help.

Hi… logon to router’s setup page, try changing wireless channel to 1 or 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change Transmission rate to 54 MBps…try disabling personal firewall on wireless computer, if you've installed any...check whether it makes any difference or not.

Twitter and BBM Problems on new Blackberry Curve 9220

Hi Everyone!
I just bought my new Blackberry Curve 9220 from Globe (A Philippine Service Provider). . So I installed the newest version of Twitter on my phone and it says that there is no internet connection even if I'm connected to my wifi. I can't upload my photos to Twitter but I can tweet and send DMs.Regarding the BBM problem, I can't connect my BBM with my twitter and facebook, it's always stuck on step 2 which says that I need to turn my radio on. I tried to connect it with the radio on but it still won't work. Please help me.
Thanks.

rielwagan wrote:
I got the same problem! i can't use twitter, facebook and also internet browser even if my BBcurve is connected to my wifi, my wifi is working properly in laptops and desktop but when it comes to my bbcurve its not working why is it like that ?but when my phone is connected to other wifi routers it is working properly but my in my router And i also got a problem when it comes to the BBM i can't see the pictures of my contacts and they also cannot see my display picture ( someone help please (
Hi and Welcome to the Community!
Please scroll up and read post 2 in this thread...there is a very important question in there that, for your situation as well, needs to be answered. Further, the other information in that post might apply to you as well.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Between the Blackberry Curve 3G and the Bold 9700

I am confused between the Blackberry Curve 3G and the Bold 9700. Please guide me with the difference in features,options,performance,display.... which one is advisable...

The 9700 has 3g
9700 has a better camera and a flash
9700 has GPS
http://na.blackberry.com/devices/compare/
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hi, I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while." I rebooted and it didn't fix the problem. I just got

Hi,
I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."
I rebooted and it didn't fix the problem. I just got my iPhone 4s (unlocked right from Apple) several weeks ago.

Siri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
Best of luck.
(Occasionally from Lower Economy, Colchester County).

Communication problem between NetBeans and Tomcat

hi!
i got a quite mysterious problem. here is what happens:
- i start NetBeans 5.5.1 (the first time)
- i want to debug my JSF-Project, the Debugger starts
- After a few seconds the debugger waits for tomcat (it sais: "Waiting for Tomcat...") and tomcat starts
- Again after a few seconds the tomcat-debugger-output sais "Tomcat startet in 3333 ms".
okay.
when i enter http://localhost:8084/ in my browser i get the tomcat homepage, so the server has definitely started! But nothing happens in NetBeans and nothing happens with my project....
In the lower-right corner i see this blue working-bar that sais "deploying project" but nothing happens. The Project-Debugger-Output still sais "Waiting for Tomcat..." but nothing happens...
And after something around 3 minutes (i guess it's a timeout) i get the error "Starting of Tomcat failed." But is HAS started, i can login to the Administration-Area in my browser!
so i guess there is a communication problem between netbeans an tomcat. Netbeans waits for a message from tomcat but tomcat doesn't send it..or netbeans doesn't understand it.
But the story goes on:
When i press the debug-button a second time it takes only a few seconds till i get the message: "Tomcat server port 8084 already in use". OF COURSE! Because Tomcat has already startet and can't be stoped by NetBeans.
i'm trying to solve this problem for 4 days now, so i would be very happy if anyone has an idea where to start/continue the search...
thanks,
flo.
some system-info:
- windows vista business 32-bit
- no firewall is running
- AntiVir Personal Edition IS running
- Yahoo Widgets Engine IS running
- no other software is running
and finally the tomcat-log:
Using CATALINA_BASE: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base
Using CATALINA_HOME: C:\Program Files\NetBeans\enterprise3\apache-tomcat-5.5.17
Using CATALINA_TMPDIR: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base\temp
Using JRE_HOME: C:\Program Files\Java\jdk1.5.0_12
Listening for transport dt_shmem at address: tomcat_shared_memory_id
21.09.2007 18:27:50 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jdk1.5.0_12\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\Common Files\Teleca Shared;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\MySQL\MySQL Server 5.0\bin;C:\Program Files\cvsnt;
21.09.2007 18:27:50 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:50 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 1862 ms
21.09.2007 18:27:50 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
21.09.2007 18:27:50 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.17
21.09.2007 18:27:50 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
21.09.2007 18:27:53 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:54 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
21.09.2007 18:27:54 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/31 config=null
21.09.2007 18:27:54 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
21.09.2007 18:27:54 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3626 ms

As i wrote before, the same problem occured for me. I have found a solution which is : Go to tools menu and then select options . In the proxy info, select No Proxy.
I hope this help you

SSO problem between EP 6 SP9 on Web AS 6.4 JAVA and WebAS 6.3 JAVA.

We have Portal EP 6 SP9 running on Windows 2003 and IIS version 6.
Also implemmnted NTLM to get to the Portal from desktop.
Every thing works fine.
I have also setup SSO between Portal EP 6 SP9 and SAP R/3 4.7, SAP BW 3.3. Every thing works just fine.
We also have product called xEM which runs on webAs 6.30.
SSO is not working between EP 6 SP9 which runs on WebAS 640 Java & xEM which runs on WebAS 6.30 JAVA.
I tried options and changed logon module stack fo ticket and it did not help.
I imported certificate from Portal to webAS 6.3 where xEM is running. Used option load from ticketstore in the admin tool.
Previous to this we have SSO setup between EP 6 SP2 running on WebAS 6.2 JAVA & xEM running on WebAS 6.3 and it just worked fine.
Only change is the new Portal EP 6 SP9 running on WebAS 64.0 JAVA only.
Please help me.

Hmm interesting problem. Have you tried increasing the logging level on the 6.30 WebAS server so you can get more detailed info on what the issue might be?
If so, can you post some of it?

Problems between Xcelsius and WebDynpro for Java

How should I do to show Xcelsius in WebDynpro for Java?
How should I transport data between Xcelsius and WebDynpro?
How should I control WebDynpro with Xcelsius?For example,firing plugs in Xcelsius like in WebDynpro to change one view to another.
How should I do to execute a Java method in Xcelsius?For example,scheduling a job on clicking a button in Xcelsius.
Besides these,I also want to know the same problems between other BOE contents and WebDynpro for Java.
Regards,
Abe

Hi Pradeep:
Well that purely depends on the business application (project) your client is proposing. Following are very few factors which will drive for creating web-based applications:
VC: it's a UI modeling tool (non-programming) for creating rapid creation of web-based applications.
WD: its a powered by Java and ABAP with which you can create robust business applications.
If your client is very choosy about rapid application development, reporting, rich user interface, to reduce TCO then VC is the choice. Or if the project contains typical integration with SAP and non-SAP systems, complex business logic development, integration with WCM systems...etc then WDJ is the option.
If youve some sort of custom development with facilitating the Development Infrastructure (NWDI) then WDJ is the only option I could say.
We hope with NW CE 7.1.1(referred by Priyanka Singh) tighter integration between these TWO tools may over come the ambiguity of using them.
Tnx,
MS

Do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use laptop. is there problem between apple and FB?

do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use my laptop(non-apple). is there problem between apple and FB?

Facebook apparently has their site coded poorly for tablets with touch screens. Try using the Facebook app. It is not perfect either but it is better than view in a browser lately.

BBM problems -- between a Curve (in Canada) and a Bold (in UK)

Similar Messages

Maybe you are looking for