BBM stopped working and keeps trying to restore itself
My BBM has suddenly stopped working. When I click on a BBM from the Hub I get an option to Setup or Cancel. When I click setup it tries to restore but it just hangs. I've waited over an hour multiple times.
I've tried to reboot and done a battery pull but the same thing happens.
When I try to open the BBM App itself it goes straight to restore and then hangs.
There many ppl complaining of this issue today, please check this thread: http://supportforums.blackberry.com/t5/BlackBerry-Z10/blackberry-z10-restoring-your-bbm-information/...
A new thread isn't required for the moment.
P.S. A solution though hasnt yet been found.
If my post has helped you, give it a LIKE
Similar Messages
-
my iphone 3gs stopped working and i tried to restore it on itunes but it said a file was corrupt any suggestions?
What file did it say was corrupt? What error number? What is showing on your phone right now? What version of iTunes? What kind of computer?
-
My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?
I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
http://www.apple.com/retail/geniusbar/ -
My IPhone 5's Imessages just stopped working and I tried restarting and then turning them off and turning them on. It now says "Waiting for activation" and has said this for 15 minutues.
At the time of this post, there seems to be a problem with iMessage and Facetime but only some users are affected.
http://www.apple.com/support/systemstatus/ -
I was trying to update my Iphone 4s and tried to restore itself. Now it will only say plug into itunes to restore.
Hello Thebenjah13,
The Update was not completed and due to incomplete update your Device is now in Recovery Mode and the only option left with you is to Restore your iPhone using iTunes on your Computer which will take your iPhone to Factory settings. -
Due to a bad install of Mavericks, my macbook was just on a loop. I correctly formatted a new external drive and installed Yosemite there and was able to retrieve my files onto the external drive. So for a while I was able to run my mac from the os on the external drive and it was fine. I built up enough courage to clear the internal hard drive. or so i thought. It will no longer recognize my admin password and I can't gain access through my Apple store and iCloud password so I have effectively been locked out. i have tried all suggested ways to deal with that. I can't seem to install the os from my external drive on to the macbook internal drive. My dvd/cd player hasn't worked for a long time so I can't install a snow leopard disc and upgrade from there. I really need help here. thanks
Tried this just now, but it didn't work. I copied it to my internal drive, but if I then selected that file and told it to open in iTunes, it played the one on my external drive.
However, it was possible to play the copied movie in QuickTime Player. I wonder, though, would that approach work with a rented movie? The movie I was using was one I bought from iTunes. -
Lock/power button doesn't work and phone tries to turn itself off
So this morning i woke up and for some reason my power/lock button on my iphone 4s doesn't work, but that's not the biggest problem because there are work around's. the real weird thing is that now my phone just decides its going to shut down. It will randomly bring up the screen to swipe to shut down even when im not even holding my phone. Unfortunately my phone is out of warranty so I am getting ready to do a restore but other than that i have no idea what else i might be able to do.
any help is welcomed.Here is Apple's article on jailbreaking. It is against the terms of this Apple forum to help with jailbroken devices. Jailbreaking frequently causes problems.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening
Tried the un-install and getting the same problem although it takes a bit longer before it crashes this time. Checked the problem report and it looks the same as the previous reports.
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.2.1.1
Application Timestamp: 4d756476
Fault Module Name: MediaToolbox.dll
Fault Module Version: 1.0.694.3
Fault Module Timestamp: 4d4d9a00
Exception Code: c0000005
Exception Offset: 0034a672
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160 -
I have an apple wired keyboard hooked up to my Mac mini. A while ago, the keyboard stopped working. I tried re plugging it in, and nothing's working. The "Bluetooth settings" keeps popping up, but I don't have Bluetooth, it's wired. Please help!
System Preferences->BlueTooth and turn it off. Restart and see if that fixes the problem.
-
i am getting really frustrated with syncing and updating my iphone, everytime i sync when the photo's have sunk a window pops up and says itunes has stopped working and closes the programme, it also says that windows may send me a solution but they never do !!!! please can someone help me
Hello Suzanne,
Thank you for providing the details of iTunes unexpectedly quitting. You have taken some really good troubleshooting steps already. I found an article with additional steps you can take to further isolate and troubleshoot an issue like the one you described:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am on a Windows 7 OS attempting to reduce pdf size with my Adobe Acrobat Standard XI & Pro. The application keeps timing out and at the Subsetting embedded fonts portion and the application gives "Adobe Acrobat has stopped working" and then closes. The document is 275 pages. Is there something I can do to stop this?
Hi Ricci,
Since when are you facing this issue? Did you tried system restore to a date before this problem occured.
Does acrobat stop working when you open this specific pdf file or with any pdf file that you open?
Regards,
Rahul -
Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?
Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648) -
If you're trying use your hotspot and connected to wifi on your iphone, does the wifi stop working and start using your data instead of staying connected to the wifi?
Spencer Simmonds wrote:
Thanks for the quick response. What you have said makes sense but there is no rhyme or reason to he data used. I reset my cellular data counter to zero so both sent and received read zero. I was connected to wifi and let the phone to go into sleep mode. I waited about ten minutes and sent myself the same email four times, each with a 750 kb attachment. It was sent to my .me address so it was push mail on my phone. Sure enough I checked a minute later while bringing the phone out of sleep mode and checked the data. It showed just 10kb sent but 1mb received which just doesn't tally with the 4 x 750kb mails received. It just isn't making sense.
He knows what you asked and has already answered it!
I thought I had read where the iOS4 (or maybe just the iPhone 4) was supposed to be able to keep wifi connections alive while inactive. If the phone is sitting there on a charger with a wifi connection available, why use the 3G? -
When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?
Did you make sure that your security software allows iTunes to contact Apple during the restore process? http://support.apple.com/kb/TS3125
-
My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years then I decided to update my iPhone 4S and it didn't recognize it or any other iPod or iPad.
Can someone please help ?I am having all sorts of problems with 9.1.1.Crashes and not only iTunes but I have to restart all the time.
GET TO WORK APPLE !!!!
Maybe you are looking for
-
Where can we validate the MANDT field in a database table.
Hi All, In any database table we will be having MANDT field. In the program while populating the table we never populate the field MANDT. But still in the database table, it automatically takes the current clinet number. Could any body tell me where
-
Ok so i've had this computer for a long time 5 years maby more than that. Its an hp pavillon dv6000 and it's been working perfectly since then. But i've gone on vacation and havent used it for a while. When i come back and turn it on its all perfect
-
Where can I find the Java Document of com.sap.aii.af.ra.ms.api.Message
Com.sap.aii.af.ra.ms.api.Message is class that would be used in Adapter Module development, but I found I can't find the document of it in neither Adapter Module related document nor XI Mapping related document. Anyone can help me?
-
HI, I M DOING JDBC - XI -FILE SCENARIO JDBC SENDER POLLS THE DATA BASE BUT ITS NOT POLLING THE DATA IN THE DATABASE.IN COMM CHANNEL MONITORING ITS SHOWING PROCESSING FINISHED SUCCESFULLY BUT THERE ARE NO MESSAGES SHOWN IN SXMB_MONI. PLZ HELP
-
If i lost all my movies how do i get them back
if i lost all my movies how do i get them back