BBM, whatapp + all net based functions are not working

I recently had a problem where the error message 40820 came up.
This resolved when I updated blackberry world by wifi and update my facebook and whatsapp apps.
Since then I can't log on to the internet via my blackberry net, I can't use bbm or facebook or whatsapp.
I am connected to 3g via o2.
I really confused as to how to resolve this problem? any ideas?
ps: I have switched my phone on and off to try and resolve the problem

Hi and Welcome to the Community!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider (O2) for formal support...after all, it is their network with which your BB is having trouble communicating...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

Satellite C660-17L - Some TouchPad functions are not working

My touch pad functions are not working:
- I can't use it to scroll up and down
- I can't use it to zoom.
What should I do to fix it?

Yes the model number is Satellite C660-17L
And no I didn't install the touchpad driver.
I Have had this laptop for less than a month, I started it one day and tried to scroll but it didn't work.
Also i tried to search for the advanced settings under the mouse option but I couldn't find it.
When I enter the search directly into the search bar, the mouse option comes up but when I click on it, it asks me if I want to uninstall the synaptics driver.
I have no idea what this means but I click no and it comes up with all the mouse setting options.
What should I do now?

9iAS java functions are not working

Dear All.
Im using oracle 9iAS Release 9.2.0.1.0 and JServer Release 9.2.0.1.0. Im using java functions (eg. Array, pop, push method and trim function) in my JavaScript section.
But these functions are not working. When run the page it work up to that function and stuck. Functions are written properly.
I would be much-appreciated .if you could help me to solve this problem..
Regards,
Nish

Are you sure you uncommented and changed jvm.include.CLASSPATH=1
in the jvm12.conf when you added your classpath there?
The preferred way to do this would be to create a .war and deploy it instead. Then you can put your beans in the WEB-INF/classes directory and the application wont have conflict problems if you decide to create virtual servers later.

All my GPS Apps are not working anymore after upgrading to OS4

Hi folks,
all my GPS APPS are not working anymore since I upgraded to OS4.
I am living in Germany and using Iphone 3GS 32GB.
Are there any plans from apple to resolve this issue shortly ß Or shuld we
chance to google or Microsoft produkts....?

I'm getting very interested in GPS problems across the entire iOS device range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

After upgraded ios6 i got problem with whatapp. "last seen" function is not working

HI eveyone
after upgraded ios6 i got problem with whatapp. "last seen" function is not working .. it's doest show last seen who enter the chat . is anyone have the same problem .. i even restore and reinstall to my ph but it's not work .. if someone know how to fix it, plz tell me how to do .. thanks

Also, when I check this post several times a day, I always see warning 'Connection is untrust'. If I close browser and reopen immediately everything is ok.

My copy and paste functions are not working, does anyone know why this might be happening?, my copy and paste functions are not working, does anyone know why this might be happening?

my copy and post functions are not working, does any one know why this may be happening and what I could do to fix it? Thanks!

Have you tried rebooting?

HT201441 this is bullshite again, i just updated the phone my partner gave me and now is locked and he doesn't remember ever using icloud and all my icloud accounts are not working, *** what's this now Apple ? good idea to secure us but seriously many wil

this is bullshite again, i just updated the phone my partner gave me and now is locked and he doesn't remember ever using icloud and all my icloud accounts are not working, *** what's this now Apple ? good idea to secure us but seriously many will have t

If your device is disabled...
Connect to your computer in recovery mode per the instructions in http://support.apple.com/kb/HT1212
You may need to do this more than once.

Mathscript all matlab functions are not working

Hello,
I am using mathscript node in my labview development. I have used right away "imfill" function to fill the holes in my edge detected image. But the "imfill" function is not working in mathscript.
How could I use this function in mathscript?
Attachments:
Candel.vi ‏96 KB

Did you take this code directly from MATLAB and put it in the MathScript node? (I'm guessing the imfill function is a MATLAB function?)
If so, you're going to be sorely dissapointed. While MATLAB and the MathScript node both use .m files, they are not the same language. The language is very similar, but the syntax differs slightly in some cases. My guess (since I've used MATLAB but never the imfill function) is that the imfill function is part of a toolkit for MATLAB. Unless the MathScript node has a corresponding function (you'd have to search the help to see) you will not be able to use this function in the MathScript node.
If the MathScript node has no corresponding function and you must use this function in LabVIEW, I would reccommend the MATLAB Script Node. This structure actually calls MATLAB through the ActiveX interface. This means that you must have MATLAB installed on the computer you are running your VI on.
Chris
Certified LabVIEW Architect
Certified TestStand Architect

Time series functions are not working in OBIEE for ESSBASE data source

Hi All,
I am facing a problem in OBIEE as I am getting error messages for measure columns with Time series functions(Ago,ToDate and PeriodRolling) in both RPD and Answers.
Error is "Target database does not support Ago operation".
But I am aware of OBIEE supports Time Series functions for Essbase data source.
using Hyperion 9.3.1 as data source and obiee 11.1.1.5.0 as reporting tool.
Appreciate your help.
Thanks,
Aravind

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

Time series functions are not working for fragmented logical table sources?

If i remove that fragmented logical table sources, then its working fine.
if any body know the reason, please let me know.
thanks and regards,
krishna

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

Saved Shopping Cart Display/Edit functions are not working

Hello SRM experts,
The problem that I have is that the buttons like Display, Edit, etc are not working on a saved Shopping Cart. What is the best way to debug this problem? How would I find out what methods are being called on the SRM system or if some entries are missing in some table for BUS2121?
We are on SRM 7.0 PPS SPS 5, Portal 7.01 SPS 5.0.
Thanks,
Mani

Hi Mani,
We are also facing a similar issue. Our protocol is HTTP throughout but still the issue persists.
Can you shed some light on any other config that you changed?
Regards,
Nikhil

Key functions are not working in oracle11g forms

I have migrated a oracle 10g form to oracle 11g form
1.Key function such as down arrow,up-arrow is not working in oracle11g forms though key-down etc trigger have been written.
2.Tree node function,i mean when i try to call form from a child node ,it required 4-5 click.
Can anyone help me for these issue

Next_form function is not working.i have copied the .res file from 10g.So the issue like this,when i master forms calls(by using open_form in when-window-activate trigger)to a child form and the child form having (when-window-activate trigger)next_form to return the cursor in the master form,it got hang in 11g.This is problem.i have checked by creating the same.Could you help me for the same.this code is running fine in 10g.

Two Exact Functions Are Not Working (long)

I am making a portfolio website. The way I have structured my code is that I have an action layer that takes care of global actions such as how the user would navigate through the website. For each page of the website, I would have a seperate layer that would load the content of that page onto the screen. The content would be added as a movie clip which is attached to a scroll pane component.
I am having trouble calling one of my functions. What I am trying to do is that when the user navigates to 'My Work' section of my website, they can select from one of the examples of my works. Doing so will pop-up a movie clip which will display photographs and provide an explanation for my work. The problem I am trying to fix is that when the user tries to navigate to another page on my portfolio, the pop-up will not remove itself. I have created a function which is attached to the close button so if the user presses it, they can manually close the pop-up movie clip. I have also tried using this closing function with the main navigation buttons of my website so that when the user tries to go to another secion of the website with the pop-up open, the pop-up will automatically close itself, however, it is not constantly working. My 'works' page is seperated into several catagories (web, graphics...). This auto close function is only working on one of the five catagories and I do not understand why. I have copied everything exactly for one catagory to the second catagory, but Flash keeps on giving me the error that "Error #1009: Cannot access a property or method of a null object reference".
My flash files can be downloaded here. Once downloaded, you would want to open up website14.fla. I know my coding is not exactly organized, and I am sorry as this is my first time I have really used a lot of ActionScript at once. I'll try my best to walk you guys through my coding to my error.
To navigate through my website, you would click on the sink, toilet, or shower handles X amount of times. 1 time would bring you to 'about me', 2 for 'resume', 3 for 'contact', and 4 for 'work'. Once on the work page (press 4 times), click on the 'web' catagory and select one of the thumbnails. A pop-up window will appear. Don't close the pop-up window, and instead navigate to another page by pressing one of the handes a few times. Notice that the pop-up window automatically closes itself. Now navigate back to the 'work' page, click on the 'graphics' catagory and select a thumbnail. Now navigate to another page by pressing the handles a few times. Notice how Flash produces the error 'Error #1009: Cannot access a property or method of a null object reference'. In addition, notice how the pop-up window doesn't dissapear, and the new page is layed overtop.
To navigate in the Flash file to my error, I'll try to guide you there. In the root timeline, scroll over to Frame 1 Layer 'Action' and look at the actions panel. On line 72, I have two If statements checking for frames 30 and 31. These two frames are where my work is displayed. I have also used a try/catch statement to check for errors. Now going to frames 30 and 31 and clicking on the workContent layer and looking into the actions panel, I am bringing my movie clip onto the stage by using the function createScrollPane. The function createScrollPane is located in frame 1 in the Action layer on line 13. This function just takes the movie clip and wraps the scroll pane component around it. Going to frame 31 on the main timeline, select the workContent layer and pull up the actions panel to see the code. you will see that I am loading workGraphics_content movie clip onto the page. Find it in the library (content/content/workGraphics_content) and open it by double clicking on it. There you will see another movie clip (workGraphics_content2) fading from alpha0 to alpha1. Double click on it and look at the action script in frame one layer 'action'. On line 93, I have the function external_workFrame_exit which is called whenever the user navigates from the 'work' page to another page on the website. For some reason, Flash keeps on giving me an error whenever that function is called. Oddly enough if you scroll up to line 78 you will see the function workFrame_exit which is none the less exactly the same as external_workFrame_exit. workFrame_exit is called when the user manually clicks the closing X button on the pop-up window to close it. If you want, you can open up another movie clip (content/content/workWeb_content) and double click on that movie clip to open up workWeb_content2 and take a look at its action. Looking on line 86, I have the external_workFrame_exit function and this one is the exact same one as the external_workFrame_exit function (which works fine) found in workGraphics_content2.
What I am confused about is how I have two exact functions being called in pretty much exact same situations in the exact same way, and one of them fails to work. Is there a solution to my problem? Feel free to ask any questions if any of my explanations were difficult to follow.
Again, the flash files can be downloaded here. Once downloaded, you would want to open up website14.fla.

Sorry about the long post. I just thought that I would include all the details. To sum things up:
You navigate through my website by clicking the sink, toilet, and shower handle X amount of times. By clicking it 4 times you will end up on my 'work' page. My 'work' page has several categories. Select the 'graphics' category, click on one of the thumb nails and a pop-up will appear. Now navigate to another page without closing the pop-up by clicking on the handles. Notice how the pop-up doesn't go away, and the new content is displayed over top? Now if you go back to my 'works' page and click on one of the thumb nails under the 'web' category, then navigate to another page, notice how this pop-up goes away.
I am using the exact same functions to make both the 'graphics' category and the 'web' category to go away, but for some reason the 'graphics' one is not working.
Again, you can download my files from here.

After updating to V 15.0 I have the issue that suddenly many but not all of the functions do not work anymore. Menues and download links do not work.

I have updated my firefox to version 15.0. After this I have the effect that at some unspecified time during use many of the functions stop working. Menu's do not open, download links do not work anymore and so on. Opening new tab's or windows still works. Links on pages partly work partly not. Copy and paste does not work anymore on webpages. It takes ending the firefox process and restarting to correct the issue until it happens again. I have those effects on totally different webpages. At this time it happens every time after I start Firefox but not right away. Firefox first works for some time and then it suddenly doesn't anymore without me having done anything special

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

BBM, whatapp + all net based functions are not working

Similar Messages

Maybe you are looking for