BBP_EXTREQ_TRANSFER error:Entries stuck in queue

Hi all,
We are running on SRM 5.0.I am executing the report BBP_EXTREQ_TRANSFER for transferring the PR's from R/3 into SRM Sourcing cockpit but the entries are getting stuck into the outbound queue in R/3.I am getting the error as SYSFAIL-"Exception condition "OBJECT_ID_NOT_FOUND" raised."
I have made all the relevant settings in R/3 as well as SRM but no success.Anybody any suggestions?
BR,
Disha.

Hello Disha,
Please check the RFC user should be in the PPOMA structure and should have attributes.
Also check the responsibility tab in the local purchasing group.
Looks like this.
+ Local Purchasing Org
--+ Local Purchasing group
+ External Unit
--+ RFC user
Regards,
Masa
Message was edited by:
Masayuki Sekihara

Similar Messages

Error printing - stuck in queue

Every time i print my status indicates it is printing but then says printer error - stuck in queue. When I press fix it deletes it but next time I try to print it does the same. It can find the printer on the network it just won't send it to the printer. What can I do?

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - wired LAN, Wireless LAN, bluetooth?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

ERROR : Entries for application 13 still exist in the extraction queue -

Hi everybody,
While modifying extractor (LO Cokpit) I am getting this error.. I have deleted data through t.code LBWQ & LBWG still I am getting this ERROR,
" Entries for application 13 still exist in the extraction queue -> "
and it is givig the Diagnosis as below
Diagnosis
You are not allowed to change the extract structure MC13VD0ITM forapplication 13. This is because unprocessed entries are still presentin an extraction queue of application 13 for at least one client.
If an extraction structure is changed for which there are still openentries in an extraction queue, these entries can no longer be read andthe collective update terminates.
Please help me out..it is urgent...
Thanks in advance

Hi Sunita,
Do one things, to fix this problem, go to the BW for that info package, it seems
its already exists..if yes..delete the initialization request from the package
and come back to R/3 try to delete the application 13 and it will allow to make
the changes to the struc.
Hope it helps..
Need further help revert..
Assign points if useful..
Cheers,
Pattan.

BPM: Message Stucked in Queue on Error even after Cancel Process

Hi all,
We have a scenario where we are using BPM to call RFCs in sequence using BPM. In case of exception, we make use of exception branch and canel the process. But even after doing so, failed messages are stucked in queue and if a new message comes in, it goes in pending status due to previous stucked messages.
Can anybody please suggest how to overcome this.
Thanks
-Kulwant

You need to make sure that:
1) You have defined a Exception Handler in your Block
2) You have included this in the Exception Branch properties.
3) You have included this under the Exceptions section of your Sync Send Step....
Even I got into the same situation and then figured out that F7 mentioned Exception will never be raised....why??.....the 3rd point was the reason.....check if same applicable to your case also...
Regards,
Abhishek.

BD87 hide "idoc entries in tRFC queue" by assigning to status or other meth

Hi,
I am working on the inbound side of an idoc interface for message type MATMAS. My problem is that when I enter in BD87 there are more than 400 hundred entries in "idoc entries in tRFC queue". Now, whatever filter I put on the first screen this line appears. Even, if I enter with a specific idoc number. These entries are obviously outbound errors and are completely irrelevant to the interface I am working on but will make the reprocessing screen unnecessarily complicated for the users. So, basically I want to allow the end user to filter out these messages.
I noticed that the errors "idoc entries in tRFC queue" aren't associated to a status and I was wondering if it is possible to give them a status value and so make them sensitive to a status filter. But if this isn't possible any solution to hide these error messages from the end user would be equally valid.
I know someone will probably suggest that the best solution would be to remove all old entries from tRFC queue in SM58 and that there shouldn't be so many idoc in entries in the tRFC queue. The problem is that it is not my role to monitor tRFC in production and if it has not been regularly monitored up to now then it probably won't be in the future.
Many thanks in advance,
Jamie.

Hi Jamie,
To the best of my knowledge the shown outbound RFC entries in BD87 are a feature that cannot be suppressed. I.e. in the coding of BD87 one can see logic where it automatically checks for outbound RFC errors and adds those to the output.
In general IDoc status 03 should be associated with the outbound RFC errors. Yet, when one sees those in BD87, the IDoc status field is empty. Along your train of thought I had also previously tried to suppress those displayed IDocs by adding a filter for suppressing status 03 or blank status, but nothing helps. And as you correctly point out, even when using BD87 on a single IDoc (e.g. specified via IDoc number), the transaction will still display the outbound RFC errors.
So unless somebody else has some good idea or insight, I'm afraid you're stuck with that behavior.
Cheers, harald

Mails/Alerts-triggered for messages stuck in queues and failed in moni

Hi,
I have two doubts.
1) Messages are getting stuck in smq2 of my ECC and PI system. I have to manually push them. Is there any mechanism in which we can get alerts/mails when messages get stuck in queues.
I have already gone through the blog /people/santhosh.kumarv/blog/2009/05/19/sap-xipi-alerts-for-queue-errors and I have implemented it in ECC system. But no mails were generated.
2)Is there any method in which I can get alerts/mails when a message fails in sxmb_moni of ECC system?
Thanks and regards,
Siji

Hi Sanjeev,
I made a report with the following code in it and executed it. So I think that should work even if the job for it is not scheduled. There were messages stuck in queue. But no alert was generated. I had also created alert category in ECC.
Thanks and regards,
Siji

BPM: Messages stuck in Queue

Hi All,
I am working on BPM scenario. My scenario is I am collecting 100 messages in 10 mins and sending to receiver. Here correlation I used as constant. In my deadline step I am using Transform step and Send why because if my scenario collect 10 messages in 10 mins even though i have to send these 10 messages to receiver. Itu2019s same as BpmPatternCollectTime but only difference is in Deadline I kept Transform and send step and the correlation is u2018constantu2019.
My scenario is working fine most of the time. Sometimes messages are getting stuck in queue. The System error it is displaying as u201CProcess definition WS90XXXXX contains no receive step for message XXXX_PROXY_.....
Can you please let me know why the messages are getting stuck in queue?
Thanks & Regards,
Purushotham

Hi,
A message normally gets stuck in a Queue beoz it is waiting for some processing to happen...once this message gets stuck the remaining messages will also get stuck no matter even if you create the whole BPM again.
The only thing you can ensure is that all the messages are processed successfully before any other message enters the same queue....As of now you can only delete the queue and let the further processing happen successfully...is your Queue being used by some other processess also? If yes then check for their message processing...
@Divya....your answer seems to be a straight forward Ctrl C --> Ctrl V
Re: ccBPM Receive Step not Working
If not then I am surprised by such a level of coincidence...
Regards,
Abhishek.

Messages stuck in queues

Hi Gurus,
I used outbound and inbound proxies to send messages from SAP ECC system to PI system.
I often see that the messages are stuck in queues in SAP ECC system.
When I check SMQ2 to check the list of error which is causing the message to stuck in queue, the following error is thrown.
XI Error CLIENT_RECEIVE_FAILED.INTERNAL: Queue stopped.
What could be the reason for this.
There are hundreds of messges getting processed in queues but if one message is stuck in queue all teh following messages are also stuck in queue.
Can you please suggest how to handle the queues in SAP ECC and SAP PI system and why the error CLIENT_RECEIVE_FAILED.INTERNAL: Queue stopped is thrown in queues
Any help appreciated.
Thanks,
Jay.

Some more reference
Introduction to queues: [http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0647143550DB01673835744040254469End?blog=/pub/wlg/2957|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0647143550DB01673835744040254469End?blog=/pub/wlg/2957]
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0647143550DB01673835744040254469End?blog=/pub/wlg/13748|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0647143550DB01673835744040254469End?blog=/pub/wlg/13748]
Mapping related: [http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0647143550DB01673835744040254469End?blog=/pub/wlg/1832|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0647143550DB01673835744040254469End?blog=/pub/wlg/1832]-
QUEUE
PI - Queues
regards

Messages stuck in Queue in production Enviorment

HI ALL,
My messages is been stuck in queue in production envoirment. I have checked in SMQ2 Inbound queue .there in status it is showing SYSFAIL.When i am dbclick on stauts it is showing XI error due JCO communication failure.Mapping Queue..
I am trying to restart thoose messages but are not getting started . what I need to do. Shall I deleted those queues in in SMQ2 or unlock and then restart them.
Note : this is Production Enviorment ...........is right to delete the queue there while they are showing SYSFAIL status.
Please suggest.
Regards

Hi gangadhar kh
just few checks
1) inside the queue check if any message got stuck due to some error . if QOS for that message is EOIO then it will not allow other messages to process until this is not processed
process that and rest message will get processed
2) ask you basis team to update java kernel so that on production system this queue stuck problem should not happen frequently
3) to restart java stack
run tcode SMICM go to menu bar click on AS Java menu ->send soft shut down->with restart
after some time java services will up
then manually reastrat aal the message
Regards
sandeep

Messages Stuck in Queue in PI

Hi,
For a few inbound interfaces for which PI is the middleware, we have found that the messages are stuck in queue in PI. We have also found that the messages are stuck in the queue in PI because one message which has an RFC error (It does a RFC lookup from PI into R/3).
Is there any way in which we can trigger the RFC lookup manually for the failed message in the queue in PI?
If this is not the right forum, please let me know the correct forum.
Thanks in advance.
Mick

Hi,
We can prevent this problem through standard SAP program RSQIWKEX. This program need to execute background. Whenever any message stuck in queue automatically this problem will restart error message automatically. If you want to delete error message from queue (due to this error message remaining messages are in hold stage. for remaining message execution we need to delete error message from queue) we need to change one function in this probem.
Existing function TRFC_QIN_RESET_LUW , this function only can restart error message.
Need to add function TRFC_QIN_DELETE_LUW , this function delete error message from queue.
For this program execution we need to mentioned queue name(mandatory), find message stucking queue name and give same name to program in variant.
I hope now clear

Message stuck in queue - Rejected by server

Okay, so I thought was being smart by trying to set up my companies email on my own. When I entered all of the information (which I made mistakes) I tried to send a test message. Of course it would not go through and was being rejected by my companies server. So I deleted the email account I created on iphone. However, the test email I sent remained in queue and kept trying to resend over and over getting the same error/rejection message from companies email. Since there is no sent box (on .MAC anyway)there was no way to erase the test message stuck in queue.
Solution: Since I currently have two email accounts .MAC and Yahoo, I just tured off the .MAC and all of a sudden I hear the SHOOOWWWSHHHH. The test message stuck in queue was sent from the yahoo account. (after I confirmed the message was sent, I turned on hte .MAC email account again)
Now I know this solution is purely dumb luck and playing around with settings, but just incase it happens to you, this was how I solved it.

Hey, thanks for that! It is very intersting to see how that works. Looks like the outgoing mail queue can change "on demand", like when you left only one account active. This means that the ability to send emails from any of the accounts regardless of where it came in is just a programming step away...

Wrong Entries in Out-Queues

Dear All,
we've got a very big problem in oure CRM Mobiles Sales 3.0. In the Out-Queues we've got wrong entries, which have other Queue-ID's than they expecet to have but they've got the same transaction-ID.
When the clients now try to make conntrans, they get an error message: Internal error in incomming datastream.
Is there any report to clean up the Out-Queues, and fix the problem?
If you know a solution for this problem, please let me know.
Best regards
Christian Rodemeister

Hi there,
I think I have to get a little more detailed.
We have about 300 clients and nearly everyone has got about 2 till 20 wrong entries in his queue.
If we delete all queues this will took about 3 days and afterwards, if then everything on the system is still OK, the extract of all queues will took us about 5-6 days.
What I need is a solution and a reason why these wrong entries occured.
Why is it possible that an entry for another queue exists with a doubled transaction ID in a queue of another client.
If you have any idear please let me know.
Thanks a lot for your help, and all usefull ideas.
Christian

Records stuck in Queues

We are developing an application that will use Service Broker for message delivery. Everything seems to be working correctly, but during development we experienced multiple instances where messages got stuck in either the transmission or receive queues.
What could be causing this? If they continue to get stuck in the transmission queue during production, do you have any suggestions for preventing and/or clearing the stuck records in this queue? I added the following code to reprocess the transmission queue but
have not gotten any stuck records during testing to verify that the code works.
SELECT@int_TransQ_Count=COUNT(*)
FROM
sys.transmission_queue
IF@int_TransQ_Count>0
BEGIN;
DELETE@t_receive;
INSERT@t_receive(
        queuing_order
        ,message_body
,conv_handle
SELECT message_sequence_number
      ,message_body
           ,conversation_handle
FROM
sys.transmission_queue;
SELECT
TOP1
@nstr_conversation_handle=CAST([conversation_handle]asnvarchar(128))
FROM
[sys].[transmission_queue];
SELECT@nstr_SQLStatement=N'END
CONVERSATION '''+@nstr_conversation_handle+
''' with cleanup;';
EXECSPCTR_ADMIN.dbo.sp_executesql@nstr_SQLStatement;
GOTOREPROCESS;
END;

Hello,
1. In order to find the reason cause the stuck records in queues, you can use ssbdiagnose utility analyzes whether errors are preventing messages from being successfully transmitted between services. Or you can query the DMV sys.transmission_queue system
view in database to see whether there are error messages in the queue.
Reference:
http://technet.microsoft.com/en-us/library/bb522922(v=sql.105).aspx
http://rusanu.com/2007/12/03/resending-messages/
2. Using End Conversation With CleanUp will immediately removes all messages from the service queue and the transmission queue.If you want to clear all messages in all the queues in a database,then you can try to use ALTER DATABASE ... SET NEW_BROKER WITH
ROLLBACK IMMEDIATE.
The following thread is about similar requirement, please refer to:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/9aa98ed7-c1df-4e7d-b89b-1d875088628a/how-to-delete-rows-from-queues?forum=sqlservicebroker
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Email not sent with entry not in queue status in SOST

Hi,
I've used SO_DOCUMENT_SEND_API1 FM to send PDF file of SAPScript. However, the mail is not sent to the recipient and the status of the mail in SOST is "Entry not in queue".
Ive debug the program and the the sy-subrc of the FM is 0, and there goes the confusion... Why was it not sent to the recipient when the FM doesnt record any error?
Please help...
Rgds,
Mark

Hi,
If it works add this piece of code after ur FM..
If sy-subrc eq 0.
commit-work.
wait up to 1 seconds.
submit rsconn01 with mode 'INT' and return.
endif.
Cheers,
jose.

Mails stuck in queue when Automatic Replies are enabled

We have a new Exchange 2013 server and moved a few pilot users from the 2010 environment to it.
Everything seems to work OK but we just encountered a strange issue. One of the users turned on his automatic out of office replies and when people send E-mail to his mailbox they receive a 'Delivery delayed' e-mail. All mails to this account seem to be
stuck in the queue (shown in the Exchange Toolbox – Queue viewer) but they DO actually arrive in his Outlook.
The error message in the queue for his messages is: Recipients: [email protected];3;3;[{LRT=};{LED=432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]};{FQDN=};
After turning off his out of office replies, the queue emptied instantly, and no duplicate mails arrived in his mailbox. After turning it back on the queue started filling up again with new mails.
Other pilot users have the same issue.
Has anybody seen this issue before? I checked space on the drives and there seems to be no issue there (so no back pressure issue).
thanks!

We opened a case with Microsoft support. It took a few weeks for them to find what was causing this issue. I will just copy/paste the summary they gave us.
Reason:
So the error was thrown by the Transport Service when we are trying to submit the mail.
We also compared the difference between earlier version and CU5 and found “XORIGFROM=[email protected]” is the difference, we started using XORIGFROM verb from CU5.
We did further analysis and found During SMTP Session, we check if the XOrigFrom argument is allowed according to EHLO, capabilities and permissions.
While checking this permission, we check if the session has permission to accept organization headers, and this is where we are failing.
# we checked the effective permission for "Mailservername" on Default receive connector and found that we had "deny" permission on: Accept Organization headers
# We also found that the security group "Exchangelegacyinterop" had deny permission for "accept organization headers" on the default receive connector
# We found that the Exchange server "Mailservername" was a member of "Exchangelegacyinterop"
# So we removed the "Exchangelegacyinterop" and added the "Mailservername"
# we gave "Allow" permission on "Accept organization headers"
# we restarted the MSExchange Transport service
# We sent an test email to the OOF enable mailbox
# we found that we got the OOF reply and also the email did not stuck in the queue
# Issue resolved

BBP_EXTREQ_TRANSFER error:Entries stuck in queue

Similar Messages

Maybe you are looking for