BBP_EXTREQ_TRANSFER - SYSFAIL

Hi everyone,
I've been having problems when I try to synchronize PR's from ECC to SRM 4.0 using BBP_EXTREQ_TRANSFER. The queue status is SYSFAIL and the message is Exception condition "OBJECT_ID_NOT_FOUND" raised.
I've checked SLG1 in SRM and there's nothing there.
In transaction ST22 there is a RAISE_EXCEPTION in program SAPLBBP_ATTR_PDORG - form "map_object" (line 34).
PPOMA settings seem to be ok (I've done all settings that were recomended in other threads).
I've had no problems in transaction R3AS with:
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
MATERIAL
SERVICE_MASTER
Our Production SRM content was copied into QA, which demanded some re-configuring. There could be something missing related to that...
Any hints?
Thanks in advance,
Henrique

Hi,
The PR is in EPRTRANS table, with field TRANSSTAT = 2 and EPROFILE = 01. The RFC user has profiles SAP_ALL and SAP_NEW.
SMQ1 (in ECC) is always emptied before the attempt to synchronize and so is SMQ2 (in SRM).
Local Purchasing Organization as well as local Purchasing Group are properly defined in PPOMA, with the tab Function pointing these groups to the SRM logical system (since they are local). The groups also have required attributes set.
The RFC user is correctly integrated into the Org. Model.
I've checked transaction 'comm_hierarchy' in SRM and there are 3 categories (under R3MATCLASS):
- R3MATCLASSQRM200
- R3MATCLASSQAS-100
- R3MATCLASSQAS-200.
I want to delete the last one but it says I can only do it in ECC QAS. I went to the same transaction in ECC but there was nothing there.
Could this be the problem? What should I do about it?
Regards,
Henrique
Message was edited by:
Henrique Hermont

Similar Messages

BBP_EXTREQ_TRANSFER fails if SMQ2 or SMQ1 Queues have errors

We are using the standard functionality to send Plant Maintenance Orders from R/3 to SRM. Our current landscape is SRM 5.0 and R/3 4.6C. When the queues SMQ1 (Outbound R/3 Queue) or SMQ2 (Inbound SRM) Queues have other errors, not related to external requirements (e.g. , READ_OBJCL), the external requirements fail. If we clear out both queues this works. Are others having this same problem? If so, how do you handle this in production? What do you use to monitor these queues?
Any help you could provide would be greatly appreciated.
Sabina McLaughlin

Hi Sabina,
Errors in BBP_EXTREQ_TRANSFER should not happen.
If You want, You may write simple report using table ARFCSSTATE.
This table contains all entries of qRFC. Use ARFCSTATE = 'SYSFAIL' and 'ARFCNAM = 'BBP_EXTREQ_TRANSFER' to check errors in transfer.
Regards,
Marcin Gajewski

Error RFC queue with BBP_EXTREQ_TRANSFER

Hi Experts,
We are implementing SRM 7.02 with Classic scenario
The Purchase requisitions are created in ERP and transfer to SRM with BBP_EXTREQ_TRANSFER
When checking RFC queue with SMQ1 the status is SYSFAIL "Exception condition "OBJECT_ID_NOT_FOUND" raised"
Any ideas?
Clara

Hello Clara,
First, PR is released totally and you have set in the input fields of BBP_EXTREQ_TRANSFER, the PR number and date 31.12.9999, then all standard parameters.
Also, have you created correctly the entry channel pending of Root node in PPOMA_BBP trx?, also you need to add * to BSA, BWA and DP_PROCTYPE attributes; and add your RFCUSER in this tree.
We was attemping that issue when deploying PDP.
Is there any reason you should use PDP instead of CPPR? Do you have PI?
I strongly recommend you to use PDP if you want to use service hierarchies in SAP SRM with classic scenario.
Regards,
Sebastián

BBP_EXTREQ_TRANSFER error:Entries stuck in queue

Hi all,
   We are running on SRM 5.0.I am executing the report BBP_EXTREQ_TRANSFER for transferring the PR's from R/3 into SRM Sourcing cockpit but the entries are getting stuck into the outbound queue in R/3.I am getting the error as SYSFAIL-"Exception condition "OBJECT_ID_NOT_FOUND" raised."
   I have made all the relevant settings in R/3 as well as SRM but no success.Anybody any suggestions?
BR,
Disha.

Hello Disha,
Please check the RFC user should be in the PPOMA structure and should have attributes.
Also check the responsibility tab in the local purchasing group.
Looks like this.
+ Local Purchasing Org
--+ Local Purchasing group
+ External Unit
--+ RFC user
Regards,
Masa
Message was edited by:
        Masayuki Sekihara

Erro de SYSFAIL e Queda do Ambiente JAVA (PI)

Bom Dia
Estou num projeto de NFe e atualmente esta acontecendo o seguinte cenário de Erros:
    Na SMQ2 , quando apresenta um aumento nas filas de Mensagens , aparece SYSFAIL em determinadas Filas , todas as outras travam , aumenta o numero de Filas.
   Com essa mensagem de SYSFAIL nas filas , o serve0 (Parte JAVA do PI) cai e após isso estou tendo que efetuar manualmente um STOP/START em todos os canais de comunnicação para que os R/3 voltem a emitir NFe.
    Isso esta ocorrendo com mais frequência após inserir uma nova empresa para emissão de NFe.
    Alguem poderia me ajudar a entender por que ocorre o SYSFAIL as mensagens travam e derruba o ambiente JAVA ?
Sérgio.

1º) Erro: Commit Fault: com.sap.aii.af.rfc.afcommunication.RfcAFWException:SenderA
2º) Foi alterado o numero de Filas O numero de Filas foi alterado , mas não consigo ver esse parametros na RZ10 , tem 3 entradas : X32_DVEBMGS32_NFISAP ; DEFAULT ; START_DVEBMGS32_NFISAP nessa transação ...onde eu vejo isso
3º) Esse parametro não tem nessa transação (/usr/sap//DVEBMGS00/j2ee/cluster/server0/log/). em qual desses diretórios abaixo eu encontro esse parametro ?
Existe esses:
DIR_ATRA      /usr/sap/X32/DVEBMGS32/data
DIR_BINARY      /usr/sap/X32/DVEBMGS32/exe
DIR_CCMS      /usr/sap/ccms
DIR_CT_LOGGIN    /usr/sap/X32/SYS/global
DIR_CT_RUN              /usr/sap/X32/SYS/exe/run
DIR_DATA              /usr/sap/X32/DVEBMGS32/data
DIR_DBMS              /usr/sap/X32/SYS/SAPDB
DIR_EXECUTABLE /usr/sap/X32/DVEBMGS32/exe
DIR_EXE_ROOT     /usr/sap/X32/SYS/exe
DIR_GEN              /usr/sap/X32/SYS/gen/dbg
DIR_GEN_ROOT    /usr/sap/X32/SYS/gen
DIR_GLOBAL        /usr/sap/X32/SYS/global
DIR_GRAPH_EXE /usr/sap/X32/DVEBMGS32/exe
DIR_GRAPH_LIB   /usr/sap/X32/DVEBMGS32/exe
DIR_HOME             /usr/sap/X32/DVEBMGS32/work
DIR_INSTALL        /usr/sap/X32/SYS
DIR_INSTANCE     /usr/sap/X32/DVEBMGS32
DIR_LIBRARY      /usr/sap/X32/DVEBMGS32/exe
DIR_LOGGING     /usr/sap/X32/DVEBMGS32/log
DIR_MEMORY_INSPECTOR   /usr/sap/X32/DVEBMGS32/data
DIR_ORAHOME       /oracle/X32/102_64
DIR_PAGING                            /usr/sap/X32/DVEBMGS32/data
DIR_PUT                            /usr/sap/X32/put
DIR_PERF                            /usr/sap/tmp
DIR_PROFILE      /usr/sap/X32/SYS/profile
DIR_PROTOKOLLS     /usr/sap/X32/DVEBMGS32/log
DIR_REORG                          /usr/sap/X32/DVEBMGS32/data
DIR_ROLL                          /usr/sap/X32/DVEBMGS32/data
DIR_RSYN                            /usr/sap/X32/DVEBMGS32/exe
DIR_SAPHOSTAGENT     /usr/sap/hostctrl
DIR_SAPUSERS     ./
DIR_SETUPS                           /usr/sap/X32/SYS/profile
DIR_SORTTMP     /usr/sap/X32/DVEBMGS32/data
DIR_SOURCE     /usr/sap/X32/SYS/src
DIR_TEMP                           /tmp
DIR_TRANS                           /usr/sap/trans
DIR_TRFILES                          /usr/sap/trans
DIR_TRSUB                          /usr/sap/trans

SYSFAIL Error in SMQ2 - Transfer of material from R/3 to CRM

Hi,
We are using standard BDOC to transfer material from R/3 to CRM. BDOC Type is PRODUCT_MAT, Queue name is R3AD_MATERIA<Material No>.
There are some queues which are struck in SMQ2. There are no struck queues in R/3. The struck queue has the status SYSFAIL and when I double click, it shows Message - Error in Mapping (Details: transaction SMW01)
I checked transaction - SMW01. The queue name which is in SYSFAIL status is not coming up in SMW01.
I do not understand whereelse I can see the detailed error message.
This error does not occur for all articles.
As I don't have sufficient knowledge in CRM and BDOCs, any pointers regarding the issue will be very much helpful.
Thanks and Regards,
Lakshmi

Hi Lakshmi,
Please follow as below:
SMWP-Middleware Monitoring Cockpit- This transaction gathers a wide set of information about the status of the Middleware & Downloads in both the CRM system, the R/3. All statuses should normally be green but there may be some circumstances which stop this occurring. Expand the section Generation Information which refers to the generation of BDoc Types. Where ever you see error you can right click and Select Analysis Tool then right click and check the error.The log shows the error.
SMQ2- Select a Queue and select Display. Queues connected to R/3 start with a queue name of R3A/D.
Double click on the Status field i.e SYSFAIL. Reason will be shown.In your case it is u201CError in Mapping (Details: transaction SMW01)u201D. Then Continue and select a queue and select Display.You can see the Individual BDocs are beoing displayed.
SMW01- give Bdoc Type as " Product_mat". If it is not displaying then I request you to check if all the objects are generated properly.This may also happen if the objects are not properly generated.Use tx-Genstatus. That will give you a list of error objects to be generated.
Regards...
Arup

BP Creation in CRM- Queues stuck in SMQ1 - SYSFAIL Status

Hi ,
When we create a BP in CRM , The BP Queues R3AUBUPA* has are stuck in SMQ1 in CRM with status SYSFAIL . The detailed Error description is " Function module "CRM_BUPA_BDOC_MAP_NUMRANGE" not found"
We have already maintained the following entry in table CRMC_BUT_CALL_FU in CRM with call indicator set.
Event Object Item FM
CRMIN BUPA 50000 CRM_BUPA_BDOC_MAP_NUMRANGE
Do we need to maintain this FM somewhere else?
Help us to solve this issue.
Regards,
Shaik

hi Shaik
How did you solved this

Error while restarting BPM which falied in Queue & status is sysfail

hi all,
We are trying to restart the BPM which failed with status as SYSFAIL using 'Execute LUW'.
Error coming is 'Function module does not exist or EXCEPTION raised'
How can we restart such messages?
Thanks,
Mayank

Hi Mayank,
i think if there is an error occured in the BPE processing then you might have to restart that work item from SXMB_MONI_BPE.
so in SXMB_MONI_BPE-continue process following error, check if the integration process is having error in any of the steps and restart it if possible. Afterwards we would be able to restart the BPM queue from SMQ2.
regards,
francis

Sysfail status in SMQ1

Hi
I have sysfail error in tRFC and qRFC (SM58 and SMQ1) Error message with function module not found and exception raised .Scenario is from ECC-XI-Third party system.
Checked for dumps in SAP XI where in I could get the following message " Error in ABAP Program "SAPMSSY1"and the program is terminated Probably due to an error in program .this is a standard Program and moreover this interface has run successful till april end
Please let me know your suggestions to clear off the sysfail status

Hi
check the reply of Rob at this thread regarding error with SAPMSSY1 program
Re: ABAP statement RSYN
Regards
Abhishek

SMQ2: SYSFAIL Comparison error during the execution of a simple

Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Messages><Message1/></Messages>
In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1></ns0:Message1></ns0:Messages>
Thanks for your help, best regards, Martin

You seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek.

Queue SYSFAIL after message split "Whole number overflow on addition"

Hi,
I'm using a message mapping in PI 7.1 to split a message in several messages for each line of an invoice. It's a mapping 1 to 0..n. Everything went well since I had maximum 100 invoice lines to split (then 100 messages at the output of the mapping).
But since I have now messages with 200 invoice lines, everytime the queue is stopped in SYSFAIL status with a message "Whole number overflow on addition". But all messages are processed even if the queue is stopped.
ST22 gives me a COMPUTE_INT_PLUS_OVERFLOW in the method determin_message_size. It seams that PI doen't support a large message at output of a mapping. How can I split the message into multple messages at the outplut of a message mapping ?
Does anyone have a solution ?

Hi,
I guess you can use the Message Packing feature.
See below the links to help you:
http://help.sap.com/saphelp_nwpi711/helpdata/en/46/7ef9124f176be3e10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/46/7a6e3469454b2be10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/46/79e8e13872275ae10000000a11466f/frameset.htm
Regards,
Caio Cagnani

XBTM* queue with sysfail as the FM: SXMS_ASYNC_EXEC failing.

Hi All,
We have a landscape that includes two PI systems between the SAP system and the legacy systems. We received a large message of around 85MB from the legacy system through HTTP adapter. This message was transformed and processed successfully from the 1st PI system in about 1 and half hour time and sent to the 2nd PI system using XI adapter. This PI system contains no Mapping for this interface and just needs to deliver the numerous IDOCs in the payload to the SAP System.
The message size in the second PI system is still 84 MB but the message is stuck in SMQ2 queue XBTM0000 as sysfail with the status text :" Time limit exceeded." as the FM: SXMS_ASYNC_EXEC failing.
We have tried to De register, Register and activating the queue and also executing LUW, but the problem exists.
Any valuable inputs in this regards will be highly appreciated.
Thanks alot in advance.
Regards,
Rahul

Hi Rahul,
As you have already tried de-registering and registering the queue, I can't think of anything else apart from sizing. Try applying the sizing guide to see if that helps.
Regards,
Ramesh.

SYSFAIL issue

Hi All,
I am getting 'SYSFAIL' error in SMQ2 transaction.How to fix it and what is the solution for that?
Appreciate your quick response...
Thanks,
Kiran

Hi Kiran,
The SYSFAIL in SMQ2 you are having is due to the CUSTOMER 500123. To know more details about what is wrong this customer go to TCODE:SMW01 enter the following information:
-> 'BDoc Type' - BUPA_MAIN
-> 'Send Date and Time' -> select 'Other Selection' - enter the 'From Date' - 21.02.08
Now execute and look for the customer number 500123 from the BDOC. Highlight that customer and click on the icon that says 'Show Bdoc Msg Errors/Receivers'. THis will give you exact error why the customer is failing.
Hope this helps you.
Thanks,
Karuna.

CRM SYSFAIL - Error when decompressing during Import

Hi All,
We are getting error in SMQ2   "Error when decompressing during Import"
in Function module BAPI_CRM_SAVE and status is SYSFAIL. We are having CRM 4.0 and patch level 7.
Please see the source code extract
001920   ********************************************************************
001930   * define a little macro to add a table name to l_t_tables
001940     DEFINE lmacro_add_import_table.
001950       l_t_tables-name = 'T_&1&2&3&4'.
001960       l_t_tables-itabname = 'C_S_BLOCK-T_&1&2&3&4'.
001970       append l_t_tables.
001980     END-OF-DEFINITION.
001990   * define which tables have to be imported
002000     macro_execute: lmacro_add_import_table.
002010     lmacro_add_import_table:
002020       m h d r,
002030       p a r 1,
002040       p a r 2.
002050   * carry out the IMPORT statement to decompress data
     >     IMPORT             (l_t_tables)
002070       FROM DATABASE    baldat(al)
002080       ID               i_s_ldat-log_handle
002090       USING            baldat_import
002100       IGNORING CONVERSION ERRORS.
002110
002120   ENDFORM.                    "log_block_decompress
Thanks & Regards
Sujith

Hi Andersen,
You should be a system administrator to do above task.
Deepak Jangra

Error in CRM Middleware- SMQ2-Sysfail-Message 999999.

Dear All,
I have a problem of one of the queues(in SMQ2-inbount) in CRM 5.0 is struck with SYSFAIL error.
The queue name is R3AI_DNL_COND_A005.
When I double click the queue entry I get an Error: Message No 999999. Log directory is full.
Even reseting the status does not work.
Please help.
Regards,
Rajeet.

Hi.
I have checked the tablespace of SMWBDOC, its just 79% full. Lots remaining. Will check out for the IPC log directory.
What could be the other reason, have searched for this error message in SDN/SAP service, but no success.
I have even tried to reset the status, but it again gives the same error.
Please help.
Regards,
Raj.

BBP_EXTREQ_TRANSFER - SYSFAIL

Similar Messages

Maybe you are looking for