BBP_XPRA_ORGEH_TO_VENDOR_GROUP not functioning as it should for conversion

Hi Gurus
Am having a very serious issues similar to the ones faced by you for the program BBP_XPRA_ORGEH_TO_VENDOR_GROUP
The first issue is that the conversion program does not run 100% successful, not all vendors are carried forward
Also am not sure in what check mode to run the program 1-9, currently I ran it with 9
Is there a set way to doing this to ensure that all the vendors that were present in the EBP 3.5 system get carried over to EBP 5.5. system under the transaction PPOMV_BBP
It would be of great help if someoneu2019s got the answer to this.
Regards
Tridip

Hi
Note 917536 - BBP_XPRA_ORGEH_TO_VENDOR_GROUP: Problem with
check mode 9
Note 928881 - BBP_XPRA_ORGEH_TO_VENDOR_GROUP: Problem w/
check mode 9 (2
Check above these 2 notes.
BR
Muthu

Similar Messages

  • TS3048 I have just purchased a new apple cordless keyboard.  The numeric line of keys along the top are not functioning as they should.  For example I am unable to get a question mark or a forward slash.  I have tried holding down both shift and alt keys.

    I have just purchased a new apple cordless keyboard.  The numeric line of keys along the top are not functioning as they should.  For example I am unable to get a question mark or a forward slash.  I have tried holding down both shift and alt keys.

    Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped.  It seems as though the line of number keys along the top aren't actually doing what is printed on them.  Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes.  So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key.  The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along.  Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead.  It is going to drive me mad if every time I want to type something it is a guessing game....!  What do you suggest - question mark

  • Match Pattern does not function properly when searching for a null character

    I'm using Match Pattern to extract a null terminated string from a response I'm getting from a device on a serial port. The VI is attached and below is a screenshot of the block diagram.
    It works just fine with index set to 0, 1, or 2. When index is 3, I get the output shown below.
    Why is Match Pattern not finding the null character?
    Thanks!
    Solved!
    Go to Solution.
    Attachments:
    Grab Nullterm String.vi ‏15 KB

    I'm a dope, need to remove the wire from the Offset control to the Match Pattern control.
    DUH!

  • My Ipad has a message on the screenthat indicates that the unit has not been backed up for two weeks. When I press the OK icon nothing happens. I tried to shut the unit down and the red slider does not function.

    My Ipad has a message on the screenthat indicates that the unit has not been backed up for two weeks. When I press the OK icon nothing happens. I tried to shut the unit down and the red slider does not function.

    A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo reappears, release both buttons and await restart.

  • I purchased the Adobe pdf Pack to combine 50 PDF files to one and when I select them from my folder it claims "the files are not in a format not supported for conversion to PDF".  They already are pdfs, what am I doing wrong?".

    I purchased the Adobe pdf Pack to combine 50 PDF files to one and when I select them from my folder it claims "the files are not in a format supported for conversion to PDF".  They already are pdfs, what am I doing wrong?

    Moved to Adobe PDF Pack (read only)

  • Pagefile exclusion for VHDs is not functional System Center DPM 2012 R2

    The Release Notes for Data Protection Manager in System Center 2012 R2 state that:
    Pagefile exclusion for VHDs is not functional
    Description: Pagefile exclusion for virtual hard disk files (VHDs) is not functional.
    Workaround: None.
    I feel silly asking this in the forums, but my mind just can't wrap around the fact that this feature (that was just recently added in DPM 2012 SP1) is broken in the new release of 2012 R2.  Does anyone with actual knowledge of the product have any
    additional info on this issue?  Do we need to wait for a service pack to fix it or are there possibly ANY workarounds or situations where it might be used?
    TIA

    Hi,
    This is a documentation error and will get it addressed.  DPM 2012 R2 RTM does still support page file VHD exclusion same as DPM 2012 SP1.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Spry Tabbed Panel Content editable region not functioning

    I have a web page I created in dreamweaver CS5 with a tabbed panel.  When my client opens the page to edit in contibute, the content and tabs do not function properly.  Basically, the tabs do not function and the content for all of the tabbed regions is listed down the page on the first tab window. The page works fine when I open in Contibute on my computer, but only if it is through the Contibute Program.  If I try to edit through firefox, I get the same issue as my client. 
    http://menwieldingfire.com.previewdns.com/bbq/bbq-menu.html
    also, I get a space between the header image and the horizontal menu that goes white.  I end up having to re-upload the page from dreamweaver. Why would the follow code get added to the page when a draft is created in Contribute, when this page is based on a template with editable regions?
    < p style="margin-top: 0; margin-bottom: 0;">&nbsp;</p >
    Any ideas?

    Check http://blogs.adobe.com/contribute/2010/06/paragraph_spacing_options_in_a.html  and also http://blogs.adobe.com/contribute/2010/06/spry_widget_rendering.html it should be helpful to resolve the issue.

  • Push notifications often do not alert as they should.

    We are finding that push notifications are not functioning as it should. Most of the time no alerts are present but then you unlock your phone and then you are hit with a flood of notifications. Settings are set correctly under "notifications".
    Hardware: iPhone 4S
    Software: iOS 7.0.5 on most devices. 7.0.6 on the rest.
    How can we solve this? Thanks in advance!

    Hello DaemonPix,
    Thank you for the question.  It sounds like there is you are not receiving notifications while your phone is locked.  Have you checked to see if Do Not Disturb was accidentally enabled?  You will see a "moon" icon in the status bar if it is enabled.
    You can disable Do Not Disturb in Settings > Do Not Disturb or in the Control Center as described in the following articles:
    iOS: Using Do Not Disturb
    http://support.apple.com/kb/HT5463
    iOS: Understanding Control Center
    http://support.apple.com/kb/HT5858
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • 'a device attached to the computer is not functioning'

    I ran into an error today importing files from my iPhone5 to my PC. The error read:
    'a device attached to the computer is not functioning'
    It happened repeatedly for certian (larger) files that I would attempt to transfer.
    The solution, I found was to ensure that I was using an authorized iPhone lightning cable. The cable I used first was a $7 knockoff. It works great for charging, but data transfer is sketchy.
    Plugging into an Apple-made cable made the problem disappear!

    There were stories published that indicated some companies built and sold lightning cables before Apple had finalized the specifications for them. The cable you purchased might have been one like that. Apple certifies cables the meet the needed specifications and that info appears on the packaging.

  • Crystalreports Viewer - Buttun Export Not Function on W7 64Bit

    Hi,
    When I start my software (realized with Vistualstudio 2008) on W764Bit machine the button,in the CristalReportViewer, for export not function. (The dialog for format choose is not showed and the program is locked)
    The same program on the W7/XP/Vista 32bit run correctly.
    The program is compiled for x86 platform.
    How I can resolve the problem?
    Thanks
    Martino Luccarelli

    Web or win app? - If web, make sure the app pools is running as 32 bit...
    What version of CR?
    -Ludek

  • Spilled soup on MBA keyboard, now Keyboard will not function

    spilled soup on MBA keyboard, now Keyboard will not function. it initailly worked for a while, but after a while the keyboard doesnt respond, not even the power button (holding it down). if i have to bring it to apple. how much would it likely cost... i am really having rough times with money, and was about to sell it... Thanks

    That all depends on whether any of the soup made it past the keyboard to the motherboard. If it did then the MB may be toast.
    Go to ifixit.com and look up your MBA. If you can remove the keyboard, rinse it very thoroughly with distilled water (distilled water is non-conductive) followed by a rinse with pure isopropyl alcohol (not the 70% stuff you can get in a drugstore) to absorb the water. Let it dry for a few days in a desiccant (put it in a porous bag (pillow case or similar) and add the desiccant over and around it and then place that in an airtight container. The more desiccant, the better.) A good desiccant is clay cat litter, baked in an oven for a few hours @ 300+ °F. Afterwards, cross your fingers and plug it in.
    Careful, the alcohol is flammable.

  • Password Remember Button does not function; Can't input 3rd Party Passwords for Social Networks/Emails.

    My "Remember" button doesn't work. Simple as that. The "Not Now"
    Button still works, and closes the pop-bar. Remember doesn't do anything.
    [Exception... "'User canceled master password entry, login not added.' when calling method: [nsILoginManagerStorage::addLogin]" nsresult: "0x8057001e (NS_ERROR_XPC_JS_THREW_STRING)" location: "JS frame :: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsLoginManager.js :: anonymous :: line 445" data: no]
    Occurs when trying to input 3rd Party extension passwords.
    I have no master password set, I have also read the "Password not remembered topic", and it didn't help.
    Error Console yields this:
    "'''Warning: The 'charCode' property of a keyup event should not be used. The value is meaningless.
    Source File: https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=Password+Remeber+Button+does+not+function%3B+Can%27t+input+3rd+Party+Passwords+for+Social+Networks%2FEmails.&showform=1#question-form
    Line: 0'''"

    Okay, I have started Firefox in Safe Mode, and the Remember button still didn't work. After checking the error console, It had the following message again:
    "Error: uncaught exception: [Exception... "'User canceled master password entry, login not added.' when calling method: [nsILoginManagerStorage::addLogin]" nsresult: "0x8057001e (NS_ERROR_XPC_JS_THREW_STRING)" location: "JS frame :: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsLoginManager.js :: anonymous :: line 445" data: no]"
    After I Evaluated it (In the error console) it gave me a slightly different version:
    "Error: missing ; before statement
    Source File: javascript:%20Error:%20uncaught%20exception:%20[Exception...%20"'User%20canceled%20master%20password%20entry,%20login%20not%20added.'%20when%20calling%20method:%20[nsILoginManagerStorage::addLogin]"%20%20nsresult:%20"0x8057001e%20(NS_ERROR_XPC_JS_THREW_STRING)"%20%20location:%20"JS%20frame%20::%20file:///C:/Program%2520Files/Mozilla%2520Firefox/components/nsLoginManager.js%20::%20anonymous%20::%20line%20445"%20%20data:%20no]
    Line: 1, Column: 8
    Source Code:
    Error: uncaught exception: [Exception... "'User canceled master password entry, login not added.' when calling method: [nsILoginManagerStorage::addLogin]" nsresult: "0x8057001e (NS_ERROR_XPC_JS_THREW_STRING)" location: "JS frame :: file:///C:/Program%2"
    I read the Troubleshooting extensions & Themes, but It didn't help.
    When I tried to read "http://kb.mozillazine.org/Password_Manager" I get a page that says:
    "ERROR
    The requested URL could not be retrieved
    While trying to retrieve the URL: http://kb.mozillazine.org/Password_Manager
    The following error was encountered:
    * Connection Failed
    The system returned:
    (110) Connection timed out
    The remote host or network may be down. Please try the request again.
    Your cache administrator is root. "
    Also, this error occurs in ALL 3rd Party extensions. It can't log me into E-Mail accounts, Facebook, Twitter, anything. The error message has a window title of [JAVASCRIPT APPLICATION] if that says anything.

  • I believe my firefox is viewing some websites on my laptop in formats that are used for cellular devices. Sites like facebook, sports illustrated, yahoo are not functioning correctly but certain sites work fine.

    sits such as facebook, yahoo, and sports illustrated do not function correctly on firefox but they do on my internet explorer. I believes its somehow set itself into the same format used for cellular devices... My JSU.edu page says somethin about it being in (portal mode). It is also a different format now that normal.

    Hi @TheBigGiggle ,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY TouchSmart 17 Notebook PC and a keys not functioning correctly. Here is a document on cleaning the keyboard.
    I would start with air on the keys as sometimes debris can cause this issue.
    Here is a link to uninstall the keyboard. In the device manager have you uninstall all that is listed in keyboards, restart the computer after uninstalling, it should reinstall automatically and resolve any issues with the keyboard.
    Here is a link to keyboard troubleshooting.
    Here is a fix from Microsoft that might help.
    Let me know how this goes.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • FRM-41009:  Function key not allowed.  Press %s for list of valid keys.

    FRM-41009: Function key not allowed. Press %s for list of valid key.
    What is reason for this message, and how can we suppress it. Where should I set the system.message_level to suppress this message.

    The reason is you press a key that cannot be used, e.g. duplicate record cannot be used in enter query mode.
    You cannot suppress this message, even with message_level 25. If you code this for key-duprec, you will still get the message:
    :system.message_level := 25;
    duplicate_record;Forms intercepts the error at a very early stage. Even this didn't suppress the message:
    if :system.mode = 'ENTER-QUERY' then
      null;
    else     
      duplicate_record;
    end if;

  • Process chains for loading data to target is not functioning

    Hi SAPians,
    Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly.  We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
    However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
    We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
    To mitigate this we tried deleting the bad request and it prompted with the below message:
    "Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
    Please advise us how the bad request should be deleted?
    Regards,
    Soujanya

    Hi Sowjanya,
    Follow the below procedure to make yellow request to RED:
    Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
    From the next screen, for I_REQUID enter that request ID and execute.
    From the next screen, select 'Status Erroneous' radiobutton and continue.
    This Function Module, change the status of request from Green / Yellow to RED.
    Once it is RED, you can manually delete that request...
    Releasing LocK
    Gott Transaction Code SM12 and release the lock.
    Hope It helps you.
    Regardss,
    Nagaraju.V

Maybe you are looking for