BBPGETVD use of address comparison to identify duplicates Check box?

Hello Experts,
Have some doubts .
When I check the box in BBPGETVD use of address comparison to identify duplicates Cbox?
1) system should should transfer the number from R/3 right ?? system does not replicates??
2) When I check the box to assign internal number , system replicates the vendor successfully .
So can you please put some light on this behaviour of system.
Thanks
Kapil

Hi Kapil,
The number assignment and the Duplicate check are two different functionalities. The duplicate check (if ON) takes the address of the vendor and checks in the SRM for any BP with the same address. If there is already a BP present in the SRM system with the same address, then the vendor is not replicated from ECC.
Hope this helps
Cheers,
Yateesh

Similar Messages

BBPGETVD use of address comparison to identify duplicates Cbox?

Dear Experts,
What is the use of this check box
Address Comparison to Identify Duplicates in transaction BBPGETVD?
While running this transaction manually, if we dont select this cbox , no vendor is replicated from back end, what is the problem?
Thanks,
Anubhav

Hi SG,
Sorry for the wrong description, you are correct it works the other way round.
The vendors we are trying to replicate does not exist in the system yet, still we have to uncheck the option beofre replicating them.
There should be no problem even after selecting the cbox..right? because the vendors are new?
Why is it giving error for new vendors?
Thanks for the help,
Anubhav

Address comparison to avoid duplicates in Vendor replication

Dear SRM experts,
Can you please enlighten me about the Address Comparison check in Vendor replication?
What would be the consequences of running the vendor replication without checking the address comparison?
Thanks,
Vipra.

Hi SG,
Sorry for the wrong description, you are correct it works the other way round.
The vendors we are trying to replicate does not exist in the system yet, still we have to uncheck the option beofre replicating them.
There should be no problem even after selecting the cbox..right? because the vendors are new?
Why is it giving error for new vendors?
Thanks for the help,
Anubhav

Using email address as login identifier (UPN)

We have a CRM 2011 that we need to expose to a set of external users.
We want to be able to add the new external users in the CRM as say [email protected], and then have them authenticate using their email address when they login
The plan is to use an external/3rd party identity service that provides a bunch of wokflows for password changing and other support functions.
We will be using ADFS 2.1 between our ADFS server and the 3rd party identity service ADFS.
We will have some internal users using the CRM and this set of external users.
We would like the external users to be able to use their email address to login. Their email addresses will all be from one domain (xyz.com) but that domain will be different to the 3rd party identity provider.
Now providing we have trusts set up correctly between our ADFS server and the 3rd party ADFS server, is this possible with some claim mapping by the 3rd party identity provider?
Given the 3rd party ADFS server will receive an email address of [email protected] can they then map that to a valid user on their domain?

Hi Bruce,
Here are some related links about how to use email address as user logon name:
How to Allow the Use of an E-mail Address as the Logon User Name
http://technet.microsoft.com/en-us/library/bb123626(v=EXCHG.65).aspx
Configuring SharePoint 2010 and ADFS v2 End to End
http://blogs.technet.com/b/speschka/archive/2010/07/30/configuring-sharepoint-2010-and-adfs-v2-end-to-end.aspx
In regard to third party functionalities, you may need to contact third party support for solutions.
Best Regards,
Amy Wang

Restored Using time machine, now I have no check boxes.

So my hard drive deceided to stop working not too long ago, so I got a new one and booted from a time machine back up. After the restore, oddly enough, I do not see check boxes anywhere. Whether it is on a website, or on a system preference page, if there is an option with a check box next to it, it does not appear for me. However, I can still select these checkboxes (assuming of course that I am in the right spot while clicking at essentially nothing). In addition to this craziness, if I click on my volume option in the toolbar on the top, I see an empty box where the volume selection meter used to be. I can still change the volume by clicking somewhere in the empty rectangle, but the problem is that I do not see anything. Not only that, but I also noticed that my keyboard will no longer allow me to adjust the volume or the brightness.
One other weird thing is that everytime I try to do a new back up in time machine, it lags out and fails. So there is a lot of weirdness happening, and all of this happened after I restored. I tried marking this post as a question, but I'm not sure if that was successful (you have click on a checkbox for that). Please help.

You posted your question in the OS 9 & below forum, so you won't get an answer here. You need to repost in the Snow Leopard OS 10.6 forum at https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard
 Cheers, Tom

Duplicate check works in GUI, but not in WEB UI

hi,
I have used TREX search engine and BAS address service for BP duplicate check.
this works fine on the GUI, diplaying the duplicates found.
However, on the web UI, it does not show any duplicates.
What seems to be the problem?
PS. I have created implementations for the classic BAdIs address_search and address_update

hi, sorry, but i missed the show duplicate button. The question is answered.

Event to use for Creation of a Check box on Warehouse master Form

Hi experts
I have created one check box on Warehouse Master form in AfterMENUClick Event. It works fine if I open the form on Menuclick . But If I open the Warehouse master form by Link button from any document, it does not show the check box. I also want to deactive the checkbox if once it checked. So, I do some coding in Data_Load event. It also works fine If I open the form by Menu click. But if I open the form by Link button it gives error " Invalid Item Id ".
So I want to know which event I should use to create the check box and which Event I Should use to Deactive the Check box

Thanks Nagy for quick reply
I use the following code for creation of check box
<B1Listener(BoEventTypes.et_FORM_LOAD, False, New String() {"62"})> _
        Public Overridable Sub OnAfterFormLoad(ByVal pVal As ItemEvent)
            Dim ActionSuccess As Boolean = pVal.ActionSuccess
            Dim form As Form = B1Connections.theAppl.Forms.Item(pVal.FormUID)
            'ADD YOUR ACTION CODE HERE ...
            Dim oForm As Form
            Dim oMatrix As Matrix
            Dim oItem As Item
            Dim sysItem As Item
            Dim BinCheck As CheckBox
            Dim BinLabel As StaticText
            Dim cmbBinCode As ComboBox
            oForm = B1Connections.theAppl.Forms.ActiveForm
            oForm.PaneLevel = 1
            sysItem = oForm.Items.Item("2000002010") 'Excisable check box
            oItem = oForm.Items.Add("BinChk", BoFormItemTypes.it_CHECK_BOX)
            oItem.Left = sysItem.Left
            oItem.Top = sysItem.Top + 20
            BinCheck = oItem.Specific
            BinCheck.Caption = "Bin Enabled"
            BinCheck.DataBind.SetBound(True, "OWHS", "U_BinEnabled")
        End Sub
It gives error on sysItem = oForm.Items.Item("2000002010") line Invalid Item Id
Plz check and tell the problem
Regards
Gorge

How to enable a check box using the table LVC_S_FCAT

hi,
I am working on reports. I have to have a check box and i am using the table LVC_S_FCAT to get the check box, i am getting the check box. how to enable it.

Hi Preethi,
try to set default the check-box with the
value '0', '1', '-', ' ' and 'X' (0/1 -> only display,
'-' field is not shown, ' ' and 'X' is normal)
and see the differences.
Hope it helps.
Regards, Dieter
Sorry, i thought you meen enable not editable.
Message was edited by: Dieter Gröhn

Updation/insertion of multiple records simultaneously using check box

Hi,
I am using Jdev11.1.1.2.0 version. I have the following scenario.
There is a table in the view.At run time, I need to select multiple records and update those records in the database. So i took check Box as a column in the table.*(I did not associate check box to any of the attributes (columns) in the table.)* After running the application, I selected multiple records using checkbox and submitting them. The check box is returning value as 'false' even for the selected records also instead of 'true'. Because of this we are facing the issue in updating only the selected records. Please suggest your valuable inputs.
I have written the following code in the backing bean to get the selected rows.
BindingContainer bindings =BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcIter= (DCIteratorBinding) bindings.get("PttDeliverabvleTrackerEOView2Iterator");
RowSetIterator depRSIter = dcIter.getRowSetIterator();
depRSIter.setRangeSize(depRSIter.getRowCount());
Integer key = depRSIter.getRowCount();
System.out.println("No of rows is "+ key);
int rowIndex =0;
for(int i =0; i<key; i++){
PttDeliverabvleTrackerEOViewRowImpl row = (PttDeliverabvleTrackerEOViewRowImpl) depRSIter.getRowAtRangeIndex(i);
System.out.println("Check box value2 "+ this.getSbc1().isSelected());
if(this.getSbc1().isSelected()){
rowIndex = i;
System.out.println("Row Index: "+ rowIndex);
Please let me know if it is it possible to associate a checkbox to any of the attributes while dragging and dropping the table in the view and update the records?
I tried selecting the option 'Row Selection' while dragging and dropping the table and changed the property RowSelection->multiple. But it is not serving the purpose of updating multiple records.
Please suggest if there is any other solution to update multiple records.
Regards,
Sreelatha.

Hi,
if you added checkboxes to a table, then at runtime the checkbox is stamped, which means that a call to this.getSbc1().isSelected() just returns the state of the last checkbox that is rendered. I don't want to go into the details of ADF Faces table rendering here, but point yu to a blog article that does what you are aiming for using ADF BC: http://sameh-nassar.blogspot.com/2009/12/use-checkbox-for-selecting-multiple.html
Frank

Using addresses, can you print duplicate mailing labels for the same address

using my address book, can I print duplicate mailing labels for the same name and address.

I checked the Address Book Print Dialog and I did not see the option to duplicate a single label.
The only thing you could try is to select the name in your list. Then do Command-P to print which should get you to this dialog box:
Try changing the # of copies and see if that does what you want. Otherwise I'm not sure and your answer may best be found in the Address Book forum on here.
You may not want to incue the expense but Microsoft Word will do what you want.

Can I use ip address and hostname to establish Site 2 Site VPN?

Is it possible to use both; hostname or ip address while trying to setup an ipsec tunnel?
The scenario we have is that there is a customer who has one central site and 10 remote sites. Each site exists for a period of 3 to 6 months and then the staff moves to another location as a result the router/firewall and other IT resources are moved too. This requires me to setup and tear down tunnels from the head office as well as remote sites. To avoid this, i was thinking of using dynamic DNS which would save me a lot of work. Is it possible that I can setup VPN tunnels by either method i.e. hostname and ip address or do I have to stick with any one method only? As a reference the command used to identify peers is
"isakmp identity {address | hostname}"
The firewall version is 7.0(5)

Hi,
If you want to use IP addresses also then you could probably configure dynamic L2L VPN connections so that even if the IP address etc of the remote site changes, it is able to connect to the central site without making any change on the central device. For the remote sites that have the static public IPs, you can create static L2L VPN connections.
HTH,
Please rate if helps,
Regards,
Kamal

Disable duplicate check for address in customer creation

we use OE_HEADERS_IFACE_ALL, OE_LINES_IFACE_ALL, and OE_CUSTOMER_INFO_IFACE_ALL to upload sales order from third party system into OFS. For every sales order, we would like the system to create 1 new ship-to address and 1 new bill-to address.
However, when the address has been created in OFS, subsequent creation of the address will fail with the following error message.
Duplicate SHIP_TO ADDRESS found for SOSHMI003_S. Please correct the data.
1) how can we disable to address duplicate checking.
problem background
Our third party system need to pass to OFS the customer info, address info and sales order info. For customer info, we can use the customer_number as reference key between 2 systems, so we can control if the customer already created in third party system (ie: created in OFS also), the third party system will not create the customer again.
However, for address, there is no such a reference key that we can use, unless we are sending back the invoice_to_org_id and ship_to_org_id to the third party system, which we dun want. we want a one way data flow.
please share us if you have a solution on this. many many thanks.

Hi Ankur,
please note that only duplicated IDs are being checked during the C4C data migration or migration simulation step.
The system will not perform in the migration workbench the duplicate check logic which considers and weights the content of different fields of the customer (name, address, etc).
Kind regards
Bernd

Message on WCS/NCS: Attempted to use IP Address assigned to another device

Hi
i have two WLCs AIR-CT5508-K9, monitored by WCS (in retiring stage) and NCS.
All APs are grouped in HREAP groups based on their locations. The wireless users are getting ip from a dhcp pool running on routers located at each site. All dhcp commands on every routers are the identical. Eg. rtr1, located on site 1 has ip pool for wifi users 192.168.8.0/24. Rtr2 on site 2 has a ip pool for wifi users in range 192.168.8.0/24. Occasionally i am getting bellow message when some wifi users are unable to connect. After creating a HREAP group and associating APs to correct group, this message stops showing for a while but now i am getting them again.
The temp solution to get it all running is to clear ip dhcp pool on router located at affected site.
Any suggestions for a better solution?
Thanks
====================
NCS has detected one or more alarms of category Security and severity Minor in Virtual Domain ROOT-DOMAIN
for the following items:
1. Message: Client '14:5a:05:6c:75:37 (0.0.0.0)' which was associated with interface '802.11b/g/n' of AP 'STV-AP-7198' is excluded. The reason code is '3(Attempted to use IP Address assigned to another device)'. - Controller Name: GEORGE-WLC
===================

endpoint,
You are locally switching your networks, yes, but even without HREAP and WLCs, they are still connected networks in your overall topology, correct? I would never have site A with a given network that overlaps with a network in site B. With few exceptions, they should be completely separate, unique, non-overlapping network spaces. HREAP doesn’t even come into it.
The problem you’re likely having is that the WLC is seeing clients coming in from two different sites and because you are duplicating your configurations from site to site, the WLC sees duplicate IP assignment.
That said, you can try to turn off client IP address learning on the WLAN Advanced tab to see if that helps.
Justin

New video blog: Address Validation and Duplicate Check in IC

Hello Everyone,
Here is a short video discussing "Address Validation and Duplicate Check in the Interaction Center" for CRM 7.0 from Renee Wilhelm of SAP product management.
[http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/70e18a60-efc9-2c10-01ae-c4626f673a53]
Best regards,
John
P.S. Please share your thoughts, ideas, or concerns! Thank you.

Hi,
in the video, you say that the user (logged into the system as IC Agent), can choose to merge the BPs once identified that a duplication exists.
By the way, into SAP OSS note "1565230 - dump after merging of BPs in IC webclient" it is written that it is not supported to integrate Business partner merge functionality to IC webclient.
Here below, an extract from the Note:
Reason and Prerequisites:
It is not supported to integrate Business partner merge functionality to IC webclient. Technically after the merging of Businss partners, the buffers of business transaction will be initalized at API layer directly, instead of by Genil layer. It is not possible to synchronize the buffer to BOL layer. Once you access to the business transaction which has been initialized during the merging of Business partners, the dump will occur.
Solution:
It is required to move the functionality to the business roles for
backoffice scenario, for example, SALESPRO etc.
What do you think about? Am I missing something?
Thanks in advance and Best Regards,
Andrea

Identifying duplicate records in a table

I am trying to identify duplicate records in a table - well they are broadly duplicated but some of the fields are changed on each insert whilst others are always the same.
I can't work out the logic and it is driving me #$%$#^@ crazy !

Here are a couple of other examples:
Method 1: -- Makes use of the uniqueness of Oracle ROWIDs to identify duplicates.
=========
To check for single column duplicates:
select rowid, deptno
from dept outer
where
outer.rowid >
(select min(rowid) from dept inner
where inner.deptno=outer.deptno)
order by deptno;
To check for multi-column (key) duplicates:
select rowid, deptno, dname
from dept outer
where
outer.rowid >
(select min(rowid) from dept inner
where inner.deptno| |inner.dname=outer.deptno| |outer.deptno)
order by deptno;
Method 2: -- Makes use of resultset groups to identify uniqueness
=========
To check for single column duplicates:
select rowid, deptno
from dept
where
deptno in
(select deptno from dept group by deptno having count(*) > 1)
order by deptno;
To check for multi-column (key) duplicates:
select rowid, deptno, dname
from dept
where
deptno| |dname in
(select deptno| |dname from dept group by deptno| |dname having count(*) > 1)
order by deptno;
null

BBPGETVD use of address comparison to identify duplicates Check box?

Similar Messages

Maybe you are looking for