BC Partner site not appearing in DW CC

I am a BC partner, and when I use DW CC to edit my sites I can't see my free partner site.
When I go to the list of my BC sites, the list is empty.
Can I use DW CC to edit my partner site?
Nick

Did you define the BC site in DW?
Go to Site > New Business Catalyst Site. You should receive a log-in prompt.
Nancy O.

Similar Messages

Site Not Appearing When I Open iWeb 09

When I open iWeb 09 my web site usually appears. Now the application opens but the site does not. The inspector apears but nothing else. Under File I cannot open a new page or new site. Under library/application support/iweb the file named Domain is there. If I try to open that the same thing occurs.
Just before this started happening I would be able to open my site and on my blog page the main page opens and looks fine but the page with the individuals blogs as well as the archive page were blank. The program crashed a couple of times and now nothing appears as I have noted above.
If you have any thoughts on what is happening or has happened and what I can do about it please respond. Thanks in advance.
Brent

Thanks for the link. Deleting the preferences file worked. Now I get my site back, however the problem with the blog remains.
I have the blog as a second site in iweb. It has been working fine as I have been creating it (haven't published this yet) but now only the Blog page is visible. The Entries page and the Archive page are blank white. When I went to try to publish it just now it came back with an error and unable to publish.
Any thoughts on this remaining concern? Thanks.
Brent

Partner Functions not appearing

Hi
When the PO is created manually, the Partner Function is being picked up from the Vendor Master. But when the PO is created for the same vendor with reference to the PR, the Partner Functions are not being populated in PO. The Vendor Master has Partner Functions defined and the Partner Schema is assigned to the concerned Puchasing Document type and Vendor Account Group. Any specific reason why the Partner Functions are not appearing in PO when created with ref. to PR?
Regards
Prashanth

Hi,
Check vendo subrange or plant level data is ativated for that vendor.
Are you using the same material & Plant for both manual PO & PR to PO ?
Also check in partner determination > partne settings in purchasing documents > defie partner schemas, here end & higher level check mark is there?
Regads,
Prabu

Hello... i cant bwoser blospot on my browser .blogspot site not appearing on my broswer plz help

recent i added an custom domain on my blogspot site as www.allfreeebooks.net
but on my browser this site not showing as direct url . loading loading then spot that page .
i can access my blogspot account , can post too . but when i try to see my page on my browser not opening and cant see .
Note : with pagewash can see page . but direct with url my site cant see . and not opening .
sometimes can see for few min after then same problem
plz help me ...
one more .. not opening any blogspot site on my web browser. i have removed cookies , tried with everything .. but nothing happened .
plz help

If you previously used a different domain for that website then Firefox may still have old content in the cache.
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Name Of Site Not Appearing When Viewing Site In Browser

When I view my completed or nearly completed pages from the
site I am building in IE or Firefox, the heading at the top of the
browser says 'Untitle Document'. How can I get the name of the site
to appear instead?
Thanks!

quote:
Originally posted by:
Klayber
I just checked www.johndoe.com , you have a nice opening
there.
but the home.html you didnt upload yeat, did you?
you know if you just previewing it in your browser it will
always show in the address bar the path like C:\ etc.... but to
change the titles all you have to do is put the names in the title
field.
if you think this has nothing to do with what your question
was please just refrase your question than i might understand it
better.
Well, JohnDoe.com isn't actually my site. I just used it as
an example. (My site is www.BigMusicGeek.com) I didn't realize that
the path always showed when previewing the page in a browser. I am
painfully new at this, so some basic ideas just escape me. Now that
I have the title of the site appearing correctly in the browser, I
can get back to finishing the design of my home page.
Thanks!

Why does my site not appear correctly on other computers?????

I made a website for the gallery I manage. address is 12spsg.com
When making the site with CS4 it looked fine on both computers I was working on but now the left sidebar is appearing in the middle of the screen, the top menu bar is not all one row there are a few doubles, etc.
HELP!!!!!
Is there an EASY way to make my site "normal" on all comps and in all browsers?

First, validate your code by running your website through the following page:
http://validator.w3.org/
Next run your page through the CSS validator:
http://jigsaw.w3.org/css-validator/
Basically the second one will just tell you that you need to declare a width on any element that uses a float.
Also if you need help fixing a specific problem can you please post what browser and version the page looks bad in? Right now I see no discrepancies in either Firefox or Safari which leads me to believe what you are describing is probably only happening in IE. So if you could please state which version(s) of IE you are noticing the issues with.

Site not appearing correctly on browser or on iPhone

Hi everyone,
I have a site - http://www.amsivertson.com - if you go to the "photography" page, you'll see my problem. (tested in current versions of Firefox & Safari and on iPhone 3G)
1.The text on the site can't be selected in order to copy/paste
2.Try clicking and dragging on it and you'll see it follow your cursor as if it's an image -- and sometimes you'll notice it loads progressively like an image as well
3. if you view it on an iPhone, all that appears are the first couple of headings, and then only the links - no other text - it actually appears as a large empty square - like an image that isn't fully downloaded - but any links appear where they should and function correctly.
Any thoughts?
Cheers,
Aaron

Aaron:
1 - the reason the text box has been converted to a png file is possible caused by using non-web safe fonts, a drop shadow or some other enhancement to the text or box itself. Open iWeb's preferences and check the option to show text imaging indicator. Then any text box which will be changed will show this:
Also consider using only Web Safe Fonts which will make viewing of your site on other platforms more uniform.
2 - can't help you much with the iPhone issue but set the page width to 980 which is the iPhone's width in pixels. Any thing less causes problems I'm told.
OT

Trusted Sites Not appearing in Windows 7 & IE10

We have GPO setup to configure IE10. This has been working great until recently (We cant find what has changed to cause this) . When checking IE10 Internet Security settings the trusted sites list is now empty. It used to be there . We have done some investigation
work and this only happens to users creating a new local profile on a workstation. So users with existing profiles do not experience this issue. GPO is being applied - have run RSOP and all looks good from that. Any help would be very greatful.

How are you setting the trusted sites with Group Policy? Check out this guide - it might help:
http://deployhappiness.com/managing-internet-explorer-trusted-sites-with-group-policy/
Also - do you see any errors in event viewer?
If my answer helped you, check out my blog:
Deploy Happiness

Site not appearing correctly after publishing

Ok so i create a new site using the default white template page. I then change the width to something like 1100% & then add my own custom background. I then proceed to move the nav bar a little to the right & then place the site name in a text box just left of it...
...Now my problem is that when i publish the site everything is unaligned & has move slightly to the right of the page :? I have yet to add anything else to the page until i can get this sorted out. Ohhh & i have attached a before & after screenshot just so that you can see my problem ;-)
Before, still inside iweb: http://f.cl.ly/items/3Y1D1X230N2L00022y3n/Screen%20shot%202011-11-12%20at%2013.0 5.55.png
After, once the page has loaded in safari: http://f.cl.ly/items/2046273K3V1i2Y0u313h/Screen%20shot%202011-11-12%20at%2013.0 6.01.png
Thanks in advanced;
( Jonny )

Thanks for the reply but it's of no help, I already know all that stuff. What i am actually doing is creating the site using iweb & then uploading it to a server using cyberduck as the server im uploading to doesn't seem to like the way iweb uploads it :?
When i click on your link i just get the same thing as before. Only this time ive added a bit more to the page...
...See the screenshot here |>>> http://f.cl.ly/items/2Q3L0N340M0p3o2m0Q11/Screen%20shot%202011-11-12%20at%2013.4 6.57.png

BP not appearing in ppoma_crm

Dear All,
I have a very basic query for you all. I have created a Organisation model in PPOMA_CRM. I have also assigned user to it but business partner is not appearing even after saving it.
I need your help to figure-out which part of configuration area I may have over looked. FYI, I have not done any new configuration for BP (stayed to core standard functionality).

Hi,
After upgrading the system to EHP1, even I'm getting the same issue could you please share me the solution.
Regards
Charan

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analy

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium

The navigation menu does not appear when published to folder and my 12 photos are not on the site either

The navigation menu does not appear when published to a file. My 12 photos are also absent as well, just as if they wernt added.
I have tried rebuilding the site but the same problem appears. Everything else seems perfect up to tha publidhed file.
Has anyone had the same problem,
John
Message was edited by: BOURBAH

Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

The navigation menu does not appear when published to folder and my 12 photos arenot on the site eitherr

The navigation menu does not appear when published to a file. My 12 photos are also absent as well, just as if they wernt added.
I have tried rebuilding the site but the same problem appears. Everything else seems perfect up to tha publidhed file.
Has anyone had the same problem,
John

Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

Photos do not appear on published site

My photos do not appear on the page when I publish the site within the computer.
Also the hyper linl mwnu at the top of every page are not there either when published.
Sounds like I do need help,
John

Hehe, that is what i experienced using the MobileMe trial.
Ok, I will dig deep into my computer software boxes and look for the discs that came with the computer.
Thank you for all your help, it is much appreciated

Widgets Not Appearing on Published Site

I updated my work website by adding photo albums (Simple Viewer through LR4) with the HTML widget and YouTube videos with the YouTube widget. After saving and publishing the site changes, I viewed the website through iWeb (when prompted) and everything looked good. I then uploaded the website changes using Fetch, but all changes involving one of the widgets (HTML or YouTube) do not appear on the updated website (but the text and new pages are present). I repeated the saving, viewing, and uploading with the same results. This is an example of one of my new pages which is meant to have both YouTube videos and Simple Viewer photo albums: www.animalcancersurgeon.com/Limb_Amputation.
What can I do to get the widgets to appear on my uploaded website?
Thanks

Thanks, Wyodor. Interesting - I cannot see these widgets on my site in either Safari or Firefox. When you go to the bottom of the page that you took a screen shot of above, do you see the Simple Viewer photo album?
When you say I should have moved the missing files on the server - should I have moved them to the Scripts folder or, in the above case, to the Limb Amputation folder?
This is currently the contents of the Limb Amputation folder:
And this is the content of the HTML and YouTube folders, which are both in the Widget folder insider the Scripts folder:
I'm not very savvy at this kind of thing, but I don't see the YouTube widget files in the Limb Amputation folder and nor do I see them in the YouTube folder inside the Scripts folder.
In the Limb Amputation folder, is widget6_markup.html the HTML widget for the Simple Viewer photo album?
Thanks for your help - I really appreciate it.

BC Partner site not appearing in DW CC

Similar Messages

Maybe you are looking for