BC Set for RFX Without approval

Hi there,
I have activated BC Set for RFX Without approval (/SAPSRM/C_RQ_600_000_SP04).
Then, all the RFX created are with the following status on the RFX Approval tab
Process step=Automatic Approval
Status=Open (No Decision Made)
Processor=System
On BBP_PD the following status for the RFX are shown:
Awaiting Approval
Created
Complete
RFx Ready
Why is keeping the Status Open (No Decision Made)?
Isn´t it supposed that the RFX is automatically approved by the system?
Is any process or customizing missing?
The Approval Process Data shows the following:
Thanks in advance !
Ezequiel

I tried with the BC Set but it was not possible for me to make it work. Finally I have used Process Controlled Workflow (WS40000014).

Similar Messages

ShoppingCart ProcessControlledWorkflow SRM 7.0 -BC set for N-level approval

Hi experts,
Which BC set I should activate for Shopping cart N-level approval Work Flow.?
How to deactivate existing Active BC set in the system?
Thanks

Hello,
Activation of BC set is to facilitate the faster & easier configuration. You have two options :
1. Activation of new BC set will make the necessary changes. e.g if you have activated SC auto approval, run the BC set for 1 level approval, system will make all the changes required.
2. Manually change the configuration based on your requirement. SRM - SRM Server - Cross Application Basic Setting - Business Workflow.
BC sets are generic & might not fulfill all of your requirements. If your requirement is n -level approval, better to build your own expressions & process schema & levels. Take the reference of SAP delivered process levels.
Hope this helps.
Thanks
Ashutosh

Leave for employee without approver is auto-approved.

Hi,
I'm trying to customize the HR_APPROVAL_CUSTOM pkg whereby I would want the leave for an employee without an approver not to auto-approve and instead raise an error message to sysadmin. Currently, when an employee who applies for leave has no approver, the leave will be auto-approved.
We are using position hierarchy in our system and also AME rules.
Appreciate if anyone can guide as to what would need to be done so that the leave does not get auto-approved.
Thanks in advanced.
Rgds.

Closing the message

I created an Apple ID for my daughter with her own gmail address, but I want her Apple ID and primary email address to be an iCloud email address. How can I do this? I can't set up an icould email address for her without first creating an Apple ID?

I have created an Apple ID for my daughter with her own gmail address as the primary email address, but I want her Apple ID and primary email address to be an iCloud email address. How can I do this? I can't set up an icould email address for her without first creating an Apple ID right?
I'm not good with computers so please explain in simple way...:)
I also wonder what the best way is to set up accounts for children in a family. I dont want them to be able to purchase apps etc through the parents accounts, also some things we like to share as a family and others we don't want to share. Is there any good. clear, simple explanation from Apple Support about these issues? Or best to go to Apple store and go to genius bar or one to one advise?
thanks

You can set up an iCloud account which makes the iCloud email address you choose the Apple ID and thus the login for it:
https://discussions.apple.com/message/22283348#22283348
though I have to say I think it's more sensible if the ID is another address, both for security reasons (so people don't know what the login is) and as a contact address from Apple if the account were to stop working and they needed to contact you. So personally I would to to System Preferences, enter the GMail address which is an ID, and then choose a nerw @icloud.com address.
If she has her own iCloud account she will need either her own computer or her own user account on your Mac to be able to make use of it. You should note that under Apple's terms of use Apple IDs are only available to children of 13 and over.
As to purchasing apps, this is nothing to do with iCloud: it's iTunes, and the login can be different. So you can all sign into the same iTunes account but have different iCloud accounts. Or she can have her own iTunes account if she is of suitable age (credit card needed for purchasing apps).
If you have other children you should be aware that any one Mac or device can create only three iCloud accounts - this is tied to the serial number, not the user account, and once reached cannot be bypassed. You can of course sign into an iCloud account created on another device.

How to set the conditions for item deletion approval workflow?

Hi,
I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
process completes .
Change the behavior of the single task: 1.when a task is Pending.
[I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
When user deletes an item: 1. intimation mail.
How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
Thanks,
Praveen ji

Hi,
According to your post, my understanding is that you wanted to start approval workflow when item deleted.
You should first make some changes to trigger the workflow when you delete the item.
You can use the Event Receiver to achieve it.
In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

You can't "accidentally" put a passcode on any iPhone...its a multi-step process. Further, restoring an iPhone will remove the passcode, as the passcode is not included in an iPhone backup.
Are you sure you're talking about the phone passcode & not something else...like the "Restrictions" passcode?

Single Step approval BRF Workflow for RFx.

Hi,
I am facing one problem in process controlled workflow for RFx. I have the scenario where I have only one approver but 7-8 reviewer are there in between of approver and initiator for example:
Initiator >reviewer1>reviewer2->reviewer3->....reviewer8-->approver.
For acheiving this I have activated standard single step approval workflow.
But while I am trying to add reviewers to the RFx at the time of creation of RFx the system is not shwing the reviewers. it gets refreshed only reviewers line is added to the reviewers Tab but system did not display any reviewer.
And while I publish the RFx it directly goes to the approver and while i tried to add the reviewer from approver end the same problem is coming.
Please help me. How I cam achieve this functionality.
Thanks & Regards,
Sachin

Hello Ashutosh,
Thanks For your reply. I want to add reviewers at the time of creation of RFx not ad-hoc approvers.
As I explain in my question that I have only one approver in whole approval process rest all are the reviewers only who only do the review and add comments not the approving authority.
Thanks,
Sachin

How to create Process level configuration for RFx N-step approval in SRM7.0

Hello experts,
Can any body guide me to create the Process schema for N-level approval in RFx.
My requirement is based on RFx target value, Document type N some custom fields like (Mode of Tendering).
For this purpose, we are going to maintain one custom table with the above said fields like If the value falls under $1000 with the Tender mode as '101' N the Document type as 'BID' then need to go for 2 level approval like that.........
Appreciate your quick reply.
Regards,
Krishna Prasad M.

You can just add the process levels one by one and change the agent (approver)
I realized this as the following:
For BUS2200
Process Schema: 9EV_RFQ_00S (Returns the constant : 9C_BUS2200_EX01)
In 9C_BUS2200_EX01
There is only two levels in the standard, one is the manager approval , the other is the auto-approval.
I added one after the first one , and change the "Resp. Resolver Name" to "RR_MANAGER_OF_MANAGER".
Wish it helpful.
Regards,
WuLin.

Is it possible to create an EQ setting (manual) in iTunes that can be stored on an iPod nano as an addition to the 22 EQ onpresets? I want to use a manual setting for my headphones without applying the setting to each song.

Hi. Is it possible to create an EQ setting (manual) in iTunes that can be stored on an ipod nano as an addition to the 22 EQ presets? I want to use a manual setting for my headphones without applying the EQ to all the individual songs. I'd use a different EQ for my dock.
Thanks.
Paul St

A quick look at the DM1 site shows that it works with Audiocopy.

How to restart awaiting approval for RFX

Dear Expert,
We're on SRM 7 and use automatic approval workflow for RFX.
Today, when we created RFx and checked the the approval status , it is awaiting approval and the system can not approve it .
I check the log , and it is no error. so we had to restart SRM system, after that, the workflow is Ok.
Now, I want to know how to restart workflow for the RFx which approval status is awaiting approval .
Best Regards,
Bill

Hi,
What do you say about restart SRM? Close the Browser and does you open again?
Define as solemnity approval RFX through transaction OOCU in the way SRM> SRM-EBP> SRM-EBP-WFL
Activate event linking
Rgs,
Pedro Marques

My IPhone is asking me to type in my password for my old Apple ID that does not exist anymore. I cant set up ICloud without typing in a password to a Apple ID that does not exist, so do I have to remove everything from my IPhone and start over?

my IPhone is asking me to type in my password for my old Apple ID that does not exist anymore. I cant set up ICloud without typing in a password to a Apple ID that does not exist, so do I have to remove everything from my IPhone and start over?

Hello miamat2017
You should see an option to skip that step and then sign out of it when looking in Settings. Check out the article below for more information.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G.

I am still waiting for my student approval to set up the Adobe creative suite. Can you please help?

I am still waiting for my student approval to set up the Adobe creative suite. Can you please help?
Jasper

Why are you asking this in the Adobe Reader forum?
Best contact Adobe Customer Support.

Accidently closed a Acrobat X Standard file without saving it, autosave is on, set for 5 minutes, but where do I find it?

Accidently closed a Acrobat X Standard file without saving it, autosave is on, set for 5 minutes, but where do I find it?

Hi Michael,
That is not how the autosave feature works. Autosave helps in situations where program crashes/freezes or power goes out (basically, in situations where user have no control over the system). Closing the file without saving is not considered as unexpected interruption; it is intentional for most of the users.
When you close, save manually, or revert to the last-saved version of a file, the autosave file is deleted. Adobe Acrobat X Pro * Saving PDFs

So how can I use my iPhone or stream music on the ATV without having use of the computer?. I am limited I have wifi iPhone ATV and hd TV. My ATV has a setting for AirPlay as well. Please help :)

So how can I use my iPhone or stream music on the ATV without having use of the computer?. I am limited I have wifi iPhone ATV and hd TV. My ATV has a setting for AirPlay as well. Please help :)

Use AirPlay.

Reminder Need to Set for Contract Approval

Reminders need to be set for contract approval when no action has been taken.
The correspondent approver/group of approvers need to be informed

Here is an approach that was designed by our functional team :
You create an approval group that has just one member and when delegation is required the contract admin can add a new user to that group. This will ensure that approval goes to the delegated user as well.
Of course, the delegated user should be removed from the group once he/she is no more needed.
It involves some manual work but this is an appropriate solution given the restricted functionality of SAP Sourcing in this case.
Members can share their views on this topic as well.
Thanks
Devesh

BC Set for RFX Without approval

Similar Messages

Maybe you are looking for