BC SETS creation and usage for sap mm point of view

Hi All,
Need Information About BC SETS creation and usage from sap mm point of view.
Thanks in advance for sap mm forum guys.
Regards.
Parameshwar.

Hi,
Customizing settings can be collected by processes into Business Configuration Sets (BC Sets). BC Sets make Customizing more transparent by documenting and analyzing the Customizing settings. They can also be used for a group rollout, where the customizing settings are bundled by the group headquarters and passed on in a structured way to its subsidiaries.
BC Sets are provided by SAP for selected industry sectors, and customers can also create their own.
When a BC Set is created, values and combinations of values are copied from the original Customizing tables into the BC Set and can be copied into in the tables, views and view clusters in the customer system. The BC Sets are always transported into the customer system in which Customizing is performed.
Advantages of using BC Sets:
1.     Efficient group rollout.
2.     Industry sector systems are easier to create and maintain.
3.     Customizing can be performed at a business level.
4.     Change Management is quicker and safer.
5.     Upgrade is simpler.
To create BC sets follow the below step:
Choose Tools ® Customizing ® Business Configuration Sets® Maintenance in the SAP
menu, or enter the transaction code SCPR3 in the command field.
Choose Bus.Conf.Set ® Create.

Similar Messages

Document Management System for sap mm point of view steps

Hi All.
Document management system for sap mm point of view steps required.
Thanks in advance for all sap mm forum members.
Regards.
Parameshwar

Hi,
Customizing settings can be collected by processes into Business Configuration Sets (BC Sets). BC Sets make Customizing more transparent by documenting and analyzing the Customizing settings. They can also be used for a group rollout, where the customizing settings are bundled by the group headquarters and passed on in a structured way to its subsidiaries.
BC Sets are provided by SAP for selected industry sectors, and customers can also create their own.
When a BC Set is created, values and combinations of values are copied from the original Customizing tables into the BC Set and can be copied into in the tables, views and view clusters in the customer system. The BC Sets are always transported into the customer system in which Customizing is performed.
Advantages of using BC Sets:
1.     Efficient group rollout.
2.     Industry sector systems are easier to create and maintain.
3.     Customizing can be performed at a business level.
4.     Change Management is quicker and safer.
5.     Upgrade is simpler.
To create BC sets follow the below step:
Choose Tools ® Customizing ® Business Configuration Sets® Maintenance in the SAP
menu, or enter the transaction code SCPR3 in the command field.
Choose Bus.Conf.Set ® Create.

Zgate abap development inputs need for sap mm point of view

Hi All.
Loooking for sap mm zgate module inputs.
Thanks in advance sap mm forum members.
Regards.
Parameshwar

ABAPer with some functional inputs helped to develop it
Edited by: paramerp on Aug 5, 2011 2:32 PM

Message "Creation of DataSources for SAP source system is not permitted"

Hi,
I am in DW Workbench: Modeling and I need to copy a DataSource.
It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
What can I do?
Thks

Hii.
You can not copy the standard datasource to any other source system it will not allow you to do that.
But if you want to copy you can copy it to PC FILE source system.
It will allow you to copy there.
Right click in Datasource->Copy-> Give Target datasource name -
> intarget Source system tab -
>Give Source system for File.
Thanks
Mayank
Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

Quotation Creation and Billing for Service Orders--node details needed

Hi ,
I need to work on node "Quotation Creation and Billing for Service Orders" ....I see lot of integration with SD and FICO . Can any one give details about integrations required and what is done in this node ....
Regards
NPB

There are different steps to be done for that.
1. Create DIP Profile in ODP1 & check the consistency in ODP2 - DIP will be used to bill the customer based on resource (labor & material) usage. Creation of DIP profile has been discussed many times in this forum. Please check.
2. Assign the Quotation document type & Billing type used in DIP profile to your sales area - Your document type should be assigned to your sales organisation, distribution channel & division combination.

Setting the default resolution for sap logon

Hi, ALL!
I'm terribly tired of SAP interface. It's so uncomfortable for work.
For example maybe you know khow to set the default resolution for sap logon to make it use its widgets of proper size. e.g. when i work with transfer rules, it has only half of screen for useful area (i use 1400x1050), and right part is just empty, but on the left very many small fields and you should constantly use scrollbars (i think you know it well). Maybe there is system customizing for this purpose.

Hello Dmitry,
There is no customizing for this - atleast to my knowledge.
However, you should have to redo the settings again and again unless you are continuously re-sizing the main window.
Cheers
Aneesh

Automatic TO Creation and Confirm for the 321 Mvt type

Hello Experts,
Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
I have already activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe
2.TO item to be confirmed immediately
3.Propose confirmation
Table T333 -AUTTA
          T333-SQUIT &
          T333-VQUIT is activated.
Please let me know any other settings to be performed
Regards
Krishna

Hello Experts,
I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
I made the below settings
I have activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe   -"A"
2.TO item to be confirmed immediately - tick mark
3.Propose confirmation   - tick mark
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
I have activated in OMKX as below
Table T321-TBFKZ Immediate TO Creation with "A"
T321-TAFKZ TR creation with "X"
After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
Thanks & Regards
Krishna
Edited by: Hariharan krishna on May 25, 2011 8:01 AM

How set UserName and Password for HTTP Basic Authentication for a servlet

Hi..
How set UserName and Password for HTTP Basic Authentication for a servlet in JBoss server?
Using Tomcat i can do it .(By setting roles in web.xml, and user credintails in tomcat-user.xml).
But i dont know how do it in JBOSS..
I am using Netbeans and Eclipse IDEs.. Can we do it by using them also!?
Thank u

Hi Raj,
You can do this by creating a Login screen for the users and check the authentication of each user in PAI i.e. PROCESS AFTER INPUT.
Store the user information in a database table and check the username and password when the user enters it.
You can display password as *** also. For this double click on input box designed for password and goto Display tab. Select Invisible in the list and check it.
CASE sy-ucomm.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN <fcode for submit>.
      SELECT SINGLE uname pwd
       FROM <DB table>
       INTO (user, pass)
       WHERE username = user AND
               password = passwd.
      IF sy-subrc = 0.
<Go to next screen for further processing>
      ELSE.
<Display Error message and exit>
      ENDIF.
ENDCASE.
Regards,
Amit
Message was edited by:
        Amit Kumar

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
Thanks,
Sreenivas

Hi Sreenivas,
I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore. Your Discussion will most likely get reported as non-specific and get removed. If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed. There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having. If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
Regards, Mike
SAP Customer Experience Group - CEG (and a Moderator)

Define suitable labels and descriptions for an entry point.

Hi All,
I have tried to define suitable labels and descriptions for an entry point. I am following the documentation:
http://help.sap.com/saphelp_nw04/helpdata/en/36/8b6b4066d9bf49e10000000a1550b0/content.htm
I have done all those steps as per the documentation. But it is not working. I am not getting any display change for my entry point folder.
Any idea of what to do?
Please help me out.
**Points will be rewarded for a suitable answer.
Regards,
Uttam.

Hi,
in side project folder src.api:
package: com.XXX (Created File Label.properties)
=_d=Description
package: com.sap.netweaver.rf.wrapper
Class: IRFServiceWrapper.java
import com.sapportals.portal.prt.service.IService;
public interface IRFServiceWrapper extends IService{
public static final String KEY = "com.XXX";
Class: RFServiceWrapper
package com.sap.netweaver.rf.wrapper;
import com.sapportals.portal.prt.service.IServiceConfiguration;
import com.sapportals.portal.prt.service.IServiceContext;
import com.sapportals.wcm.crt.CrtClassLoaderRegistry;
public class RFServiceWrapper implements IRFServiceWrapper{
private IServiceContext mm_serviceContext;
Generic init method of the service. Will be called by the portal runtime.
@param serviceContext
public void init(IServiceContext serviceContext){
mm_serviceContext = serviceContext;
// only NW04: CrtClassLoaderRegistry.addClassLoader(this.getKey(), this.getClass().getClassLoader());
CrtClassLoaderRegistry.addClassLoader(this.getClass().getClassLoader());
This method is called after all services in the portal runtime have already been initialized.
public void afterInit(){
configure the service : @param configuration
public void configure(IServiceConfiguration configuration){
This method is called by the portal runtime when the service is destroyed.
public void destroy(){
This method is called by the portal runtime when the service is released.
public void release(){
@return the context of the service, which was previously set by the portal runtime
public IServiceContext getContext(){
return mm_serviceContext;
This method should return a string that is unique to this service amongst all
other services deployed in the portal runtime.
@return a unique key of the service
public String getKey(){
return KEY;
Config file portalpp.xml
Bundle File : com.XXX.Labels
I hope that it works to you
Greeting Toni Guzmá

Difference between SAP 4.7 and ECC 6.0 -- SD point of view

hi guru`s
Can anyone tell me the difference between SAP 4.7 and ECC 6.0 -- SD point of view
4.7 already implemented now upgradetion to 6.0 what is major role as a SD consultant,
Thanks advance ....
regards ...
patchala

HI
Kindly Check below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0888cfb-073b-2c10-0dbf-99b5c772eb39?QuickLink=index&overridelayout=true
Regards,
Prasanna

Handling Unit Information from sap mm point of view

Hi all.
Looking for Handling Unit Information from sap mm point of view.
Regards.
Parameshwar
Note : Please search forum before posting.
Edited by: Jeyakanthan A on Sep 22, 2011 1:20 PM

Please refer the below links
http://help.sap.com/printdocu/core/print46c/en/data/pdf/LOHU/LOHU.pdf
http://help.sap.com/bp_bblibrary/600/html/G74_BB_EN_US.htm

Please update me migration activity plan in sap mm point of view

Hi,
In our company, we have two company codes have two plants each one, Now management decided to these two plants in to one company code existing, please update me migration *** Merger activity plan in sap mm point of view?
Padma
Edited by: padmap on Apr 14, 2010 7:08 AM

I guess it can be done. You need to cut all links of plant to the existing company code in ENTERPRISE STRUCTURE, and then reassign the said plant to the other company code.
Edited by: Afshad Irani on Apr 14, 2010 11:23 AM

Levels of planning from sap mm point of view

Hi All.
Need Information On Levels of planning from sap mm point of view.
Thanks in advance all sap mm forum guys
Regards.
Parameshwar.

Please check
[MRP Areas|http://help.sap.com/saphelp_46c/helpdata/EN/c4/106956ae8a11d1a6720000e83235d4/frameset.htm]
[http://help.sap.com/saphelp_46c/helpdata/EN/c4/106956ae8a11d1a6720000e83235d4/frameset.htm]

Sets of Question Papers and answers for SAP ECC 6.0- FICO Module

Hi,
If anybody has some material on sets of question papers and answers of SAP ECC 6.0 FI- CO Material please mail the same on [email protected]
Useful replies will be awared points.
Regards
Milind Nair

Hi,
Please refer the below link and reward if helpful.
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/de86f335cd11d3acb00000e83539c3/content.htm

BC SETS creation and usage for sap mm point of view

Similar Messages

Maybe you are looking for