BC Sets for Product Compliance

Hi guys,
We are looking at option of copying customization table values using BC sets for Product Compliance.
I don't think we can use BC sets for Incident Management and Risk Assessment part.
However I know you can use BC sets for product compliance part so my question is how do we use
BC sets? Any documentation/link or suggestions on what are the steps?

Dear D M
we are not using BC sets. I have only come in touch with them using EHS classic and not EHSM.
Check may be this SAP online help to get some ideas:
Business Configuration Sets (BC-CUS) - SAP Library
C.B.
PS: you can execute in any case what is known as an "cross transport"; This option should be well known (I assume) as it it one "classical" solution to get one configuraiton from one SAP system to a different one (pay attention: Release status should be the same; but this is true as well for BC sets).
this is nbot the same as using a BC set !

Similar Messages

Custom metadata sets for Productions?

I've added a new metadata set that suits our needs, but it is not showing up as an option when creating a new production - is there some option that I missed in order to allow this, or is there a completely different process involved with creating a new metadata set for production folders? Can someone tell me what I missed or walk me through how to do that? Thank you!

Did you make sure to assign the new MD Set to Productions and not Media? If so there must be something else wrong with the way you set it up. Make sure the ID says:
paproductionyourmetadatasetname
If it does not ID this way it will not show in new Productions.

Credit Limit set for Product wise

HI ,
We have a requirement of Customer credit limit has to set at Product ( Material) level , can it be achieved through FSCM Credit Management .
Say Customer A has Deal with Product X and Product Y , Product X credit Limit : 100000 , B = 200000 overall 300000 for Customer A.
Regards,
klreddy

Hi ,
As I discribed in example , Sales is to Single Customer , but sales contain multiple products . As a Business Credit Policy , we required to set up credit limit for each product wise to the same customer .
Any further information , if you feel , please revert.
Regards,
Klreddy

Delivery Date not Set for Production Orders

Hi,
I am trying to settle a MTS (make to stock) production order that is both CNF and DLV. When I try to calculate variances, I get a KV 239 message stating that the delivery date is not set. I set this order to TECO and went to recalculate WIP but the production order cannot settle because this error still remains. When I drill down on the error, it states that there was an error in the program which set this order to DLV status, when no delivery date has been set. I can't see where this is looking for the delivery date. Has anyone come across this issue and if so, how would I go about correcting this?
Thanks!

Sorry, posted in the wrong forum.

Decimal setting for product

Hi All,
Here for a product price for B2B is comming as 11,435(3 decimals) when ordering in order.jsp. Let me know how to fix this issue.
Note: We are not using IPC.
Regards,
Devender V

Hello Mark,
Sorry for not providing complete information.
This apprears while order is created.
But here price is coming in 3 Decimals(eg: 11,456), And the requirement is make it to 2 decimals.
My question would be where to correct this :
1) We are not using IPC, So from where this price is determined. Can we make change at back-end.
2) Where we can make front end changes.
Regards,
Devender V
Edited by: devender on Jul 12, 2010 10:03 AM

Reg.Authorisation for Production Order

Hi all,
Please tell me that whether Authorisation can be set for Production order Releasing or not.
My requirement is One person will generate Production But he is not authorised to release it.
The Other Person who is senior to him is the only person who is authorised to release the Prod.Order.That is once the Prod. order is generated & saved ultimately a message should reach the senior person with the details of prod. order for him to release.
How to do it.
Kindly Give solutions .
Thanks in advance,
M.Badrinarain.

Badrinarain,
You can use user exit PPCO0007 to serve your purpose.
Regarding the info to reach the senior person, you can talk to your Basis consultant to have the required settings, when any new order is created, it will be informed via mail to the senior person.
Hope this helps you.
SmanS

Log frequence for productive system

Hello!
We use SAP DB (version 7.7) and use auto log function.
We configured the redo log frequence so, that every 10 minutes a new redolog will be written to hardware drive.
Question:
How does this setting (log frequence of 10 minutes) affect the performance of the SAP system?
And which setting (every 10, 20, 30 minutes) should be set for productive system?
kind regards

> My question is about the log settings. Untill today the redo logs were written to the drive, when the max. size of redo log (appr. 1 GB) has been reached.
> Now I changed this settng, so I have every 10 minutes a new redolog file on the hardware drive.
So again my question: Why did you change that? What was the reason to do so?
> The questions:
> Does this frequence (10 minutes) affect the performance of the server (network, SAP system, DB)?
The default max time between database savepoints is 600 seconds - so 10 minutes.
> What is the recommended setting to redolog setting for productive systems?
There is no recommended setting for that, it all depends on what you are trying do. If you want e. g. a shadow database running "after" the production database for 10 minutes, then you use that 10 minutes setup. If you want an hour you configure an hour etc.
It's all based on your setup and what you want to do.
Markus

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set Blocking Indicator for product specific TransportationLanes?

Hi All,
I'm facing a problem while trying to set the blocking indicator for product specific Transportation Lanes-external procurement.
How can i proceed on the same?
I've figured out 2 methods for blocking the product specific TLanes.
1. using /SAPAPO/TR_TL_TRANSFER_BAPI.
2. using BAPI_TRLSRVAPS_SAVEMULTI.
I tried using the BAPI - /SAPAPO/TR_TL_TRANSFER_BAPI, which comes inside the DELETE BAPI - BAPI_TRLSRVAPS_DELMULTI. Although I had passed the parameters reg. external procurement, nothing seemed to be happening in the system. There was no blocking indicator - D(locked and flagged for deletion) set against the subjected TLane. In fact, to my amazement, the BAPI didn't return even a single msg. BAPIRETURN internal table after execution was empty.
Here, I'm passing:
(IV_LOGQS) TYPE /SAPAPO/LOGQS
(IV_LOGSYS) TYPE LOGSYS
(IV_CALLER) TYPE /SAPAPO/MD_CALLER
(IT_TR) TYPE /SAPAPO/TR_TTD_TR
(IT_TR_X) TYPE /SAPAPO/TR_TTX_TR
(IT_TRPROD_SRC) TYPE /SAPAPO/TR_TTD_TRPROD_SRC and
(IT_TRPROD_SRC_X) TYPE /SAPAPO/TR_TTX_TRPROD_SRC
I haven't tried on the second method yet. Is there any other programming alternative for setting the blocking indicator of a TLane / multiple Tlanes?
Could anyone pls explain and guide me on a suitable method to be chosen and the process to be followed, parameters to be passed, etc.

Hi Sanjay,
Use the standard BAPI: BAPI_TRLSRVAPS_SAVEMULTI2 (according to SCM version you are using)
to update the deletion flag for product specific T-lane, in this BAPI you have to pass the data to EXTERNAL_PROCUREMENT parameter table in which LOCKED_FLG field is there in which you can pass the "D" for deletion or block flag.
Also you have to pass the same entries in EXTERNAL_PROCUREMENT_X parameter table of this BAPI.
If any further help required, refer the documentation of BAPI or let me know.
I hope this will help you to solve the issue.
Regards,
Saurabh

Set type COMM_PR_UNIT is not allowed for product type

Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa Rodríguez

Rosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish

Set default value for product type

I want to set default value in product type drop down box
in component PRD01QR.
view SearchHelp.
I tried with setter and getter , but not working
they are using query string.

Hi,
You can achieve this by redefining the method GET_VH_PRODUCT_TYPE() in IMPL class of searchHelp view. Just copy paste the implementation of this method from super class and now control the internal table as per your requirement like
comment out the line APPEND INITIAL LINE TO lt_ddlb. (line no: 47)
as it will add an empty line at the starting of internal of product type values which you dont want. In you case there should be some default value for product type field, so arrange the inetrnal table values according to you requirement and what ever value you want to default for product type that should be the first value in the drop down without empty line and add an empty line at the end of the internal table.
No need to call super->GET_VH_PRODUCT_TYPE() in your implementation as you have written all the required code in your implemenation itself.
Hope this would help you!
Regards,
Ajay

How to make JOB CONTROL setting for delta extraction in Production system .

Hello All,
We are in the process to transport our development to PD server in BI . We have transported the data sources to ECC production and now we are filling the setup table for " SD BILLING BW " . After filling Setup table data in full mode through infoPackage we have to load data in delta mode .
How we can set our Update mode(LBWE setting) in PD server ?
Is LBWE T.Code authorisation required in ECC PD server to make the setting of Update mode or We have to set all Job Control Paramater in Dev System at the time of transport the datasource request to ECC production . Is our time which is set in job control of ECC development will be reflected in ECC production ?
can any body tell me about how to make setting for delta extraction in Production system .
Thanks ...

Hi,
How do you load the data in the development system?
- you set up the update mode in the infopackage. There you must customize "Initialization"
- you have to filled the setup table in the production system without laoding the data in the BW? then this step was for nothing. Filling the setup table and do the INIT in the BW, this must be together - during no changing will be done in your R/3 SD.
Sven

SAP GRC 5.2 Compliance Calibrator rule sets for HR module

HI All,
The company i am working for has done installation of GRC 5.2. I would like to download the SAP out of box Compliance Calibrator rule sets for HR function module in a spreadsheet format.
I would like to download the rule set for risks at Function level, Tcode level and also at authorization object level in ABAP and Roles, actions and permissions in JAVA.
I will discuss with the BPAs, internal auditors and come up with a new rule set exclusively for my company needs with the help of the above spreadhseet.
Please tell me what steps i need to do to get this thing done.

Please go through the process but save these as txt files for UNIX. I am not sure about 5.2 but CC4 was not uploading rule files correctly if file was not saved for TXT for UNIX.
Regards,
Harry Sidhu

Client setting option for Productive solution manager

Dear all expert,
I've set in transaction code SCC4 (client setting) for my productive solution manager:
1. "No changes allowed" for changes & transport for client-specific object
2. "No Changes to repository and cross-client customizing objs" for cross-client object changes
However with above setting, when execute Tcode SOLAR01 & edit the structure/document, I am not allowed to save it, getting the error "Changes to Repository or cross-client Customizing are not permitted".
could anyone please advise what is the correct setting for the solution manager?
please help
thank you

Hi Pradeep,
User just need to edit/upload new documentation to the project SOLAR01, and this is not allowed because of the system setting
By the way, do you know any method that I can restrict user to edit the 'Structure' tab, but only allow them to upload & edit the documentation under 'project document' tab?
the recommendad way will be we always setup the project & complete in development system & then finally transport to productive solution manager without any further changes anymore?
please advise.
thank you

SETTING DELETION FLAG FOR PRODUCT COST COLECTOR:

Hi Gurus, could you please help me with this question:
We need to turn off the repetitive mfg
indicator active for a group of materials. this in order to replace product collectors to production
orders.
When I tryed to set the deletion flag for product cost colectors, SAP
Shows this message :
"THERE ARE STILL UNSETTLED VARIANCES FOR ORD 710040".
Cheking Note "421710 - Check report whether "Deletion flag" status can
be set" I found the program COPC_COSTOBJ_REORGCHECK , this program
shows that I have Unsettled variances since 2004...
The order have a settlement rule PER, So I can't settle 2004
variances.. checking the note 421710, I Found that other way is to turn
off the field indicator "variance to costing-base PA" in OK07.
Must I turn off the field "variance to costing-base PA" temporaly, in order to close de cost colectors ?
there are another program or report that I can use in order to settle the old variances?
Message was edited by:
Andres Moreno

REWARDED POINTS AVAILABLE !!!!!!

BC Sets for Product Compliance

Similar Messages

Maybe you are looking for