BC-XOM - "data direct" RFC is receiving ##'s -from ECC 6.0 Unicode to Esker

When using BC-XOM sending
From - our Unicode ECC 6.0 system
To - Esker Deliveryware system
Esker is receving only ##'s during connectivity testing
There are some discussions surrounding that SAP no longer supports BC-XOM "data direct" RFC interface but that they do support "data by file" use with BC-XOM
Possible issue --
Perhaps the ###'s are being received by Esker due to their inability to handle Unicode receipt correctly?
Feedback / thoughts?
Any insite as to SAP's use/support of BC-XOM data direct vs. alternative use of BC-CON
Trying to get around this .......

Hello Doreen. If you are still experiencing the same issue,
call esker's tech support and tell them to give you the unicode patches for their servers. I know they have them.

Similar Messages

SEM-BCS data extractor from ECC general ledger table(s)

We are a utility company working on an SEM-BCS implementation and use the FERC solution. We do not use the new GL. We are trying to extract the transaction data from ECC to a BI virtual remote cube. We cannot use the profit center extractor (0EC_PCA_3) as the profit center tables do not contain any ferc data. We need to be able to extract the transaction data from a general ledger table. We have run into several issues with various extractors we have tried because they donu2019t allow direct access (0FI_GL_4) or are at a summary level and we canu2019t extract group account, trading partner, and transaction type detail (0FI_GL_1). Would you have any suggestions on how to extract general ledger data with the detail information required from ECC to be able to load to a BI virtual remote cube?

We are going forward with getting the natural account detail data using the profit center extractor 0EC_PCA_3, and getting the ferc summary data using the general ledger extractor 0FI_GL_1. With our testing so far, this combination will provide us the data we need in BCS.

Droid unable to receive text from iphone

I have a Droid and am unable to receive texts from a contact with an AT&T iphone. I can send this person texts and they go thru fine but I am unable to receive their texts. Any known glitches?....solutions? Thanks!!!

Make sure you have DATA turned on when receiving texts from iPhone users. I often keep my data off to save battery, then cant open texts from iPhones. Turned data back on then was able to get them.

Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

Hi All,
I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
Please help me as to how to resolve this issue.
Thanks in advance,
Shubham

Hi Shubham,
Please check the queues in SMQ2 and what status they are showing?.
Thanks,
Faisal

Soap Sender and RFC Adapter receiver getting APPLICATION_ERROR

Hi, all,
I have a webservice soap sender and RFC Adapter receiver scenario, it works fine with RFC "RFC_SYSTEM_INFO", When i tried the RFC "RFC_READ_TABLE", getting the following error message, <SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code> in
SXI_MONITOR, in webservice client, i am getting error message like this:
<faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <rfc:ZZTEST_RFC_READ_TABLE.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
               <Name>TABLE_NOT_AVAILABLE</Name>
               <Text>QUERY_TABLE not active in Dictionary</Text>
            </rfc:ZZTEST_RFC_READ_TABLE.Exception>
Thanks a lot!

Hi
Its not compulsory but its good to wrap it as Z object.
Well if you are facing problem with SOAP data. Then try to do one thing. Check with the data you received from SOAP message. If this works
Then try to check in mapping is it passing the data correctly or not. With this check with the user authorization PIAPPLUSER. if its having less authorizations to execute this BAPI in ECC
Thanks
Gaurav

Setting up the HR-PDC interface to ext. system without direct RFC

Hello,
Setting up the HR-PDC interface to external system without direct RFC - Uploading time events
Following note number 647145, I tried to set up connection to external time collection system. As the external system isn't able to work with RFC, I setup a fileport using transaction WE21. When an outbound IDOC is created with transaction PT80, it will be stored at the outbound path. The IDOC then will be transfered to the external system with a unix script triggered by event.
For inbound IDOCS, the fileport cannot be used as I don't see any way to configure it as the time events that should come in via RFC port, will be uploaded and processed according the ALE distribution model. The BOR object "PTManagerExtPEvent" of type "BUS7014" with method "Insert" is used to insert the time events into the interface table CC1TEV from an HR-PDC certified subsystem. The message type is "HRCC1UPTEVEN".
As standard process won't work in our case, I'd need alternative solution. Actually the time events are send via ftp to the SAP directory that points to incoming IDOC path setup on WE21.
Maybe there should some way to setup RFC connection to own SAP system that points to the SAP directory where the inbound files are stored.
Maybe using the FM IDOC_INPUT_HRCC1UPTEVEN can be used to trigger the upload manually but first the files have to be uploaded from file similiar to report RSEINB00. Testing this report using the SAP directory and port where the inbound files are located I get error message that IDOC control record is missing, that seems to be understandable as this report is used to upload IDOCS from file but HR-PDC upload file HRCC1UPTEVEN01 has no specific IDOC segments in this moment as it was created according specific HR-PDC interface description. The IDOC in the standard process will be created with the BAPI.
As I'm new in HR and ALE, I'd be grateful for any help on this matter.
Best regards
Andreas

Hello Andreas,
thanks for Your contribution. Recently I've got the trial version and made some tests and found out that the bapi-handler works perfectly for managing HR-PDC interface.
Nevertheless actually there's no compilation for OS/400 and the AS/400 I'm working with has an old OS release without C compiler and furthermore RFC libraries of SAP cannot be installed on this release.
The Bapi-handler for testing runs on Windows
and I'd need an intermediate machine to manage the data between AS/400 and SAP. I'd prefer direct connection between timecollection subsystem and SAP for obvios reason.
Regards
Andreas

BPM- scenario RFC - XI - receive file - - SOAP - return answer to RFC

Hello everybody,
I have the scenario
RFC call a BPM
In the BPM, I have to receive information from a file ( generated by another system 4 times in a day)
Mix the data of the file with the data of RFC
Send them a SOAP
send the reply to the RFC
My problem is : how to receive the file on demand because in file adapter ( sender ), the definition is only by interval of time?
Is there anybody who can help me?
Thanks in advance and best regards.
Eric.

Hi Eric,
in sender file adapter, we just have polling interval - so in your receive step in BPM you have to wait for the source file.....
i do not think any other workaround will be feasible for your this case
Regards,
Rajeev Gupta

How to transfer data of RFC into Internal Table inside a WD4A program?

Hi Experts,
I have created WD4A program. This program calls RFC. The output of RFC has to populate a UI table. THe different cells of the table should have different color based on data.
I have gone through following link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/707fb792-c181-2d10-61bd-ce15d58b5cf1
The above link fetches data from directly from table. Then it passes the data into internal table.
If I am using RFC, then how I can insert data of RFC into a internal table in WD4A program (se80 In drop down Web Dynpro Comp / Intf)
My motto is to have table ouput whose different cells should have different color based on data.
Please help.
Regards,
Gary
Edited by: Jason Lax on Dec 28, 2011 2:52 PM (Fixed broken link)

Hi Experts,
I have resolved the issue. I have created WD4A program. This WD4A program calls the RFC.
The RFC has a structure as export parameters called 'RESULT_FINAL'. I have altered the associated type of this table export parameter. I added Component 'Color' of component type 'WDUI_TABLE_CELL_DESIGN'.
In the RFC I have added some code. The code is as below:
loop at it_t1.
      select pernr from pa0000 into table it_t2 where pernr = it_t1-pernr and stat2 ='3'
      and begda <= sy-datum AND endda >= sy-datum.
      if sy-subrc = 0.
        result_final-org_unit = result_objec-objid.
        result_final-pernr = it_t1-pernr.
        result_final-name = it_t1-name.
        result_final-color = '02'.       append result_final.
      endif.
    endloop.
The line   result_final-color = '02'.
code returns Color.
In the WD4A program, I have changed the Cell Design property of selected table coloumn to Color.
This resolved the issue.
Thanks every one for the reply.
I have added above information for other SDN users.
I am closing this thread,
Regards,
Gary

Design options for interfacing RFC as Receiver

hello guys ,
Need some ideas in developing a scenario for interfacing RFC as receiver from a stored procedure call on DB side , what would be best and easy way to interface this RFC?
Best regards
Krishna

hi,
but what do you need to know?
you can call stored procureude with sender jdbc adapter
and put the data via RFC
it's better to use an abap proxy but if you cannot use the rfc
you don't need any BPM as this is a jdbc - rfc flow
Regards,
michal

Can I use LabVIEW to load data directly into system memory? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Win32 function to read the data from the card and now I want it to go directly to system memory.

Can I use LabVIEW to load data directly into system memory from a VI? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Call Library function to read the data from the card and now I want it to go directly to system memory.
The data is being received at 1Mbps.
Thanks

Two questions:
One, if it's a serial card, then presumably it gives you more serial ports, like COM3, COM4, etc. If so, VISA would see the COM ports, and not the card directly. The drivers for the card should make it so that you see the extra serial ports from the OS. If you don't see the extra COM ports from VISA, then it sounds like the drivers for the card are not installed properly. Do the extra COM ports show up in Device Manager?
Two, you said that you're using a Call Library function to get the data and you want to put it into system memory. Errr.... you just read the data and you have it in memory by definition. Are you saying you need a way to parse the data so it shows up on a graph or something?

Picking data directly from ALV List

HI experts !
I have a scenario in which the client is executing some tcodes ( Some hourly, some daily , some weekly, ome monthly ) and all the data gets displayed in alv list . The requirement is that is it possible for XI to pick that data directly from alv and update the data base?
OR
If the above case is not possible then the client is thinking of putting the data in a spool and then by running some program they fetch the data ?
Guide me on this ? how to execute such scenario?
Regards
saras jain

Create and outbound interface with needed datatypes and message types. Create a client proxu for this.
Create a report, which gets all these data in to internal tables and then call the client proxy from XI. You can have whatever adapter on the receiver side..
VJ

Append the data in file at receiver side

Hi All,
I want dump the data frm SAP tables. the data is hughe so we are sending the data in slots from ECC like 50K recoerds at a time and after that to collect that i using the append parameter at file receiver side and records are getting appended in file only that is correct
but my one doubt is
let say monday the records get append into file at receiver side and on tuesday again the records will get appended in same file....it will be problem for this i used create parameter with overrite my question if i am using create then we can not use append ........
please suggest...........
Regards

Hi gangadhar,
Append will work like this..
if there is no file ..create the file and if file already exists then appends the data to the existing file..
in your case when you create the file with day i.e file_day ..first time when you send 50K records file will get created..
if you send another 50k in the same then will get appended to the same...
in case if you send the another 50K set another day..then a new file will get create as there is no file available with taht file name
i.e filename_nextday...
Hope this clears all your queries
HTH
Rajesh

Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

What cable do I need to transfer data direct from my iMac to my macbook pro

What cable do I need to tranfer data direct from my iMac to my MacBook pro?

Generally, Ethernet or FireWire.
(71181)

How to Parse XML data directly from context variables in webdynpro

Hello,
   I have two requirements:
1) I have a context variable which has string value.
   I want to write the this value into a flat file.
   How do I do this in WebDynpro.
   Any sample code for this.
2) In Webdynpro, I want to parse and process the XML data directly from a string context variable which
   has the value in XML format.
   How do I achieve this. Any pointers or sample codes for this.
Thanks and Regards,
Anupama.

Anupama,
Here is some link which talks about unpacking xml and converting to HTML.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/eb/3dfb402eb5f76fe10000000a1550b0/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/eb/3dfb402eb5f76fe10000000a1550b0/content.htm</a>
I have done something like this in portal development and not in webdynpro.But in principle it should work very where.

BC-XOM - "data direct" RFC is receiving ##'s -from ECC 6.0 Unicode to Esker

Similar Messages

Maybe you are looking for