[BCA 6.5]error of automation disconected of his client

Post Author: OpBO
CA Forum: Publishing
Hi,
All my reports doesn't work because i have an error of automation disconected of his client.
All my reports refresh and save in Excel. Before It works but not yet.
Excel wasn't install on the server.
Thanks

Hi Wendi,
From Quark's site:
Techniques to Recover the QuarkXPress document
If no backup is available, try copying the document between volumes. By dragging the document to a different disk or drive, you may be able to reopen the document after it is rewritten.
If you have access to QuarkXPress on another platform, try to open the document on that platform. Sometimes, the document will open without any problem on a different platform. Then, the document can be resaved and brought back to the original platform.
Try opening the document using Microsoft®Word with the “Open all Files” option. If possible, this will open the document and show all the text and other items as raw text. All styles, formatting, and layout items will be lost.
For the Mac OS, you can use third-party XTensions® software available called MarkzTools III™ from Markzware. It may be able to rewrite the file header of your QuarkXPress document. Depending on the degree of damage, this may allow you to open the document. For more information about MarkzTools III, contact Markzware at 800-300-3532 or www.markzware.com
If that doesn't work are you able to copy the text from the PDF's and import it into a new document in Quark?
Jrsy

Similar Messages

Error -2147024714 : Automation Error the operating system cannot run %1'

Post Author: greg.thompson
CA Forum: General
After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

Post Author: greg.thompson
CA Forum: General
After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

Error message: Automation server can't create object

Hello
I'm currently receiving the error message: 'Automation server can't create object' when trying to view reports. This only happens when i try to view them through the IIS server using the .net launchpad. It happens with both reports that i have produced and Feature example reports, it also happens from both client machines and the server.
Any ideas on how to fix this issue?
regards
Matt

Hi,
I am not sure if you still are having this issue. In my experience I have seen this issue if for all the BO related services the rights are not proper. These have to be given from dcomconfig.
Hope this helps
Amit

Validate memberset:error 440-Automation error

Hi,
While refreshing the data in the EVDRE, the following error is witnessed-"validate member set:error 440-automation error".This is on BPC 5.1 SP3,MS office 03.Any interpretation on this error is well appreciated.
regards
savi

Hi, Savi!
Maybe you have a NOEXPAND command in one of your expansions?
I encounter the same problem as you do and in my case it is due to a NOEXPAND command. (I have SP5 installed.)
Unfortunately I cannot leave this command out. So the issue cannot easily be solved in my case. But maybe this helps you...
Best regards,
Hartmut
P.S.: A colleague just said that I can simply delete the entries for this expansion to avoid the expansion. After deleting these entries you will have to adjust the referenced area in the evdre-command.
Still, this is a workaround. But this actually saves my input schedule. Hope, it helps you, too!
Edited by: Hartmut Kesper on Nov 12, 2008 1:44 PM

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error invoking Web Service from Java client

Hi
I have created an ALSB Proxy service and exposed it as a web service. I have created a Java Client the code for which is pasted below:
     String ENCODING_STYLE_PROPERTY = "javax.xml.rpc.encodingstyle.namespace.uri";
     String URI_ENCODING = "http://schemas.xmlsoap.org/soap/encoding/";
     String url = "http://localhost:7001/Dummy_ALSB_Project/proxy/Dummy_Proxy_Service?WSDL";
     String TARGET_NAMESPACE = "http://www.bea.com/servers/wls810/samples/examples/webservices/handler/log";
     QName xsdString = new QName("http://www.w3.org/2001/XMLSchema", "string");
     ServiceFactory factory = ServiceFactory.newInstance();
     QName serviceName = new QName(TARGET_NAMESPACE, "LogHandler");
     QName portName = new QName(TARGET_NAMESPACE, "ProcessSoap");
     QName operationName = new QName("writeCustNameToFile");
     Service service = factory.createService(serviceName);
     Call call = service.createCall();
     call.setPortTypeName(portName);
     call.setOperationName(operationName);
     call.addParameter("param0", xsdString, ParameterMode.IN);
     call.setProperty(ENCODING_STYLE_PROPERTY,URI_ENCODING);
     call.setProperty(Call.SOAPACTION_USE_PROPERTY, new Boolean(true));
     call.setProperty(Call.SOAPACTION_URI_PROPERTY,"");
     //set end point address
     call.setTargetEndpointAddress(url);
     call.invoke(new Object[]{ "The Joshua Tree" });
When I run the service, I get the following error:
java.rmi.RemoteException: BEA-380001: Internal Server Error
     at com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:524)
     at TC.methodB(TC.java:67)
     at TC.main(TC.java:9)
Any clues about what is going wrong?? Thanks in advance.

It's recommended to use the same verison of client and service.

ORA-27092 Error while executing any query from client

Hello
I am getting following error while executing any query from client remotly.
IAMDBA@TEST_OAT.ABCD > select userid from dual;
select userid from dual
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 1
ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
ORA-27092: size of file exceeds file size limit of the process
Additional information: 131071
Additional information: 286209
But while local connection,its working.

hi,
ulimit command- Limit user resources
su - oracle
ulimit -n (this command will show you the current value for ulimit the default value is 1024)
to increase its value:---
ulimit -n <some value> ( this command will change value for current session only)
example
ulimit -n 101062
once done check the value as:--
ulimit -n( for verification)
search in google for more explanation or revert back to me for any suggestions.... :)
Edited by: varun4dba on Jan 31, 2011 4:09 PM

Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?

Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?

Outlook 2013. Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".

[svn:bz-trunk] 15217: Bug: BLZ-508 - If server receives message for an unknown destination it shouldn ' t include the destination name in the error message sent back to the client .

Revision: 15217
Revision: 15217
Author:   [email protected]
Date:     2010-04-05 03:43:36 -0700 (Mon, 05 Apr 2010)
Log Message:
Bug: BLZ-508 - If server receives message for an unknown destination it shouldn't include the destination name in the error message sent back to the client.
QA: Yes
Doc: No
Checkintests: Pass
Details: Changed the error message to not include destination id. I'm also checking in a few minor fixes I had locally.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-508
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
    blazeds/trunk/modules/core/src/flex/messaging/cluster/JGroupsCluster.java

Thanx Mete, yeah i did...
but i solved it some other way... not entirely sure this was
it though as i was doing a lot of things at once...
it was fds.swc... possibly it was out of date or missing.

A fatal error occurred while creating an SSL client credential. The internal error state is 10013.

Hi All
I am seeing the below event appearing in the system log on all our Exchange 2013 servers regularly. I am not seeing any connectivity issues between any clients and the servers and no other issues have been reported at this stage.
Log Name:      System
Source:        Schannel
Date:          10/04/2015 9:21:17 AM
Event ID:      36871
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:
Description:
A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
I am not sure if its related to the public certificate we are using or if its related to the one provided from the local CA.I have searched and found other links that suggest it could be related to SSL versions being disabled etc.
All servers are running Windows 2012 R2 Datacenter. The Exchange CAS servers do also sit behind a pair of F5 BIG IP Load Balancers
Any suggestions on where to look?
Thanks

Hi,
According to the event log, the issue is related to Schannel instead of Exchange.
Please try the following steps:
1.In Control Panel, click Administrative Tools, and then double-click Local Security Policy.
2.In Local Security Settings, expand Local Policies, and then click Security Options.
3.Under Policy in the right pane, double-click System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing, and then click Enabled.
4. Ran gpupdate /force
If it doesn’t work, please go to C:\ProgramData\Microsoft\Crypto\RSA and grant "Network Services" Read permission to "MachineKeys" folder. Then restart server to have a try.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/lync/en-US/e70a8dbc-6f48-4fde-a93b-783554344822/a-fatal-error-occurred-when-attempting-to-access-the-ssl-client-credential-private-key?forum=ocscertificates
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

ERROR - clsid-not-found(Object::Remote::CLIENT|(Object::Remote::PROTOCOL_LOCAL|PSQL::TrayAppSvr:: 00000001)CID_SafeArchive::FileArchiveCache))

Hi,
I have Windows 7 Professional (PT) installed with Adobe Master Colection CS 6. The error "clsid-not-found(Object::Remote::CLIENT|(Object::Remote::PROTOCOL_LOCAL|PSQL::TrayAppSvr: :00000001)CID_SafeArchive::FileArchiveCache))" start to show a week after using the computer.
I don't know if the error it's from windows or from any software of the Adobe. How can i solve this problem?

Well "Protector Suite QL" is some security tool and apparently it requires authentication procedures and blocks access to critical system routines. You need to fix that. Nothing to do with Adobe at all.
Mylenium

Error 1603 installing microsoft sql native client

error 1603 installing microsoft sql native client
Sagar Chavan

have a look at this link
http://support.microsoft.com/kb/834484
Satheesh
My Blog |
How to ask questions in technical forum

Intermittent error when using the Disco Viewer client

Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!

Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael

Error-logical system not created in client 001

Hi Experts,
When I was trying to delete the application from Administration Client its giving me the error "Logical system not found on client 001"
I created the Logical system in 001 but still same problem...
Did I do anything wrong during the installtion??
Can anyone please help me
Bobby

Hi Experts,
I get the same error "Logical system not created in client 001"when I try to delete the appset from backend using program UJS_ACTIVATE_CONTENT...
Please suggest..
Thanks
Bobby
Edited by: bobbydon on Jul 7, 2010 7:46 PM

[BCA 6.5]error of automation disconected of his client

Similar Messages

Maybe you are looking for