BCB Contact Center Simulator
Hello Gurus,
I have a situation to demo the Telephony functionality to my client.
What is the configuration i need to do for setting up BCB application in CRM application?
What is the authorization object or role i need to have to access Contact Center Simulator in BCB application.
All your help is highly appreciated and valued.
Regards
Amar
Hi Amar,
Just follow the steps described in Stephen Johannes weblog located here:
The specified item was not found.
Please note that you need CRM java stack to be installed.
Kind regards and good luck!
Garcia
Similar Messages
-
Contact Center Simulation Steps
HI All,
I am trying to simulate CCS , by following a blog /people/stephen.johannes/blog/2008/05/21/crm-contact-center-simulator-setup .
I have acccessed BCB via http://<javahost>:<javaport>/bcb , but once i am into the screen,it asks to login as admin . i tried logging in with my usual user id , but its not allowing me and hence not able to simulate the phone call.
Any help or any other approach of simulating the call
Many thnx in advance
ChanduHi Chandu,
If you add the SAP_J2EE_ADMIN role to your user account, you should be able to log into the simulator.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com -
Contact Center Simulator - Authorization
Hi,
we have activated contact center simulator, however when we try to run it in the BCB/CCS administration page, we can't login and get "Cannot authenticate the user" message prompted.
any lead is really appreciated.
thanks
JDHey Kevin,
could you be so kind to share your solution?
Thanks in advance,
Wladimir -
Contact Center Simulator Error
Hello experts,
I am trying to simulate the Contact Center simulator in one of our test systems. When I try to access the simulator using
http://<hostname>:<port>/bcb
The browser is giving the error
Service cannot be reached
What has happened?
URL http://host_name/bdb call was terminated because the corresponding service is not available.
Note
The termination occurred in system XXX with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:HOST_XXX_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
All the services are active only. which service I'm missing to activate? OR am I missing any other settings?
Please advise.
Thanks,
PanduHi,
The Contact Center Simulation runs on the J2EE stack so you need to know your J2EE HTTP port and include that in your URL.
http://<server>:<J2EE Port>/bcb
The J2EE port is different from the HTTP/S port.
Check with your basis team to know you J2EE port.
Regards,
Joost -
Hi Experts,
I want give a demo to the client CIC on IDES. For this I came to know about the Contact center simulator. Can any one help me out to tell the process of installing this simulator or any supporting document or link will be helpful....
When I am checking in google I got one Link by Stephen Johannes but those link are not working......
Regards,
Sap Adherent.
Message was edited by: Sap AdherentHello Sap Adherent,
Stephen Johannes blog is the best source of information on this. I had a look and can see the link for the ICI Overview is broken.
You should be able to access this now at Integrated Communication Interface - Using Java - SAP Library
I hope this helps!
Kind Regards,
James -
Contact Center Simulator (CCS) agent details
hi friends
When i use the Contact Center Simulator (CCS) and click on Agents to see the total number of agents who are logged on and available it displays
"Currently no agents are logged on to CCS".
I dont know where is the problem can any one help me as its a urgent requirement to test the working.
Do i have to assign and channel seperately to agent also if so how plz help us?
Thanks & Regards
PulkitHello Pulikt,
Do the following :
Step 1.) Open up the IC Web client, log into it by using your CRM system user and ensure that the telephony channel is selected. Select Work mode : Ready using the radio button.
Step 2.) Choose refresh on the CCS Agent Over view page.
Hope this helps in solving your problem.
Regards,
Khushboo -
Unable to access contact center simulator
All,
I have done the required conifg steps to set up CCS(Contact Center Simulator). These include:
3.1.2.1 Defining CMS Profile
3.1.2.2 Defining CMS System
3.1.2.3 Defining HTTP Connection (Tested sucsessfull follwoed note 841873)
3.1.2.4 Maintaining CMS Connection
3.1.2.5 Assigning CMS System to CMS Profile
When I try to access the CCS using the following link http://<hostname>:<port>/ccsui/CSSUIStart.jsp
I get the follwoing error
The requested resource /ccsui/CSSUIStart.jsp is not available
Details: File [CSSUIStart.jsp] not found in application root of alias [ccsui] of J2EE application [sap.com/tcbcbici].
Any help on this would be rewarded.
AniHave you tried your SIM in another phone to see if the SIM might be faulty?
Ray. -
Error with the Contact Center Simulator
Hello All,
I am trying to use the Contact Center Simulator (CCS) with the IC WebUI in SAP CRM 7(IDES).
I have done all the settings as per SAP Help and the Blog: How to Configure Contact Center Simulator User Interface (CCSUI)n
When i try to use the CCS i am running into a issue.
This is the sequence of steps -
1 - I start the CCS and then then i login to the IC WebUI and in the CCS i can see the Agent with status "Not Ready".
2 - I change the status in the IC WebUI to "Ready" but the status in the CCS doesnot change to "Ready" and remains "Not Ready"
Tried installing different version of JRE (1.4.xx and 1.3.xx) but no change.
Activated the ICI trace and the error message is see in the ICI is
Http Outgoing Request - Http/1.0 401 Unauthorized
Logon Failed
Call of url http://<servername>:8004/sap/bc/bsp/sam_sess_queue/sam_session_queue_cntrler.do terminated due to error in logon data
Note
Logon performed in system <systemname>.No logon data provided.
I checked SICF and all the required services are activated.
So not sure whats the cause of the error.
Any help/suggestions will be greatly appreciated.
Cheers
SubuHi Subbu,
I have a similar problem , I'm able to view in CCS this message : Currently no agents are logged on to CCS , how do we proceed forward , i logged to WEB UI and the status is Ready but i'm not able to see the same status in CCS..
Appreciate if you can publish your solution in this thread ...
Thanks,
Satish -
ICI BCB Contact Center Integration
Hi,
We are trying to integrate Solidus eCare 5.0 with SAP CRM 2007 for the IC WebClient scenario. We are facing some problems in the test of the connection between the Contact Center and SAP using the Business Communication Broker (BCB) of the Integrated Communication Interface (ICI). All the parametrization has been done in the SAP side. Up this moment the result of the test is "Failed". It looks like we are not sending any parameter in the IciSystem_exchangeProductInformation method, and we should send the ICI version. Could you please help us with this problem?
Thanks very much
SergioHi Amar,
Just follow the steps described in Stephen Johannes weblog located here:
The specified item was not found.
Please note that you need CRM java stack to be installed.
Kind regards and good luck!
Garcia -
Contact Center Simulator & IC WebClient
Hi all
I'd like to use CCS to run some tests with IC WebClient scenario.
What I'm doing is the following:
1) I start WebClient application, log on with an authorized user, choose the proper profile, ensure that telephony channel is selected and Select work mode Ready
2) I start the CCS, verify that my user appears in the Agents Overview page with workmode Ready and than choose Telephony/Simulation. At this point I specify a telephone number (from), select the number that identifies me (to) and press button "Call Agent"
At this point I expected something to happen in the WebClient but it is unchanged.
I followed the Best Practices (building block C78) to set up the scenario in a development system.
Can anyone suggest me what to check ?
Many thanksHi Christian,
First of all, look at the following oss notes: 790596, 787085, and 721008.
They contains interesting hints, but my system was recently upgraded.
The problem I experienced was due to wrong syntax for the caller thelephone number. I found the solution just running many test...
Example:
I have an business partner with phone number 0101020001 set within its master data. I used that number for simulation, but it does not work: you have to add the "+" character, that is, the number of the caller I use now for simulation is +0101020001...and it works !
To be honest I did not care about the phone number, I expected a problem due to missing customizing or a bug somewhere.
Hope this solve your problems
Alessandro -
CUIS Contact Center Reporting Error
I was getting this error on CUIS Reporting tool. I have developed a report using Database Query. My query runs successfully on SQL Server, but its making error in front end. Could anyone have solution on this?
Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpResponse.Redirect(String url, Boolean endResponse) at ViewerLauncher.Page_Load(Object sender, EventArgs e)
Thanks,Hi,
The Contact Center Simulation runs on the J2EE stack so you need to know your J2EE HTTP port and include that in your URL.
http://<server>:<J2EE Port>/bcb
The J2EE port is different from the HTTP/S port.
Check with your basis team to know you J2EE port.
Regards,
Joost -
Hi,
we have new SAP CRM EHP3 abap and CRM Application server Java installation on the same server. We want to use Call center simulator and we are trying to access the BCB on the server at addrees http://<hostname>:<port>/bcb , but we get error: Requested resource does not exist. Do we need to activate something or bcb is not available anymore in latest version of Java application server?
Regards,
Elvis GustinHi,
There has been some change in later version of JAVA server.
Please check the following OSS note :
1957604 - BCB/CCS is not available
Hope this helps.
Sylvain -
Hi All ,
I have created a SR using following sql api
declare
lx_msg_count NUMBER;
lx_msg_data VARCHAR2(2000);
lx_request_id NUMBER;
lx_request_number VARCHAR2(50);
lx_interaction_id NUMBER;
lx_workflow_process_id NUMBER;
lx_msg_index_out NUMBER;
lx_return_status VARCHAR2(1);
l_service_request_rec CS_ServiceRequest_PUB.service_request_rec_type;
l_notes_table CS_SERVICEREQUEST_PUB.notes_table;
l_contacts_tab CS_SERVICEREQUEST_PUB.contacts_table;
begin
-- Populate the SR Record type
l_service_request_rec.request_date := to_date('19-NOV-2013 16:27:34', 'dd-MON-YYYY
HH24:MI:SS');
l_service_request_rec.type_id := 4;
l_service_request_rec.status_id := 1;
l_service_request_rec.urgency_id := 44;
l_service_request_rec.inventory_item_id := 2530;
l_service_request_rec.inventory_org_id := 204;
l_service_request_rec.severity_id := 6;
l_service_request_rec.summary := 'TEST IBIZ';
l_service_request_rec.caller_type := 'ORGANIZATION';
l_service_request_rec.customer_id := 3532;
l_service_request_rec.verify_cp_flag := 'N';
l_service_request_rec.sr_creation_channel := 'PHONE';
l_service_request_rec.resource_type := null;
l_service_request_rec.group_type := null;
l_service_request_rec.owner_id := null;
l_service_request_rec.owner_group_id := null;
l_service_request_rec.bill_to_site_use_id := 1583;
l_service_request_rec.ship_to_site_use_id := 2359;
l_service_request_rec.exp_resolution_date := to_date('19-DEC-2013 16:27:34', 'dd-MON-YYYY
HH24:MI:SS');
l_service_request_rec.install_site_use_id := 178401;
l_service_request_rec.account_id := 3670;
l_service_request_rec.obligation_date := to_date('22-NOV-2013 16:27:34', 'dd-MON-YYYY
HH24:MI:SS');
l_service_request_rec.category_id := 1376;
l_service_request_rec.last_update_channel := 'PHONE';
l_service_request_rec.category_set_id := 27;
l_service_request_rec.incident_occurred_date :=to_date('19-NOV-2013 16:27:34', 'dd-MON-YYYY
HH24:MI:SS');
l_service_request_rec.incident_location_id :=178401;
l_service_request_rec.incident_country :='US';
l_service_request_rec.last_update_program_code :='CSXSRTAB';
l_service_request_rec.creation_program_code :='CSXSRTAB';
l_service_request_rec.bill_to_account_id :=3670;
l_service_request_rec.ship_to_account_id :=3670;
l_service_request_rec.bill_to_party_id :=3532;
l_service_request_rec.ship_to_party_id :=3532;
l_service_request_rec.bill_to_site_id :=2915;
l_service_request_rec.ship_to_site_id :=2915;
l_service_request_rec.incident_location_type :='HZ_PARTY_SITE';
dbms_output.put_line('before calling public sr');
FND_GLOBAL.APPS_INITIALIZE(
user_id => 0,
resp_id => 21739,
resp_appl_id => 514);
cs_servicerequest_pub.Create_ServiceRequest (
p_api_version => 2.0,
p_init_msg_list => FND_API.G_TRUE,
p_commit => FND_API.G_FALSE,
x_return_status => lx_return_status,
x_msg_count => lx_msg_count,
x_msg_data => lx_msg_data,
p_resp_appl_id => 514,
p_resp_id => 21739,
p_user_id => 0,
p_login_id => NULL,
p_request_id => NULL,
p_request_number => NULL,
p_service_request_rec => l_service_request_rec,
p_notes => l_notes_table,
p_contacts => l_contacts_tab,
x_request_id => lx_request_id,
x_request_number => lx_request_number,
x_interaction_id => lx_interaction_id,
x_workflow_process_id => lx_workflow_process_id );
dbms_output.put_line('Return Status : ' || lx_return_status);
dbms_output.put_line('Inserted request id: ' || lx_request_id );
dbms_output.put_line('Inserted request num : ' || lx_request_number );
dbms_output.put_line('Interaction ID : ' || lx_interaction_id );
IF (lx_return_status <> FND_API.G_RET_STS_SUCCESS) then
IF (FND_MSG_PUB.Count_Msg > 1) THEN
--Display all the error messages
FOR j in 1..FND_MSG_PUB.Count_Msg LOOP
FND_MSG_PUB.Get(
p_msg_index => j,
p_encoded => 'F',
p_data => lx_msg_data,
p_msg_index_out => lx_msg_index_out);
DBMS_OUTPUT.PUT_LINE(lx_msg_data);
END LOOP;
ELSE
--Only one error
FND_MSG_PUB.Get(
p_msg_index => 1,
p_encoded => 'F',
p_data => lx_msg_data,
p_msg_index_out => lx_msg_index_out);
DBMS_OUTPUT.PUT_LINE(lx_msg_data);
DBMS_OUTPUT.PUT_LINE(lx_msg_index_out);
END IF;
END IF;
exception
when others then dbms_output.put_line('in others main ' || sqlerrm);
commit;
end;
I am able to create SR using above code but when i try to search using the SR number it say no LOV is found from Contact Center . Please
help me out.
Thanks
MarkHi Mark,
Have you tried setting p_commit to FND_API.G_TRUE?
HTH, Ryan. -
Direct CTI Integration with Oracle Contact Center Form
Hi,
We are on 11.5.10.2 and we are trying to implement the "Direct CTI Integration" solution that Oracle suggested to enable Screen Pop in contact center form based on data coming from a third party CTI. In our case we are using Genesys TServers for CTI.
In this document (The equivalent R12 document is on metalink titled DIRECT CTI Integration - Oracle EBS Contact Center & Third Party CTI [ID 734902.1]), Oracle solution involves little to no coding from the Oracle Apps side other than a few profile setups. We are not able to get started on this because we did not find some of the profile options. And the forms did not have the changes that Oracle said it should have. Obviously, we need to apply some patches but not sure which one.
I am wondering if there are any users and customer who have implemented a similar solution that can help us get started.
Thanks.
Regards,
VenkatIt has been a while since we did a test of the Direct CTI integration at my company. We are on a 12 release so the patches are included, unfortunately I can't help there.
Word from the Wise: Be Prepared....
The only development on the Oracle side that was necessary was the configuration of the profile settings. You select a port in the settings which will then instantiate an http listener on the user's thin client.
The development on the CTI side is intensive....you must code an http listener on your client CTI to enable two way communication between the Oracle thin client and your 3rd party CTI client (most likely residing on the desktop of the user PC, in my case, Cisco CTIOS).
Unless Oracle has since changed their model, you cannot just send a blind screen pop to the Oracle client due to the required 2 way communication. There are a lot of request/response's involved (registers, readys, etc). While it is absolutely necessary for an HTTP listener to exist on the Oracle side, I believe that it is unnecessary to have the level of communication required from the 3rd party CTI. The CTI needs the call control, I just don't believe that Oracle needs to know about it.
If I have incorrectly interpreted or understood the model/options, I hope someone can correct me.
Thanks,
Derek -
CAD from Contact center into SAP CRM
Hi All,
I am no SAP expert, but the following is what we are trying to achieve:
-A call comes into a contact center application
-Via an integration this call is send to a SAP ICI webinterface and ends up at the agent logged on to that SAP session.
Now we have an awkward situation that the original number coming from the PBX is rather misformed +00031123456789. What we are expecting is +31123456789. The number coming from the PBX can be changed, but that is going to have consequences for all other people that are not connected to SAP, so doing this is not an option.
What I have been reading about is that it is possible to get CAD (Call Attached Data) to be send into the SAP ICI environment.
The contact center application is delivering the data in the following XML format:
What I am interested in is to map all these fields into such a way that I can use them in the SAP ICI interface.
I have been reading Link:[; and in there it is mentioned that there needs to be a mapping between these fields and an XSLT and ABAP. And a reference to a book.
Is there anybody that can help me with this? Or give me some other advice that could help me out in this case. I would very much appreciate it.
Thank you all very much for your input.
Best regards,
CornéHello Corné,
I'm guessing the reference was to my book, "Maximizing Your SAP CRM Interaction Center" from SAP Press, where on page 396 I offer a paragraph on how to identify a call via CAD rather than ANI.
Here's the excerpt:
How to Identify Account via Call Attached Data (CAD)
Is the Interaction Center able to identify a customer via account number contained in call attached data (CAD) rather the via automatic number identification (ANI) service?
Yes, it is possible to identify a customer by extracting the customeru2019s account ID from the call attached data (CAD). This can be configured in the IMG activity Define Account Identification Profiles (transaction CRMC_IC_BPPROF) in the fields under Contact-Attached Data Extraction. In the CAD Application ID field, enter the value that appears in the application ID tag that appears in the XML code of the Interactive Voice Response (IVR) system that collects the customeru2019s account number (e.g., u201CGenesys-CADu201D). In the XSLT file field, enter the name of the XSLT program that is responsible for extracting the account ID from the contact attached data. You are responsible for creating this XSLT file. However, SAP delivers a sample XSLT file that you can reference, named CRM_IC_BPIDENT_EXT_IAD_TO_ABAP. SAP also provides a sample program showing how to extract CAD data from, for example, Genesys named CRM_IC_BPIDENT_EXT_IAD_GENESYS. See SAP note 707104 for additional information.
Best regards,
John
Maybe you are looking for
-
Help in Applescript Mail option
Hi Forum, I'm using tis applescript, to check the folder for files and sent mail via applescript. It works quiet good. The problem is if the document does not contain any files, also the mail is sent to the receipient. I'm requesting forum , to corre
-
Hi, We configured the Out of Band component, but are using Intel SCS RCS to provision AMT devices remotely. The remote configuration process with Intel SCS works fine; we are able to connect to the AMT web UI and we can use a free KVM tool to manage
-
Cover flow is very slow and crashes on iOS 5 or is it just my iPod Touch?
Basically, everytime I use cover flow on my music and scroll around it laggs and crashes. The simple solution is to not use it I know but I'm just wondering if you guys are having the same problem.
-
Views not available in Discoverer Plus
Hi Gurus, I have created some views using Oracle 10 g Disco Admin v 9.0.4 and I am able to access them from Disco Desktop v 9.0.4 However, when I log in to Discoverer Plus, those views are not available. I am logging with the same user id that I am u
-
Display or array values all on one line
This is my code it gives a strange out come!!!, how do I display the values of the array? System.out.println("hi " + array2[0] + array2[1] + array2[2] + array2[3] + array2[4]);