Bcc field not displayed in sent messages

I've seen the posts regarding this and tried adding the bcc field to the headers display but it still isn't appearing on the messages in my sent folder.
I know that the bcc addresses are in fact being sent because I got a reply from one of them today. Yes, when I choose view/message/headers or view/message/raw source, only the contents of to: or cc: field appear. I also tried this with some test messages to my own addresses.
One caveat here is the account I am sending here is an exchange account.
Any ideas?

Alan,
This info is available in at least two ways.
1) open the message in the Sent mailbox, click on View in the menubar, place the cursor on Message, and choose Long Headers, or
2) use Mail Preferences/Viewing to choose to use Custom header view, and choose to include the Bcc header, with all messages where it is available.
Ernie

Similar Messages

  • BCC field not appearing in Sent email

    When I send an email with a BCC entry, the BCC field disappears when that email is shown in the Sent folder so I have no permanent record of who is BCC'd on that email. I cannot find a way round this.
    It's only the recipients I want to keep in the dark, not me! Is there some way of requiring Mail to display the BCC field?

    Alan,
    This info is available in at least two ways.
    1) open the message in the Sent mailbox, click on View in the menubar, place the cursor on Message, and choose Long Headers, or
    2) use Mail Preferences/Viewing to choose to use Custom header view, and choose to include the Bcc header, with all messages where it is available.
    Ernie

  • I am logged in to iMessage on both my mac and iphone but my mac will not display my sent messages or received. the only thing displayed is that the person i am talking to is typing but then i receive the message on my phone rather than computer.

    The only thing that is displayed is the typing (...). messages i send do not even show up on my computer.

    Hi,
    In Messages Menu > Preferences > Accounts > Messages account check the iPhone Number is showing Up as both a "Receive" Alias and is in the "Send From" Drop down.
    Next check the iPhone is listing the iPhone Number as a possible Send and Receive option. (I have seen the number become unticked even though the option is greyed out)
    If possible make the Send option on both the same ID or iPhone number.
    If this has not improved things do the following.
    On the iPhone > Settings > Messages remove the Apple ID.
    Then place the iPhone in Airplane Mode for 5 minutes to "break" with the server.
    On waking the iPhone add the Apple ID back to the Messages settings.
    If the Mac version has not had a pop up to say the iPhone is using the iPhone Number and the Apple ID then restart Messages on the Mac.
    9:43 PM      Thursday; April 11, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How to not display the error message ?

    hi everybody,
    I would like to know if it is possible to not display the error message in BO XI R2 when I try to refresh my reports ?
    (like "the query bla bla does not fetch any data...")
    Thanks for your help,
    Mario

    I've found this method to not display this error message but  the problem is that the prompt message when you refresh the report are not displayed:
    Has someone an idea ?
    Private Sub Document_BeforeRefresh(Cancel As Boolean)
    Application.Interactive = False
    End Sub
    Private Sub Document_AfterRefresh()
    Application.Interactive = True
    End Sub
    Edited by: Pascolo Mario on Oct 22, 2008 4:35 PM

  • Master-detail: detail field not displayed after changed by master field

    I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
    In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
    How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

    Wouter,
    I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
    So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
    Steven Davelaar,
    JHeadstart team

  • BCC'd recipents appear in sent message

    When I BCC emails to a group, the BCC'd recipients are visible to all recipents of the message. How can I stop this from happening? I want the BCC'd address to remain hidden. Any ideas would be great.

    To really insure that no one at all sees any of your contacts in your group, build your contacts for your group within the "Group" portion of "Address Book."
    Name that group with a name that will not reveal any of your contacts.
    Then Drag that "Group" to the "Bcc" field within your email composing window.
    Then, follow Mr. Mulders info of making sure that the check box in front of "When sending to a group, show all member addresses" is UNCHECKED!
    This works, I have used it before!
    Here is a poem I created just for this purpose:
    RESPECT
    A PF ORIGINAL
    Your e-mail addresses that you hold so dear,
    protect, admire and endear;
    to keep away from those who would harm,
    use wrongfully or put down
    in their annals of long, long lists,
    so someone in secret can capture
    and pass it around
    to places that would make your eyes roll.
    Soon appear oddities you wonder from where,
    you often wish they would all disappear.
    Were you asked permission for your address to appear
    publicly on a list for all to see;
    You know not so, but how could it be,
    that yours was picked for the world to see.
    Maybe all would be calm if this is done,
    hide the address and lock it so strong
    that no other can see or find - - -
    that is where it belongs.
    Take heed, learn and read; all will
    appreciate your care of what is theirs.
    Pass this around to those who would be so thoughtful!
    Another PF Original
    Copyright 2005
    iMac 1.9 GHz PowerPC G5 1.5 GB DDR2 SDRAM   Mac OS X (10.4.6)   Slot Loading 8X Dual Layer SuperDrive, iSight & Apple Remote; iPod Video

  • Mail BCC field not working?!?!

    This is really weird behaviour...
    When I send a mail to several recipients, all of them in the BCC field (no one in the TO or CC), it turns out all my receipients have access to the full receipient list!!!
    I sent a, hmmm... well... "sensitive" mail the other day to 6 contacts, all in BCC field, and one of them "Replied to All" and everyone else (from my original BCC list) got his reply.
    Is this right? I thought the function of the BCC field was, well, HIDE the distribuition list from all the receipients, but if hitting REPLY ALL reveals the list, there's not really much point in BCC, right?
    Does this happen to everybody? Is this normal behaviour?
    How do I deal with this?
    TIA.

    RAM,
    This is normal behavior when using some (but not all) SMTPs. Without any address in the To field, the Outgoing Server (SMTP) makes this change, and NOT Mail. Put your own name in the To field if there is not another logical address to allow to be visible.
    Ernie

  • KOMK Fields not displaying values in sales order.

    Hi all,
    I have created an additional tab for VA01,02 and 03. I have added fields from VBAP table and KOMK structure.
    Now fields added from KOMK structure are displaying empty fields(no value). The fields areVAT REG NO (KOMK-stceg) and Tax Code (KONP-MWSK1).
    i have added fields with same name, so i have not coded anything. Do i need to code something for these fields?
    Please suggest the possible solution.
    Thanks in advance for your suggestions.
    Regards,
    NarsiReddy cheruku.

    Hi Edgar Soares,
    Thanks for your reply,
    Yes you are right, i am using BADI_SLS_ITEM_SCR_CUS.
    now i have added KNA1-STCEG to screen and in PBO module i coded as follows.
    (In top include i declared Tables kna1 and Tables VBAK.)
    data vat type kna1-stceg.
    data wa type kna1.
    SELECT SINGLE * from kna1 INTO wa.
    vat = wa-stceg.
    But it is not displaying Vat reg num on screen only displaying empty field.
    Please suggest where i went wrong.
    Thanks & Regards,
    NarsiReddy Cheruku.

  • Custom fields not display in SRM5.5 Basic Data Frame

    Hello Everybody,
          I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
         No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
        I added these fields by help of 672960 OSS notes..
       Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
      Is there anything else do i need to display custom fields in basic data frame??
    I have one more question..
      When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
      I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
      To display all the fields which are display in GUI Mode also should display in URL..
      To bring this functionality , What do i need to do?
      I appreciate if you answer these questions..
    Thanks,
    John.

    Hi Disha,
    We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF".  We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
    Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
    Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
    I will be gald to provide any kind of info.
    Thanks in advance...

  • Maintenance View - Fields not Displaying

    Hi experts,
    I created a Maintenance View for a table. But when i go and see in the Maintenance View Overview, the integer field-columns in the table are not displayed in the view.
    can u ppl suggest me why this happens? whether maintenance view will not support integer fields ? And how to over come this problem.
    with regards ,
    James...
    Valuable answers will be rewarded...

    the problem might be you used two screens while creating table maintaince.
    so use one screen in table maintaince then you will get everything.
    even now you will get all fields ,just double click on one column,it will give detailed,there you can see the all the fields.
    Thanks
    Seshu

  • "File Path and Name" field not displaying correctly

    Post Author: DaveWoo
    CA Forum: General
    Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

    This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
    Ludek

  • Sent messages do not show in "sent messages" on slow connections

    I am temporarily on a very slow internet connection. It sometimes takes several tries to sent an email over the connection provided by the hospital I am currently in. Frequently sending times out and I have to restart the try.
    Some of the emails sent do not show up under sent messages, so I do not have any carbon copy on my side, which is sometimes dangereous as there are some company mails.
    Mail is using an IMAP account at Hosteurope, so the question is - is there a timeout proble with IMAP resulting in emails not copied to the sent messages box after retried sends?

    dont have access to slow line any longer, so cannot work on a solution

  • Some sent mails do not appear/are not saved in "sent messages" and are lost

    i work with mail and 4 different imap accounts. about every 15th sent email "gets lost". i.e. i can follow the sending process in the activity window, and i hear the sending confirmation tone. and, usually, the mails even reach the receiver. BUT, the mails do not appear/are not saved in the "sent messages" folder and are lost. this is very unsettling, as there seems to be no recognizable pattern. can anyone help, or should i change to "entourage"? big thanks for replies
    Message was edited by: Bassolino

    Hi Bassolino and David,
    I, too, have had this intermittent issue and wonder if you had found a solution?
    In the past 3 weeks, two messages have been sent from my mac mail account, using the mail application (the only apparent common factor being that both messages had iphoto attachments), the recipients have received them - only I do not have a copy in my 'sent' folder.
    They are not stored on the macintosh server either...
    I have not altered any settings and this intermittent issue has just emerged.
    Any help from 'Top Users' would be welcome. Thanks.

  • Message not saved in sent messages folder

    Hi everybody,
    When I send a mail by the Collaboration Launch Pad and check the option: "Save copy in Sent Messages Folder" I get this error:
    "Message has been sent, but could not be saved in the sent messages folder; check the mail server entry in your user mapping data."
    Please is anybody there who can help me to properly configurate that option or tell me how to remove it from the body?
    Thanks in advance,
    Antonio

    Hi Antonio,
    Saving the mesage means writing that e-mail in the senders "sent item" folder in the mailbox. Thus make sure that the users mail server name and user and password is correct for the system Exchange.
    Also check SAP Note 738965.
    Also there is this this specific port that should be open on the SMTP server for the mail to be saved  in the "sent items" folder. I dont remember what port is it. Will try to figure out and let you know.
    Also make sure that your Exchange transport has the sent items folder name.
    Akhilesh
    Using telnet check that the SMTP server can be reached on port 25. If not then there is no way you can save the messages in the sent items folder using the collaboration tools.
    Message was edited by: Akhilesh Mahto

  • If I do NOT store my sent messages on IMAP server, where are they?

    My hosting service warned me that I am taking up too much space with my Sent messages being stored on the IMAP server.  If I uncheck the box to store Sent messages on the server in my account preferences, then where do I find my sent messages?  All of the folders listed alongside the sidebar seem to be linked directly to the IMAP account.  I can't find my sent messages anymore.
    They aren't gone though.  If I check the box again, the messages show up again.  So my question is how do I not store them on the server but still store and be able to see them on my computer?
    Thanks
    Bob

    That is a solution if I want to do a one-time move of my sent messages to another folder and then leave things as-is.  But once I stop storing the sent messages on the server, how do I access new sent messages after that?  The folder is not visible anywhere, from what I can tell.

Maybe you are looking for