BCP Microsoft Platform integration with Solution Manager

Hi
Is it possible to integrate BPC Microsoft platform 7.0 and 7.5 with Solution Manager?
If so how? Is there documentation available explaining the process?

Hi Johan,
There is some level of integration available with Solution Manager. To set up your system for Diagnostics, refer to "End-to-End Root Cause Analysis System Landscape Setup Guide", which is available on Service Marketplace at [https://service.sap.com/sapidb/011000358700000074392009E|https://service.sap.com/sapidb/011000358700000074392009E], and follow the chapters that apply to Planning and Consolidation.
You can also access this document by going to [http://service.sap.com/diagnostics|http://service.sap.com/diagnostics] and selecting the Media Library link under the "More Documentation" section. The document is labeled "SAP Solution Manager Landscape Setup Guide".
Thanks.

Similar Messages

SAP CPS Redwood integration with Solution Manager 7.1 SP8

Hi experts,
I need your help..!!
We are planning to integrate SAP CPS Redwood with Solution Manager 7.1 SP8, I have no idea about it, Can you please provide me a step-by-step document, to complete this task?
Regards
Zohaib

hi,
dont have any explicit step by step doc for CPS integration
but refer the source here http://www.sdn.sap.com/irj/sdn/nw-scheduling?rid=/library/uuid/c04021b0-5a4e-2a10-b3a0-eb8f0c799736
some more on SAP Central Process Scheduling by Redwood (CPS)
Thanks
Jansi

Help Needed: HP QTP/UFT integration with Solution Manager

Hi Experts,
We are trying to make HP UFT 12.00 work with Solution Manager 7.1 for enabling automated testing for our client. We have successfully linked HP UFT and Solution Manager and were able to record and execute a test script created in HP UFT with no problem.
Unfortunately, when we tried creating a new test script in HP UFT and tried saving it so that it is stored in Solution Manager, we get the following error. We have reviewed the integration procedures and authorization objects needed and it seems nothing was missed.
Anybody familiar with the said error or any suggestions where to look will be appreciated. Thanks in advance.
Detailed steps for replicating the issue:
Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
2.     Open Unified Functional Testing (UFT) 12.00
3.     Click File -> New -> Test
4.     Type even a dummy script in the Action window
5.     Save Test Script by clicking File -> Save <test name> As…
6.     Fill out dialogue box with Test name and Test version then click Ok. Note: I used Z* name
7.     Error Message appears
Note:
One observation is that, error message only appears when trying to save a Test that is not currently in Solution Manager. If I try saving the dummy test from above as “Z_CREATE_SALES_ORDER_02” (exists in Solution Manager),
I am asked if I want to overwrite existing test in Solution Manager.

Hi,
I have configured the solman in accordance with UFT12.0 but still un-able to make conenction to the solution manager.
Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
Error:
Message
SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=<IP>, GWSERV=sapgw02, SYSNR=02
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner <IP>:3300' not reached
TIME        Tue Jan 19 12:02:17 201
RELEASE     710
COMPONENT   NI (network interface)
VERSION     39
RC          -10
MODULE      nixxi.cpp
LINE        3286
DETAIL      NiPConnect2: 192.12.353.12:3302
SYSTEM CALL connect
ERRNO       10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER     1
Could you please guide?
Regards,
Raichand

ECATT integration with solution Manager

Hello Colleagues,
Please let me know if any of you have worked on integration between Solution Manager and eCATT.
I have the scripts in eCATT system now i need to run these scripts from Solution Manager system in the target system.
Any info would be of great help.
Thanks,
Ajay

Hello Ajay,
Have you seen these links?
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/7e/8186fa137998448de956476b8cecdc/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/de/50e848f5f311d5997000508b6b8b11/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/48/e151fddb163184e10000000a421937/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/59/f49e6fe97711d5995d00508b5d5211/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/cb/cb3a3e5069eb6ce10000000a114084/frameset.htm
These links are from the Solution Manager Help Library, so the information is specific to Solution Manager for eCATT
Regards,
Paul

MDM Integration with Solution Manager

Hi Gurus,
Can any one explain me the process to Integrate MDM 7.1 with Solution Manager?
Thanks,
Anil

Hi Anil,
documentation is generally available on [Service Market Place|http://service.sap.com/installmdm71]. You might find the How-to Guide Configure the MDM Administration Cockpit helpful.
Best regards
Michael

BMC Control M integration with Solution Manager

Hi
I have some question:
Is it possible to integrate BMC Control M with Solution manager?
Is SAP have plugin or we need to develop?
If we integrate then what is the benefit?
Please guide me.
Thanks
Dee

As Matues has provided that BCM Control-M is a supported job scheduling tool
Further to answer your question SAP Note 499040 explains that XBP interface is required for external job scheduling tools
You will find several documents that describe the XBP interface in detail at
http://www.sdn.sap.com/irj/sdn/nw-scheduling.
So you will need to use this interface to use the external job scheduling tool
Regards,
Paul

Peoplesoft integration with solution manager

Hi Experts,
I would like to know whether peoplesoft can be integrated with SAP solution manager and whether other third party applications can be integrated with Solman... it can be helpdesk, monitoring or any other scenario... Please pass on any information that you might have

I'm also interested in this topic because we want to integrate incidents and changes reported by the solution manager in a Peoplesoft S3 helpdesk.

Integration with solution manager 4.0 - service desk with XI ?

Hello Experts,
Does any one know how to integrate the solution manager 4.0 - service desk with SAP XI. I read the solution manager 4.0 service desk web service api, but it only has the XSDs. If any one can provide me any step by step procedure for creating the webservice through this api and publishing it....WILL DEFINETLY BE REWARDED.
Thanks,
Raju.

Hello,
I have the same task.
At SolMan side I made:
- released the web service
- Create logical port
- Create HTTP connecto to 3th party ServiceDesk
But I don't understand the "Configure Interface to Solution Manager Service Desk" step.
What was Your problem?
Regards,
Gusztá

Code Inspector integration with Solution Manager

Hi All,
I would like to integrate the Code Inspector into Solution Manager, so that changes in managed systems can be checked prior to passing to test. I wonder if any of you is aware of such a solution, or have already implemented such functionality
Thanks iin advance,
Best regards,
Ádá

Hi
please check the blog
[/people/christian.drumm/blog/2009/12/30/continuous-integration-using-code-inspector|/people/christian.drumm/blog/2009/12/30/continuous-integration-using-code-inspector]
and the discussion on the treads,
[Is it possible to integrate the Code Inspector in Transport Management|Is it possible to integrate the Code Inspector in Transport Management]
might be this helps
Thanks,
Jansi

SAP Best Practice Integrated with Solution manager

We have a server in which we installed SAP Best practice baseline package and we have the solution manager 7.01 SP 25
We maintained the logical port but when we try to check connectivity to solution manager we got the following error:
Connectivity check to sap solution manager system not successful
Message no. /SMB/BB_INSTALLER375
Can anyone guide us how to solve the problem and also if there is another way to upload the solution defined on the best practice solution builder into sap solution manager as a template project
Thanks,
Heba Hesham

Hi,
Patches for SAPGUI 7.10 can be found at the following location:
http://service.sap.com/patches
-> Entry by Application Group -> SAP Frontend Components
-> SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.10 CORE
-> SAP GUI FOR WINDOWS 7.10 CORE -> Win 32
-> gui710_2-10002995.exe

NWBC integration with Solution Manager (Workcenters)

Hi,
We want to integrate NWBC with the SolMan workcenters to give an "easy" acess to SolMan to our managers.
We found the service "/default_host/sap/bc/solman/nwbc/" in SICF so the integration should be possible but it doesn't work, I guess that some customizing must be done.
Is there any documentation, guideline etc. about how to make this configuration?
Thanks in advance,
Jon

Hi,
Thanks so much for the info. We followed the configuration steps from the "Solman 7.0 Ehp1 configuration guide" and we were able to configure NWBC 1.0 with our SolMan. We didn't find any configuration guide for NWBC 3.0. Is it possible to configure NWBC 3.0 with SolMan?
As already explained, now we are able to access with the NWBC 1.0 to SolMan workcenters. However, when we try to open any Abap transaction we get the following error "Scripting is disabled by the server". We set parameter "sapgui/user_scripting" to "TRUE" and now we don't get the mentioned error but it starts loading the Abap transaction and it never ends. Is there anything more to be done?
Thanks again!
Jon

Cannot run HP QTP 11 in integrated mode with Solution Manager 7.1

Hi,
I have setup qtp to work with solution manager 7.1. QTP works in standalone mode with no issues. as soon as I try and use it in integrated, i.e. launch qtp from solution manager, the message "failed to start external test tools quicktest professional" displays. When I click the back button the message "error during method call in OLE API" displays.
Using qtp in integrated mode worked previously on the solution manager 7.1 system. Since the solution manager 7.1 system was moved to a new datacenter it stopped working. I am not sure if this could have had an impact.
I have tested qtp with several different solution manager boxes and it works perfectly in integrated mode. please advise what server side settings i need to consider to solve the issue.
Sincerely,
David
Edited by: David Snyman on Mar 2, 2012 7:38 AM

Hi Sida,
Can you check SapLogon.ini file maintaining below location please.
let me know it resolve the isse, can you forward your details to <email removed by moderator>
looking forward your response.
Regards
Naveen
File Location
Use
C:\Windows\saplogon.ini
Enable QTP to identify the Solution
Manager Server
C:\Users\nav\AppData\Roaming\SAP\Common\saplogon.ini
Auto log on to SAP Systems for testing
C:\SAP\FrontEnd\SAPgui\saplogon.ini
Set Record and Run settings in QTP for
64 Bit OS
C:\Program Files
(x86)\SAP\FrontEnd\SAPgui\saplogon.ini
Set Record and Run settings in QTP for
32 Bit OS
Message was edited by: Manish Kumar

Integrating EP 6.0 with Solution Manager 3.2 .

Can anyone please help me regarding the steps for integrating EP 6.0 with solution Manager 3.2.
It would be nice if any one would direct me to any link or any presentation where in the steps for the above subject are illustrated.
Regards,
Ashish .A. Poojary

Ashish,
What is your requirement?
Could you be more specific about the area your exploring
Solution manager is huge...
Please assign pts if it helps

Are you utlizing SAP's Quality Center with Integration to Solution Manager?

Hello,
I am interested in hearing from folks who are utilizing SAP's Quality Center with or without Integration to Solution Manager. Please post your experience on setting this up and realizing the benefits, i.e. efforts involved, what features of HPQC you are using, is it a good tool to use for integrated SAP testing etc.
Thanks in advance for your help!
Abu

Hi
I luv solman so if u ask me i can do all with solman itself and say not to go with Quality center
but again it is upto project requirement
it is very easy to build the automated scripts in QTP etc used with Quality center but again bit more complicated in ECATT
its upto the ur decision but if u r gng with manual test case management forgot quality center and go with Solman
So far i have done 5 Test Management implementation including both type of test casees automatic and manual and all are managed with solman
moreover if u get service desk configured in place then its integrated with solman test management whic helps u a lot.....
one step ahead go for Change management.
Hope it ans ur query
Regards
Prakhar
Edited by: Prakhar Saxena on Jun 9, 2010 12:06 AM

System Monitoring with Solution Manager Ehp1

Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.

Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
               with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
          with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key:   10 Pool
            Size configured.....:   642000000 ( 612.3 MB)
            Size min. estimated.:   637597428 ( 608.1 MB)
            Advised Size........:   640000000 ( 610.4 MB)
Key:   40 Pool for database buffers
            Size configured.....: 1048000000 ( 999.4 MB)
            Size min. estimated.: 1468229308 (1400.2 MB)
            Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key:        1 Size:        2500 (   0.0 MB) System administration
Key:        4 Size:      523648 (   0.5 MB) statistic area
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:    67108964 ( 64.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       11 Size:      500000 (   0.5 MB) Factory calender buffer
Key:       12 Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
Key:       13 Size:   200500000 ( 191.2 MB) Alert Area
Key:       16 Size:       22400 (   0.0 MB) Semaphore activity monitoring
Key:       17 Size:     2672386 (   2.5 MB) Roll administration
Key:       30 Size:       37888 (   0.0 MB) Taskhandler runtime admin.
Key:       31 Size:     4806000 (   4.6 MB) Dispatcher request queue
Key:       33 Size:    39936000 ( 38.1 MB) Table buffer, part.buffering
Key:       34 Size:    20480000 ( 19.5 MB) Enqueue table
Key:       51 Size:     3200000 (   3.1 MB) Extended memory admin.
Key:       52 Size:       40000 (   0.0 MB) Message Server buffer
Key:       54 Size:    20488192 ( 19.5 MB) Export/Import buffer
Key:       55 Size:        8192 (   0.0 MB) Spool local printer+joblist
Key:       57 Size:     1048576 (   1.0 MB) Profilparameter in shared mem
Key:       58 Size:        4096 (   0.0 MB) Enqueue ID for reset
Key:       62 Size:    85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key:        2 Size:    31168040 ( 29.7 MB) Disp. administration tables
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key:       14 Size:    28600000 ( 27.3 MB) Presentation buffer
Key:       19 Size:    90000000 ( 85.8 MB) Table-buffer
Key:       42 Size:    13920992 ( 13.3 MB) DB TTAB buffer
Key:       43 Size:    43422392 ( 41.4 MB) DB FTAB buffer
Key:       44 Size:     8606392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     6558392 (   6.3 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    13313024 ( 12.7 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:       18 Size:     1792100 (   1.7 MB) Paging adminitration
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900130 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....:         73
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB,   99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool:   34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................:    1
Warnings detected................:    9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
      compiled at   Jun 28 2010
      systemid      324 (IBM RS/6000 with AIX)
      relno         6400
      patch text    patch collection 2010/1, OSS note 1304480
      patchno       335
INFO Runtime:
      running on    saptqa01 AIX 3 5 00069A8FD600
      running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
      alert/MONI_SEGM_SIZE = 200000000
      alert/TRACE          = 1
      SAPSYSTEM            = 30
      SAPSYSTEMNAME        = TQA
      SAPLOCALHOST         = saptqa01
      DIR_CCMS             = /usr/sap/ccms
      DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
      DIR_PERF             = /usr/sap/tmp
INFO:
      pid           4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
        segment status     ENABLED
        segment started at Tue Sep 14 09:35:56 2010
        segment version    20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
       Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
       Please change configuration with profile parameters
           ipc/shm_psize_01 = -<different pool nr>
       xor
           ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1

BCP Microsoft Platform integration with Solution Manager

Similar Messages

Maybe you are looking for