BCS - How to check unit consolidation percentage ?

Dear Gurus,
how can I check in BCS system which is the percentage of apportionment between units ?
I need a list of units with their reciprocal apportionment. Do you know a table or maybe can I check it through customizing ?
Thanks in advance!
Antonio

The documention (below) suggests using statistical accounts for storing the porportions. Although your items may be different, I suggest you execute a report on thes to get the required information.
81110000: This itemu2019s value is always 100%. However, you record this value only for consolidation units that are proportionately consolidated. The actual proportion is derived from the sum of items 81110000 through 81160000. (This sum is used in queries.)
81120000: YTD value of the item = proportion of the prior period u2013 1 (for example, 0.75 u2013 1 = u20130.25 = u201325%)
81130000: YTD value of the item = proportion increase at the beginning of the current period
81140000: YTD value of the item = proportion increase at the end of the current period
81150000: YTD value of the item = proportion decrease at the beginning of the current period
81160000: YTD value of the item = proportion decrease at the end of the current period

Similar Messages

  • How to check Financial Consolidation SP Level

    Dear Experts,
    How can i check which SP version Financial Consolidation 7.5 installed on Windows server 2008,
    From financial consolidation desktop Help Menu > About Financial Consolidation it seems ;
    Version : 7.5 Build : 7.5.0.2348
    Best Regards

    Hello Mariam,
    Sorry but "Control Panel\Programs and Features" has no information about FC version. Just installed products listed on control panel,
    Control Panel\Programs and Features  listed as instaled products ;
    SAP BusinessObjects Financial Consolidation
    SAP BusinessObjects User Management System
    SAP BusinessObjects Financial Information Management Server
    Best Regards

  • How to check the spool info

    Hello
    kindly let me know how can i check how much portion of the spool is currently occupies (So that when its getting filled , we will be able to manually delete the spool)
    - How to check the free percentage and configured amount of spool
    regards

    HI,
    How is that?
    How to check the SPOOL capacity
    Seems to be duplicate!!!
    Regards,

  • How to check whether 620 routine is configured or not?

    Hi,
    I hv VOFM>Formulas>Conditional value--> 620 routine, its used to determine the SHIPMENT COST DOCUMENT creation and its talks about consolidating all the shipemts together belongs to same customer and there by creating only one shipment (cartons/volume/weight) cost document. (Its developed and done activated)
    So, pls let me know that, How to check that whether this VOFM routine 620 is in place (configured) or not in the system?
    I tried from SPRO/IMG, but, no use!!
    Thank you

    This should be in SPRO. See the link at the bottom of this [sap library topic|http://help.sap.com/saphelp_erp60/helpdata/en/93/7440d3546011d1a7020000e829fd11/frameset.htm]

  • Sap isu-cic(how to check the output)

    HI to all......
    In isu-cic  how to check the output,i have done all the assign ments like framewrk creation etc...i defined the organizational structure with assign hoder...after that wats the next steps?
    can anybody plz reply....
    Cheers..
    sateesh

    Hello satish
    Step 1:
    Create Framework Id( assign hidden & visible components)
    Step 2: Create CIC profile
    Step 3: create Org unit and assign person
    Step 4: Assign CIC profile to Org. unit (or) person
    Path : Easy access screen
              Logistics>Customer service>Customer Interaction center>Adminstration>CIC structure>Org.Structure(Change,T.code-PPOMW)>select Org. unit
    In this screen on the top i.e menu bar find Go To
    Go To>detail Object>Enchanced object description
    Now u r in Maintain object page(T code-PP01)
    Now in the Active tab page select CIC profile
    Now in menu bar Edit>create infotype
    Again u r in new page(T code-PP01)
    Enter the CIC profile Id which u have created in customizing
    Run T code- CIC0
    I hope u r able to see the screen now
    Rgds
    Madhusudhan

  • How much storage units can be added in the single bin.

    Hi all,
    Can anybody tell me how much storage units can be added in the single bin.
    Dev

    Hi Dev,
    AS Prashant & Abhijit mentioned above the maximum storage units in a single bin is based on various factors such the putaway strategy & capacity check you have set for your storage type as well as palletization data.
    Now in case of Bulk Storage which you have mentioned above, please go through the below F1 help for the block structure.
    In bulk storage, you need to define for each block (or row) how many
    storage units fit into the block.  For this purpose, you must define
    both the number of columns as well as the maximum stack height.  *The*
    product of these factors usually gives the maximum number of storage
    +units and is determined automatically by the system.  However, it is+
    possible to change the maximum number of storage units to a lower number
    if the storage bin or the material features require this.                                                                               
    Hope it helps.
    Thanks & Regards,

  • How to check Internet usage userwise in Active Directory ?

    How to check Internet usage userwise in Active Directory ? Without third party software is it possible ?
    Thanks & Regards, Amol . Amol Dhaygude

    Hi,
    Thanks for your comment. 
    The schema is the Active Directory component that defines all the objects and attributes that the directory service uses to store data. 
    Active Directory stores and retrieves information from a wide variety of applications and services. So that it can store and replicate data from a potentially infinite variety of sources, Active Directory standardizes how data is stored in the directory. By
    standardizing how data is stored, the directory service can retrieve, update, and replicate data while ensuring that the integrity of the data is maintained. 
    The directory service uses objects as units of storage. All objects are defined in the schema. Each time that the directory handles data, the directory queries the schema for an appropriate object definition. Based on the object definition in the schema, the
    directory creates the object and stores the data. 
    Object definitions control the types of data that the objects can store, as well as the syntax of the data. Using this information, the schema ensures that all objects conform to their standard definitions. As a result, Active Directory can store, retrieve,
    and validate the data that it manages, regardless of the application that is the original source of the data. Only data that has an existing object definition in the schema can be stored in the directory. If a new type of data needs to be stored, a new object
    definition for the data must first be created in the schema. 
    You can find more information from below article.
    Active Directory Schema Technical Reference
    http://technet.microsoft.com/en-us/library/cc759402(v=ws.10).aspx
    What's New in Active Directory Domain Services (AD DS)
    http://technet.microsoft.com/en-in/library/hh831477.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • How to check syntax errors in ABAP Queries

    HI Guys,
    How to check syntax errors in ABAP queries, Can please provide the T-Codes.
    Advande thanks to everybody.
    Thanks,
    Gourisankar

    Hi
    with these you can check syntax errors and performance points
    Hi
    these all are doing t he same thing that is checking the program for better performance
    Tools for Performance Analysis
    Run time analysis transaction SE30
    SQL Trace transaction ST05
    Extended Program Check (SLIN)
    Code Inspector ( SCI)
    Run time analysis transaction SE30 :This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
    SQL Trace transaction ST05: The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
    The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on a particular database table of the ABAP program would be mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
    The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
    To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.
    Extended Program Check
    This can be called in through transaction SE38 or through transaction SLIN. This indicates possible problems that may cause performance problems.
    Code Inspector (SCI)
    You can call the Code Inspector from the ABAP Editor (SE38), the Function Builder (SE37), the Class Builder (SE24), or as a separate transaction (SCI).
    The Code Inspector indicates possible problems. However, note that, especially with performance issues: There is no rule without exception. If a program passes an inspection, it does not necessarily mean that this program will have no performance problems.
    reward if usefull

  • Wht r post installation steps of BW 3.5 & how to check it installed correct

    Hi,
    Have installed BW 3.5
    At end of installation is ask me abt SLD
    Im not selecting SLD
    send me BW 3.5 Post  installation guide and how to configure with R/3 4.7 Server or ECC 5.0 or ECC 6.0
    I don't need SAP offical guide, I need word document with step by step picture.
    how to check it installed correct
    mail me <email address removed by moderator>
    Edited by: deepak kajale on Dec 3, 2008 2:25 AM
    Edited by: Siegfried Szameitat on Dec 3, 2008 8:36 AM

    >
    Markus Taxacher wrote:
    >Is the only possible way to migrate the BW 3.5 to ERP/ECC 6.0?
    > Whats the easiest way for upgrading to 6.0?
    >
    > Best regards,
    > Markus
    Hi, you cannot use BW3.5 you must have BI7 (not ECC6!) to install BCS 6 - BCS sits on BI (formerly known as BW).
    It doesn't matter what version of source system you have, you can still collect data from ERP 4.6, you don't necessarily need ECC6.

  • How to check the OLite version and isntalled patches?!

    Hi,
    A couple of months ago we installed the consolidated patch 9535503 in the Mobile Server version (10.3.0.2.0). All the clients (WIN32) were supossed to make a synchronization with mSync.exe and install the patch when exit the sync (similar to first installation)
    There is now a client which faces the same bug (or this looks like) and i don't know how to check if it is possible to check if the above patch has been installed in the client or not.
    Any idea?
    Thanks in advance...
    Tomeu

    the device manager should be running, if not start it up. the client version should be on the main display screen, and you can see the individual component versions in file>version
    If it is patches you are looking for, open the polite.ini file and there should be a section at the end [DMC.UPDATE] that should show the installed patches

  • HOW TO CREATE UNIT OF MEASURMENT IN SAP

    HI ALL,
    PLEASE HELP HOW TO CREATE UNIT OF MEASURMENT  IN SAP NM/S
    GIVE ME THE SCREEN SHOT OR STEPS IMM.
    THANKS
    HAPPY

    HI,
    please check the below link for creation of UOM.
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/create-unit-of-measure-1339786
    transaction code to create uom is CUNI and you should have an ISO code for that.
    Regards,

  • How Adobe checks student status?

    I just bought Adobe Creative Cloud for students and my question is how Adobe checks my student status? I didn't receive any email on my .edu account or anything. Do they check it right away during sign up process or they check it after some time? How does it work?

    Hi Kacperel ,
    We collects the academic information as a separate step during the purchase process. However, We performs a spot check on these customers later on. During the spot check process, the education team pulls up the details of a percentage of these customers and validate their eligibility using standard guidelines. If the education team can't validate the customer’s eligibility, then they reach out to the customer requesting further information. If the customer doesn't provide the eligibility documents within 14 days, then their subscription is canceled.
    You can keep using the CC Edu Membership.
    Let me know if you need more info.
    Thanks!
    Eshant

  • The database structure has been modified - how to check if it happend?

    Hello,
    I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
    My question is - does anyone know how to check if database structure has been modified?
    Regards,
    Hmg

    Hi Szymon,
    I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
    In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
    I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
    Satish.

  • How to check connection from SAP to reservation system?

    Dear Experts,
    May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
    Thanks.

    Hi
    You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
    For more information, see Technical Prerequisites for Travel Planning--
    Technical Prerequisites for Travel Planning
    Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
    Connection to an External Reservation System
    The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
    u2022 Availability query of travel services
    u2022 Transfer of additional information about selected travel services
    u2022 Price information
    u2022 Processing of reservation by the respective provider
    u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
    In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
    In order to carry out online booking via AMADEUS the following must have been carried out:
    u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
    u2022 A network connection to the AMADEUS computer center must have been opened
    u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    For questions about registration, contact the SAP & AMADEUS Competence Center:
    SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
    Cheers
    Mukta

  • How to check SSO user from database?

    Hi:
    I've posted this topic in Forms forum:
    How to check SSO user from database?
    then as I've been told, it's better to post it here, so ...... here is the question:
    I'm writing a "before delete trigger" to insert into log table before delete. Is there a way that I know from database the current SSO user when SSO users share one database user?
    Just like in Oracle Application Express there is v('APP_USER') to know the current user.
    Saad,

    End users are manipulating data through Oracle Forms(and SSO through portal) and the thing I need is to trace the SSO username from database without modifying forms, I mean purely from database taking into consideration that SSO users are sharing one database user. Is it possible?
    Saad,

Maybe you are looking for