BCT 7.0
Dear Gurus,
do we have all objects needed for a full upload in BCT 7.0? that we can activate
same like we have the whole upload chain in 3.5
how you know on RSA1 if the DataSource, infoSource or other objects are 3.5 or 7.0 version?
they are preceded by a white square?
all BI objects can be in both versions?
how you see what version they belong?
your help will be well rewarded!
thank you, Fred
Is it best option to activate directly BCT 7.0 infoCubes with "before and after all objects"?
like I use to do on 3.5 and activated the whole upload chain
Similar Messages
-
Couldn't find BCT DataSources listing for CO-PA ?
Hi,
Can you please help me understand below issue?
I have checked 'Profitability Analysis' (CO-PA) BCT at below URL.
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
Why are the DataSources missing in the contents? (with '+' sign where you can drill down)
Thank you,
Lakshmi
nullHi Lakshmi,
COPA Data sources are not delivered as a part of Business Content
You have to Generated or Create the COPA Data Sources based on the Customized Operating Concern in Source System.
Regards,
Sreedhar -
Hi ,
i am activating BCT cube s in BI 7.0.
i am using data flow befoer option.
it gives it gives to errors for every time.
Error1 : 0SOLD_TO_ODB_ MATCDS is not availbule.
Error2 :
Runtime Errors TIME_OUT
Short dump has not been completely stored (too big)
Short text
Time limit exceeded.
What happened?
The program "SAPLSEU2" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
Error analysis
After a specific time, the program is terminated to make the work area
available to other users who may be waiting.
This is to prevent a work area being blocked unnecessarily long by, for
example:
- Endless loops (DO, WHILE, ...),
- Database accesses with a large result set
- Database accesses without a suitable index (full table scan)
The maximum runtime of a program is limited by the system profile
parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
time limit is
exceeded, the system attempts to cancel any running SQL statement or
signals the ABAP processor to stop the running program. Then the system
waits another 60 seconds maximum. If the program is then still active,
the work process is restarted.
it is very argunt
i will give more ponts for fast reply...
Thank u
PSRHi PSR,
Error 1: It is appearing because the object 0SOLD_TO_ODB_ MATCDS is not avaialable in Delivered version. Just check if you need this object in your scenario. Uncheck the install checkbox for this object when you install the BI content and this error will not appear.
Error 2: This is appearing because you maximum runtime for the dialog work processor is exceeded. To avoid this select 'install in backgroud' from install menu.
Hope this will be helpful. Thanks.
Sumit -
How to customize standard BCT InfoCubes?
Hi gurus,
I am new to BI.I got one scenario like adding 2 new user defined InfoObjects into the cube along with standard business content infoobjects which i delivered with BCT InfoCube (eg:0PAPA_C01).Is it possible to use the same infocube enhance with 2 new InfoObject?. how can we customize the standard iinfocube?. is this recommanded?. or we need to use BCT infocube as a templet for zcube?.
Thanks & Regards,
BharathHi,
As said in the previous posts we can enhance the standard cubes, but is not recommonded, Better u make a copy of the stardard cube and do the necessary changes to this new cube.
Khaja -
Credit memo related Data not reflected in BCT Query
Hi Experts ,
If anyone can help me .
Problem : I have loaded data in 0SD_C03 for sales analysis. Everything is alright and all data except Credit Memo related data are showing . During the selection in query the C/D posting + Doc Categ + Net Value forms the output value for Credit memo but it is not showing . The SD doc categ has credit memo records in VBFA table . Now i don't understand why data related to Credit memo is not retrieved in the query . I am using the standard queries and std BCT objects only .If anyone have come across please share your experience .
ThebaCheck in your Cube fact table whether you have entries with document category O - for credit memo
If not, ensure cube has the data and your query do not have any exclusion filter dor document category O. Check in PSA also, if not there your extractor is excluding the credit memo records -
Dear Experts,
We are working on BI 7.0 Ehp1 system. Our system SP levels are as below:
SAP_ABA 701 0006 SAPKA70106 Cross-Application Component
SAP_BASIS 701 0006 SAPKB70106 SAP Basis Component
PI_BASIS 701 0006 SAPK-70106INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0004 SAPKITLRD4 SAP Solution Tools Plug-In
SAP_BW 701 0006 SAPKW70106 SAP Business Warehouse
BI_CONT 705 0002 SAPK-70502INBICONT BI_CONT 705: Add-On Installation
ST-A/PI 01N_700BCO 0000 - Servicetools for other App./Netweaver 04
However, I don't find 0HR_PA_PA_1 (Headcount) listed when I searched DataSources in Business Content of our BW System. I have been through a lot of threads on the forum and noticed most of the threads are fairly old. Not quite sure if to believe those versions.
When I checked with one of my friends who is on a lesser SP levels of BCT (BI_CONT 705 0001 SAPK-70501INBICONT BI_CONT 705: Add-On Installation) as compared to us, he is able to see the same DataSource listed in his BCT which is a BI 7.0 system too.
I want to use this DataSource to load 0PAPA_C02 by sourcing data from BW Development and also pulling some data from 2 other DSOs.
However, my current challenge is to get this DataSource in our BI 7.0 System.
I am not sure what could have gone wrong. Any help is very much appreciated.
Thanks,
ChanduHI ,
This is a Old Datasource , and it requires some manual customisation , refer the SAP note below
Note 336229 - Use of InfoCube 0PAPA_C02/InfoSource 0HR_PA_PA_1
Symptom
You want to use InfoCube 'Headcount' (0PAPA_C02) and the corresponding InfoSource 'Headcount' (0HR_PA_PA_1).
Even though you transferred the data from the Business Content, the transfer rules are not complete for the InfoSource, or DataSource 0HR_PA_PA_1 does not exist or is not complete.
Other terms
Headcount, BW, OLTP, HR, extraction, non-cumulatives, SBIW, Business Content, activation, transfer
Reason and Prerequisites
The use of this content requires some manual advance activities.
Solution
Extraction of master data in the BW System as transaction data InfoSource:
InfoSource 0HR_PA_PA_1 is supplied by DataSource 0HR_PA_PA_1, which only exists in a BW System.The corresponding extractor reads the master data tables for InfoObjects Employee (0EMPLOYEE) and Person (0PERSON) and provides changes to these time-dependent attributes as non-cumulative value change.
The DataSource supports the 'Full Update' mode only. Extraction in delta mode would not reduce the extraction time since the determination of the delta needs extreme effort with this DataSource. For this reason, the delta mode was not implemented.
Note that the system only provides changes of person attributes if also employee master data exists for this person.
Do the following steps in your BW System:
1. Transfer the Business Content in the Administrator Workbench:
Choose InfoCube 'Headcount' (0PAPA_C02), collect all objects with grouping 'Data flow before and after' and copy them from the Business Content afterwards.
Check whether key figures 0ANSAL_NC / 0ANSAL_VC, 0HDFTE_NC / 0HDFTE_VC and 0HDCNT_NC / 0HDCNT_VC were activated in the process.In addition, InfoCube 0PAPA_C02 itself, InfoSource 0HR_PA_PA_1 and the respective update rules should be active.
2. Customizing of DataSource 0HR_PA_PA_1:
The following step is relevant to BW 2.1C only:
Because the extractor for this DataSource requires the activation of certain InfoObjects (and thus the existence of these data elements), the extractor can only be delivered in modules which must be activated manually.For this purpose, you must make modifications at two locations in function group RS_BCT_PA_EXTRACTION (removal of the respective comment characters for the activation of the Includes):
1. LRS_BCT_PA_EXTRACTIONTOP:old: * INCLUDE rs_bct_pa_extraction_top.new: INCLUDE rs_bct_pa_extraction_top.
2. RS_BCT_PA_GET_DATA:
old: * INCLUDE rs_bct_pa_get_data.new: INCLUDE rs_bct_pa_get_data.
In BW 3.0A, this is carried out automatically when activating the DataSource. As of BW 3.0A Patch 7 and BW 3.0B, this step is obsolete since programs are generated instead.
BW IMG (Transaction SBIW): Transfer of DataSource 0HR_PA_PA_1 (Application component DM)
Postprocess DataSource 0HR_PA_PA_1:
Add the following fields to the extract structure (Customer-Append ZARSBCTPA_0HR_PA_PA_1 to extract structure RSBCTPA_0HR_PA_PA_1):
Component Component type
EMPLOYEE /BI0/OIEMPLOYEE
CURRENCY /BI0/OICURRENCY
EMPLGROUP /BI0/OIEMPLGROUP
EMPLSGROUP /BI0/OIEMPLSGROUP
EMPLSTATUS /BI0/OIEMPLSTATUS
HRPOSITION /BI0/OIHRPOSITION
JOB /BI0/OIJOB
ORGUNIT /BI0/OIORGUNIT
PAYRL_AREA /BI0/OIPAYRL_AREA
PAYSCALEAR /BI0/OIPAYSCALEAR
ESGFORCAP /BI0/OIESGFORCAP
PAYSCALEGR /BI0/OIPAYSCALEGR
PAYSCALELV /BI0/OIPAYSCALELV
PAYSCALETY /BI0/OIPAYSCALETY
PERS_AREA /BI0/OIPERS_AREA
PERS_SAREA /BI0/OIPERS_SAREA
MAST_CCTR /BI0/OIMAST_CCTR
CO_MST_AR /BI0/OICO_MST_AR
COMP_CODE /BI0/OICOMP_CODE
COUNTRY_ID /BI0/OICOUNTRY_ID
ENTRYDATE /BI0/OIENTRYDATE
SALARYAR /BI0/OISALARYAR
SALARYGR /BI0/OISALARYGR
SALARYLV /BI0/OISALARYLV
SALARYTY /BI0/OISALARYTY
PERSON /BI0/OIPERSON
DATEBIRTH /BI0/OIDATEBIRTH
GENDER /BI0/OIGENDER
NATION /BI0/OINATION
PERSLANGU /BI0/OIPERSLANGU
COUNTRY /BI0/OICOUNTRY
COUNTY_CDE /BI0/OICOUNTY_CDE
POSTAL_CD /BI0/OIPOSTAL_CD
REGION /BI0/OIREGION
HDCNT /BI0/OIHDCNT_VC
ANSALARY /BI0/OIANSAL_VC
PAYPCT /BI0/OIHDFTE_VC
Enter the names of the fields exactly as listed in the note. Ignore messages of type:
'Field EMPLOYEE is not within the customer namespace.'
If you extended 0EMPLOYEE or 0PERSON by user-specific attributes, you can also include them in the extract structure or in the InfoSource and the InfoCube.Until further notice, SAP recommends that you only include new characteristics and no key figures.
Check marks have to be removed for all new fields in the 'Hide field' column (Transaction RSA6 for application component BW-DM). You can only use fields EMPLOYEE and CALDAY as selection fields.
3. Replicate DataSource 0HR_PA_PA_1 in the Administrator Workbench / Source systems (your BW System as a source) - application component personnel admistration (PA-PA), and assign the DataSource to InfoSource 0HR_PA_PA_1.
Special features of InfoCube 'Headcount' (0PAPA_C02):
Compounding of InfoObjects and source systems is not supported.
First, execute the attribute change run in order to take into account master data which have already been loaded into the BW System but not yet activated.
For technical reasons (Non-cumulative method), the age or seniority fields cannot be supplied directly from the InfoSource.They must be modelled as virtual key figures and characteristics. The corresponding logic for these fields is not delivered until BW 3.0A.
All attributes of 0PERSON and 0EMPLOYEE must be time-dependent.
Maintenance of the validity slice (Transaction RSDV) for InfoCube 0PAPA_C02 after the first load of data:to-mode 'Fixed value' and '31.12.9998' as a date
Regards,
Sathya -
Does pure activation of BCT DataSources decrease performance?
Hello,
if I just activate (all) datasources from BCT in an ECC system (without actually using them for data uploading to BW), does this decrease any performance in the ECC? Or is it performance wise neutral as the activation only creates some metadata?
Full points will be assigned!
Thanks a lot,
GermanHi,
keep in mind, that the Data for BW is taken out of the DeltaQueue.
Before the Data achieves the Deltaqueue it is either stored in VBDATA or else in another QRFC-Queue (I call it extraction queue). From where its coming into the Deltaqueue is controlled by the method maintained in the logistics-extractor.
The VBDATA is the table where ALL POSTING RECORDS ARE STORED!
So when you have activated the extractors for logisitcs, all posts of documents in the system (e.g. Sales docs ...) run through the VBDATA as well as the V3-Posts of these documents for R/3.
If the V3-Programs are not scheduled, there will be an overflow to the table and the system is dead, means none can post any documents.
This can only occur if unseralized V3 is chosen.
Delta Queued writes data into the QRFC-Queue.
As long as you haven't run the V3-Programm it will stay there.
The V3-Programm takes the data and writes it to the DeltaQueue for BW.
If no successful init has taken place, the data is gone then.
The request from BW only takes the data out of the delta queue, not out of the extraction queue I've descirbed earlier.
Cheers
Sven -
HR BCT Extractors no fecthing any Data.
Hi,
I am using the follwoing HR BCT extractors. I facing problem in extraction data.
1. 0HR_PA_OS_1 : When I am checking this DS in RSA3, it is not extracting any data even though data is available in tables HRP1000, HRP1001, PA0007 and HRP1007.
2. 0HR_PT_2 : When I am checking this DS in RSA3, it is not extracting any data even though data is available in tables PA0001, PA0007, PA0202, PA0203,PA2010 and PCL2.
( Configuration side there are reporting time types maintained in SBIW- Time management as per R/3 config )
Any suggestions.
Thanks in Advance.
Regards,
RCHi,
I am using the follwoing HR BCT extractors. I facing problem in data extraction.
1. 0HR_PA_OS_1 : When I am checking this DS in RSA3, it is not extracting any data even though data is available in tables HRP1000, HRP1001, PA0007 and HRP1007.
2. 0HR_PT_2 : When I am checking this DS in RSA3, it is not extracting any data even though data is available in tables PA0001, PA0007, PA0202, PA0203,PA2010 and PCL2.
( Configuration side there are reporting time types maintained in SBIW- Time management as per R/3 config )
Any suggestions/ideas.
Thanks in Advance.
Regards,
RC -
Hello everybody
I need activate BW BCT Emissions Manegement, but i cannot translate to portuguese.
Anybody have an idea to do this ?Hi Dmitry,
Please, refer to this link:
http://help.sap.com/saphelp_nw70/helpdata/en/4c/10193c66f5dc1ce10000000a11405a/frameset.htm
Regards,
Eli -
Hi Experts ,
SAP provided business content for BW, we know that BC contains datasources, infocubes, ods objects, queries and more. And also we know that we can install and use BC for reporting. And sometimes we use other source systems like SAP r/3, flat file and others for reporting. What exactly i want to know in what situations we use SAP r/3 instead of using BC. If anyone can give me some realtime scenarios and explain where exactly this BCT fits in??Therotically i know that in most of the applications 70% development is done using BCT n 30% customization.Hi,
As you said BC contains infocube, ods, infosouce, etc. Whenever the client requirements comes, first we will check into Business content.
Let's take an example for sales company. The client wants to anlyse their sales for a particular year. First we will look into BC whether any cubes or ods availabe for to meet the client scienario or requirements. if it is ok, we will install it and do modification according to the requirements.
coming into SAP r/3.
SAP r/3 act as a Source system. let's take an example of sales company.Customer maintains its all transaction(like sales, purchasing,delivery) in R/3 system. Customer can create sales order , purchase order etc and all the data maintained in R/3 as table.
If client wants to analyse this r/3 data, they will upload tis data into bw and they will analyse.
if the data is availabe in excel(csv) file instead of r/3, they use flat file updation.
Regards,
Senthil Kumar.P -
Problem installing infosource from BCT
Hi gurus,
I installed the master data characteristic 0BBP_BIDCAT from the BCT (InfoSources by Application Component ==> SAP Application Components ==> Cross-Application Sources ==> Product ==> Master Data Product ==> Product Category (Bid Invitation)). I chose the "In data flow before" grouping and the all the process was error-free. Then, when I go to the Modeling option, in RSA1, and choose "InfoSources", the InfoSource 0BBP_BIDCAT is not presented and I cannot load this master data. Any ideas?Hi,
You can also try out with option the only neccessary infoobjects and try to install the business content and check it out.Also when you enter the modeling screen just refresh the screen and observe it.
Hope this helps,
Thanks,
vrrp -
Authorization object to disable BCT INSTALLATION
Bw experts,
We are needing to limit the access of BCT object install (business content BW) in transaction RSA1 or RSORBCT.
Do you know if exists an "authorization object" that it disables the commands INSTALL ?
Tks
PortellaHi Roberto ,
We have some developers BW that need at least visualizing objects BCT (but not installation) .
If we exclude the transaction RSORBCT thus we continue having same access to BCT by RSA1 .
We are testing the object S_RS_ADMWB , do you know it ?
Tks
Portella -
Exadata在rman备份时候的offloading功能需要数据库打开BCT吗?
同题目,BCT=Block Change Tracking。
oracle数据库中BCT是使用文件来记录一组数据块中,修改过的数据块做个标记。
rman备份时,exadata的 offloading是如何实现的呢?exadata的 offload incremental backup optimization 是基于数据块为单位, 而block change tracking通过位图维护一组block, 所以 offload incremental backup的 粒度更细化 也更智能。
With Exadata,changes are tracked at the individual oracle block level rather than at the level of a large group of blocks. This result in less I/O bandwidth being consumed for backups and faster running backups.
*<font color="red" size="2" face="courier">如果觉得本回复有意义,请点击本条回复右手边的Correct按钮,谢谢!</font>*
如何在OTN中文技术论坛提一个问题?
论坛礼仪需知及学习oracle的方法论
Maclean Liu
Oracle Database Administrator
Oracle Certified 10g/11g Master
www.askmaclean.com -
BCT - how to find the difference between installed BCT and the newest BCT?
Hi,
How do I find the difference between installed BCT and the newest BCT?
or find a description of the newest BCT?
Thank you.
- GunnarHi,
Thank you for your answer.
I am aware of the possibilities you mention.
I am looking for a way to find the parts of the business content that has been modified since I installed our current version WITHOUT installing anything.
That is for example:
If F&R business content has been moved from 3.x technology to 7.0
If there is changes to the F&R content at all
-> if our current version of business content already contains the newest version of Business Content for F&R, then it is not a prerequirement to an F&R project that we update business content.
The possibility to see that the only changes might be in the area of SAP HCM ...
Thank you.
- Gunnar -
Is there any BCT Datasource which could extract The PO History data?
Hi all,
Is there a BCT datasource which could extract the PO history data ?
Thanks in advanced.
Shon.Hi,
definitely..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/eee637f5a44276b718751a19dcc3bd/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/6d5fa811684ad6af14915b81d32b4e/frameset.htm
regards
Happy Tony
Maybe you are looking for
-
I have Windows 8.1, 64 bit, Flash Player 15, and use Firefox browser, Flash Player keeps crashing on every web page including Adobe, I cannot play games, this is a screen shot of the problem I have done all the FAQ's disabled hardware acceleration, c
-
Lost my photos from photostream after upgrading to ios8
Hey I recently lost all my iMac data through some kind of hardware damage, so I lost all the photos I had stored in Photo Stream. But to my relief, all photos from Jan 2014 on were still in the Photo Stream folder on my iPhone. But then I upgraded to
-
Spaces in between images ; textbox help
in my dreamweaver HTML page, after i insert say like, 5 images, they clump all together, and i'm unable to separate them (like how i'd be able to do them in microsoft powerpoint) is there anyway that will enable me to freely shift around these images
-
Dear All, I am cancelling MIRO through mr8m. I have changed exchange rates in OB08. But still I m getting error massage : Balance is not equal to ..... Pls guide me Regards Gitesh
-
[Forum FAQ] How to upgrade the Linux Integration Service
Symptom When you move a Linux guest virtual machine from the legacy system to Windows Server 2012 R2 Hyper-V host, you may face the incompatibility issues. The most common problems are that the mouse pointer maybe a little inaccuracies, the guest VM