BD52 Change Document Items - How to copy from one message type to another

Hi,
I have created a new messaget type for idoc MATMAS03, and has to implement change pointers for the new message type.
I will use the same fields to trigger the change as is used for message type MATMAS. My problem is that it will be a really tiresome work to manually add all the fields in BD52 (605 entries).
Is there any way that I can copy the entries from message type MATMAS to my new message type ?

Hi Barbara, I can't explain this but it seems to be working now, even with the Tiff format.  I'm doing exactly what I was doing before - selecting an area on the photo, then pressing edit - copy.  Before I was getting an error message, but now I can copy the selection into another Tiff.  I must be doing something different or I must have changed a setting - I have no idea what, but the problem seems to have gone away. If only every problem was that simple! 
The upshot is I can now edit in both Tiff and PSD and am really delighted with the help I received from this forum.  I know they were very basic questions, but sometimes those are the hardest to answer.
Many thanks to everyone who responded, John

Similar Messages

  • HT4614 Can I use Thunderbolt to Thunderbolt cable to copy from one macbook air to another?

    Can I use Thunderbolt cable to copy from one Macbook Air to another Macbook Air?

    Of course, but you will have to start one of the Macs into Target Disk Mode, pressing T key while the Mac is starting with the Thunderbolt cable connected, so the MacBook Air in Target Disk Mode will appear on the Finder sidebar of the other Mac as an external disk, so you can copy and transfer files from and to it

  • How to switch from  one Data base to another data base

    Hi,
    How to switch from one Data base to another data base if first data base server like in restoring,blocking,network disconnected state.
    Please help out for the same.
    Regards,
    Anilkumar

    Sounds like a problem for forums/support from the DB provider, as this problem is normally solved through some form of HA provided by the DB (or some cluster software, but still not Java) with, normally, a shared (virtual) IP address.

  • Material Transfer From one Material Type to another should not be possible

    Dear Gurus ,
                        I have a issue here i want to lock the transfer posting from one Material Type to Another Material Type . The point is the Transefr Posting Shuold happen from same Material Type  . So can anybody help me out that what should I do for the same

    Hi ,
            I tried for the same but its not working . I just kept a Break point in this exit . Tried to transfer from MB1B its not stopping at the Break Point Can U suggest as I am doing it from MB1B .
    Regards
    Shankar

  • Can I and How do I copy from one iWeb site to another.

    I currently have a few different versions of my web site stored as different doman.sites I would like to copy a blog entry from one into another. Is it possible to do that and if so how. I am sure I could copy all the text and all the pictures separtly and then paste them in, but that would be tendious as I would either have to keep opening and closing iWeb between the different versions or have them both open on separte accounts on my computer and keep jumping back and forth between them. Any suggestions? Let me know.
    http://web.mac.com/captrustywildrice/
    [email protected]

    what exactly would I copy from one folder to another to be sure that the blog entry that I am copying shows up in the blog menu? I would like to be able to copy everything together, dates, links at the bottom, hit counter and all, rather than piece by piece off of the site or from another iWeb account. Thanks!

  • How to copy from one Version to Another version with single click

    Hi Everone,
    Users wants to copy from one version to another version with single click only. I.e Actuals to Planning etc.,
    They don't want use standard COPY Data manager package to do this activity as this involves many steps.
    Please let me know Is there any way to COPY with single click. Thanks in advance!!
    Regards,
    Viswanath

    Hi Viswanath,
    Use /CPMB/DEFAULT_FORMULAS
    Then edit automatically created advanced script:
    PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%,%CURRENCY_DIM%,%TIME_DIM%")
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SELECTION,%SELECTION%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,DEFAULT.LGF)
    Remove bold lines and change the script name in line with your script name:
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
    TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,YOURLOGICNAME.LGF)
    Vadim

  • -36 I/O Error copying from one external drive to another? Ugh...help?!?

    Hardware:
    Apple Powermac Dual 2.5 GHz G5
    512 MB RAM
    External Drive 1: LaCie 250 GB (Firewire 800) (contains 150 GB data) (formatted MacOS Extended)
    External Drive 2: LaCie 400 GB (Firewire 800) (contains NO DATA) (formatted MacOS Extended Journaled)
    Software:
    Mac OS 10.4.3 (Tiger)
    I've sucessfully run the firmware updater (http://www.lacie.com/support/drivers) "LaCie Update Tool v1.3.3" for both LaCie drives to the latest version - 107.
    Background:
    Before I updated to the latest firmware and before I changed Drive 2 to journaled, I had problems copying files from both drives to the other. I get this error: "The Finder cannot complete the operation because some data in "filename here.ext" could not be read or written. (Error code -36)."
    I did some research (http://www.appleerrorcodes.com/) to discover that Error -36 is an I/O error.
    My goal is to reformat Drive 1 (250GB) to journaled. After some reading, I have decided to do that for both of my external drives.
    Question:
    I'm at the point now where I need to copy the data from Drive 1 to Drive 2 and this error is still occuring. I need to 1) understand why it's happening and 2) find a solution so I can copy this data from Drive 1 to Drive 2.
    Future Question:
    Once the data is copied, I will then reformat to journaled. I'm then going to decide between scheduled backups or setting up a RAID, but I'll post this issue as a separate question. I first need to understand and fix this copy I/O stuff.
    THANKS!
    Dual 2.5 GHz G5   Mac OS X (10.4.3)  

    Using the Disk Utility with the Mac OS, I just realized that I can't verify or repair disk permissions on either of these external LaCie drives. I can on my startup internal disk, but not the external ones. Any idea why?
    I replaced the FW800 cables, but I still cannot copy from one external to the other. The connections are like this:
    Drive 1 (250 GB) is connected to the back of my G5 via FW800.
    Drive 2 (400GB) is connected to Drive 1 via FW800 cable.
    I'm in need of some help!
    Robert
    Dual 2.5 GHz G5   Mac OS X (10.4.3)  

  • HT5622 How to switch from one apple store to another

    How to switch from one apple store to another

    Follow this procedure:
    1. Go to Settings > iTunes & App Stores > Apple ID.
    2. Tap your Apple ID.
    3. Tap View Apple ID.
    4. Enter your password.
    5. Go to Country/Region in the popup window to change to the desired store.
    See also: http://support.apple.com/kb/HT1311

  • How to shift valuation class from one material type to another material type ?

    I have came across following weird scenario:
    We already created huge no.of materials of material type say ZABC with two valuation classes say 1100 and 1200(GL accounts for these VCs for different posting keys in OBYC settings are same). Account category reference for this material type is 0010.
    After that we created new material type say ZPQR  with new Account category reference 0025, and valuation class 1200 is linked with this ACR 0025. Because of this, valuation class 1200 disappeared from material type ZABC. In order to avoid inconsistency, we need to have valuation class 1200 linked with older material type i.e.ZABC.How we can do this ? What impacts must have happened in this period (from MM/FI) in the system, where valuation class get shifted from one material type(ZABC) to another material type(ZPQR)....please help us in this scenario.

    Thanks Sana,
    We are also looking for the solution provided by you i.e. reassign ACR 0010 to Valuation class 1200.
    Your are also correct in terms of  statement "config doesnt allow me to assign same valuation class to 2 different AREF (Account reference number/Account category reference).
    I wanted to know, what are the possible impacts in the system during this re-assignment of ACR to old material type ZABC.
    Regards,
    Sudarshan.

  • How to transfer from one external drive to another?

    I am trying to move files from one external drive to another.  I can write to both drive from my Mac.  When I do a large transfer using Finder, I only get a few files and an error code 50.
    I'm using two Seagate drives, one formatted for Mac only and where I'm writing to, and one formatted for PC and Mac.  I have written and read successfully to both drives.

    I moved some movies and some seldom listened music (coped the files) into a folder on the Lacie drive. Then I reimported them to the main itunes library while holding down "option". This created a link to those files to the external. the files show up in my itunes but cannot be played unless i have the Lacie connected to them.
    See this link.
    http://www.maclife.com/article/howtos/how_split_your_itunes_library_across_multi ple_locations

  • How to load from one BW System to another BW System

    Hi Guys,
    I want to load the BW data from  PAX(BW-Production System) to PRX (BW-DCC-System) .Is there any steps to load it from One BW System to another BW System.
    Any doc available to do the loading from One BW System to another BW System.
    Pl mail to [email protected]
    Send me the steps .
    Points will be assigned.
    Thanks,
    Chinna

    Hi Chinna,
    Loading from one BW system 2 another primarily involves loading data from one infocube to another in other BW system.
    U can create export data sources from infocubes ( rt. clk on infocube n then select  ) and then use these datasources to load data into the infocubes of othar system in usual way.
    Try this out.
    Hope it helps,
    Manish

  • Assigning data from one Table type to another structure

    Hi every one,
    I have a table type X sent from one function module to another Proxy generated method which has the parameter defined as a structure.
    I have declared a variable Y as a LINE TYPE OF X.
    Then I have this statement which fills up the data.
    READ TABLE X INTO Y INDEX 1.
    The data is transferred from X to Y.
    Now i need to send this to the proxy generated Function module which has a structure Z.
    Now when i say MOVE-CORRESPONDING Y to a variable of type Z, it says it cannot be converted.
    The structure in proxy generated FM has different data type but the same domain as that of standard one.
    Everywhere it is prefixed with YY.
    And also has one additional Controller tab inserted,
    Can you guys tell me how to move the data from this table type to the structure.
    - Venkat

    Hi,
    Declare a variable of line type Z.
    Move corresponding values from variable X to this variable.
    Append this variable to the table Z.
    Try this.
    Regards,
    R.Nagarajan.

  • Get the mapping values from one message mapping into another message mappin

    Hi All,
    I created two graphical message mappings. In first message mapping i created one user defined function and set one global container parameter and I need to use this parameter in my second message mapping user defined function. But the global container parameters can be used in different user defined functions in same message mapping. So is there any way to use the values which are set in one message mapping into another message mapping. If yes, please help me how to get?

    Hi Koteswara rao,
      As you said global container parameters from first message mapping are not accessible from second message mapping program.
    i haven't faced situation like this.but, if you have some unmapped field in target message in first message mapping,you can put global variables data in that unmapped field.
    anyway the output of first message mapping would be input for 2nd messages mapping,so you can access global data(unmapped field filled with global data in 1st MM) from 2nd mapping program..
    Cheers,
    Jag

  • How to copy from one image to another

    Hi, I'm struggling with the most basic process in PSE 10. I have selected an area in a photograph - now I want to delete the rest of that photograph and add the selected area as a layer to another photograph. Having spent hours searching online, I'm hoping someone can give me an answer please.
    John
    Message type was edited by: Brett N

    Hi Barbara, I can't explain this but it seems to be working now, even with the Tiff format.  I'm doing exactly what I was doing before - selecting an area on the photo, then pressing edit - copy.  Before I was getting an error message, but now I can copy the selection into another Tiff.  I must be doing something different or I must have changed a setting - I have no idea what, but the problem seems to have gone away. If only every problem was that simple! 
    The upshot is I can now edit in both Tiff and PSD and am really delighted with the help I received from this forum.  I know they were very basic questions, but sometimes those are the hardest to answer.
    Many thanks to everyone who responded, John

  • Copying from one iphoto library to another/working with multiple libraries

    hi-
    my current workflow involves having a 'master library' on one of my external HDs where i store ALL of my images (35,000+) and a 'working library' in my macbook pro where i dump most recent pics first. typically i dump to the working library & then about every 3 months, i burn those events onto disc(s) from within iphoto, open my master library and copy from the disc into the master library. then i will seasonally clear the working library out other than a few portfolio items i may want to keep there.
    in the past, when i copied onto the disc and then into the master library, the event names and ratings would copy over too (although if i'd keyworded them, that would get screwed up, so i stopped). now it's not working! the correct event names and ratings show up on the disc, but they are not copying into the master library. i believe this is since i upgraded to ilife 09.
    any ideas? it is essential to my current workflow to preserve those event names and ratings. i turned 'autosplit' off in preferences. i tried turning it on. anyone else have experience working with more than one library like this?

    thanks larry, i'll check it out and let you know if that solves it. should the free version be sufficient? looks like this could be a really big help if it actually works, cuz i would like to create a 3rd and 4th library for other purposes but not if it's just going to make things more of a pain for me.
    i assume this should help with the keyword issue i was having before too? (if i keyworded pics in my working library, the keywords on those pics once copied to the master library would be wrong, it would apply other keywords sometimes, most of the time...)
    i appreciate your help.
    - artis

Maybe you are looking for