BD64 - generate partner profile - outbound parameter; wrong receiver port

Hi all,
I'm using a distribution model (transaction BD64) for creating partner profiles in my system.
This works fine, exept for one thing.
The receiver port used in the outbound parameter is wrong.
It's using the tRFC port of the destination system instead of the tRFC port of the SAP XI/PI system.
If I send an Idoc it's now going directly to the destination system instead of going to XI/PI first.
I could modify this manually (which is a lot of work), but I would like to know how SAP determines which tRFC port is used when generating the partner profile and creating the outbound parameters.
Can anybody help me with this?
Reagrds,
Roy

Hi,
According to my knowledge, if you have a receiving logical system name is same as the RFC destination name, then the SAP will take the RFC destination properly and will generate the port automatically (for Ex: if you have a port A00..12 then it will create a port A..13). the generated port will be used in partner profile.
Or
Give a try by assign the RFC destination (The receiving logical system name and RFC destination name should be same) for a port and use it while generating the partner profile by using BD64 or SALE.
Regards,
Venu V

Similar Messages

  • Problem BD64- Generate Partner Profile

    Hello everybody,
    After creation the model view in the transaction SCUA i go in the transaction BD64 and i try to generate the partner profile to the child systems but i got an error as below:
    Object type US, ID BASIS unknown (please observe upper/lower case)
        Message no. E0624                                                                               
    Diagnosis                                                                               
    Object BASIS of type US is not known in the system.                                                                               
    Procedure                                                                               
    Enter a valid object and check the type.                      
        Make sure upper case and lower case are used correctly.                                                                               
    Somebody can help me?
    Best Regards,
    Fábio Karnik Tchobnian

    Hi,
    your question is not really related to SQL Server but to the CUA. Please post your question in a different forum (Netweaver Administrator maybe) and I am sure you will get answer there.
    Sven

  • ERROR WHEN GENERATING PARTNER PROFILE

    I AM GETTING THE FOLLWING ERRORS WHEN GENERATING PARTNER PROFILE
    Outbound parameters for message type MATMAS MATMAS05 could not be created 
    Please enter a valid value for the output mode                            
    Outbound parameters for message type SYNCH SYNCHRON could not be created  
    Please enter a valid value for the output mode

    Hi Willard,
    Checl the output mode and outbound parameters for those both of message types.
    Hope this helps you..
    Regards,
    Kumar.

  • Generating partner profile for File to Idoc(CREMAS) scenario.

    Dear friend,
    Completed all the steps in SLD, IR and ID.
    I do not know how to create Partner profile and I skipped this step.
    While testing I got the error "Unable to convert sender service  to an ALE logical system".
    I think i got this error because I have not created partner profile.
    Could anybody tell step by step process of creating partner profile including logical system names( Sender and Receiver)?
    I have seen many blogs and i couldn't get clear picture on how to generate partner profile.
    My sender system is XI server and receiver is R/3.
    I have created RFC destination, Port also.
    Thanks in Advance
    Chiru

    generally u create partner profiles using transaction WE20.
    SAP Menu -> Tools -> IDoc Interface/ALE -> Administration -> Runtime Settings -> Partner Agreement (WE20).
    go through this link for step  by steps
    http://help.sap.com/saphelp_nw2004s/helpdata/en/dc/6b808e43d711d1893e0000e8323c4f/content.htm
    http://www.thespot4sap.com/Articles/SAP_ALE_Configuring.asp

  • CUA: Cannot generate partner profile

    Hi,
    I´am implementing CUA in ower landscape. I have the RFC´s and users with their specific roles in Central and child systems, but also I´ve registered the logical systems in BD54 both parts. I had no problems with this SAP process .
    Recently I began to add a new child system(CRM 7.0) when I save this in tx:SCUA all the steps are ok but  the message: "Cannot generate partner profile" appears in the last step. I have reviwed users, roles, RFC´s and logical systems, all is OK.
    I was looking FOR some information about partner profiles:
    http://help.sap.com/saphelp_nw70/helpdata/en/ea/9abf3b4f995f1ce10000000a114084/frameset.htm
    and I found that partner profiles type LS are managed by tx:we20.
    I found in child system that partner profile CRDCLNT100 alredy exist, this is what the SCUA wants to go to create.
    I found also in child system that in transaction BD64 there is not any CUA entry.
    Do you know how to solve this problem.
    Thanks in advance
    Enrique.

    Hi Enrique.,
    you have not generated partener profile.
    Go to BD64 in your parent system then click on change ->Add BAPI then enter the required details.
    there is one field obj.name/reference enter details for both object one by one.
    first for user and click on ok  and then for usercompany then click on save.
    Go to environment menu then click on generate partener profile then click on execute and all must be in green.
    After that go to EDIT menu->Model view->distribute select the child system which you want to add and then click ok.
    If you have multiple client then do same steps for all client.
    After that add system to SCUA.
    Regards
    Arti

  • Generating partner profile in idoc

    hello experts,
    When i am generating partner profile, following error is generated.
    Port could not be created
    RFC destination 0000000810 not specified for system 00000000810.
    enter the rfc destination and restart the generation.
    what is solution for the error?
    Edited by: amar_war on Mar 6, 2011 8:28 AM

    Actually I have already created rfc connection......
    i have connected 2 clients 800 and 810.
    in 800 i have created rfc connection for 810
    in 810 rfc connection for 800.
    i have also created ports....... but its still giving me error...
    is my process is wrong to create rfc connection?

  • What is the difference between generate partner profile and creat partner

    What is the difference between generate partner profile and creat partner profile ?

    Create Partner ProfilesAlthough partner profiles are usually created automatically, because of the unusual inbound and outbound profiles needed on the same system, the manual generation of certain profiles is required.
    The following subsections describe the partner profile settings for the standard client (assumed here to be ALExxxCyyy), as well as for the corresponding dummy client (assumed to be DUMxxxCyyy). The dummy client partner profiles should have been generated by the automatic generation process completed previously. Nevertheless, these should be checked to ensure that all profiles exist.
    Generation of Partner Profiles
    The following messages should be added to the 4xx-ORDR model for ALExxxCyyy to DUMxxxCyyy on the reference client:
    • ORDERS
    • ORDCHG
    • ZINVRV
    • ORDRSP
    • INVOIC
    • FIDCMT
    • The partner profiles should first be generated using the standard auto-generation procedure on the reference client (for SYNCH messages to be created).
    • This model should now be distributed to the both ALExxxCyyy and DUMxxxCyyy.
    • The partner profiles should now be generated on the client being configured (i.e. yyy) using the auto-generation procedure defined in the standard ALE configuration procedures.
    Generate partner profiles for sending system. (Can only do this if at least 1 message type exists against the sending system's LS). This automatically generates the port if the LS and RFC name are the same.
    generate partner profiles tcode BD82
    creating partner profiles tcode WE20
     There are two methods for maintaining the partner profile:
     Maintain partner profile manually:
    To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Target system. Under Outbound parameters, choose the Create outbound parameters icon, and enter the values for the outbound parameters according to the slide Sender: Partner Profile (outbound).
    To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Sending system. Under Inbound parameters, choose the Create inbound parameters icon and enter the values for the inbound parameters according to the slide Sender: Partner Profile (inbound).
     Generate partner profile:
    Prerequisite: The current distribution model is distributed to all participating systems.
    In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (outbound)
    In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (inbound)
    Regards
    Vasu

  • WE20 use&E0336 EDI: Partner profile outbound logical message not available

    Hi
    When I am creating the vendor master, after selecting payment advise by EDI tick under APP Transactions i am issued a warning message as Account XXX has not yet been agreed as being EDI partner  and its directing me to T.Code WE20.  What is the use of this.
    I have maintained WE20 for the vendor and after running payment run (F110) with payment method as E (Electronic payments-BACS) payment medium file is getting created.  But when i go and see the SP01 in the error log the message is shown as E0336    EDI: Partner profile outbound logical message not available. 
    Can anybody explain what is the use of WE20 t.code and why i am getting the error message.
    Brahma

    Hi Deepak,
    I am facing the same problem with a different message type.
    But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
    Have you found the reason for this?
    Thanks,
    Florian

  • Generating partner profile

    Hi all,
    I am trying to generate partner profile but it is showing error as
    NO MESSAGE HAVE BEEN DEFINED FOR SELECTION CONDITIONS IN THE MODEL.
    what could be problum?
    Thanks in advance,
    Shashikanth

    Totally agree with Sanjay, have you checked the logical system name for your client (Txn. SCC4, Double click on your client number and Note the logical system name). Check your distribution model if there is any message going out or coming into this logical system. If yes then check the parameters/select-options used for generating partner profile.
    Cheers,
    Sanjeev

  • Generate   partner profile

    hi guys
    i hve got a problem
    when i generate a partner profile i get an error "NO ACTIVE PLAN VERSION EXITS" for type parameter

    Hi,
    According to my knowledge, if you have a receiving logical system name is same as the RFC destination name, then the SAP will take the RFC destination properly and will generate the port automatically (for Ex: if you have a port A00..12 then it will create a port A..13). the generated port will be used in partner profile.
    Or
    Give a try by assign the RFC destination (The receiving logical system name and RFC destination name should be same) for a port and use it while generating the partner profile by using BD64 or SALE.
    Regards,
    Venu V

  • Error while generating Partner profiles

    Hi,
    I am not able to crate the Partner profile. When I try to Generate the Partner Profiles from the Distribution model (Masterial Master) it give me following error,
    "Outbound parameters for message type MATMAS MATMAS05 could not be created      
    Please enter a valid value for the output mode                                 
    Outbound parameters for message type SYNCH SYNCHRON could not be created       
    Please enter a valid value for the output mode"
    Can anybody tell me how to solve this problem??
    Thanks in stack.

    How did you try to generate the Partner profile?
    Can you pls try the following...
    execute report "RBDCUS15" and give the model view/partner for which the entries needs to be generated.
    Also, give the appropriate values for "Outbound Parameters" like version, packet size and output mode.
    Thanks,
    Renjith

  • Partner Profiles: Outbound parameters

    I want to send a IDOC ORDERS05 to SAP ECC6.0.
    I have a partner type LS.
    In outbound parameters I can not define message type ORDERS ???
    The error message ==> "Logical message ORDERS does not exist"
    Anyone can give some tips?
    Thanks a lot!

    hi,
    when you send IDOCs from XI to ERP you don't use WE20
    it's a competely different procedure
    also XI does not have ERP idoc types (that's why
    you cannot choose it in WE20)
    check out my book to find out step by step how to do it:
    <a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Error in IDOC load for BBP_PCSTAT Partner Profiles

    HI,
    We use BBP_PCSTAT to load p-card transactions in to SRM on an inbound IDOC. This has worked fine for two years & now suddenly we are getting problems!!
    the first record in the interface file loads fine - the idoc succeeds with a status of 53. Each subsequent idoc fails with status of 51 and the following error:
    No partner profile (outbound parameter) could be found using the following key:
    /0000000000/LS//////
    This refers to the key fields in table EDP13:
    RCVPRN  Partner number
    RCVPRT  Partner type
    RCVPFC  Partner function
    MESTYP  Logical message
    MESTYP  Message code
    MESCOD  Message function
    TEST    Test indicator
    Procedure
    Please check the EDI partner profiles.
    Has anyone seen this before?? we are a bit stuck now!!!!
    Many Thanks

    Hi yes, as far as i can see our SRP and ERP systems are in existance in WE20 under logical systems.
    We are using a bespoke program to load these through, as part of the parameter process we have a variant the defines the sender and receiver systems. This variant has not changed & nor has the We20 entries as far as we can see..
    We ran the process one month ago and everythign was fine.
    I dont suppose you are the same Keith Wood worked on the project here at the isle of wight are you?!

  • Task properties - General task -  Partner profile

    Hi Experts,
    I'm using user decision step for manager approval, and in development server i've selected task as general task in task properties and everything was working fine in development server.
    When above workflow development transported to testing server, the task properties are not transported. So, agent assignment is de-activated. And when i'm trying  to set general task attribute in task properties, its saying "Entry in outbound table not found" error message. Can anyone help me in resolving this.
    Entry in outbound table not found
    Message no. E0400
    Diagnosis
    No partner profile (outbound parameter) could be found using the following key:
    DC1CLNT10/LS//HRMD_ABA///
    This refers to the key fields in table EDP13:
    RCVPRN  Partner number
    RCVPRT  Partner type
    RCVPFC  Partner function
    MESTYP  Logical message
    MESTYP  Message code
    MESCOD  Message function
    TEST    Test indicator
    Thanks in advance,
    Siva Sankar.

    Hi Siva,
    I have always found that I need to go make change the agent assignment on custom tasks to 'General' as the workflows get transported - or you can investigate here:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d00a1cb4-913c-2c10-d991-caf663ab9b16&overridelayout=true
    As Jocelyn Dart has said:
    Folks, This is an oldie but a goodie.
    You need to execute program RHMOVE30 to add your General Task settings to Transports.
    Enter your task numbers (you can enter a workflow and use eval path TASK_HIER to pick up all sub tasks) Select the Transport checkbox
    On the second screen
    Select all and press Add to Transport
    Select all again and press Transport/Delete
    You should get a message confirming they have been added to your change request.
    You will see infotype 1217 entries on your transport request.
    However your issue seems to be a different one.  I searched and it looks as though you need to check partner profiles using WE20?  Have you tried this?
    Hope this helps,
    Sue

  • HR master data & EDI partner profiles

    Hi,
    I want to link my user to a PERNR in PA30 (infotype 105 subtype 0001).
    When I try to save, I get:
    "Entry in outbound table not found. No partner profile (outbound parameter) could be found using the following key: .. Please check the EDI partner profiles."
    Where can I define the link between HR master data (PA30) & EDI partner profiles (we20) + what is the purpose?
    Thanks

    Dear JV,
    Let us know on EDI partner profiles.
    In 0105 IT subtype 0001 is System user name.
    It is the linkage point with SAP R/3 and  ESS Portal.
    After maintaince of data in 0105 IT with subtype 1,we can view the details in Portal according to data maintainnace.
    Regards,
    Sairam.

Maybe you are looking for

  • Contacts names not showing in messages

    I need help with this.

  • List of operators in OWB mapping using OMB Plus

    Hi, I got a situation where I need to find out the list of operators names and its type that I used in a mapping. I tried to search but could not find it. Can any body help me regarding this. Thanks in advance Yeswanth

  • Matching Regular Expressions in OBPM 10GR3

    Hi all, How do I match Regular expressions like" Wait For Response" in Strings using OBPM? Any idea? Is there any exact syntax? Because I tried doing this:- for( int i=0; i < testGroup.length(); i++)      if(testGroup.reason.match(regexp : "Wait For

  • No playback of imported QTmov in .SWF

    Hi guys, Can anyone help me please. I'm new to Flash CS3 professional version and I can't quite figure out playback issues with imported QTmov. Wondering if it is a compatibiilty issue since the original .SWF file was Flash 5. After publishing a .SWF

  • How to install Oracle9iAs9.0.2 on AIX4.3.3

    Hi I am a walking man in Oracle9iAs field. Could you tell me the steps of 9iAs_installation before execute the command "runInstaller" Such as : How to set the environment variable and so on