BD64 issue having ECC + BI on the same client

Hi there,
We do have a small instance having ECC and BI in the same System.
The ABAP RFC connection is fine and when Replicated in RSA1 Datasources from SourceSystem R3 went fine.
But I think we have an issue with the Idoc settings.
Went through the doc [http://ecohub.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152?quicklink=index&overridelayout=true] and found that when BD64 it asks me the Sender / Receiver to be different.
Though as mentioned in our case it is the same.
It is really needed to update these settings in BD64 when both systems are in the same System?
Thank you,
A.

Hi Asik,
Thank you for the reply.
Yes, that is right.
We access BW and R3 through the same logon.
I found the issue though !!
Would explain it in case someone faces a similar issue.
1- The ABAP RFC connection was fine.
    Tested and transfered the DataSources fine.
2 - though there was still an issue with table RSBASIDOC not showing Transfer Structure field.
Solution:
Read
     u2022     http://ecohub.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152?quicklink=index&overridelayout=true
     u2022     Setting up Connection between BW and R3 for Data.pdf
     u2022     Step by Step on Changing ECC SourceSystem without affecting Datamodel Objects in BW.pdf
Followed the post:
Step by Step on Changing ECC SourceSystem without affecting Datamodel Objects in BW
1. Go to WE20 and check whether Partner profile T90CLNT090 exist in LS type,if not just add Parnter profile with same and save.
Partner profile Name: T90CLNT090
TYPE: LS
Give:
Ty: US
User: User Name
Lang: EN
and Save.
2. Again re-click on Partner Profile: T90CLNT090
you will see ,there will be some entries in Inbound & out Bound Tabs.
Delete the following from outbound:
1.RSRQST
Delete the following from inbound.
1.RSINFO
2.RSSEND
and save your partner profile.
3. now execute - RSA1, it will ask to active Workbench. Just activate it . it will work now.... Cheers.

Similar Messages

What's the problem with having multiple users with the same UID?

I've got three edit systems connected to the SAN using open directory off our server.
I want all edit systems to have read/write access to everything created. I don't need to protect anything from any of the systems. With all three systems logged on using the same user, I never have to change permissions.
The other cool thing about this is that Final Cut Pro will let me know if someone else is modifying a project that I have open with the warning:
“The project "projectName" has been modified externally. If another user is working on it, saving will overwrite their changes. Do you still want to save?”
This sounds great, right?
RED FLAG!!!! Apple gives the warning in this article:
http://docs.info.apple.com/article.html?artnum=302450
"You should not allow two users with the same UID to access an Xsan volume at the same time."
So why is it bad to have two (or more) users with the same UID?
I can see that in some situations it means that you can't prevent people from read/write privileges. But I don't want to restrict privileges.
What am I missing? With all of these warnings, it seems like if I do this my edit systems could all explode or something. Please help me understand the potential ramifications of having three users have the same UID.

Hi Russell,
1) If you have OD set up and "editor" has UID 1111, then when they log in to any machine that's bound to OD as editor, they will get UID 1111. Therefore, there won't be any of these permission errors. This is typically the recommended approach.
2) I assume you mean "You'd prefer to not using open directory?" Whatever the case, OD isn't mandatory with Xsan -- it's just that with multiple user accounts, managing them centrally tends to be easier. For 3 or 4 accounts and 3 or 4 machines maybe it's no big deal. If you go larger, it could get a lot more complicated. That said, if you set it up such that each machine has the exact same set of users (as you said, Mary = UID 502, Fred = UID 503, William = UID 504), then you can do what you want. Mary can log in from multiple machines at the same time, and in general you won't have permissions problems. Of course, if you try and read and write the same file from multiple workstations at the same time, you will get file locking issues, which will prohibit somebody from successfully writing the file.
File locking issues are different from general permissions errors. The former basically says "hey, someone else is editing this file. Therefore I won't let you edit it right now... you can read it if you want though." Permissions means somebody saves it, and Xsan thinks you saved it and own the file, when you really don't.
Quad-Core PMG5, 4 GB RAM, 7800 GT, 1 TB disk. Mac OS X (10.4.4)

Issue while installing TimesTen on the same machine as the Oracle DB.

Hi,
I am new to the TimesTen(TT) and facing the issue of installing TimesTen on the same machine as the Oracle DB(this is our project requirement ). I am trying to install on Solaris 32bit machine with 64GB RAM. When i installed only TT there is no issue. But I am not able to installed if I installed Oracle DB and after that I installed TimesTen on same machine.
Further if I tried to installed the TT with less size i.e.128MB along with oracle DB on same machine it installed successfully . But when i tried TimesTen with 16GB size it doesn't installed successfully along with oracle DB. Also, I tried to installed only TimesTen with size 16GB it installed without any error.
Could you please let me know what could be the possible reason for the above behavior.
Also i read in some threads in the same forum mentioning that "it is not recommend to installing TimesTen on the same machine as the Oracle DB as they can contend for resources (memory and CPU). Could you please elobrate more on this what kind of issues can possibly occur in this kind of scenario.
Please let me know in case more information is required.
Thanks in advance !!!
Regards,
Sanjay

Can you please explain what you mean by 'install' in this context? Memory size is not an installation time option with TimesTen. It sounds to me like you mean 'am not able to configure a TimesTen database to use xxx MB/GB of memory' rather than 'unable to install TimesTen'?
With a 32-bit operating system the largest TimesTen database you will be able to create is 2 GB. If you need a larger TimesTen database then you need to run 64-bit TimesTen on a 64-bit OS.
It general it really isn't a good idea to run TimesTen on the same machine as the Oracle database. Perhaps you can share what your overall objectives are? WHat are you looking to achieve by using TimesTen? If we understand that we can give better advice.
Chris

Are there any conflicts or problems having 2 browsers on the same computer using windows 7

I have no experience with having different browsers on the same computer and want to know if there are any conflicts or problems before I download a second browser.

There are no conflicts if you install multiple browsers to the same computer. You can do that just fine.

Cant login multiple network accounts on the same client?

Setup:
I have created a simple Lion Server on a new i7 Mac Mini. I have configured Open Directory in Master mode and have setup 4 user accounts. I have enabled the File Sharing service and checked the "Make available for home directories" option on the "Users" file share. I have configured each of the 4 user accounts to use this location as the home folder. I have connected my client machines (all OSX Lion) to the Network Account Server.
Problem:
I can log one user into the client machine, but when using "Fast User Switching" and logging on as the second user I get the following error:
"You are unable to log in to the user account "guestaccount" at this time. Loggin to the account failed because an error occured"
In the console if I search for that user account the related error message is:
11-07-31 12:30:54.993 PM authorizationhost: ERROR | -[HomeDirMounter mountNetworkHomeWithURL:attributes:dirPath:username:] | PremountHomeDirectoryWithAuthentication( url=afp://inntaserver01.local/Users, homedir=/Network/Servers/inntaserver01.local/Users/guestaccount, name=guestaccount ) returned 16
Any thoughts as to why the Home Folder "mounter" failed in this scenario?

Historically you have never been allowed to use Fast User Switching to log in multiple network logins on the same client machine. This certainly applied with Tiger, Leopard, and Snow Leopard. I have not yet personally tried this with Lion.
I believe that the underlying reason for this not being allowed is down to how AFP volumes are mounted. The AFP mount becomes 'owned' by the user that triggers the login. With a network login the first user becomes the owner and this means subsequent attempted network logins are denied access to that share and hence cannot access their home directories.
With Tiger, Leopard, and Snow Leopard servers, one could configure network home directories to be shared via NFS instead of AFP. NFS gets treated a lot different in terms of mounting, and is done more at a system level than a user level. While again I have not personally tried Fast User Switching with NFS shared home directories, this approach is specifically recommended by the authors of AquaConnect (a Macintosh Terminal Server solution) in order to allow multiple logins on the same Terminal Server. This seems to be for the same underlying reason. Using NFS does certainly work for use with AquaConnect and also works for the competing iRAPP Terminal Server product as well.
Unfortunately, Lion Server while it can be made to run an NFS server, will not let you configure using NFS for sharing home directories. I have actually reported this as a 'bug' in Lion server.
Neither the authors of AquaConnect or iRAPP have actually tested this scenario with Lion server yet, but AquaConnect do plan to investigate it. It could make it considerably more difficult to use their products.
So in summary, using NFS to share network home directories in theory would avoid the problem and can be done with a Tiger/Leopard/Snow Leopard server, but cannot be done with a Lion server. It is possible however to mix Lion with older server versions. This might for some people be a possible workaround.
PS. A bonus side-effect of using NFS shared home directories was that this allowed badly written software like Adobe's applications which are otherwise notorious for having major issues with network logins and home directories to work without errors. As an example Adobe Acrobat Pro introduced a bug in version 7.0 which prevented it being able to print-to-PDF (one of the major reasons to buy Acrobat Pro). It tooks two years for them to eventually fix this in Acrobat Pro 8.1 (I know because I spent that two years nagging them to fix it and was a beta tester). Unfortunately they then reintroduced the bug in Acrobat Pro 9.0. Fortunately I discovered this side-effect got round the issue although a clunkier workaround was also possible for Snow Leopard clients by redirecting certain folder paths.

Is SAP BI reporting is possible in ECC 6.0 with same client

Hi all,
                         My requirement is, we need to design SAP BI data flow in ECC 6.0 with same client only. Now I am designing the BI data models as per the requirement of SD sales reports in ECC 6.0.For this, when i was extracting the data from SD datasource(2lis_11_vahdr) in RSA3 its showing 0 records,actually as per VA01 some records are available but its not showing in the RSA3.
                          My doubt is , is it possible to extract the data from ECC 6.0 and load the data to the datatargets and get the SAP BI reports in ECC6.0 with the same client.
                          Please suggest as soon as possible.
Thanks

It is possible to load the data from the same client. It all depends on the source system and the client which has been connected in the RFC connection.
Let me know if this helps.
Regards,
Avinash

HR Authorisation Management for different companies in the same client

Hi,
Could anyone please help in this....
My client has two companies. They want to restrict the authorisation to both the companies so that no one can see each other companies data and at the same time access tha data.
For Eg, there are two payroll officers, each in both the companies, If i give authorisation to run Payroll driver(PC00_M40_CALC), anyone of them can run payroll for any of the companies. (though,their Payroll area is different). There are many restrictions to be maintained like Maintance of Master data, Maintanance of OM structure as assignement of position, running Payroll, viewing the payslip etc...
How can this all be restricted so that, the respective companies can view and access their own data without interfering in to the other company.
I could only find object P_PYEVRUN which helps me restrict to view the created documents of posting for other company code.
Can anyone put light on how i should proceed further... I heard we can restrict HR master data, but what all i know is we can restrict at infotype level. My problem is, two persons should access PA30(each from different companies), but should not be able to edit other companies data.
Thanks
--Pranitha

Hi ,
If you are creating the another company undar the same client . then you can not use different no. range.
or if you are going different client for different compnay code then you can use different number range for material master.
SAM

MM-SUS and EBP-SUS in the same client

Hi experts
I have a doubt about implementationMM-SUS and EBP-SUS in the same client, If I send a PO from MM to SUS and after send a PO from EBP to SUS to the same vendor, the vendor will be able to see 2 POs with just one logon?
As I know when I replicate a vendor from MM to SUS a Business partner is created and when I replicate a the same vendor from EBP to SUS a new Business partner is created and are diferent BP so a user and pass diferent .
Thanks
Nilson

Hi Nilson,
If i understand your scenario, you'll replicate an existing R/3 vendor to EBP. The vendor will be a direct vendor in R/3 while the same would be used as for Indirects in EBP.
Well, when you replicate the R/3 vendor to EBP, the vendor has the R/3 link in the form of Backend Logical systen name in EBP.
So when you replicate the vendor from R/3 or EBP, there will be ideally only one entry for the vendor with references to R/3 and EBP systems.
Hope this clarifies your question.
Cheers,
Akash

Extract data of a company within the same client.

Hi gurus. If I have more than one company configured in the same client in the ERP, Is there any way to extract data of only one of those companys in order to transfer or copy this information in other ERP?.
I've listened about TDMS but I'm looking for any procedure or tool that ensure that only the data of one company of multiples is extracted.
Thanks a lot!. Greetings from Colombia.

Hi,
Could you please clarify what all data you want to extract. Is it master data ?
Incase you want to extract master data to any external system you can you SAP standard IDOCs using ALE.
Also you can put a filter in the distribution model to filter the extract data only to relvant company codes.
Thanks
Neel

How to upload data from flat to ztables with in the same client by idocs

Hi Experts,
I have a requirement in IDOCS, I need to create a custom IDOC .I am working on IDES 4.6c. The reqirement is , there are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation server of the same client, which will updated in ztables by using idocs. For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
For this requirement how to approach (step by step) to accomplish.
Thanks in Advance.
Regards
J.S.Varma

Hi,
This is the procedure.
create segments using we31. don't forget to relaese it
create idoc using above segments using we30 don't forget to relaese it
create message type using we81
create function module to upload data using se37
maintain process code using we42
create partner profiles we20.
In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
Then update the database tables directly by insrt through other internal table in the same client itself.
Thanks
Manju

SO idoc from PO idoc within the same client

Hello SAP Gurus,
We need help with the following .
The requirement is we need to create the Sales order from Purchase order using idocs within the same client .
We created the partner profile of the customer and the vendor .
Customer ---maintained an inbound parameters with message type ORDERS and process code ORDE
Vendor -
maintained outbound parameters with message type ORDERS and idoc type ORDERS05 and process code ME10 .
Now when we create the PO and check the status in WE02 we get the error status 56 , EDI: Partner profile inbound not available.
What could be the posible cause of the error .
Anybody with some suggestions and solutions .
Thanks
Honey

Hi ,
You should maintain in the inbound parameters and out bound parameters also
out bound parametrs
message typ[e---ORDERS
receiver port----
basic type -
ORDERS05
tick on transfer idoc immediately
Inbound parameters
message type ---ORDERS
process code --ORDE
if you have any further clarifications let me know
Regards
Damu

How can I make the LabVIEW CGI write to the same client window twice?

I'm building a CGI VI using LabVIEW 6i and the Internet Dev. Toolkit. I would like this VI to write to the same client browser window twice. The first reply will just be a confirmation that the form has been submitted, and the second reply will be the results from a measurement. Is there any way this can be done? I have tried to use the "CGI Write Reply.vi" twice in the same CGI VI, but only the first reply is received in the client window.

Very nice interface! It sounds like you might want two separate steps and two separate CGIs (or one CGI with a "step" flag). Here's one idea:
1. Pass the configuration info from the form, initiate the measurement, and return a confirmation page to the user. Embed something in the result page (a hiddden variable on a second form, perhaps?) that will identify the measurement that was requested upon a subsequent CGI call.
2. Either have the second form/CGI automatically submit itself after time T, or else allow the user to submit it. Use the hidden variable to identify which results set is being requested. If the measurement is finished, return the results; otherwise, return another confirmation page with a new time estimate.
Best of luck,
Jo
hn

IDOC sender reciever as the same client !

Hi,
If I am using the same client as the sender and the receiver then shall i create the segment types and idoc types
and ztable again in the same client......?
Can i use same configuaration created for the rfc in SM59 for both sender and receiver ?
Please give me idea regarding this when it is to create the idoc with in one client... thnks

Hi,
Check this document for your reference:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d4ce58df-0901-0010-a4be-9ae9eda61107
cheers
Aveek

SLD: Pointing two business systems to the same client...

Hi Guys,
Is there anyway to make two business systems point to the same client(on the same r/3 technical system)? how about a work around?
Thanks,
Harsh

Harsh,
>>Finally all collapse to one client in production.
Even though you will have multiple Business Systems in every envrionment, the final transport will happen from only one environment.
DEV --> QA --> PROD. In this case, objects are moved from dev to qa and then from QA to prod and so, all you will need is the trasnport target created in the QA business systems pointing to the Prod busines system and do the transport.
>While transporting to a new SLD(quality to prod) can I choose one transport target for multiple source business systems?
Take a look at this document for multiple SLD transports. Should answer all doubts,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Bhavesh

Send IDoc to the same client

Hi:
How to send IDoc to the same client of the same system, e.g. for testing purpose? It seems I can't use the same logical system as both source and target in Distribution Model (SALE).
Please advise. Thanks

You wont be able to send it to same client. You can create/copy one more client assign logical system and try to perform your activity.

BD64 issue having ECC + BI on the same client

Similar Messages

Maybe you are looking for