BDB 5.2 Error message reported on std out

While testing with 5.2 (we are planning ro upgrade to 5.2) we see the following message reported on
the Screen -
EnvLOC /tmp/testDB/MYDB
/tmp/testDB/MYDB: DB_LOCK->lock_put: Lock is no longer valid
My application continues to run - i.e. does not get any errors.
My question - is this something I should be worried about. The message "Lock is no longer valid" seems to indicate there may be some consistency related issue.

Hi rittick,
I need more info on this issue:
1. What is the exact BDB version you are using (e.g. 5.2.19, 5.2.36)? On what platforms/OS?
2. Is this issue reproducible at will? Can you provide a small stand-alone test case program?
3. What is the access method of the database on which you are performing the operation (e.g. Btree, Recno)? What isolation degree flag are you using (e.g. DB_READ_COMMITTED, DB_READ_UNCOMMITTED)?
4. Are you acquiring and releasing locks explicitly by using the lock_get(), lock_put() or lock_vec() methods?
5. If you can reproduce it, put a breakpoint on the following line in db-5.2.PP/src/lock/lock.c:
          __db_errx(env, __db_lock_invalid, "DB_LOCK->lock_put");or simply put a breakpoint on the __db_errx function. Get the stack trace when the breakpoint is hit and dump the content of lock and lockp (i.e. in gdb do a print lock, print lockp).
Regards,
Andrei

Similar Messages

  • Re : Error Message reported on Exporting a ProjectPlan

    Hi,
    The following problem is endlessly appearing when I am attempting to backup a project plan from a workspace earmarked for backup. I have tried the following.
    Creating a new workspace and including all the plans and theron taking an export. This also fails.
    I am enclosing the error message reported. Can some one guide me to resolve this problem.
    SYSTEM ERROR: Workspace 'BACKUP' could not map ElementId: (-2,0,0)(64,0,68343)
    Class: qqsp_ImplementationException
    Error #: [1101, 736]
    Detected at: qqrp_Session::MapElmIdToInstanceId
    Last TOOL statement: method wsmgr.exportProject
    Error Time: Mon Nov 10 17:08:49
    Exception occurred (locally) on partition "Forte_cl0_Client", (partitionId
    = 9BF77B64-0A62-11D1-BD48-8BB2B251AA77:0x114a:0x1, taskId =
    [9BF77B64-0A62-11D1-BD48-8BB2B251AA77:0x114a:0x1.9]) in application
    "Forte_cl0", pid 40 on node BALA in environment centrale.
    Thanks in advance
    Bala

    Hi mate
    Yes, I know this error
    It appears because of usage not fully compatible disks
    I had the similar issue and could solve this using another DVD from another manufacturer.
    Check this it will help your too..

  • While updating my iphone 4 to 5 I'm getting an error message 'connection is timed out. please check your internet settings' whereas my connection is very much active. Any suggestions!

    While updating my iphone 4 to 5 I'm getting an error message 'connection is timed out. please check your internet settings' whereas my connection is very much active. Any suggestions!

    Check to see if you anti-virus software running, that will at times interfere with the connection with the Apple server.

  • HP Officejet Pro 8500 won't print yellow. No error message. Cartridge not out of ink.

    Printer won't print yellow. No error messages. Cartidge not out of ink, but did put in a new one and still won't print yellow.

    Ok SLU87...here are some steps you can take that should help with your Officejet Pro 8500 A909g not printing yellow:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01980797&tmp_task=solveCategory&cc=us&dlc=en&la...
    Let me know if it helps or not.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • I'm trying to sync my iPhone 5 and keep getting error message "Device is timed out", can anyone help me please?

    I'm trying to sync my iphone 5s with itunes and keep getting error message "Device is timed out", can anyone help me please?

    Try here first:
    iTunes: Error 13019 during sync
    Then here:
    Help Unknown Error 13019 (Updated)

  • WORD Error message -- Report from Template

    Hello everyone,
    I try to generate a "Report from Template" with transaction CG03.
    I can select the generation variant and the parameter values in the next two pop-ups.
    WORD is starting but then there is the error message:
    "Word cannot read this document. Maybe it is corrupted. Try the following:
    - open and repair the file
    - open file with repair-textconverter".
    This message is a translation from german to english so the correct messagt might differ from this.
    When I look at my frontend PC in the local settings I see that the respective files are written, but I can´t open them.
    This problem started two days ago out of nowwhere.
    Additional information: Visual Basic pops up after the error message is closed with "runtime error '1055'.
    A debugger is opened and this is the content of the window:
    Private Sub TmpDDE()
    Dim Template
    WordBasic.FileOpen "C:DOKUME1chgiLOKALE1TempRehsfil0.WWI"
    WordBasic.FileTemplates Template:="C:ProgrammeSAPFrontEndsapguiwwiwwi.dot"
    WordBasic.Call "wwiES.S", "S", ""
    End Sub
    Any ideas?
    Thank you in advance for your help!!!!
    Best regards,
    Christoph
    Edited by: Christoph Giehl on Nov 25, 2010 1:04 PM

    Hello Christoph
    any change happened on your client? New Windows version? New Word Version? New WWI Version installed? Did you manupulated Standad Dot path etc.? Did you change Standard.dot of Word?
    Can you open in cg54/cg50 any document (ready, released or historic) without a problem and the problem is related only to "report from template"?
    During WWI process a number of files are passed on to your client. Can you use Wordpad to open the files? I am not sure but I believe per WWI document there should be something like 4 or 5 documents in your local WWI path. One containing the data, one containing the template and some others (named something like resfil, lesfil etc.).
    An error like you described is normally related to one of the above mentioned changes. Can you use "Report from template "regarding the same spec, same genvariant same language with a different client without a problem => then it is clear you have a local problem
    With best regards
    C.B.

  • I cannot open my FinalCut pro X because of a problem with the FxFactory plugin, at least this is what the error message reports me. What should I do? Thank you very much

     

    What does the error message say exactly?
    Please contact tech support through the FxFactory application and explain your problem in as much detail as possible. 
    This will attach a FxFactory generated System profile to your message which can be very helpful in diagnosing problems on your system:
    1) Launch the FxFactory application
    2) Choose the "Contact Tech Support..." command under the Help menu.

  • Can't download software updates in iTunes - error message "network connection timed out"

    I'm unable to download software updates for my iTouch 4.1 in iTunes.  I have iTunes version 10.5, Windows 7.  i've tried numerous times in the past and always get the same error message.  I'm now experiencing problems with some of my apps. and I've attempted 4 times in the past 2 days to upload version 5.0. It goes thru the whole download (761.61 MB), says "processing file", then closes out and I get the following message:
    "There was a problem downloading the software for the iPod "xxxxx's iPod". The network connection timed out. Make sure your network settings are current and your network connection is active or try again later. Err = .3529." 
    I ran diagnostics and it said everything was fine. 
    Also not all the apps. on my iTouch are in my iTunes library even though I've synced my iTouch numerous times since I've purchased the apps. with my iTouch.  All the apps on my 2nd screen are on iTunes, but none of the apps. on my 3rd screen of my iTouch are in iTunes. 

    Did you check your security software settings? Troubleshooting security software issues
    iTunes has to be able to contact Apple during the download of the software and the update process.

  • Error message: Network connection timed out

    Go to download iOS5 on to my iPhone 4 and just as it was about to finish downloading, I get the error message. It's come up many times before when trying to update the phone, but I have just been ignoring it and not bothered with an update.
    Using latest version of iTunes
    Windows 7
    Hope someone can help me \:

    Did you check your security software settings? Troubleshooting security software issues
    iTunes has to be able to contact Apple during the download of the software and the update process.

  • I get an error message when I log out of my credit union site . What should I do?

    The error message said. Your browser won't let you log out.
    The error number is c8572041-ee50-4969-8b9c-136006ece943. Is there anything you can tell me to do?

    10.5 is too old for Mavericks.  You want the update from http://www.java.com/
    Java 7v52 is the latest Java.  

  • Idoc error message report

    To see most of the EDI IDOC errors, we need to go into additional log to check that, is there any report were we can get list of idoc errors in one go for the users
    Can any one tell me the tables which get updated when error shows up
    pls help
    vin

    The tables are EDIDC (IDoc control segment) and EDIDS (Status messages). From EDIDC you can select IDoc numbers that have errors (check STATUS field) and then link EDIDS by DOCNUM and STATUS (note that there might be multiple entries, you may use additional criteria to skip what you don't need).
    If you need the segment data then the table is EDID4 (or could be another number depending on the release).
    Hope this helps.

  • Error message Report

    Friends,
    I really need your help to remove the waring message.
    For the purpose of changing the description on the Selection screen from “Cost Cetnters (Authorised Values)” to “Funds Centers” I had changed the ZCCTRATI variable description to Funds Centers
    Issue:
    When we open the old report we see the following information message.
    " Value if variable ZCCTRAT1 is automatically converted
    Can u help me how to remove this ?
    Regards
    Mano

    Dinesh/Vijay,
      Thank you very much for your answers.But i looked in Surpress messages  , but i could not find this message there.If can can send u r e mail ,i can forward the screen print.
    Thanks a lot
    Regards
    Mano

  • Out of memory errors when reporting on checked out files

    My Dreamweaver CC version is up to date. I haven't been able to complete a report to find checked out files. I can see it running at a speed of about 2 files per second. We have a few thousand files on the web server, but I didn't have a problem with CS5.5. I can't understand why it takes so long to simply search for .LCK files. I can search for them using Agent Ransack in a matter of seconds. I've seen some other out of memory issues posted here too, so hopefully Adobe can get this fixed and release the next update soon.
    (I haven't seen any improvement in performance with the 64-bit re-engineering.)

    Hi AdobeJobie,
    We would like to investigate your case. If you have a purchased version of DW, send me your Adobe ID, location, and contact details (email, phone number) over a private message. Click my picture and use the message option.
    Thanks,
    Preran

  • I have Acrobat X Pro 10.0.3 running Windows Vista. I tried converting webpage to PDF but in less than a second I get an error message saying it timed out. How can I fix this?

    Error code: Timed out
    Error: Nothing done when trying to convert webpage to PDF using Acrobat X Pro 10.0.3

    Hi
    Please update to the latest version of Acrobat 10.1.13 and then try.
    Let us know if the issue still persists.
    Thanks
    Tanvi

  • Firefox won't load any websites but other browsers connect with no problem. error message: connection has timed out. deleting browsing history did not work.

    I also tries removing firefox and reinstalling it - still did not work.
    I checked - the firewall wasn't blocking firefox , so it's not that.
    As far as I could find my antivirus (AVG) also was not causing the problem.
    I'm at a complete loss - any ideas what has gone wrong?

    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''Network.'''
    Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
    Check the settings.
    Some problems occurs when your Internet security program was set
    to trust the previous version of Firefox, but no longer recognizes your
    updated version as trusted. Now how to fix the problem: To allow
    Firefox to connect to the Internet again;
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
    * Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
    '''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

Maybe you are looking for