Bdc and alv bock display
Can anybody help me with this query. since i am a beginner in abap.
this is my requirement
i have to do a recording using shdb(i have done that for xk01 t-code. i have given entries only for the mandatory fields).
then based on that i have to write a code to export data from a flat file on my desktop(presentation server).
i have done till this.
the next requirement is that i have to use alv block display to show a block to display the vendor name and all the records which were populated and success message if records are populated from flat file into the system.
else if i have errors then i have to show another bock containing the error messages. can anybody help me with that?
Edited by: kundan jha on Dec 26, 2007 4:27 PM
Hi Kundan,
You can do it in one way,
After you call the transaction , just check the return code, if the call success then maintain the table value as 0(success, or your own). and if it fails maintain it as 1.
After total records have been processed, then create an ALV report to show 1 records or 0 records.
Pavan
Similar Messages
-
Can anybody help me with this query. since i am a beginner in abap.
this is my requirement
i have to do a recording using shdb(i have done that for xk01 t-code. i have given entries only for the mandatory fields).
then based on that i have to write a code to export data from a flat file on my desktop(presentation server).
i have done till this.
the next requirement is that i have to use alv block display to show 2 blocks.in 1st block i have to display the vendor name and all the records which were populated and success message if records are successfully populated from flat file into the system.
in second block i have to print all the records which were not populated in the database and some error message.
can u help me with full code.Hy,
In your call transaction you can put the adition "messages into messtab". With this you will have all the messages of the transaction in a internal table. If there is a message of type E, A or X in that internal table, you can mark the transaction as ERROR.
You can also search for the message "vendor crated". With this you just have to put it in a ALV. There are many examples of alvs in SDN.
hope it helps -
What is the best way to learn BDC's and ALV's?
Hi,
For BDC,refer the following links.
http://sappoint.com/abap/
http://www.sapgenie.com/abap/bdc.htm
For BDC,if you record the data using SHDB and then changing the program apporpriately is better.
For ALV,refer the following links.
For follg., refer http://www.henrikfrank.dk/abapuk.html
http://www.sapdevelopment.co.uk/tips/tipshome.htm -
Manual Fieldcatalog and ALV list display.
Hi,
Could anyone help me to know the step by step procedure to create a fieldcatalog manually and then using it for ALV list display?
Thanks,
Sandeep.Hi Sandeep,
Refer this code :
FORM build_fieldcatlog USING p_it_fieldcat TYPE slis_t_fieldcat_alv.
DATA: itab_fieldcat TYPE slis_fieldcat_alv.
FOR LIGHTS
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '1'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'V_LIGHTS'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'It_matstock'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C410'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'Category'. " LONG TEXT FOR HEADER.
itab_fieldcat-seltext_m = 'Category'. " MEDIUM TEXT FOR HEADER.
itab_fieldcat-seltext_s = 'Category'. " SHORT TEXT FOR HEADER.
itab_fieldcat-outputlen = 7. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FOR CHECK BOX
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '2'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'V_CHKBOX'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'It_matstock'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C410'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'CHECKBOX'. " LONG TEXT FOR HEADER.
itab_fieldcat-seltext_m = 'CHKBOX'. " MEDIUM TEXT FOR HEADER.
itab_fieldcat-seltext_s = 'CHKBOX'. " SHORT TEXT FOR HEADER.
itab_fieldcat-checkbox = 'X'. " CHECK BOX
itab_fieldcat-edit = 'X'.
itab_fieldcat-outputlen = 2. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
*FOR MATERIAL NO (IT_MATSTOCK-MATNR)
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '3'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'MATNR'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'IT_MATSTOCK'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C410'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'MATERIAL NO'. " LONG TEXT FOR HEADER.
itab_fieldcat-seltext_m = 'MATNO'. " MEDIUM TEXT FOR HEADER.
itab_fieldcat-seltext_s = 'MATNO'. " SHORT TEXT FOR HEADER.
itab_fieldcat-hotspot = 'X'. " HOT SPOT
itab_fieldcat-outputlen = 20. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FOR PLANT (IT_MATSTOCK-WERKS)
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '4'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'WERKS'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'IT_MATSTOCK'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C510'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'PLANT'.
itab_fieldcat-seltext_m = 'PLANT'.
itab_fieldcat-seltext_s = 'PLANT'.
itab_fieldcat-outputlen = 10. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FOR STORAGE LOCATION (IT_MATSTOCK-LGORT)
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '5'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'LGORT'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'IT_MATSTOCK'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C610'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'STORAGE LOCATION'.
itab_fieldcat-seltext_m = 'STORAGE LOC'.
itab_fieldcat-seltext_s = 'SLOC'.
itab_fieldcat-outputlen = 10. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FOR QUANTITY (IT_MATSTOCK-LABST)
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '6'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'LABST'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'IT_MATSTOCK'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C710'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'QUANTITY'.
itab_fieldcat-seltext_m = 'QUANTITY'.
itab_fieldcat-seltext_s = 'QUAN'.
itab_fieldcat-outputlen = 10. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FOR UNIT OF MEASUREMENT (IT_MATSTOCK-MEINS)
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '7'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'MEINS'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'IT_MATSTOCK'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C110'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'UNIT OF MEASURE'.
itab_fieldcat-seltext_m = 'UNIT OF MSURE'.
itab_fieldcat-seltext_s = 'UOM'.
itab_fieldcat-outputlen = 10. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FORM alv_display_grid .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
i_structure_name = 'D_STRUCTURE'
I_BACKGROUND_ID = ' '
i_grid_title =
I_GRID_SETTINGS =
is_layout =
it_fieldcat = it_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = 'A'
is_variant =
IT_EVENTS = I_EVENTCAT
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_matstock
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " ALV_DISPLAY_GRID
Reward points if helpful.
Regards,
Hemant -
Differences between the alv's and alv grid dispaly
hi guys
.........please send the differences between the alv's and alv grid display.
thanks....Hi Midathala,
Plz go through the links might be useful to you.
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Thanks
Mohinder Singh Chauhan -
How to read green light from ALV list display during BDC
Hi,
I am currently writing a BDC on CK11 transaction, after the user enters all the data he has to check log for any errors. The log is shown using ALV LIST DISPLAY and the errors are identified by RED lights on ALV LIST DISPLAY. At this point in BDC i have to either save or exit depending the status lights shown on the screen.
Does anybody has any idea on how to read these lights from the screen ?
thanks
UdaiHi,
I agree with Rich here. Never seen this done before (and I'm pretty sure you can't do it), but if someone has a funky way of doing it please share!
Cheers,
Pat. -
I want to display some fields using the BDC and i want to know thruogh whic
I want to display some fields using the BDC and i want to know thruogh which transaction these fields are displayed.Could you please help me out.
You can use JFreeChart which is a free and good tool to generate graphs in Java. It has samples and other guides which you can use to get started...
-
Display totals on the first line in ALV grid and ALV LIST
Generally we wll display totals at the end..
bu the requirement is to display it in the first line of the column.
how to display the totals in the first line?
I have used ALV GRID and ALV LIST (choice) using function modules.
Plz help me
.for example : Po qty : Should display total po qty on the first line of the Po line item.IN LAYOUT
ILAYOUT-totals_before_items = 'X'.
REGARDS
SHIBA DUTTA -
DIfference between Reusable FM for ALV display and ALV display using class
Hi,
Is there any difference between alv display using Resuable FM and ALV display using classes except the later one uses OO concept.??
One mere thing i want to clarify is that is there any difference exist between REUSE_ALV_GRID_DISPLAY and REUSE_ALV_LIST_DISPLAY? If so, then let me know.
It could be easier to understand me if yuo give scenario where these FM comes into picture
Regards,
ParagHi,
(1) REUSE_ALV_LIST_DISPLAY
Display an ALV list as per parameters defined in the function call
(2) REUSE_ALV_GRID_DISPLAY
Display an ALV grid as per parameters defined in the function call
(3) REUSE_ALV_COMMENTARY_WRITE
List header information is output according to its type. The output information is put in an internal table. Output attributes are assigned to each line via the TYP field.This module outputs formatted simple header information at TOP-OF-PAGE.
(4) REUSE_ALV_HIERSEQ_LIST_DISPLAY
This module outputs two internal tables as a formated hierarchical-sequential list.
(5) REUSE_ALV_VARIANT_F4
Display variant selection dialog box.
(6) REUSE_ALV_VARIANT_EXISTENCE
Checks whether a display variant exists.
Other Useful Link :
Customize ALV grid layout at run time
Download ALV grid Control Tutorial
Understand ALV report ( Just Copy and paste )
Dynamic selection on ALV at run time
Dynamic selection on ALV at run time
Regards
Kiran -
Kindly help to develop alv grid display
Hi ,
I have a requirement in which I need to display ALV GRID display and in its tool bar 4 butons are required. In the same view down to alv display i want to develop a tabstrip and its functionalities.I have designed classic alv using SALV_WD_TABLE component. I want a good GRID Display, not like flat field names that comes in list display, looking for bulged fields(like what comes for ALV GRID in normal abap) display with print version etc hidden and buttons at the top of ALV. Kindly help
Highly rewarded
Kindly help
Regards,
Lakshmi
Edited by: Lakshmi Menon on Nov 27, 2008 4:49 PMWell Web Dynpro is generally output in HTML so the output formatting is never going to quite look like a desktop application (which is the case with the ALV Grid). You have very little control over the look of the column headers. In fact you can only manipulate what is available via the Portal Theme.
There is a new Tradeshow Plus theme available in NetWeaver 7.01 which uses a gradiant background for the column headers. This gives them a little more depth:
http://www.flickr.com/photos/tjung/3068850120/
The other option is next year when NetWeaver Business Client version 3.0 comes out, you will be able to render Web Dynpro applications using the NWBC Smart Client Rendering. This will render Web Dynpro applications using desktop libraries instead of HTML/Browser. This gives Web Dynpro a more SAPGUI/Desktop appears of course.
http://www.flickr.com/photos/tjung/2685619882/in/set-72157606418550143/ -
Hide delete option is not working in ALV List Display- urgent
Hi All,
In my program i am displaying the output by using alv list display. after displaying the data i am displaying my own pf status here. in this i have few pushbuttons like
selest all, deselect all, hide . first two options are working fine. when i click hide button selected records are going to be hide.but this is not happening in my program. any body cam send me the code plz.
i am sending my code below. if possible please modify and resend the code asap.
my code:
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
*data : box,
input(1) type c,
data : checkbox type c,
flag type c,
end of it_secobjects.
data : wa_ita like line of it_secobjects.
*data : it_secobjects like zuser_secobjects occurs 0 with header line.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
*DATA : it_filt type slis_t_filter_alv with header line.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
when 'HIDE_DEL'.
rs_selfield-exit = 'X'.
it_filt-fieldname = 'CHECKBOX'.
it_filt-tabname = '1'.
it_filt-valuf = 'X'.
it_filt-intlen = '1'.
it_filt-inttype = 'C'.
it_filt-datatype = 'CHAR'.
it_filt-valuf_int = 'X'.
it_filt-sign0 = 'E'.
it_filt-optio = 'EQ'.
if it_filt[] is initial.
append it_filt.
else.
modify it_filt index 1.
endif.
perform display using i_object.
PERForm ALV_LIST_DISPLAY.
WHEN 'SHOW_DEL'.
rs_selfield-exit = 'X'.
free it_filt.
PERForm ALV_LIST_DISPLAY.
when 'SAVE1'.
select * from zuser_secobjects where
appln = zuser_secobjects-appln
and appln_partner = zuser_secobjects-appln_partner
and partner_type = zuser_secobjects-partner_type
and start_date = zuser_secobjects-start_date
and end_date = zuser_secobjects-end_date.
endselect.
if sy-subrc eq 0.
message e000(ZV) with 'Duplicate Entry'.
endif.
endcase.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'CHECKBOX'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.tHi,
What do you mean by Hiding the records.
Deleting completely from the screen.
You can just delete the records from the internal table and pass to field catalog before displaying again.
or serach in the slis structrue for hiding the contents of the output.
reward if useful
regards,
Anji -
Issue in ALV List display
Posted: Apr 5, 2008 10:25 AM Edit E-mail this message Reply
Hi Friends,
Can any one help me out in the logic to display the output in the ALV list.
i want to get the out put as
based on the field4 i have to display fieds5, field6 and field 7 values as mentioned below.
field1 field2 field3 field4 field5 field6 field7
0L 123 456 2008 001 123.00 456.00
- - - - 002 213.00 789.00
- - - 003 0.00 0.00
- - - 004 0.00 0.00
- - - 005 0.00 0.00
- - - 006 0.00 0.00
336.00 1245.00
Thanks,
Vijayfor display you have to define fieldcatlaog and use Fm RESUE_ALV_GRID_DISPLAY,
Go through this program
*& Report Z_OPEN_CLOSE *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
MSEG, " Material Document: Item Data
MARA,
MARD,
S031,
EKKO,
EKPO,
LIKP,
MAKT,
J_1IWRKCUS,
T001W,
WB2_V_MKPF_MSEG2,
MMIM_REP_PRINT,
YW2_STKMOVEMENTS,
YPLNT,
MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
PPLNT LIKE YPLNT-PPLNT,
WPLNT LIKE YPLNT-WPLNT,
END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
VGART LIKE MKPF-VGART,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
KUNNR LIKE MSEG-KUNNR,
ZEILE LIKE MSEG-ZEILE,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
MATNR1 LIKE MSEG-MATNR,
END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
WERKS LIKE MARDH-WERKS,
MEINS LIKE MARA-MEINS,
MATNR LIKE MARDH-MATNR,
LGORT LIKE MARDH-LGORT,
LABST LIKE MARDH-LABST,
LFGJA LIKE MARDH-LFGJA, "Added -MB
LFMON LIKE MARDH-LFMON, "Added -MB
PERIO(6),
INSME LIKE MARDH-LABST,
EINME LIKE MARDH-LABST,
SPEME LIKE MARDH-LABST,
RETME LIKE MARDH-LABST,
O_STK LIKE MARDH-LABST, " Opening Stock
C_STK LIKE MARDH-LABST, " Closing Stock
END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
WERKS LIKE MARD-WERKS,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
INSME LIKE MARD-LABST,
MEINS LIKE MARA-MEINS,
EINME LIKE MARD-LABST,
SPEME LIKE MARD-LABST,
RETME LIKE MARD-LABST,
END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
LGORT LIKE MSEG-LGORT, " Storage Location
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TLOSS LIKE MARDH-LABST, " Total Loss
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
C_STK LIKE MARDH-LABST, " Closing Stock
TRFSTK LIKE MARDH-LABST, "Transfer stock
MENGE LIKE MSEG-MENGE,
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
MTART LIKE MARA-MTART, " Material Type
MAKTX LIKE MAKT-MAKTX, " Description
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MEINS LIKE MARA-MEINS,
LABST TYPE MARD-LABST,
MAKTX LIKE MAKT-MAKTX,
END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
BWART LIKE MSEG-BWART,
SHKZG LIKE MSEG-SHKZG,
VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
MONTH(8) ,
END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
KEY WITH HEADER LINE INITIAL SIZE 0,
G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
MON(2),
FYEAR1(4),
MON1(2),
OBAL LIKE MARD-LABST,
CBAL LIKE MARD-LABST,
INDEX TYPE I,
COUNT,
COUNT1 TYPE I,
O_STK TYPE P DECIMALS 3,
C_STK TYPE P DECIMALS 3,
V_MJAHR LIKE MKPF-MJAHR,
MONTHS TYPE TRFF_TYPE_DEC_6_5,
MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
ALV_VARIANT LIKE DISVARIANT,
ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
ALV_REPID LIKE SY-REPID,
ALV_PRINT TYPE SLIS_PRINT_ALV,
ALV_DETAIL_FUNC(30),
ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
S_MBLNR FOR MKPF-MBLNR,
S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
M1 RADIOBUTTON GROUP P1,
Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
IF S_BUDAT-HIGH IS INITIAL.
S_BUDAT-HIGH = S_BUDAT-LOW.
MODIFY S_BUDAT.
ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = IDATE-LOW
I_DATE_TO = IDATE-HIGH
IMPORTING
E_DAYS =
E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
R_BUDAT-LOW = S_BUDAT-LOW.
APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
I = I + 1.
R_BUDAT-LOW+6(2) = '01'.
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = R_BUDAT-LOW
IMPORTING
LAST_DAY_OF_MONTH = R_BUDAT-HIGH
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
R_BUDAT-LOW = S_BUDAT-LOW.
MODIFY R_BUDAT.
ENDIF.
IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
R_BUDAT-HIGH = S_BUDAT-HIGH.
MODIFY R_BUDAT.
ENDIF.
For Summary on 26.4.05.
IF Y1 = 'X'.
CLEAR R_BUDAT.
REFRESH R_BUDAT.
R_BUDAT-LOW = S_BUDAT-LOW.
R_BUDAT-HIGH = S_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR R_BUDAT.
ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
MON1 = MON.
FYEAR1 = FYEAR.
MON = '12'.
FYEAR = FYEAR - 1.
ELSE.
MON1 = MON.
FYEAR1 = FYEAR.
MON = MON - 1.
FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
IF Y1 = 'X'.
LOOP AT S_BUDAT.
S_BUDAT1-SIGN = 'I'.
S_BUDAT1-OPTION = 'NB'.
S_BUDAT1-LOW = S_BUDAT-LOW.
S_BUDAT1-HIGH = S_BUDAT-HIGH.
APPEND S_BUDAT1.
CLEAR S_BUDAT1.
ENDLOOP.
ENDIF.
IMKPFT[] = I_MKPF[].
IMKPFT2[] = I_MKPF[].
IMARDT[] = I_MARD[].
IMARDHT[] = I_MARDH[].
PERFORM MONTH_WISE.
PERFORM PROCESS_MOVEMENTS.
PERFORM CALCULATE_OPENING_STOCK.
PERFORM UPDATE_NON_TRANSACTION_ITMS.
PERFORM DELETE_EMPTY_RECORDS.
CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
MF_MONAT LIKE ISELLIST-MONTH,
MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07.
IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
MF_HLP_REPID = 'SAPLALDB'.
ELSE.
READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
EXIT.
ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
EXPORTING
INPUT = MF_DYNPFIELDS-FIELDVALUE
IMPORTING
OUTPUT = MF_MONAT
EXCEPTIONS
ERROR_MESSAGE = 1.
IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
MF_MONAT = SY-DATLO(6).
ENDIF.
CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
EXPORTING
ACTUAL_MONTH = MF_MONAT
IMPORTING
SELECTED_MONTH = MF_MONAT
RETURN_CODE = MF_RETURNCODE
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 01
HOLIDAY_CALENDAR_NOT_FOUND = 02
MONTH_NOT_FOUND = 03.
IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
INPUT = MF_MONAT
IMPORTING
OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
COLLECT MF_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07. "<<== note 148804
ENDIF.
ENDIF.
ENDFORM. "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR S_BUDAT.
REFRESH S_BUDAT.
S_BUDAT-SIGN = 'I'.
S_BUDAT-OPTION = 'BT'.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
APPEND S_BUDAT.
ELSE.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
MESSAGE I041 WITH TEXT-005.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
CLEAR S_BUDAT.
LOOP AT S_BUDAT.
CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
S_BUDAT-LOW+0(4) INTO LOW.
CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
S_BUDAT-HIGH+0(4) INTO HIGH.
CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
FHEADER-TYP = 'H'.
FHEADER-INFO = V_FIN1.
APPEND FHEADER.
CLEAR FHEADER.
ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_TOPOFPAGE'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_USER_COMMAND'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT. -
Folder in alv grid display report
Hi Experts,
I have a requirement to generate the folder in alv grid display, to display the multiple line items where ever we have.
Actually I am displaying the material details and production order details.
If the material is having the multiple production order details , in that case we need to place all the production order details in one folder, and if you open that folder arrow, we have to display the production order details.
I am using REUSE_ALV_GRID_DISPLAY function module to develope this application. Here Hierseq list is recommended to use for this application, why because folder option is already available in grid display. that we can observe in CL6AN.
Is it possible to implement it through function modules or through OOABAP.
Actually, I have to generate the report which we can see in CL6AN Transaction code,,
Your valuable suggestions surely will attract the benifits.
Thanks in advance.
Ramesh.Hi ramesh,
Hierseq list is not supported in the grid display. You could do this using an OO tree display but this could be rather complicated. What about displaying one field per material line with the number of production orders. At double-click on that field, open a second grid display (possibly as popup) to show the production order details.
Regards,
Clemens -
hi
i want know what is the difference between BDC and LSMW and which is best also tell me BDC and LSMW using for which type data (like master or transactional data)
thanka in advance
deepakHi deepak,
LSMW and BDC are vastly different.
BDC (Batch Data Communication) is a technology used for data transfer. it is meant for transferring data thru SAP transactions itself. when u use BDC for data transfer, the sequence of steps is the same as when u use standard sap transaction screens for data upload. the only difference is that u can use different options for foreground/background processing.
LSMW on the other hand is a tool that helps migrate data from a legacy system (non-sap system ) to SAP system. it offers u various options to use either batch input, direct input, BAPIs or idocs. it involves a series of some 17-18 steps to migrate data.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
LSMW:
The LSM Workbench is an R/3-based tool that supports You when transferring data from non-SAP systems ("Legacy Systems") to R/3 once or periodically.
The tool supports conversion of data of the legacy system in a convenient way. The data can then be imported into the R/3 system via batch input, direct input, BAPIs or IDocs.
Furthermore, the LSM Workbench provides a recording function that allows to generate a "data migration object" in an entry or change transaction.
The main advantages of the LSM Workbench:
Part of R/3 and thus independent of individual platforms
A variety of technical possibilities of data conversion:
Data consistency due to standard import techniques:
Batch input
Direct input
BAPIs (Business Application Programming Interfaces)
IDocs (Intermediate Documents)
The import technique to be used in an individual case depends on the business object.
Generation of the conversion program on the basis of defined rules
Clear interactive process guide
Interface for data in spreadsheet format
Creation of data migration objects on the basis of recorded transactions
Charge-free for SAP customers and SAP partners
http://help.sap.com/saphelp_nw04s/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/content.htm
http://www.sap-img.com/sap-data-migration.htm
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
http://allsaplinks.com/lsmw.html
http://myweb.dal.ca/hchinni/sap/lsmw_home.htm -
Total count to be displayed in subtotal ALV(GRID Display)
Hello ,
I want to display total count in subtotal.
720 Mr JORGE 522,06
720 Mr JORGE 566,23
720 Mr JORGE 100,33
720 Mr JORGE 123,33
720 Mr JORGE 332,22
subtotal -> 720 1644.2 Count 5
888 Ms Mariam 100,00
subtotal -> 888 100,00 Count 1
Is this possible? Plz dont post same answers how to display subtotal. I am able to display subtotal , only issue is to display with count.
Edited by: Vimalnair on Aug 19, 2009 9:37 AMHi,
You cannot have subtotal for particular number of rows of ALV,
but if you want to get the total number of rows of the ALV data display
you can describe your final internal table from which the data is
getting displayed in ALV output and get it displayed in the header
or footer area of the ALV output.
For Eg:
DATA V_LINES TYPE I.
DESCRIBE TABLE IT_FINAL LINES V_LINES.
DATA: it_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
i_callback_pf_status_set = 'PF_STATUS'
i_callback_user_command = 'COMM'
i_callback_top_of_page = 'TOP' "This top will call the subroutine namely TOP
FORM top.
REFRESH it_header.
wa_header-typ = 'S'.
wa_header-key = text-001.
wa_header-info = sy-repid.
APPEND wa_header TO it_header.
CLEAR wa_header.
wa_header-typ = 'S'.
wa_header-key = text-002.
wa_header-info = sy-uname.
APPEND wa_header TO it_header.
CLEAR wa_header.
wa_header-typ = 'S'.
wa_header-key = text-003.
wa_header-info = V_LINES. "This will print the total number of lines in the header
APPEND wa_header TO it_header.
CLEAR wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_header
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "TOP
Hope it helps
Regards
Mansi
Maybe you are looking for
-
Cannot connect to iTunes store
I can no longer connect to the iTunes store. I have windows xp, and i just downloaded the latest iTunes update.
-
Not able to create new domian name while sign up
Hi All, I am unable to create new domain name with the name of as I want . Kindly let me know how can I do this. Below is the error which occurs while user creation. Please help me out I need to implement Windows Intune in my organization. Thanks Sha
-
I have recently downloaded the jdeveloper from the oracle site . I want to know how to use it . We are using oracle9i as DB in m/c with IP 192.168.2.7 and oracle 10g in app server with IP 192.168.2.5 The servers are loaded with Linux Opr system. I wa
-
Can i trade in my old imac air when i am buying new iMac air???
can i trade in my old imac air when i am buying new iMac air??? cause the one that i got is 11inch, but it kinds of too small..so i thinking to buy the new one..
-
Hi, I need to schedule a job which calls unix script from the server. Can we use DBA scheduler, if yes, how should we go about it? Could anybody please suggest anything on this? Any help is appreciated. Thanks, Neha