BDC CA01 Group value always empty

Hi All,
I have written bdc for CA01, in this group should be always empty.
For the first material is empty but for the second material on wards its taking the group which is generated by the first material.Due to this group counter is incrementing , which should be one for all the materials.
Thanks in advance.
ALI.

Hy Syed,
Pass spaces as a value to this field and do the bdc.
In the routine wher you populate the bdc_data, check if you are checking for initialness of the fields.
Remove that check.
Regards,
Ravi

Similar Messages

"Open recent..." menu always empty

Hi,
since i run Mac OS X Leopard the File > "Open recent..." menu is always empty although i have set the number of Recent items to 15 in System Preferences.
I thought this could be due to permission problems but Disk Utility claims that everything is alright.
I highly appreciate any ideas to solve this, because this is really annoying.
Thanks

IIRC, you have to set that within each application, using this Terminal command:
*defaults write com.XXXX."name of app" NSRecentDocumentsLimit YYY*
where XXX = company, "name of app" = self explanatory, and YYY is the desired integer value. E.g., for TextEdit, I used:
*defaults write com.apple.textedit NSRecentDocumentsLimit 30*
Relaunching TextEdit and you'll see File->Open Recent->shows last 30 opened documents.

Getting error Data record has grouping value "" in

Trying to change Address data in HR using BAPI_ADDRESSEMPUS_CHANGE
Getting error message : Data record has grouping value "" instead of ""
Please advise.
Thanks,
Bhaskar

Hi,
I assume the following system situation exists:
The new Infotypeframework NITF is inactive for PA30. Flag CCURE PC UI is activated in T77SO. You are using ESS based on Web Dynpro which uses the new Infotypeframework.
Here we have to differentiate between infotypes which are participating in the data sharing functionality and all other infotypes. Such as:
Infotypes without Data Sharing:
          - Infotype checks     => module pool
          - Infotype update     => SAPFP50P/SAPUP50R
Infotypes with Data Sharing:
          - Infotype checks     => module pool
          - Infotype update     => NITF
ATTENTION:
BAdI HRPAD00INFTY is not processed in this case (importing parameter NEW_IMAGE is always space). Instead the BAdI HRPAD00INFTYDB of the NITF is been processed.
The following notes (1 and 2) will solve the problem. Note 3) solves an involving problem caused during the deletion process of a personnel number.
1) 783499 - Incorrect framework synchronization
2) 845592 - Incorrect framework synchronization - Retroactive accounting
3) 844998 - PU00: Termination when deleting a personnel number
Hope this will help!
Regards,
Sibylle

BBP_CUF_BADI2~MODIFY_OUTPUT IS_HEADER always empty

Dear Experts,
After adding new customer fields to basic data tab , we need to populate these fields with some data from the SC that is in process.
But the LS_HEADER parameter is always empty so how to get the values for this SC ?
Thanks,
Anubhav

Dear Experts,
After adding new customer fields to basic data tab , we need to populate these fields with some data from the SC that is in process.
But the LS_HEADER parameter is always empty so how to get the values for this SC ?
Thanks,
Anubhav

DSCP (Differentiated Services Code Point) value always set to '0' for outgoing packet on win 7

DSCP (Differentiated Services Code Point)
value always set to ‘0’ for outgoing packet on win 7
I have setup – Controller (Win 7) and Responder (Win XP)
In controller I setup DSCP value to something – ‘50’ (in hex 0x32) and perform RTP call
Then I sniff packets using ‘Wireshark’ where I found DSCP value from Controller to Responder not able to set but which is able to set in packet from Responder to Controller.
Controller to Responder
Responder to Controller
When I run same application under same network, where Controller and Responder are having Win XP, then DSCP value appear in layer 3 protocol.
When I googled then learned I need to do some registry changes mentioned in below links -
http://technet.microsoft.com/en-us/library/cc758910(WS.10).aspx
http://support.microsoft.com/kb/2733528/en-us
But this solution did not help to resolve my problem.
Later I did followed changed in Local Group Policy Editor but which was also fruitless.
I do not want to set some fix DSCP value for all outgoing traffic, as my application has provision to take an input for DSCP value from user.
http://technet.microsoft.com/en-us/library/cc771283.aspx

Hi,
I'll involved another engineer who had more knowledge with your problem. Thanks for your understanding.
Roger Lu
TechNet Community Support

Apple told me that my iPhone 4 does not have the possibility to store sent e-mails. I can not believe that, but my iPhone has a box for sent mails that is always empty. How can my iPhone store sent e-mails?

The Apple helpdesk told me that my iPhone 4 does not have the function to keep sent mails stored. I cannot believe that. My iPhone 4 has a Sent box, I have checked the Sent box in Configuratieo--> E-mail, ...Calender..,but the Sent box is always empty after I have sent an E-mail. I know that the E-mails arrive at their destinations. How can I activate the Sent box?

lol the person you talked to at Apple was not very bright.
Of course you can have sent items in your mail on the iPhone 4. I have mine there all the time.
Sounds like you might have issues with the software.
I recommend trying a reset, send email and see if that goes to the sent items directory
If not do a restore.
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414

Subreport data use to group Values in Main Report

Hello,
I create a Subreport in my header to calculate values, the formula is based on a specific sorting and comparison of previous values.
In my main report I need to Group my values depending on the result. Because the group I will made on the Main Report can't be the same sorting of the SubReport.
SUB-REPORT
1 Paris (result "Capital")
2 Lille (result "Same Country of Paris")
3 Lyon (result "Same Country of Paris")
4 London (result "Capital")
5 Manchester ("Same Country of London")
MAIN-REPORT
Group
- CAPITAL (Paris, London)
- Same Country of London (Manchester)
- Same Country of Paris (Lille, Lyon)
My issue, is that I don't know how to group values on MainReport based on a formula Result of the SubReport
OR, may be there is a way to search on value in the sub-report ?

You can't use a shared variable to group on from a sub report in the main report since a shared variable evaluation time is done whileprintingrecords.
Try using a SQL expression to return the same result as the subreport would. You can then group on the SQL expression
Edited by: Zilla Eh on Jan 15, 2009 6:39 PM

Creative Cloud is always empty and I cannot update LR and PS and cannot open RAW files from my new camera!

My Creative Cloud is always empty. I've had this trouble for over a year. I cannot update Lightroom because of it and Photoshop does not update properly. I cannot open the RAW files from my new camera, a Nikon D750. Each time I want to update, I have to talk to you and delete things and reinstall things but it doesn't fix it properly!
I have contacted Adobe before and always have to go through a tedious delete stuff and reinstall, then next time it happens all over again.
I'm really fed up with it and want to know how to fix it properly. I am in the UK, if that makes any difference.

This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Status list based on status lists.../ Indicator values always 0

Hi, any help or thoughts would be appreciated.
Basically what I'm doing is calculating status list values based on data in excel sheets. This seems to work as expected. I'll call these sub-status lists from now on.
The next thing I wanted to do is have an "overview" status list that basically gives the status of each sub-status list. If there are any indicators in one of the sub-status lists that haven't met their goal (currently yellow or red), I want the
indicator corresponding to that sub-status list in the overview status list to show as red.
I've tried creating a new column in the sub-status lists called 'goal met' that is a calculated column using the formula
=IF([Lower values are better],IF([Indicator Value]<=[Indicator Goal Threshold],1,0),IF([Indicator Value]>=[Indicator Goal Threshold],1,0))
However, the only way to get this to work is setting the Goal Thresholds to 0, since that is what the Indicator Values always seem to return (despite them displaying non-zero values when I view the list manually).
Am I going about this incorrectly, or is there a different (and free) way to accomplish my goal of having an overview status list?
Thanks,
Chris

So when a status list indicator is set to update automatically, its indicator value is not stored, and it seems like the only way to see it/your current status is to view the list or use a status list web part to do so for you. Setting the indicators to
update manually made the indicator values be stored, so I was able to base another status list off of these values.

Group values on Barchart - Please help Urgent

Hi
I am plotting a bar chart.
I am plotting chart "on change of" first group name.and showing 3 values which i get in formulas.
I had to place these formulas in lowest level of subgroup just above the details ( i don`t need any details).
i am getting all the values properly.
But it is plotting the graph with group A values as group B values.
In other words,
on starting group all the 3 values will be zeros.By the end of this group (after details) i will get 3 values.
I want to plot chart with these values as starting group values.
But as took "on change of" group name it is plotting zeros initially and the result of group A as the result of Group B and so on.
Please help me how can i plot chart after a group is evaluated.
I placed my chart in report header
Please help me .
Haima.

Hi
I am using bar Chart ( side by side bar chart).
This time i would like to explain in more detailed.Please find my layout and preview as pictures in the following links.
[http://i34.tinypic.com/2wc48w9.jpg]
[http://i33.tinypic.com/2603ern.jpg]
I want show msx3 in the bar chart .so first i initialized it to zero and counted all the records which suits my criteria and showing the same value in the bar against that group.( i am explaining with one formula msx3 only..anyway remaining are similar).
This value is initially zero and will give a count number at the end of this Group #1 Name ( plz see pictures).
My problem is i have take "On change of" Group# 1 Name in the data of chart expert and showing the formulas ( with don`t Summarize option checked).
It is giving me the result properly but plotting the values of first iteration ( when the first time the group is evaluated) ans result of second iteration.I understand this is because of "on change of " option ,when it is plotting all the values will be zeros.
I have to plot the chart with values after evaluating the group #1 but not before evaluating it.
Please give me any idea over it.I am not an expert and it is urgent.
Please help.
Thanks,
Haima

XMLP5.6.2 - template LOV under Layout definition is always empty !

hi,
I installed XML Publisher 5.6.2 + XML Publisher destop.
I created a RTF template with MS WORD.
I try to create a new Report (following the differents steps described by User Guide). Under Layout node, I uploaded the RTF template I created with MS WORD then I tried to create a new layout. But, the LOV "General setting -> template" is always empty !!
I don't understand what I did wrong.
This is my very first use of XML Publisher. I have to evaluate the possibility of the product for one of my client.
Can you help me?
Thanks in advance,
Cyryl

SOLVED - it's my mistake.
I did not have undertstand that I had to create the RTF template BEFORE the report !
Cyryl

How to remove target node if source field value is empty SAP PI Mapping

Hello,
how to remove target node if source field value is empty in graphical Mapping.
Like if
MIddle name in source filed is empty, I would like to eliminate target field from out put XML.
Thank you
John

Hi Jhon,
If you want to remove all empty tags and you dont to complicate your message mapping, you can use a XSL, after the message mapping, to remove all the empty tags:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <xsl:template match="node()|@*">
        <xsl:copy>
            <xsl:apply-templates select="node()|@*"/>
        </xsl:copy>
    </xsl:template>
    <xsl:template match="*[not(@*|*|comment()|processing-instruction())
     and normalize-space()='' ]"/>
</xsl:stylesheet>
Regards

What is the library section in the bookmarks toolbar used for now. I used to be able to organize my bookmarks here now the left pane in library under organize bookmarks is always empty.

Used to be able to organize bookmarks in the library section (left pane) but since upgrade this pane is always empty even if i try to add a folder or bookmark. Is there another way to organize without having to do this in the library section.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

How to avoid the presence of element in the Destination file if the value is empty

Hi,
I am using a map, in which Source is an XML File, Destination is a FlatFile
For Eg:
Input File
<Name>
FirstName>aaa</FirstName>
<LastName>bbb</LastName>
</Name>
Output File
FirstName     LastName
aaa                bbb
Destination Schema is also the same, but if the Last name value is empty, the LastName element should not be present in the Destination Flat File.
Eg:
Input File
<Name>
FirstName>aaa</FirstName>
<LastName></LastName>
</Name>
OutputFile should be
FirstName
aaa
Please help in making this requirment....
Regards, Vignesh S

Set the “Min Occurs” property of the LastName header element in the flat-file schema to “0” (Zero)
Create a map which maps the Schema for the XML file to the flat-file schema.
In the map, use the Logical Existence and Value mapping as shown in the below image. Here Logical
Existence function is used to check the existence of the field LastName in the input XML. If LastName element exist, then using the Value mapping functiod, map the Contant-LastName  (this
would be the header). Below image shall help you with thisexplanation.
As you can see, for the detail record, the value is mapped directly and for the header, as per you requirement a check has been made to for the existence of the LastName
field in the XML to populate the LastName header node. If LastName is empty in the XML, header LastName would not be populated.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

After downloading a file, the downloads window pops up, but is always empty. the downloaded files are not visible.

After downloading a file, the Downloads window pops up but it is always empty. The files downloaded are not visible on this window. In order to access them, they must be sought out via windows explorer. Any ideas? Thanks.

Be sure Options > Privacy > "Remember download history" is checked.
*[https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
If you want to retain download history, do not clear Download History when using Clear Recent History or "Clear history when Firefox closes" > Settings
*[https://support.mozilla.com/en-US/kb/Clear%20Recent%20History Clear Recent History]
*Clear history when Firefox closes: [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

BDC CA01 Group value always empty

Similar Messages

Maybe you are looking for