BDC FOR F-58 - BKPF-BLART NOT FOUND ON DYNPRO

Hi everyone,
I am doing the bdc for tcode F-58 based on the parameters given by SM35. When I run it with the program, it suddenly stops showing the error message, "Field BKPF-BLART not found on dynpro sapmf05a 0129". I need to set the bkpf-blart field to a specific one (electronic payment) but it seems bdc doesn't allowed me to do such a change. do you know how does this happens or how can it be solve, or where can i take a look ?
Thanks on any advice.
Silvia

BKPF-BLART is very much there on the specified screen SAPMF05A 0129.
although quite a few FI transactions behave differently when run normally compared to when a recording is done on them, i don't think this transaction will fall in that category (especially this field). check your code once again.
rgds,
PJ

Similar Messages

Error "No automatic updation for IT0008. Allowance Grouping not found"

I am maintaining IT581 of an employee.but system throws an error -->No automatic updation for IT0008. Allowance Grouping not found.I have maintained allowance grouping properly.The thing is my requirement is that i am maintening pay groups and level in table T710 instead of T510.Not touched T510.
Means i have also created IT1005(Planned compensation) in OM.Every other thing is ok.Except IT581.
What i beleive is its taking assignement from table V_T7INA3.where i am not able to store ESG for CAP, groups and levels.Because its taking value from T510.But i want to do everything on basis of pay scale grade ie T710.
Need your help and inputs....

Dear Sumo,
Kindly update feature 40 ECC which will help to automatic open the IT0008 for autmatic updation of such wagetypes ex: HRA
you can maintain percentage their for the particular wagetype for
40ECS - HR-IN : Feature to Determine Elgibility for RAPS
This feature is used to determine the factor which is multiplied with
the Reimbursement, Allowance or Perk (RAP) amount to calculate the
amount payable to the employee.
rocedure
The factor can be arrived at by making a decision on the following
details:
Country Grouping
Company Code
Payscale Grouping for Allowances
Wage Type
Gender Key
Number of children for children education allowance
Number of children for children hostel allowance
Personnel Number
ample
As per company A's policy, all employees belonging to the Payscale
Grouping for Allowance MN01, receive twice the amount eligible for
Childrens' Education Allowance (wagetype M260) in case the employee has
two or more children.
1           D   MOLGA
2   **          &ELIAL=1
3   40      D   LGART
4   40 ****     &ELIAL=1
5   40 M260 D   CEANO
6   40 M260 *   &ELIAL=2
7   40 M260 1   &ELIAL=1
kindly update the same and let me know.
rgds,
priyanka

No automatic updation for IT0008. Allowance Grouping not found.

Hi
Guys whenever i am saving any employees 0581 it by giving metro,city allowances information in PA 30 i am getting the message "No automatic updation for IT0008. Allowance Grouping not found".
Can anybody tell what the reason behind it?
Regards
Surajit

Hi Sikindar,
Request you to let me know, if in table V_512W_D, in the cumulations column 14-HRA Basis, if there should be a check for wage type M230.
Would this solve the problem of automatic updation on infotype 0008??
Priority:HIGH
Thanks in advance,
Regards,
Angel

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at http:// (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Is this a webpage that contains a link to a flv file? Please post a link to the page and tell us which link(s) are the problem flv files or else post a link to the .flv file itself.
Alternately, click on one of the sample FLV File links on this page and tell us exactly what happens:
http://www.mediacollege.com/adobe/flash/video/tutorial/example-flv.html
It might also help if you post the exact error message, including the path to the flv file.
'''Note:'''
Depending on how you have Firefox set up, clicking on a FLV File link will either save the FLV file to your computer or Firefox may open it automatically in an external application right after downloading (Firefox may ask you first). Firefox itself can't play FLV files so you need a "helper" application (or a plugin for flv files, if ther is one. You can see if Firefox is already set up to download or open FLV files by going to Firefox Preferences and looking in the Applications list. Find the FLV file type in the list and, if the action is "Open with", it should show the application that can play FLV files (e.g., VLC Media Player or Perian). See [[Managing filetypes]] for more information.

Error executing Rapidmart Job for Sales Rapidmart. AW_JOBEXECUTION not found error.

Hello experts,
I am currently in the processing of installing a sales rapidmart. I've followed all the steps up to the point of deploying the Sales_Load_SAP job in Data Services, however, when I run the job I receive the following error:
332
15284
DBS-070602
11/13/2013 10:54:59 AM
|Session Sales_Load_SAP
332
15284
DBS-070602
11/13/2013 10:54:59 AM
Sybase SQL Server <NAUSSAP011> error message for operation <ct_results>: <Sybase ASE Server message number <208> State <1>
332
15284
DBS-070602
11/13/2013 10:54:59 AM
Severity <16> From Server <NAUSSAP011>:   Message Text is: dbo.AW_JOBEXECUTION not found. Specify owner.objectname or use
332
15284
DBS-070602
11/13/2013 10:54:59 AM
sp_help to check whether the object exists (sp_help may produce lots of output).
332
15284
DBS-070602
11/13/2013 10:54:59 AM
>.
332
15284
RUN-050304
11/13/2013 10:54:59 AM
|Session Sales_Load_SAP
332
15284
RUN-050304
11/13/2013 10:54:59 AM
Function call <sql ( RM_DS, select LOAD_NUMBER from dbo.AW_JOBEXECUTION where NAME = 'Sales_Load_SAP' ) > failed, due to error
332
15284
RUN-050304
11/13/2013 10:54:59 AM
<70602>: <Sybase SQL Server <NAUSSAP011> error message for operation <ct_results>: <Sybase ASE Server message number <208>
332
15284
RUN-050304
11/13/2013 10:54:59 AM
State <1> Severity <16> From Server <NAUSSAP011>:   Message Text is: dbo.AW_JOBEXECUTION not found. Specify owner.objectname or
332
15284
RUN-050304
11/13/2013 10:54:59 AM
use sp_help to check whether the object exists (sp_help may produce lots of output).
332
15284
RUN-050304
11/13/2013 10:54:59 AM
>.>.
332
15284
RUN-053008
11/13/2013 10:54:59 AM
|Session Sales_Load_SAP
332
15284
RUN-053008
11/13/2013 10:54:59 AM
INFO: The above error occurs in the context <|Session Sales_Load_SAP|Assignment Step 7 $G_LOAD_NUMBER=...|nvl(...) Function
332
15284
RUN-053008
11/13/2013 10:54:59 AM
Parameter-1|sql(...) Function Body|>.
332
15284
DBS-070602
11/13/2013 10:54:59 AM
|Session Sales_Load_SAP
332
15284
DBS-070602
11/13/2013 10:54:59 AM
Sybase SQL Server <NAUSSAP011> error message for operation <ct_results>: <Sybase ASE Server message number <208> State <1>
332
15284
DBS-070602
11/13/2013 10:54:59 AM
Severity <16> From Server <NAUSSAP011>:   Message Text is: dbo.AW_JOBEXECUTION not found. Specify owner.objectname or use
332
15284
DBS-070602
11/13/2013 10:54:59 AM
sp_help to check whether the object exists (sp_help may produce lots of output).
332
15284
DBS-070602
11/13/2013 10:54:59 AM
>.
332
15284
INZ-120510
11/13/2013 10:54:59 AM
Error number <120510> occurred. There is no additional description. Notify Customer Support. Message parameters are:
332
15284
INZ-120510
11/13/2013 10:54:59 AM
<CT_CMD_DROP failed>.
I've checked the RM_DS data store to see if this table exists and it does not within that data store..Has anyone run into this error before? How was it resolved?
Any and all assistance is greatly appreciated.
- Eric.

To update
I created the table in the target database...I am now receiving the following errors:
15256
10336
DBS-070602
11/13/2013 2:16:42 PM
|Session Sales_Load_SAP
15256
10336
DBS-070602
11/13/2013 2:16:42 PM
Sybase SQL Server <NAUSSAP011> error message for operation <ct_results>: <Sybase ASE Server message number <102> State <181>
15256
10336
DBS-070602
11/13/2013 2:16:42 PM
Severity <15> From Server <NAUSSAP011>:   Message Text is: Incorrect syntax near ')'.
15256
10336
DBS-070602
11/13/2013 2:16:42 PM
>.
15256
10336
RUN-050304
11/13/2013 2:16:42 PM
|Session Sales_Load_SAP|Function AW_StartJob
15256
10336
RUN-050304
11/13/2013 2:16:42 PM
Function call <sql ( RM_DS, insert into dbo.AW_JOBEXECUTION (CLIENT_ID, NAME,
15256
10336
RUN-050304
11/13/2013 2:16:42 PM
EXTRACTLOW, EXTRACTHIGH, STATUS, LOAD_ATTEMPT, LOAD_NUMBER, LOAD_DATE) values ('0060', 'Sales_Load_SAP', '1990.01.01',
15256
10336
RUN-050304
11/13/2013 2:16:42 PM
     '2013.11.13', 'started', 1,0, ) ) > failed, due to error <70602>: <Sybase SQL Server <NAUSSAP011> error message for
15256
10336
RUN-050304
11/13/2013 2:16:42 PM
operation <ct_results>: <Sybase ASE Server message number <102> State <181> Severity <15> From Server <NAUSSAP011>:   Message
15256
10336
RUN-050304
11/13/2013 2:16:42 PM
Text is: Incorrect syntax near ')'.
15256
10336
RUN-050304
11/13/2013 2:16:42 PM
>.>.
15256
10336
RUN-053008
11/13/2013 2:16:42 PM
|Session Sales_Load_SAP
15256
10336
RUN-053008
11/13/2013 2:16:42 PM
INFO: The above error occurs in the context <|Session Sales_Load_SAP|16 If Step body|$ret=...|sql(...) Function Body|>.
15256
10336
DBS-070602
11/13/2013 2:16:42 PM
|Session Sales_Load_SAP
15256
10336
DBS-070602
11/13/2013 2:16:42 PM
Sybase SQL Server <NAUSSAP011> error message for operation <ct_results>: <Sybase ASE Server message number <102> State <181>
15256
10336
DBS-070602
11/13/2013 2:16:42 PM
Severity <15> From Server <NAUSSAP011>:   Message Text is: Incorrect syntax near ')'.
15256
10336
DBS-070602
11/13/2013 2:16:42 PM
>.
15256
10336
INZ-120510
11/13/2013 2:16:42 PM
Error number <120510> occurred. There is no additional description. Notify Customer Support. Message parameters are:
15256
10336
INZ-120510
11/13/2013 2:16:42 PM
<CT_CMD_DROP failed>.

Flash CS5 wont open after working for years? Entry point Not Found

Hi Guys,
I am having a problem opening my Flash CS5 after it working fine since I installed it forever ago. I do not know what could have caused this, and my other cs5 programs are opening fine.
Dreamweaver and Fireworks didnt change all (these 3; along with Flash; are what I use most)
I also open photoshop and aftereffects from my master collection for testing and they opened fine also. I ran a scan using microsoft essentials and found nothing.
I tried run as administrator on flash and it said the same thing.
I am using windows 7 Ultimate N SP1 64 bit
Here is the alert in text.
flash.exe -Entry Point Not Found
The procedure entry point ?ButtonChanged@UI_ClearButtonTextEdit@controls@dvaui@@UAEXP
AVUI_ButtonChangedMessage@23@@Z could not be located in the
dynamic link library dvaui.dll
Please let me know what is going on here.
Thanks, I really appreciate the help.
Randy

You should be able to cherry pick Flash out to uninstall and reinstall it from the master suite installer if I remember correctly. There's nothing wrong with a fresh reinstall, especially after years. That's a long time to be bulletproof.
Otherwise I can't hand you a commercial DLL but I really don't think your problems will be fixed even if I did. I think it's just hardware doing what it's notorious for, eventually having a fault somewhere. A reinstall of Flash should be fast and will write to new sectors and fix the file.

END point URL for ESB Routing service says NOT FOUND

Hi All,
For the routing services in ESB, The link of WSDL is opening up fine, but the link of endpoint URI for the routing service is failing with the message below message. When i invoke the WSDL using SOAP UI, i get back the the same error message. I tried bouncing the server , but of no help. I also notice that slide directory ESB_Projects gives 404 error on any browser.
So when i click below url for any of the routing service
http://<hostname>:<port>/event/<systemName>/<serviceGroupName>/AddressStandardizeRS
I get below error in browser-
Not Found
The requested URL /event/<System Name>/<Service Group Name>/<Routing Service Name> was not found on this server.
Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at odevsoa.local1.wbcgp.com Port 7777

Check if the port of ESB in your server is open.
I think that the port is: 7777
try from ESB server:
wget WSDLURI
if you got the file then the port is closed.

When I click on Mozilla Firefox I get server not found. When I ask for help I get server not found. Without my intention visual bee is in background.

I recently responded to a prompt to upgrade Mozilla Firefox and started seeing visual bee in background and got lookup for browser safeguard.com.com failed. Can't get into Firefox. My version is 3.6.12. Help requested. Thanks Keith

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

BDC for PA30 action hire is not creating entry in IT 1001

Hello All,
I created a BDC for to create hire action in system to create some dummy data, but its not creating entry in infotype 1001 for relation between person (P) and position (S). If i create entry in PA30 it create ebtry, if i try BDC in Dialog mode even then its not creating it.
I read a lot about Dynamic action in this kind of issue but i seen table T588Z but there is no any insert dynamic action for IT 1001.
Can anybody throw some light on the cause of the same.
i tried to create same data with FM HR_MIANTAIN_MASTERDATA but i have to drop that idea becasue it was not able to crate record with empty PERNR field. if your answer is use this FM then please provide some working code as i searched a lot on the same issue but no any concrete proof on the same.
appreciate any reply.
Mani

Hi,
Are you getting any error?
If not i think you have to lock the employee before creating an entry to the IT 1001 using FM
'BAPI_EMPLOYEE_ENQUEUE'
and create an entry to IT 1001 using BDC or HR_MIANTAIN_MASTERDATA
and unlock an employee by using FM
'BAPI_EMPLOYEE_DEQUEUE'
Regards
Krishna

Native Extension for AIR publishing error : framework not found

Hello,
I'm trying to build an iOS app using native extensions for AIR, but when I publish, I've an error message saying : framework not found
I tried with this ANE for GameCenter integration : https://github.com/StickSports/ANE-Game-Center
it says " ld: framework not found GameKit "
Same problem with GREE Platform SDK for AIR :
https://docs.developer.gree.net/en/globaltechnicalspecs/#sdkforair
it says " ld: framework not found CoreTelephony "
The thing is that these frameworks are already included, I guess.
I'm using flash cs6 on mac, and I've included the path to iOS SDK in the publishing settings.

Are you using the ANE from there or are you recompiling the ANE at your end?
If you are recompiling, please make sure that you are using the platform.xml file they have provided.
If you are using their precompiled ANEs, probably, the path to iOS SDK is not correct. It should be upto the folder iPhoneOSx.y.sdk.

When tried to login WebConsole for the first time 404 not found error got

Hi All,
We have recently installed MI 7.0(NW2004s) and configured also as per the configuration document. But when we tried to login WebConsole we are getting the error of 404 not found. I donot know what and where I have test to login to WebConsole.
Is there any way how to test to login to WebConsole for the first time.
Appreciate your help.
Regards,
Ameer Baba.

Hi Ameer,
Can you please try with the link "http://servername:portnumber/nwa", this is to open NettWeaver Mobile Administrator, as on the above reply Namitha said there is no Webconsole on MI 7.0(NW2004s) .
Regards,
Satyendra

RMAN failure for "archive-log ... not found in controlfile"

Recovery Manager: Release 8.1.6.0.0 - Production
RMAN> connect target sys/XXXX@cldb;
2> connect catalog rman/XXXX@rmandb1;
3>
4> resync catalog;
5>
6> # Backup the database
7> run {
8> allocate channel ch1 type disk;
9> backup incremental level 0 format
10> '/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/backup_%t_%s_%p' database;
11> sql 'alter system archive log current';
12> }
13>
14> # Backup the archived redo logs
15> run {
16> allocate channel ch1 type disk;
17>
18> backup incremental level 0 format
19> '/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/archivelog_%t_%s_%p' archivelog all;
20> sql 'alter system archive log current';
21> }
22>
23> # Backup the control file
24> run {
25> allocate channel ch1 type disk;
26> sql 'alter database backup controlfile to trace';
27> copy current controlfile to
28> '/tools/cm/clearquest/orabackup/cldb.cqdbserver/controlfile.bak';
29> }
30>
31>
RMAN-06005: connected to target database: CLDB (DBID=1292102281)
RMAN-06008: connected to recovery catalog database
RMAN-03022: compiling command: resync
RMAN-03023: executing command: resync
RMAN-08002: starting full resync of recovery catalog
RMAN-08004: full resync complete
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: ch1
RMAN-08500: channel ch1: sid=17 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03023: executing command: backup
RMAN-08008: channel ch1: starting incremental level 0 datafile backupset
RMAN-08502: set_count=816 set_stamp=422358010 creation_time=22-FEB-01
RMAN-08010: channel ch1: specifying datafile(s) in backupset
RMAN-08522: input datafile fno=00001 name=/opt/orabase/oradata/cldb/system01.dbf
---snip----
more like this
---snip----
RMAN-08013: channel ch1: piece 1 created
RMAN-08503: piece handle=/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/backup_422358010_816_1 comment=NONE
RMAN-08525: backup set complete, elapsed time: 00:01:46
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-03022: compiling command: sql
RMAN-06162: sql statement: alter system archive log current
RMAN-03023: executing command: sql
RMAN-08031: released channel: ch1
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: ch1
RMAN-08500: channel ch1: sid=17 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03025: performing implicit partial resync of recovery catalog
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-03023: executing command: backup
RMAN-08009: channel ch1: starting archivelog backupset
RMAN-08502: set_count=817 set_stamp=422358179 creation_time=22-FEB-01
RMAN-08014: channel ch1: specifying archivelog(s) in backup set
RMAN-08504: input archivelog thread=1 sequence=85 recid=2610 stamp=422352397
RMAN-08504: input archivelog thread=1 sequence=86 recid=2611 stamp=422352397
----snip----
more similar stuff here
----snip----
RMAN-08504: input archivelog thread=1 sequence=140 recid=2732 stamp=422358121
RMAN-08013: channel ch1: piece 1 created
RMAN-08503: piece handle=/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/archivelog_422358179_817_1 comment=NONE
RMAN-08525: backup set complete, elapsed time: 00:00:17
RMAN-08009: channel ch1: starting archivelog backupset
RMAN-08502: set_count=818 set_stamp=422358197 creation_time=22-FEB-01
RMAN-08014: channel ch1: specifying archivelog(s) in backup set
----snip----
more like this
----snip----
RMAN-08504: input archivelog thread=1 sequence=164 recid=2756 stamp=422358123
RMAN-08504: input archivelog thread=1 sequence=165 recid=2757 stamp=422358123
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAG E STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03006: non-retryable error occurred during execution of command: backup
RMAN-07004: unhandled exception during command execution on channel ch1
RMAN-10035: exception raised in RPC: ORA-19571: archived-log recid 2011 stamp 419161314 not found in controlfile
RMAN-10031: ORA-19571 occurred during call to DBMS_BACKUP_RESTORE.BACKUPARCHIVEDLOG
I added the resync catalog command to the backup. But I am still getting this error. What is happening? I have the control_file_record_keep_time = 14 in the paramater file. Do I need to change this to something greater?
null

The error message is pointing to an inconsistency between what RMAN "thinks"
should be there and what is in control files.
There are a few things you can try to do
1. Compare V$LOG, V$LOGFILE, etc. Some of these views are based on control files
2. Shutdown and restart the instance.
This may help in synchronizing control files
with internal structures.
3. Trace RMAN session using oradebug and even 10046 to find out what it is doing
4. Dump entire controlfile to trace using
alter session set events 'immediate trace name controlf level 10';
Or dump loghist only
alter session set events 'immediate trace name loghist level 4';
This will dump 2**level entries.
5. Re-create controlfiles with CREATE CONTROLFILE
Regards,
Sev

Workflow for PO release strategy agent not found

Hi all,
I m beginner in the workflow. i want to create a workflow for the PO. release strategy I have done all the settings in the SPRO for the release strategy. I have copied the standard workflow definition WS20000075 also done the binding with object type BUS2012. in the steps 'Release of purchase order' i have mentioned the task TS20000166 i.e. 'Release of purchase order' and also maintain the AC Rule 20000027 i.e. 'Person responsible for PO release' for agents. But still its not getting the agents. the workflow is getting triggered but its not getting the agent. What else setting I need to do to get this done.
Thanks a lot.
Regards.

Very well put Rick. In my case if i simulate this workflow from swdd transaction then it works fine but the same workflow when initiated from ME21N doesn't work and throws same error.
1. I have copied standard workflow and task 166 is throwing error.
"Resolution of rule AC20000027 for task TS20000166: no agent found"
2. I have recreated the step but still the workflow is throwing error.
3. If I execute the rule individually (PFAC_DIS) with a specific PO then the rule works fine. The rule executes the below mentioned exit successfully.
4. I am using exit to determine the agent, the workflow works fine if I don't use the exit. The exit is EXIT_SAPLEBNF_005. I am just pulling the agent from a ztable.
Please advise if you can help as I have not seen anyone answering.
by the way irrespective of the explicit rule update in the workflow the step executes AC20000027 by default.
Any help on above is appreciated.

Balancing figure business area for line item 001 is not found

hi
In MB31 while doing Goods Receipt (Movement type:101) i am getting an error like "Balancing figure Business Area for line item001 not founr". Document splitting is active in my system and i assigned business area for plant and division combination. Why i am getting this error. Anywhere else i have to assign business area. Pls help me.

hi,
i am following rule no 1 and the assignment is fine over there
it is working for all line items except one line item and giving message like above menctioned in subject line but if i check in line item 30 business area is exist like all line item i.e 1100
for any information revert it
regards
bvdv

BDC for CKECP- Item fields are not captured

Hi all
I recorded transaction CKECP using shdb.
In that if we click 'Show/hide item view' the item wise details to be entered appears.
items were entered. Transaction recorded.
But the item fields are not appearing in the recording.
Can somebody explain to me ?
Vijaya Chamundi

you can use BAPI
2044                           BAPIs for Business Object Cost Estimate
BAPI_COSTESTIMATE_ALLOW_MARK   Grant Marking Allowance for Costing
BAPI_COSTESTIMATE_ALLOW_MA_GET Determine Organizational Measures
BAPI_COSTESTIMATE_CREATE_SPLIT Create Cost Estimate with Cost Component Split
BAPI_COSTESTIMATE_DELETE       Delete Cost Estimate
BAPI_COSTESTIMATE_DELETE_MULTI Delete Cost Estimates
BAPI_COSTESTIMATE_GETDETAIL    Determine Detailed Information for a Cost Estima
BAPI_COSTESTIMATE_GETEXPLOSION Determine BOM Explosion for a Cost Estimate
BAPI_COSTESTIMATE_GETLIST      Determine Cost Estimate Lists
BAPI_COSTESTIMATE_ITEMIZATION Determine Itemization for a Cost Estimate
BAPI_COSTESTIMATE_MARKING      Marking Standard Cost Estimate
BAPI_COSTESTIMATE_RELEASING    Release of Marked Standard Cost Estimates
BAPI_COSTESTIMATE_UPDATE_PRICE Update of Prices in Material Master
BAPI_SHIPMENT_COST_ESTIMATE    Calculate Shipment Costs of Different Forwarding

BDC FOR F-58 - BKPF-BLART NOT FOUND ON DYNPRO

Similar Messages

Maybe you are looking for