BDC- for IW51 - How to change tabstrip

Hi,
I am new to BDC. Creating one for IW51.
Here, in next tabstrip - (Additions data 1) I need to add ' Coding' .
I tried but Notification is Saved (First page), but without coding field.
How to do it?

I did it - Using SM35
51     SAPLIQS0     7200     X
52                                                                 BDC_OKCODE     =10\TAB02
53                                                                 BDC_SUBSCR     SAPLIQS0                                1060SCREEN_1
54                                                                 VIQMEL-QMTXT     I&C AT,ALEMBIC LIMITED,BARODA
55                                                                 BDC_SUBSCR     SAPLQM07                                3000ACTION-BOX
56                                                                 BDC_SUBSCR     SAPLIQS0                                7235SUB_GROUP_10
57                                                                 BDC_SUBSCR     SAPLIQS0                                7212CUSTOM_SCREEN
58                                                                 BDC_SUBSCR     SAPLIQS0                                7515SUBSCREEN_1
59                                                                 VIQMEL-QMDAT     02.08.2010
60                                                                 VIQMEL-MZEIT     15:15:59
61                                                                 VIQMEL-BSTNK     HPP/291188
62                                                                 VIQMEL-BSTDK     04.03.2010
63                                                                 BDC_SUBSCR     SAPLIPAR                                0700ANSPRECH
64                                                                 BDC_SUBSCR     SAPLIPAR                                0130TSTRIP_SCREEN
65                                                                 BDC_SUBSCR     SAPLIPAR                                0150ADRESSE
66                                                                 VIQMEL-KUNUM     700023
67                                                                 BDC_SUBSCR     SAPLIPAR                                0120ANSCHRIFT
68                                                                 BDC_SUBSCR     SAPLIPAR                                0160BUTTONS
69                                                                 BDC_SUBSCR     SAPLIQS0                                7322SUBSCREEN_2
70                                                                 BDC_SUBSCR     SAPLIWO1                                1200OBJEKT
71                                                                 RIWO1-EQUNR     1000047274
72                                                                 RIWO1-SERIALNR     309US5921003
73                                                                 RIWO1-MATNR     US5921
74                                                                 RIWO1-DEVICEID     0910/1299
75                                                                 BDC_SUBSCR     SAPLIQS0                                7520SUBSCREEN_3
76                                                                 VIQMEL-MAUEH     H
77                                                                 VIQMEL-STRMN     02.08.2010
78                                                                 VIQMEL-STRUR     15:15:59
79                                                                 VIQMEL-LTRMN     09.08.2010
80                                                                 VIQMEL-LTRUR     00:00:00
81                                                                 VIQMEL-AUSVN     02.08.2010
82                                                                 VIQMEL-AUZTV     15:16:00
83                                                                 VIQMEL-AUZTB     00:00:00
84                                                                 RIWO00-GEWRK     WCSSBRDA
85                                                                 RIWO00-SWERK     4000
86                                                                 VIQMEL-IWERK     4000
87                                                                 VIQMEL-VKORG     1000
88                                                                 VIQMEL-VTWEG     10
89                                                                 VIQMEL-SPART     UP
90                                                                 VIQMEL-VKBUR     VAD
91                                                                 VIQMEL-VKGRP     PNQ
92                                                                 BDC_SUBSCR     SAPLIPAR                                0400INTPAR
93                                                                 DIIHPA-I_PARNR     50000215
94                                                                 BDC_SUBSCR     SAPLIPAR                                0450VERA
95                                                                 BDC_CURSOR     RQM02-PARNR_VERA
96                                                                 RQM02-PARNR_VERA     416
97                                                                 BDC_SUBSCR     SAPLIQS0                                7324SUBSCREEN_4
98                                                                 BDC_SUBSCR     SAPLIQS0                                6030SUBSCREEN_5

Similar Messages

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.h

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.how to do that in xml file ?

Thanks john for you are reply.
I had tried what you sad.I open shared service in that foundation project i had export shared service.after that in import-export file.In that role.csv,user.csv,group.csv.Like this file have.When i open user file added some users after i trying save in excel it shown messgse
I click yes and save the .csv file and import from share servie. i got error like this
am i doing right way john.or explain clearly

I bought a ipod and the person that were pick it up for me at the applestore have to travel. now another peson will pick it up for me, how i change the pickup informations at website?

i bought a ipod and the person that were pick it up for me at the applestore have to travel. now another peson will pick it up for me, how i change the pickup informations at website?

Call the Apple Online Store, have your order number handy and talk to them. The phone number is shown in the Contact Us link on the bottom right of this screen.

Configuration Files for AEX: How to change between multiple configurations?

I have both an Airport Extreme and and Airport Express at home. The Extreme is used for my wireless network at my house and the Airport Express is used for streaming Airtunes. I want to use my Airport Exress as a base station when traveling (to my parents' house, hotels, etc.) and for streaming when I get home. I don't want to have to reconfigure the AEX each time I change uses for it. I have configuration files saved for both uses, but don't know how to change between them. The older version of Airport Utility allowed you to change between configurations, but I can't figure out how to do this with Airport Utility 5.4.2. In the older version, I could select the Airport station in AP Utility, click under configurations, choose my preferred file, and restart. Unplug the AEX and when I plugged it back in, it would load the preferred configuration. How do I do this with the newest AP Utility?

Oops, you're right, that article is a bit dated.
Try this ...
To create a new profile:
o Open AirPort Utility, select your AX from the list, and then, click "Manual Setup."
o From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
o Click "+" to create a new profile; give it a name, and then, click OK.
o Set options, such as network name, passwords, Internet connection method, etc.
o When done setting the options, click Update.
To switch profiles:
o Open the AirPort Utility, select your AX from the list, and then, click "Manual Setup."
o From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
o Click on the desired profile, and then, click OK to apply the new profile and restart the AX.
Just remember to switch to the desired configuration profile before removing power from the AX.

BDC for CO02 , How to check conditions

Hi,
i m trying a BDC of CO02- Change Production Order, i have recorded the transaction by changing the date field in the first screen and then by pressing "Operation Overview" button to change the "WorkCenter".
The Workcenter screen holds the value in the table control.
After recording , when i pass value from TXT file, the BDC Program should identify the table control row which is having AFVGD-KTSCH's Value as 'SEWING', so that the value from the TXT file should replace the another field AFVGD-ARBPL based on the stdtext-'SEWING'.
can any body help me in this.

dear prabhu,
see the below code, suggest me where to do the checking,
see the BOLD part of the mail for more info.
pls help in this, i m new to BDC.
regs,
raja
data: str type c length 1,
var type c length 30,
cntr type i.
data: begin of record,
AUFNR(012),
FLG_OVIEW(001),
GLTRP(010),
GSTRP(010),
ARBPL(008),
KTSCH(020),
end of record.
DATA: itab LIKE record OCCURS 1000 WITH HEADER LINE.
PARAMETERS textfile LIKE rlgrap-filename DEFAULT
'c:\prdord.txt'.
End generated data section ***
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename            = textfile
      filetype            = 'DAT'
    TABLES
      data_tab            = itab
    EXCEPTIONS
      conversion_error    = 1
      file_open_error     = 2
      file_read_error     = 3
      invalid_type        = 4
      no_batch            = 5
      unknown_error       = 6
      invalid_table_width = 7
      OTHERS              = 8.
IF sy-subrc <> 0.
    WRITE:/ 'Upload From',textfile,'to itab is not successful'.
    EXIT.
ENDIF.
LOOP AT itab.
IF sy-subrc <> 0. EXIT. ENDIF.
perform bdc_dynpro      using 'SAPLCOKO1' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'CAUFVD-AUFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'CAUFVD-AUFNR'
                              itab-AUFNR.
perform bdc_field       using 'R62CLORD-FLG_OVIEW'
                              itab-FLG_OVIEW.
perform bdc_dynpro      using 'SAPLCOKO1' '0115'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TERM'.
perform bdc_field       using 'BDC_CURSOR'
                              'CAUFVD-GSTRP'.
perform bdc_field       using 'CAUFVD-GLTRP'
                              itab-GLTRP.
perform bdc_field       using 'CAUFVD-GSTRP'
                              itab-GSTRP.
perform bdc_dynpro      using 'SAPLCOKO1' '0115'.
perform bdc_field       using 'BDC_OKCODE'
                              '=VGUE'.
perform bdc_field       using 'BDC_CURSOR'
                              'CAUFVD-GAMNG'.
perform bdc_field       using 'CAUFVD-GSTRP'
                              itab-GSTRP.
perform bdc_dynpro      using 'SAPLCOVG' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'AFVGD-KTSCH'.
<b>Here is where i need to check whether the 'AFVGD-KTSCH'containing value 'SEWING' then the itab value should be placed in the below screen-field.</b>
perform bdc_field       using 'BDC_CURSOR'
                              'AFVGD-ARBPL(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'AFVGD-ARBPL(02)'
                              itab-ARBPL.
perform bdc_dynpro      using 'SAPLCOVG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FREI'.
perform bdc_field       using 'BDC_CURSOR'
                              'PSFC_DISP-AUFNR'.
perform bdc_dynpro      using 'SAPLSPO2' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=OPT1'.
perform bdc_dynpro      using 'SAPLCOVG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'BDC_CURSOR'
                              'PSFC_DISP-AUFNR'.
CALL TRANSACTION 'CO02' USING bdcdata MODE 'A'.
if sy-subrc eq 1001.
write:/ ITAB-aufnr,ITAB-arbpl, ITAB-gstrp.
write 'Not Updated'.
else.
write:/ ITAB-aufnr,ITAB-arbpl, ITAB-gstrp.
write 'Updated Successfully'.
endif.
REFRESH bdcdata.
*else.
write 'Improper Text File Format'.
*endif.
endloop.

SAP Cloud For Customer : How to change the Logo or Image into the Standard Form Template

Hi Experts,
I have requirement to change the standard template format.
I have copy standard template and edit using Adobe Life Cycle Designer to change the logo / image.
After changed and upload modified template and change the output setting for print i can able to see the changes but logo / image can not display.
Can anyone have idea how to solve this issue ?
Can we change the template within cloud system?
If Yes than How ?
Regards,
Mithun

The following are the instructions (November 2014 version of SAP Cloud for Customer)
Edit a Form Master Template
Overview
As an administrator, you can edit existing form master templates. These are used to define the header, footer, and logos used in form templates. Form master templates also contain an e-mail disclaimer that is appended to automatically generated e-mails sent to business partners when a document is output from the system.
Procedure
1. Go to Application and User Management or Administrator Business Flexibility Master Template Maintenance .
2. In the Master Template Maintenance view, select Form Master Templates from the Show menu.
3. Select the master template you want to edit and click Edit.
4. On the Form Master Template tab, do the following:
Under Header, click Upload and browse to find the file you want as logo. Adjust the size and alignment of the logo, as required.The file formats .gif, .bmp, .jpg, .png, and .tif are supported. The logo should not be larger than 40 mm width x 20 mm height. If you upload a graphic that is larger than 40 mm x 20 mm, it is resized automatically.Select the Header Divider checkbox if you want a graphical divider to appear on your form.Under Sender Address, enter your company’s address. The sender address is shown above the recipient's address in a letter.Under Footer, choose the number of footer columns you want to display. Enter the footer text exactly as you would like it to appear on the form. You can maintain up to 4 footer blocks with a maximum of 10 lines per footer.Note that the width of each footer block is equally divided over the available space. If a line of text in the footer is too long for the current font size, the system will automatically enter a line break. If this automatic line break does not meet your needs, you may need to enter the text after the line break as a separate line.To maintain multiple languages, you must first add the language from the Add menu and then maintain the texts in that language by selecting the language from the dropdown list.
5. Click the refresh button to preview your changes. From the dropdown list under Preview, you can select a country. The preview is then displayed using the country-specific template, for example, some countries do not use sender addresses or have different paper sizes.
6. On the E-Mail Disclaimer tab, you can enter a disclaimer or other company-specific legal information.
This text is appended to the main text body of e-mails that are created when a document is output by the system. It is not possible to create separate language versions of this text; therefore if your company uses multiple communication languages, you should enter all language versions of the disclaimer here.
7. Click Save and Close.
Result
If required, you can now assign the form master template to a company/org unit and/or output channel. For more information, see the Master Template Maintenance Quick Guide.
Note that master templates can be activated and deactivated for each form template in the Form Template Maintenance view. For more information, see the Form Template Maintenance Quick Guide.

Pages for iPad - how to change left column in modern photo resume

Hi there ladies and gents. I've spent the better part of an hour poking around and researching this, but I think I just need to ask an expert.
I'm trying to create a "modern photo resume" document in pages on my ipad2. It starts out with a formatted document filled in with Lorum ipsum. The main body of the document is no problem, I can change that. The part I'm having a problem with is the left column text, with the name "Urna Semper," closely followed by another box of contact information with the same, uneditable properties. For the life of me, I can't find a way to edit any of this text. Selecting it only yields four options: cut, copy, delete, and lock. In the toolbar I can format it, change the size, font, layout, color, you name it. Anything you can think of except what the text in these boxes actually says.
It's driving me crazy.
Anyone with solutions to this will be my hero for the day. Thanks so much!
Zintense
En vino veritas

These are merge fields.
A double tap on them selects all and then you can type whatever you want in their place.
Peter

HT4528 All I am looking for is how to change my Apple ID on my phone.....

I am not able to use my iphone to update apps or even purchase them because my ID is wrong on the phone and it will not let me change it. Or better yet, I don't know where to go to change it.

Change the Apple ID used with a device - Settings > Store > tap on your AppleID
https://discussions.apple.com/message/18484935 - "In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again."

Problem with OPERATION TEXT(LTXA1) uploading using BDC For C202 Transaction

Hi Experts,
Im presently doing a BDC for the trransaction C202 (Change Master Recipe),my task was to upload the 'OPERATION TEXT' field PLPOD-LTXA1 which is actually Long text to an existing master recipe from a flat file during updation of the 'OPERATION TEXT the number of lines i was able to were 34 which we number lines on the displayed page and while updating the 35th line using the concept of bdc table control it is failing to insert the update text.
I used all the ok codes but failed to update more than 34 lines.So,can someone tell me how to update the longtext beyound it.
This is the Screenshot of my problem:
[BDC_C202_error|http://www.freeimagehosting.net/uploads/79af6bac49.jpg]
Thanx in advance.

Hi,
There is a better way of doing the long text upload in SAP. In your BDC, if I change the text editor, the BDC will not work.
Hence ,
Use function module " Save_Text" to update long texts in SAP.
Please check its FM documentation or perform a search for this FM in SDN for more clarity.
Write back in case you face further issues.
Regards,
Rijuraj
Edited by: Rijuraj Raju on Sep 10, 2010 3:05 PM

HT204053 hi i have purchased i pad when i am going to purchase its showing old ipad user name how to change it

hi
need help
i am new user
i got a ipad from one of my friends when ever i am trying to purchase any game or trying to download free games its showing old ipad users name and asking for password . how to change that ??????

Welcome to the Apple Community.
settings > store, sign out of his account and into yours.

How to handle tabstrips in BDC

Hi All,
Can anyone please let me know how to handle Tabstrips in BDC (Here Subscreen comes into picture).
Please give me advice on this any one, it is very urgent, please help me.
Many Thanks in Advance for u r Answer
Naren

Just use ABAPDOCU Transaction and see the complex screen menu,there you will find out example program for Tab strips.
for bdc point of view you need to do recording propery and copy the code .
only changes you need to do get the data from file to internal table.
use loop ur internal table ,withinin internal table paste ur code(screens,program name) and it should work.
Reward Points if it is useful
Thanks
Seshu

HR ABAP How to Write BDC For Infotype 0586

Hi Experts
Can Any One tell me how to write BDC for Infotype 0586 and also 585.
If we enter into the maintaining Screen, the lines in the Screen will dynamically changing depending on the values.
When I am doing recording , If I press page down after entering values in top lines, the lines are changing and the records are not updating Correctly.
I need to write BDC to Create Change.
Can any one please help me in this regard?
Thanks in Advance.
Regards
Avinash.

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.google.co.in/search?hl=en&q=SAPBDCtable+control&meta=
http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm

How to change workcenter using bdc

hi,
can any one help me that how to change Workcenter while creating production order.
plz its urgent.
plzzzzzz
Gowri

Gowri,
Before calling BDC upload u have to do the validations,So put a logic for which Items u have to change WC.
try to use any BAPI to overcome TC issue.
Sample program here.
data: str type c length 1,
var type c length 30,
cntr type i.
data: begin of record,
AUFNR(012),
FLG_OVIEW(001),
GLTRP(010),
GSTRP(010),
ARBPL(008),
KTSCH(020),
end of record.
DATA: itab LIKE record OCCURS 1000 WITH HEADER LINE.
PARAMETERS textfile LIKE rlgrap-filename DEFAULT
'c:\prdord.txt'.
End generated data section ***
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = textfile
filetype = 'DAT'
TABLES
data_tab = itab
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
OTHERS = 8.
IF sy-subrc <> 0.
WRITE:/ 'Upload From',textfile,'to itab is not successful'.
EXIT.
ENDIF.
LOOP AT itab.
IF sy-subrc <> 0. EXIT. ENDIF.
perform bdc_dynpro using 'SAPLCOKO1' '0110'.
perform bdc_field using 'BDC_CURSOR'
'CAUFVD-AUFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'CAUFVD-AUFNR'
itab-AUFNR.
perform bdc_field using 'R62CLORD-FLG_OVIEW'
itab-FLG_OVIEW.
perform bdc_dynpro using 'SAPLCOKO1' '0115'.
perform bdc_field using 'BDC_OKCODE'
'=TERM'.
perform bdc_field using 'BDC_CURSOR'
'CAUFVD-GSTRP'.
perform bdc_field using 'CAUFVD-GLTRP'
itab-GLTRP.
perform bdc_field using 'CAUFVD-GSTRP'
itab-GSTRP.
perform bdc_dynpro using 'SAPLCOKO1' '0115'.
perform bdc_field using 'BDC_OKCODE'
'=VGUE'.
perform bdc_field using 'BDC_CURSOR'
'CAUFVD-GAMNG'.
perform bdc_field using 'CAUFVD-GSTRP'
itab-GSTRP.
perform bdc_dynpro using 'SAPLCOVG' '0100'.
perform bdc_field using 'BDC_CURSOR'
'AFVGD-KTSCH'.
Here is where i need to check whether the 'AFVGD-KTSCH'containing value 'SEWING' then the itab value should be placed in the below screen-field.
perform bdc_field using 'BDC_CURSOR'
'AFVGD-ARBPL(02)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'AFVGD-ARBPL(02)'
itab-ARBPL.
perform bdc_dynpro using 'SAPLCOVG' '0100'.
perform bdc_field using 'BDC_OKCODE'
'=FREI'.
perform bdc_field using 'BDC_CURSOR'
'PSFC_DISP-AUFNR'.
perform bdc_dynpro using 'SAPLSPO2' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=OPT1'.
perform bdc_dynpro using 'SAPLCOVG' '0100'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'BDC_CURSOR'
'PSFC_DISP-AUFNR'.
CALL TRANSACTION 'CO02' USING bdcdata MODE 'A'.
if sy-subrc eq 1001.
write:/ ITAB-aufnr,ITAB-arbpl, ITAB-gstrp.
write 'Not Updated'.
else.
write:/ ITAB-aufnr,ITAB-arbpl, ITAB-gstrp.
write 'Updated Successfully'.
endif.
REFRESH bdcdata.
*else.
write 'Improper Text File Format'.
*endif.
endloop.

Need help in BDC for Customer master change

I have an interface for Changing Customer master data and I am using BDC for that. I have three scenarios:
1. Insert new data.
2. Change the existing data.
3. Delete the existing data.
The BDC is working fine in the first two scenarios, but if i want to delete an the existing data, lets say for e.g. Name3 or Email Id its not working because i need to pass the value as blank in the BDC for this field.How would i check? i thought i would first get the existing value in customer master and check if the interface value is blank then make this field value to blank in BDC.
But this is not working because in case the interface wants to remove only the email id, the other fields would still be blank.
How to handle this scenario, please advice.

What is the difference between 2 and 3? Isn't "deleting data" in your context the same as changing to a blank value?
Why can you not just fill the value as received in the input data into the BDC data?
Thomas

How to change keyboard map fmrweb.res for different forms

I'm using Oracle Forms 10g with Oracle Forms and Reports Application server 10g.
I know how to change fmrweb.res to change how keys function on web forms. The problem I'm having is I only know how to assign the fmrweb.res file when connecting to the application server, which means all forms running on that session have to use the same keyboard mapping.
I know you can change the defualt fmrweb.res for all the forms executed on the application server
and you can change the fmrweb.res file in the URL like
server/forms/frmservlet?Form=login.fmx&config=dataentry
(where dataentry is defined in the formsweb.cfg file)
and in the config section I have
[dataentry]
term=fullpath/fmrweb_new.res
My question is, is there a way to pick a different fmrweb.res file based on the form?
Can you specify multiple forms in the basexxx.htm file(basejini.htm) in the PARAM section like
<PARAM NAME="serverArgs"
VALUE="module=form1.fmx term=fillpath/filename1.res"
VALUE="module=form2.fmx term=fillpath/filename2.res"
VALUE="module=form3.fmx term=fillpath/filename3.res"
VALUE="module=form4.fmx term=fillpath/filename4.res">
Is there a way to pass term=fullpath\filename.res to the Oracle Forms Web Runtime process for each form using call_form, open_form, or new_form?
Edited by: user537213 on Sep 19, 2008 5:38 PM
Edited by: user537213 on Sep 19, 2008 6:24 PM

Posiible approach (i now it sounds strange):
Configure your enter-key to fire the KEX-EXEQRY-Trigger.
In the dataentry-form-module: Overwrite the KEY-EXEQRY-Trigger so thtat is just does a NEXT_ITEM; .
I know there may be other implications depending of the compelixity of your dataentry-form, but maybe this helps.

BDC- for IW51 - How to change tabstrip

Similar Messages

Maybe you are looking for