BDC for master recipe

Hi
Please provide some code logic for BDC of C201.
If any FM or BAPI is available please provide the names.
Thanks in advance.
Regards
Moderator Message: Cannot provide code. Do your own work.
Edited by: kishan P on Jan 19, 2011 4:06 PM

hi
I have already recorded the transaction.There is a table control in 3rd screen.I am new to table control bdc.
if you have this code for c201 please post it.
it will be very helpful

Similar Messages

Need bdc program for master recipe

Hi All,
Can any one please give me BDC code for Master Recipe Data Upload or is ther any standard program available to upload Master Recipe data?.
Regards
Sathish

Hi,
Can you share the same to me as well.
as I also have the same requirement
Thanks

In LSMW which method is exactly suits for Master Recipe Creation (TC-C201)

Hi All,
I am unable to find which method suits for Master Recipe Creation in LSMW.
Please send me in detail if any method suits.
Can any body help me in this.
Points will be awarded for correct answer which helps me come out of this problem.
Regards,
Shobha

Hi shobha,
if there is code u have to do before uploading go for BDC or BAPI,
it not go for LSMW (recording method) --> in this its very difficult to code.
Thanks

Do you know the idoc for master recipe?

Hi all.
Do you know the idoc for maintain master recipe?
I am looking for the idoc.
I would like to create, update and delete master recipe with idoc.
I have investigated about idoc,but can't find suitable idoc.
(I did find it for BOM, but for recipe is nothing.)
Thank you in advance..
Satoru

Hello,
As far as I can see there are no BAPI's or IDOC's available to upload Master Recipe data.
A suggestion would be to use the batch input technique to upload the master recipe master data. You find the documentation of the batch input recorder etc. via the menu path System -> Services -> Batch input -> Recorder
I hope it helps,
Regards,
Marcelo

Function module Vs BDC for master data upload

Hi ,
Please advice we should use the following function modules for master data upload or we should go for BDC.
MP_RFC_SINGLE_CREATE
MP_RFC_INACT_CHANGE
MPLAN_CREATE
MPLAN_CHANGE
MPLAN_SET_DELETION_INDICATOR
ASSET_MASTERRECORD_MAINTENANCE
MPLAN_ITEM_CREATE
MPLAN_ITEM_CHANGE
GL_ACCT_MASTER_SAVE
GL_ACCT_MASTER_SAVE
GL_ACCT_MASTER_SAVE
Actually, we have already used these function modules in our upload program, but we are not sure if these function modules will create any data inconsistency.
Please let me know, if we should continue using the FMs, or there is any risk using the FMs and we should replace them by BDC.
Thanks in advance.

HI Vikram,
Better to serch for the BAPI for uploading the master data.Becuase we have problems with BDC and FM's.
If you use FM's it does n't contain all the fields which you want.IF you go for BDC this is not maintainable for future releaseas.IF you upgrade then screen may change.
IF don' have any BAPI then better go for BDC.
Thanks

Unable ot activate ECM for Master Recip - Scenario - ECR with Release Key.

Dear Friends,
We want to activate ECM for Material BOM as well as Master Recipe.
Scenario : ECR with Release Key.
We are able to activate for BOM only.
In object Screen, Master Recipe iline item is greyed out.
System : ECC 6.0 - Ehp4
Please guide.
With best Regards,
Raghu Sharma.

Hello Raghu,
It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
Regards
Prasad K
Edited by: Prasad K on Jul 7, 2010 4:31 AM
Edited by: Prasad K on Jul 7, 2010 4:32 AM

Report for Master Recipe

Hi All;
Is there any report apart from C251 which would give the deatils of the Master Recipe or to be more specific we need to download the Inspection characteristics from the Master Recipe.
Regards

Hi Lucky 121,
Please try and check table PLKO whether it meets ur requirement.
Regards
Suri

LSMW FOR MASTER RECIPE

Hello
Iu2019m working in lsmw master recipe "standard" by using object "0170" and method : batch input "0001"
when i want to create the structure I don't find same zone like "PVZNR" "PHFLG"...
Please note that i have master recipe contained more than 25 operations and 25 phase it's hard to created manually.
is there an easy solution to load MR by lsmw.
i will be thankful if you help me
Foued

HI Foeud,
Please post your question here:
ABAP Connectivity
Best Regards,
Ravi

Master Recipe by LSMW

Hello gurus,
Is it possible to use the LSMW for Master Recipe (TCODE c201) data migration? If so, is there a document or a web site which can guide me? Please help

Hi,
Unfortunately, i could not found any LSMW for master recipes.
What I have done past is in LSMW create a screen recording of C201 and use the LSMW structure to do the rest (the mapping, conversions, etc). This work very well. It may take a few recordings to get all the data loaded (one for the operation/phases, one for the material assignment, etc) but it will work.
Or you can try with BDC For master recipe both in creation and change mode.
hope you will find this useful !!
Pradeep

BDC for C201(Master Recipe Create)

Dear,
Please help me in the following situation:
I have written a BDC for transaction code C201 for Master Recipe Creation. Its running ok.
But I have doubts like
for the 1st table control:
1) if for one operartion there are more than 1 phases
then what precautions are needed for page down.
for the 2nd level inner table control:
1) I am in the process of coding pagedown for this 2nd table control. If I have to code for it what all precautions will I have to take?
And in total what all precautions will I have to take?
How feasible is this BDC?
I have searched for BAPI, but did not find one.
Kindly help me. I am under client pressure.
Thanks.
Regards,
Shambhavi.
Edited by: Shambhavi Salunkhe on Jun 23, 2008 9:40 PM

Hi,
In C201 transaction we have a table control in the operations screen. below the table control we have some push buttons and a input text field, we can make use this field to handle the table control. If you are insertinga first operation, enter the value in first row of the table control. for the second operation onwards enter max valye like 99999 in the input text box and click on enter. all the previous rows will scroll up and always second row of the table control will be free, so you can put the data in the second row. in the same way you will have some button to handle the other table control too .I hope this will help You
Thanks,
rajinikanth
Edited by: Rajinikanth G on Jun 23, 2008 6:53 PM

Material Assignment in Master recipe

Hi,
Is there any FM/BAPI to assign material into a master recipe? Currently, we are using BDC to call C202 transaction for this purpose. This process takes long time for material assignment which leads to performance issue.
Thanks in advance
Senthil Kumar A

In LSMW , object BUS1012 is offered for routing creation and change .
Unfortunately there is no object for master recipe creation & change and there is no standard batch input, nor BAPI/IDOC, nor direct input. You should create your own batch input or CATT.
Here is a possible procedure:
Please record a Batch-Input with transaction SHDB and try if this work. If not please try with TOFF as described in the notes.
Read carefully SAP note 142022.

PI charactersitics in Master Recipe gets disabled.

Hi,
I would like to update the Process Instruction characteristics in a Master Recipe using Change Master (CC01) via BDC.Now when there is a change in one of the PI characteristics, my program updates the PI characteristics in the Master Recipe via BDC by creating a new Change Master, but in case the user again runs the same program after updating the PI characterestics using a different Change Master, all the the relevant rows are getting disabled, thereby not making it possible to either enter or modify any values in future.
Could you please let me know why this happens and how to over ride this problem ??
Thanks in Advance.
Lakshmi.

Hi
To activate ECN for Master recipe u need to set the Following
1) In OPN0 - Default values for Master recipe choose the Profile with which u want to create the Master recipe and Click on details > In the Change Parameters at bottom select "with Change Number" for Change Rule and SAVE
2) In OP5A - Select the Screen Group PP/PI/QM task lists: header screens and tick *Req * for the field Change Number (PLKOD-AENNR) and SAVE
Now when u Creating New Master recipe system will give Error if no change no assigned
Pl refer the link for more details
[http://help.sap.com/saphelp_dimp50/helpdata/en/89/a4200b461e11d182b50000e829fbfe/content.htm]
Regards
Brahmaji

Master recipe Batch-input / Bapi / Fct

Hi,
Does anybody have a program to insert data for master recipe ?
I didn't understand how to use fct MRTRS300_MASTER_RECIPE_SAVE and the Batch-input on C201 have oss note ...
Rgd
Frédéric

Frédéric,
I tackle the same question, I will let you know when I find something. Please post your findings here as well.
Regards,
Serge

Master Recipe - Operation Scrap

Hello,
We use master recipes. We are trying to maintain scrap% value for an operation/phase, and I don't this field on the screens.
Any thoughts? Is there a way to maintain scrap at operation level if we use Recipe?
I tried OP5D and I see that Scrap field is already listed as an Input field.

Hello
There is no operation scrap for master recipe and the phase scrap cannot be directly entered into the recipe like it is in the routings.
You can use material quantity calculation to calculate any loss during the phases.
Best regards
Caetano Almeida

BDC for C201 Master Recipe

Hello,
While in the process of creating a master Recipe we go through Material Components Assignment Screen.
In this each Item of the BOM is assigned to a Phase. Once we goto the detailed view of that particular item after assigning it to a phase, we donot see the product flow id while creating BDC Recording.
The subscreen for this is SAPLCMDE - 4301.
But while creating master recipe via online transaction the field Product Flow ID appears on the screen.
What is the solution to get field on the Recording Screen?

Hi Abhijit,
I have to upload recipe using t-code C201. I would appreciate if you tell me what method u have used exactly.
Any hint will be appreciable.
Thanks in advance
Ramgopal

BDC for master recipe

Similar Messages

Maybe you are looking for