BDC for XD02 -Custom Fields

Hello All,
              We have few custom fields on customer Master. These fields are on a new tab. When I do the recording for XD02 it shows the old XD02 transaction(We are on 6.0). It doesn't show custom fields and I don't see that there is any BAPI available to change these custom fields.  Does any one has an idea? Appreciate your input.
Thanks..

First check XD02 in eCC 6.0. If the custom fields are there then you should be able record those fields if not, first import the change or transport you made in previous version.
You can see the changes sitting in ECC 6.0 in transaction SE95

Similar Messages

  • Search Help for Infotype Custom Field

    Hi,
    I have created a search help for a custom field in an infotype. What would be the best way of filtering the help selection based on infotype values such as molga, begda, endda?
    Thanks in advance.
    /Elvez

    Hi Nishanth,
    thanks for your reply, perhaps I should clarify my question:
    1) I have a custom field in an infotype
    2) I have a table containing the search help information
    3) I assigned a search help to the custom field
    4) I have activated a search help exit
    The problem is that the information that I get from the custom field is not sufficient for making the selection. Therefore, I would like to somehow get hold of the addition information, such as BEGDA, ENNDA, MOLGA, to do a proper selection in the search help exit. How can I achieve that?
    I read something about function module DYNP_VALUES_READ -would it be possible to call this function module from my search help exit and thereby reach my goal?
    /Elvez
    Message was edited by: Elvez

  • How to prepopulate value in webapps input fields or for any custom fields in for any other forms?

    How to prepopulate value in webapps input fields or for any custom fields in for any other forms?

    What do you want to populate the form with?

  • How to maintain change history for a custom field

    Hi All,
    I have added a new custom field in standard table FKKVKP by appending a new structure to FKKVKP. Now this custom field will appear in transaction CAA2. My requirement is I have to maintain change history for my custom field. In transaction SCDO I have seen that there is an object MKK_VKONT that maintains change history for FKKVKP entries. But I am not aware how to adjust this field so that SAP generates change history for my custom field as well.
    Thanks in advance,
    Venkat

    Venkatesh,
    DFKKTAXEX
    FKKVK
    FKKVKP
    FKKVK_CORR
    I have never used these tables but I have working experience with change docs.
    The Z field which you have added should be in the above structures, then you should be able to see that field in the changes.
    Of course change document should be set to that field-data element.

  • How to chage the display name in SC browser for the custome fields?

    Hi,
    I created 2 custom fields for Shopping cart in SRM. How to chage the display name in SC browser for this custome fields?
    Thanks
    Kevin

    Hi Kevin,
    when you have defined your customer fields, you have created new fields in the CUF structures. The labels displayed on the SC screen come from the data element you have assigned to those cust fields in the include structure.
    If you have used a std data element, then you can change its translation (attention, this will impact all structures, tables... abap objects using this data element).
    If you have created a Z data element, then adapt its description accordingly.
    Rgds
    Christophe
    PS: please reward points for helpfull answers

  • SRM Portal - Search help for a custom field

    Hi,
    I have added a custom field to the SRM Portal (5.0) shopping cart, by adding the field to structures INCL_EEW_PD_ITEM_CSF INCL_EEW_PD_ITEM_CSF_SC.
    However, I need to filter the search help for that custom field, based on values & relationships stored in a Z table.
    Is this possible? How? Please help.
    Thank You.

    Currently, my idea would be to create a search help for the custom field & filter the values in a search help exit. However, would I be able to get other field values (standard) from SRM into my search help exit?

  • BSP: F4 Help For a custom field...

    Hi All,
    I need to display search help for a custom field in one of my custom view.
    Search Help for the custom field is already implemented.. but how can i use it in BSP View!.
    In the standard CRM_IC application i couldn't find any similar search help scenario, coz it is calling some standard methods like ShowF4KeyAndValueHelp3,
    ICWCShowF4HelpExtern by passing the structure and field name!.
    I think these standard methods will work only with the fields which have value help table at the data element level. As the custom field that i m using does not have any value help i cant go for this method i guess!.
    Any Help/Hint?..
    Thank You,
    sudeep v d.

    Hello Sudeep,
    Here are some more helpful links .Please refer them .
    Re: Inputfield value for a tableView from a help window
    /people/thomas.jung3/blog/2005/08/22/bsp-value-input-help-popups-version-30
    F4 help using javascript
    Please let me know the feedback.
    Warm Regards,
    Rakesh Kumar Verma

  • Screen Exit for adding custom fields in Additional Data tab in ME21N

    I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
    I also need a similar exit for adding a filed at item level.
    Thanks in advance
    Martin

    Hello,
    1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
    please check it for VA02
    SPRO u2013 SAP Reference IMG ---  Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
    1)Screen group                                  description
            zs                                           creating badi      --- (save)
           click on (label tab pages) u2013 new entries
           number u2013 10 , function code u2013 zs10 ,  description u2013 func ---(save) u2013(back)
    2)select (FM_CUSTOMER_ADD) u2013 copy
         Implementation name u2013 ZAS
         (desc u2013 impl for cust) u2013 (save)
        interfaceu2014(check_add_on_active) double click on it
    3)the above screen appear --  write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
         -- (activate) u2013 (back)
       Business adds in customer sub screens
    4)select (FM_CUSTOMER_ADD) u2013 copy
         Implementation name u2013 ZAS1
         (description -- cust) u2013 in attribute u2013 (give screen group name)
    5)go to interfaces (GET_TAXI_SCREEN)  double click on it
       (save)  --- (activate) 
    6)(SAVE)  -- 
        Goto SE38  -- CREATE PROGRAM WITH NAME (ZQW) type module pool
         Goto SE51  -- Prog : ZQW
           Screen : 200 (Create)
          Goto layout u2013 design the screen
    7)save u2013 activate
       then goto transaction : va02
    For User Exit's
    goto to tcode->status->program name->double click on that,
    then goto to-> attribute take the package name and
    Goto SMOD tcode ->Utilities->give the package name and F8
    then a list of exits will display for that tcode as well as that package.
    u can check the table MODSAP
    u can check the table MODACT
    For BADI's,
    1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
    keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
    then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
    2)Goto to tcode->status->program name->double click on that program will display's
    then  press crtl+F then cl_exithandler
    Thank u ,
    santhosh

  • How to set a default date for a custom field of Date type in project server 2010.

    hi,
    can somebody help  me.
    How Can i set the default date for a custom field of date type in project server 2010 ?

    Dear Rohan,
    You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
    Regards,
    Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

  • Error using Bapi_PO_Change for update custom fields

    Dear Expert,
    I have requirement for update custom field in table ekko. I used BAPI_PO_CHANGE with PO_number as a key. Then i put the value of custom field in segment TABLES - EXTENSIONIN.
    But I get error : "ERROR TRANSFERING EXTENSIONIN DATA FOR ENHANCEMENT CI_EKKODB".
    When I checked, I found the difference between data type the value for BAPI_PO_CHANGE (Usinf structure BAPIPAREX) and data type for custom field in table EKKO.
    Data Type in BAPI_PO_CHANGE is CHAR (you can see in structure BAPIPAREX). And data type for the custom field is DECIMAL.
    I found the note '1124803', but the correction note was not applicable for us because our released system is 500.
    Is there any suggestion or solution for resolve our problem?
    Really appreciate your help.
    Thanks.

    Hi Laxmikanth Bethi ,
    I tried with BAPI_PO_CHANGE in level header, and SAP was support the BAPI. And also i tried to appending the same fields in MEPOHEADR & MEPOHEADERX structures, but the problem is the type of my custom fields are DECIMAL, then the type MEPOHEADR & MEPOHEADERX structures are CHARACTER. So i got the error :  "ERROR TRANSFERING EXTENSIONIN DATA FOR ENHANCEMENT CI_EKKODB".
    Because the types are difference.
    Have you any suggestion to solve this problem?
    Really appreciate for your input.

  • How long does it take for the custom field created in SFDC to show up in the field mapping list?

    How long does it take for the custom field created in SFDC to show up in the field mapping list? I hit the refresh field button, but it is not showing up after 5 min. Do I just need to have patience? 

    Hi,
    What do you have to do to the field in SFDC to make it accessible so that it shows up in the Eloqua field mapping area as a field to be mapped?   

  • Mass maintenance and BDC Recodring of custom fields added in PO header.

    Hello Experts,
    I have created a custom fields in PO header and used  Structure for BADI implementation to update the header with values enterd in custom table.
    My requirement is for some selected PO i want to fix the value of one of my custom field at header level.
    I have tried both the options Mass maintenance and BDC recording but the issue i'm facing is when i go for mass maintenance it is giving me the ERROR and it seems that we can only do the mass maintenance for sap-standard fields only.
    When i go for BDC recording i'm facing the issue that when i do SHDB and start recording  for ME22N my custom field is coming  grayed out and i'm not able to input the desired value in custom field and complete my recording.
    Let me know your valuable inputs .
    Thanks,
    Naveen

    Hello,
    Instead of BDC i'm doing it through the BAPI   "BAPI_PO_CHANGE" by populating the structure extensionin but here i'm facing the error as below:-
    W     ME     887     Error transferring ExtensionIn data for enhancement CI_EKKODB
    E     BAPI     003     Instance 4500001544 of object type PurchaseOrder could not be changed
    below is my code:-
    ls_extensionin-structure = 'BAPI_TE_MEPOHEADER'.
        ls_extensionin-valuepart1+0(10) = wa_po-ebeln.
        ls_extensionin-valuepart1+14(3) = no.
        append ls_extensionin to lt_extensionin.
        clear:ls_bapi_te_bg,ls_extensionin.
        ls_extensionin-structure = 'BAPI_TE_MEPOHEADERX'.
        ls_extensionin-valuepart1+0(10) = wa_po-ebeln.
        ls_extensionin-valuepart1+10(1) = 'X'.
        append ls_extensionin to lt_extensionin.
        clear:ls_bapi_te_bg,ls_extensionin.
        call function 'BAPI_PO_CHANGE'
            exporting
              purchaseorder                = wa_po-ebeln
            tables
              return                       = it_bapireturn
              extensionin                  = lt_extensionin
        if it_bapireturn[] is initial.
          call function 'BAPI_TRANSACTION_COMMIT'
            exporting
              wait   = ' '
            importing
              return = it_bapireturn.
        endif.
        refresh lt_extensionin[].
      endloop.
    Please let me know if there is any way to achieve this.
    Thanks,
    naveen

  • Screen exit/BADI for adding custom field in IW31/IW32

    Hi all,
    The requirement is to add the permit field in the Header component of IW31. Searched SDN and found user exit IWO10018 for the same which includes a screen exit.
    The activation of the same is adding a tab in the screen while user wants the field under header Component tab.
    How this can be done. Any suggestion.
    Thanks
    anya

    Hi,
      You can perform append structure to add your custom field(s)in VBAP table. Next step, go to SE51 (Screen Painter)to modify SAP Program SAPMV45A Screen number 4459 for Additional data A or Screen number 8459 for Additional data B to add your append structure custom fields.
    Once the above steps done, you can place your logic to populate custom fields in include program MV45AFZZ. i.e USEREXIT_MOVE_FIELD_TO_VBAP.
    At the end, please ensure all program and screen are activated. Hope this will help.
    Regards
    Kiran Sure

  • How to set max size for a custom field ucm11g

    Hi,
    I need to set maximum length to a custom field created in ucm11g 11.1.1.6
    The field's data type is Text and for example i want to limit the length to 10 characters
    Any example how to do this ??
    Regards
    Carlos

    Hi ,
    If you are looking to limit the number of characters that can be entered to the field from GUI then a global side effect and rule combination will help you achieve it . It would be something like this :
    This is done by leveraging Side Effects under Rules - Rules Activation Conditions. You also need to set the Rule as Global for this to be effective across the system.
    In there the following has to be set:
    <$dDocTitle:maxLength=80$>
    <$dDocName:maxLength =50$>
    Set the above side effect in the rules and corresponding Profile need to refer it for being able to limit the number of characters that can be entered for Title and Content ID.
    Custom metadata too can be controlled in the same way . For example, if metadata "Version" need to limit the number of characters being entered then "Side Effects" to be set is as follows :
    <$xVersion:maxLength=50$>
    NB - the maxLength parameter is not supported for fields of type Memo. It will only take effect on standard text fields.
    Thanks,
    Srinath

  • Design Question for a Custom Field

    I am designing a custom Field, GridField, that creates a grid of n X m cells. Each column has a width, each row has a height, and each cell cell can have a color, border, text, and font. My question deals with how to treat the borders of the cell. It is a design trade off question, so I am interested in your viewpoint as a developer and how you would expect this GridField to work.
    Say I need a 3 X 3 grid with the columns 30 pixels wide and rows 20 pixels tall. The entire field is 60 pixels X 90 pixels in size. Now, if I add a vertical border on the sides and in between each column and that border has a width - say 2 pixels. What type of behavior would you expect from this Field:
    Option A. The cell remains 20 pixels X 30 pixels in size. The entire Field grows in size by the border width - so with three columns and a 2 pixel border, the GridField is now 90 + 4 borders X 2 pixels = 98 pixels wide. If I add a similar horizontal border, then the GridField is now 60 pixels + 8 pixels for the border = 68 pixels tall.
    Option B. Each cell is reduced in size by the border - so now the cells are 18 pixels tall and 28 pixels wide.
    These options become more interesting when you consider putting a border around just one cell in the grid. Are the border widths added to all the cells in the row and column of this cell, or are the border widths subtracted from the one cell that has the borders?
    Thanks for your thought!
    Mark
    P.S. Why am I doing this? I could accomplish the same thing using a TableLayoutManager and LabelFields. However, if I have a 10 X 10 grid, that means I have to create 100 LabelFields. With this approach, I only create one object and a more "robust" paint method. I believe I am making a smaller widget to accomplish the same task.
    P.P.S. I am currently using this GridField in a Blackberry development project, but it also has application in any MIDP project.

    I am designing a custom Field, GridField, that creates a grid of n X m cells. Each column has a width, each row has a height, and each cell cell can have a color, border, text, and font. My question deals with how to treat the borders of the cell. It is a design trade off question, so I am interested in your viewpoint as a developer and how you would expect this GridField to work.
    Say I need a 3 X 3 grid with the columns 30 pixels wide and rows 20 pixels tall. The entire field is 60 pixels X 90 pixels in size. Now, if I add a vertical border on the sides and in between each column and that border has a width - say 2 pixels. What type of behavior would you expect from this Field:
    Option A. The cell remains 20 pixels X 30 pixels in size. The entire Field grows in size by the border width - so with three columns and a 2 pixel border, the GridField is now 90 + 4 borders X 2 pixels = 98 pixels wide. If I add a similar horizontal border, then the GridField is now 60 pixels + 8 pixels for the border = 68 pixels tall.
    Option B. Each cell is reduced in size by the border - so now the cells are 18 pixels tall and 28 pixels wide.
    These options become more interesting when you consider putting a border around just one cell in the grid. Are the border widths added to all the cells in the row and column of this cell, or are the border widths subtracted from the one cell that has the borders?
    Thanks for your thought!
    Mark
    P.S. Why am I doing this? I could accomplish the same thing using a TableLayoutManager and LabelFields. However, if I have a 10 X 10 grid, that means I have to create 100 LabelFields. With this approach, I only create one object and a more "robust" paint method. I believe I am making a smaller widget to accomplish the same task.
    P.P.S. I am currently using this GridField in a Blackberry development project, but it also has application in any MIDP project.

Maybe you are looking for

  • SharePoint Designer 2013 cannot access workflows in Office 365 Site

    I have an Office 365 SharePoint site with a number of workflows that I have created on my machine with SPD 2013. After a number of weeks I was unable to access the workflows from my machine through SPD (while still being able to access pages, site as

  • The macro  "repoNewquery cannot be found" in SAP BW BEx

    Hi, when i attempt to open BEx analyzer, the following error message is displayed in SAP BW 3.5 NW platform. "c:\programfiles\SAP\frontend\BW\SAPbex.xla!repoNewquery' cannot be found. I tried in the tool menu bar of MS excel to change the security st

  • Yosemite install has messed up my home folder after fixing user short name.

    I just installed Yosemite 10.10.2 onto a new Mac Pro, replacing 10.9.5.  After the installation completed, I allow my iCloud settings the set things up for Mail and my other general account settings.  The only issue is that when I changed my short na

  • How can I change my Skype-to-Go Number?

    Hi Dear all, Can somebody tell me, how can i change my own skype to go number? Someone block me, and i would like to try call her with different dumber. Thank you This post was transferred from its previous location to create its own new topic here;

  • What is included in the "other" category on iphone?

    when looking at the storage space available on my iphone, there is a large amount of space taken up by "other" (almost 2 GB an dI only have 16 GB). I want to add other things to my phone, but I don't have enough space. The "Other" category only seems