BDC MATERIAL MASTER DATA CONVERSION

HELLO ABAP GURUS,
CAN U PLZ SOLVE MY PROBLEM.
I'M TRING TO CONVERT LEGACY DATA TO SAP FOR TCODE MM01
IN MM01 ALL THE FIELDS I'M ABLE TO ENTER BUT DURING ENTERING DATA OF EAN(IN BASIC DATA 1) SYSTEM SHOWING WARNING MESSAGE TO SKIP THIS WARNING WE HAVE TO PRESS ENTER KEY THEN ONLY IT IS PROCESSING.
MAIN PROBLEM IS THAT I WANT TO GIVE ONE EXTRA ENTER AFTER EXECUTING THE FOLLOWING CODE
perform bdc_dynpro      using 'SAPLMGMM' '4004' 'X'.
perform bdc_field       using 'BDC_OKCODE'                              '/00'.
perform bdc_field       using 'MAKT-MAKTX'                              matdesc.
perform bdc_field       using 'BDC_CURSOR'                              'MARA-MTPOS_MARA'.
perform bdc_field       using 'MARA-MEINS'                             wa_valid-MEINS.
perform bdc_field       using 'MARA-MATKL'                             wa_valid-MATKL.
perform bdc_field       using 'MARA-BISMT'                             wa_valid-BISMT.
perform bdc_field       using 'MARA-SPART'                              wa_valid-SPART.
perform bdc_field       using 'MARA-PRDHA'                              wa_valid-PRDHA.
perform bdc_field       using 'MARA-MTPOS_MARA'                         wa_valid-MTPOS_MARA.
perform bdc_field       using 'MARA-BRGEW'                              wa_valid-BRGEW.
perform bdc_field       using 'MARA-GEWEI'                              wa_valid-GEWEI.
perform bdc_field       using 'MARA-NTGEW'                              wa_valid-NTGEW.
perform bdc_field       using 'MARA-VOLUM'                              wa_valid-VOLUM.
perform bdc_field       using 'MARA-VOLEH'                              wa_valid-VOLEH.
*perform bdc_field       using 'MARA-EAN11'                              wa_valid-EAN11.
perform bdc_field       using 'MARA-NUMTP'                              wa_valid-NUMTP.
AFTER THIS CODE I WANT TO GIVE A CODE TO PRESS ENTER CAN U PLZ TELL ME.
*perform bdc_field       using 'BDC_OKCODE'                              '=ENTR'. THIS CODE IS NOT WORKING
REGARDS,
MANOJ
9248158131

MESSAGE IM GETTING
THE EAN WILL BE DETERMINED INTERNALLY ON THE BASIS OF THE EAN CATEGORY
AND ASSIGNING EAN/UPC NO INTERNALLY ON THE BASIS OF EAN CATEGORY

Similar Messages

Requirement in conversion of material master data

i have a requirement in conversion of material master data, what do i need to do in this, do i need to use the LSMW or BDC for this scenario can any one help me in this issue.

Hi Rocky,
You can go for either of these two methods.Conversion in the sense you are going to create one upload program for MM01 and will upload the data using the program
But I suggest go for BDC.Because in LSMW you can not capture all the views for material master.
I am writing steps(BDC recording) for this.Just follow if helpful:
1.Go to SHDB t-code.
2.Press NEW RECORDING
3.enter recording name,Transaction code(MM01) and then press Start recording.
This will take you to the transaction MM01,please enter the test data given by your functional consultant.Also select the views that required by client.
4.After recording save it.
5.After saving press program button from the menu.
6.This will take you SE38 with the recording code.
7.Then you do as per normal BDC program,declare internal table and map with the uploaded fields.
Shout me for further clarification.
Reward if helpful.
Thank you.

Update material master data BAPI_MATERIAL_SAVE DATA

Hi All,
I am using BAPI_MATERIAL_SAVE DATA Fm to update the material master data .
I want to change material type vend (which already existed) to HIBE material type .
Even though Basic data view populated its not updating in Material master .
Which views do i need to populate to change material type one value to other value?

if you use FM - BAPI_MATERIAL_SAVE DATA ,you can not update material type , use bdc program to update material type ,
See the transaction : MMAM - No BAPI to update material type
you need to use BDC Program.
Reward Points if it is helpful
Thanks
Seshu

Uploading Material Master data from legacy system

Hi all,
do we have any sap defined bdc for material master data ,if no ho to do that can anybody explain me step by step procedure how to do that
Thanks in advance
Santosh R

Santosh,
Use BAPI as we already have pre-defined BAPI for material upload given by SAP.
<b>BAPI_MATERIAL_SAVEDATA</b>
Also check this BAPI in MM01 uploading for the complete code I have written.
Regards
Aneesh.

Material Master Data load failed

Hi All,
I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
Best Regards,
Nene.

hi Nene/Sankar,
for material text no language please check Note 546346 - Material texts: no selection on languages
and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
hope this helps.
Note 546346 - Material texts: no selection on languages
Summary
Symptom
When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
Other terms
DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
Reason and Prerequisites
As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
Solution
As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
Import
Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
Support Package 3 for PI 2002_1_470
In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
Note 561880 - Requests hang because IDocs are not processed
Symptom
Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
After a timeout, the request status finally switches to 'Red'.
Information IDocs with the status '64' are displayed in the 'Detail' tab.
Other terms
IDoc, tRFC, ALE, status 64
Reason and Prerequisites
Status information on load requests is transferred in the form of IDocs.
IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
You must therefore analyze the status text.
Solution
We recommend asynchronous processing for Business Warehouse.
To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
TIP: Also check transaction SM58 for problematic tRFC entries.
IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems.

What is procedure for creating new vendor and material master data in ABAP

What is procedure for creating new vendor and material master data in ABAP .

see below code which is used for creation of vendor master as well as extension...
*& Report ZFC_VENDOR_CREATE                                           *
REPORT ZFC_VENDOR_CREATE LINE-SIZE 100
                           NO STANDARD PAGE HEADING
                           MESSAGE-ID ZZ.
                     TABLES
TABLES : SSCRFIELDS.   " Fields on selection screens
                     CONSTANTS
DATA : C_SPLIT TYPE C VALUE '#'. " Used for Has Separator in GUI_UPLAOD
                     TYPES
Int'table to hold Vendor Master Data
TYPES : BEGIN OF TY_VENDOR_MASTER,
          FLAG TYPE C,               " Update Flag
          LIFNR TYPE LIFNR,           " Vendor Number
          BUKRS TYPE BUKRS,           " Company Code
          KTOKK TYPE KTOKK,           " Account Group
          ANRED TYPE ANRED,           " Title
          NAME1 TYPE NAME1_GP,        " Name1
          NAME2 TYPE NAME2_GP,        " Name2
          SORTL TYPE SORTL,           " Search Term 1
          SORT2 TYPE AD_SORT2UL,      " Search Term 2
          STRAS TYPE STRAS_GP,        " Street
          PSTLZ TYPE PSTLZ,           " Postal Code
          ORT01 TYPE ORT01_GP,        " City
          REGIO TYPE REGIO,           " Region
          LAND1 TYPE LAND1_GP,        " Country
          SPRAS TYPE SPRAS,           " Language
          VBUND TYPE RASSC,           " Trading Partner
          BANKS TYPE BANKS,           " Country
          BANKL TYPE BANKK,           " Bank Key
          BANKN TYPE BANKN,           " Bank Account
          BKONT TYPE BKONT,           " Bank Control Key
          BANKA TYPE BANKA,           " Name of Bank
          AKONT TYPE AKONT,           " Reconciliation Account
          FDGRV TYPE FDGRV,           " Cash Management Group
          ZTERM TYPE DZTERM,          " Payment Terms
          REPRF TYPE REPRF,           " Check Double Invoice
          ZWELS TYPE DZWELS,          " Payment Methods
          XPORE TYPE XPORE,           " Pay all items separately
        END   OF TY_VENDOR_MASTER,
Int'table to hold Vendor Extend Data
        BEGIN OF TY_VENDOR_EXTEND,
          FLAG TYPE C,               " Update Flag
          LIFNR     TYPE LIFNR,           " Vendor Number
          BUKRS     TYPE BUKRS,           " Company Code
          KTOKK     TYPE KTOKK,           " Account Group
          REF_LIFNR TYPE LIFNR,           " Reference Vendor Number
          REF_BUKRS TYPE BUKRS,           " Reference Company Code
          AKONT     TYPE AKONT,           " Reconciliation Account
          FDGRV     TYPE FDGRV,           " Cash Management Group
          ZTERM     TYPE DZTERM,          " Payment Terms
          REPRF     TYPE REPRF,           " Check Double Invoice
          ZWELS     TYPE DZWELS,          " Payment Methods
          XPORE TYPE XPORE,           " Pay all items separately
        END   OF TY_VENDOR_EXTEND,
Int'table to hold Error Records Data
        BEGIN OF TY_ERROR,
          MSG(200) TYPE C,                " To hold Message
          LIFNR    TYPE LIFNR,            " Vendor Number
          BUKRS    TYPE BUKRS,            " Company Code
        END   OF TY_ERROR.
                     DATA (Simple Fields)
DATA : W_COUNT TYPE I,               " Variable to hold count of Records
       W_SUCC_REC TYPE I,            " No. of Success Records
       W_SUCC_REC1 TYPE I,           " No. of Updated Records
       W_ERR_REC TYPE I,             " No. of Error Records
       w_noupdate_rec type i.        " No. of Records not Changed
                     INTERNAL TABLES
Int'table to hold uploaded data from File
DATA : IT_VENDOR_MASTER    TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
       WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
       IT_VENDOR_EXTEND    TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
       WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
       WA_IT_BDCDATA       TYPE BDCDATA,
       IT_BDCDATA          TYPE STANDARD TABLE OF BDCDATA,
       WA_IT_MESSTAB       TYPE BDCMSGCOLL,
       IT_MESSTAB          TYPE STANDARD TABLE OF BDCMSGCOLL,
       IT_ERROR            TYPE STANDARD TABLE OF TY_ERROR,
       WA_IT_ERROR         TYPE TY_ERROR,
       it_error_fk01       type standard table of ty_error,
       wa_it_error_fk01    type ty_error,
       it_error_fk02       type standard table of ty_error,
       wa_it_error_fk02    type ty_error,
       it_succ_rec1        type standard table of ty_error,
       wa_it_succ_rec1     type ty_error,
       it_noupdate         type standard table of ty_error,
       wa_it_noupdate      type ty_error.
                     FLAGS
DATA : FL_FLAG1 TYPE C,          " Flag to check error upload file
       FL_FLAG2 TYPE C,          " Flag to hold value
       FL_FLAG3 TYPE C,          " Flag to hold value
       FL_FLAG4 TYPE C.          " Flag to hold value
                     SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-001,
            POSITION POS_LOW.
PARAMETERS :       P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-002,
            POSITION POS_LOW.
PARAMETERS :       P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-003,
            POSITION POS_LOW.
PARAMETERS :       P_VENEXT RADIOBUTTON GROUP R1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-004,
            POSITION POS_LOW.
PARAMETERS :       P_MODE(1) DEFAULT 'N'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-005,
            POSITION POS_LOW.
PARAMETERS :       P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-016,
            POSITION POS_LOW.
PARAMETERS :       P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
                     AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Form to get file path for upload of data
PERFORM GET_FILE_PATH.
AT SELECTION-SCREEN ON BLOCK B1.
Form to Validate data specified on Selection Screen
CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
PERFORM VALIDATE_DATA.
                     START - OF - SELECTION
START-OF-SELECTION.
IF P_VENMAS = 'X'.
Form to upload data from Presentation Server for Vendor Master
    PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
    IF FL_FLAG1 NE 'X'.
      SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
      DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
                              AND   BUKRS = ' '
                              AND   KTOKK = ' '.
Form to process data for Vendor Master
      PERFORM INSERT_VENDOR_MASTER_DATA.
    ENDIF.
ELSEIF P_VENEXT = 'X'.
Form to upload data from Presentation Server for Vendor Extend
    PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
    IF FL_FLAG1 NE 'X'.
      SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
      DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
                              AND   BUKRS = ' '
                              AND   KTOKK = ' '.
Form to process data for Vendor Master
      PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
    ENDIF.
ENDIF.
                     END - OF - SELECTION
END-OF-SELECTION.
IF FL_FLAG1 NE 'X'.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O01.           " Total Number of records read :
    FORMAT COLOR OFF.
    WRITE:40 W_COUNT.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O02.           " Total Number of Success records :
    FORMAT COLOR OFF.
    WRITE:40 W_SUCC_REC.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O07.           " Total Number of Updated records :
    FORMAT COLOR OFF.
    WRITE:40 W_SUCC_REC1.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O08.           " Total Number of Unchanged records :
    FORMAT COLOR OFF.
    WRITE:40 W_noupdate_REC.
    FORMAT COLOR 7.
    WRITE:/2 TEXT-O03.           " Total Number of Error records :
    FORMAT COLOR OFF.
    WRITE:40 W_ERR_REC.
    if not it_succ_rec1 is initial.
      skip 1.
      perform display_changed_report.
    endif.
    if not it_noupdate is initial.
      skip 1.
      perform display_nochange_report.
    endif.
    IF NOT IT_ERROR IS INITIAL.
      SKIP 3.
Form to display error data
      PERFORM DISPLAY_ERROR_REPORT.
    ENDIF.
    IF FL_FLAG2 = 'X'.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/2 TEXT-O04.        " BDC Session Name for Creation (FK01) :
      FORMAT COLOR OFF.
      WRITE:40 P_GROUP.
      perform display_error_report_fk01.
    ENDIF.
    IF FL_FLAG3 = 'X'.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/2 TEXT-O09.        " BDC Session Name for Updation (FK02) :
      FORMAT COLOR OFF.
      WRITE:40 P_GROUP1.
      perform display_error_report_fk02.
    ENDIF.
ENDIF.
*&      Form GET_FILE_PATH
This form is used to get the specified path for uploading of data from
flat file with the help of F4 function key
FORM GET_FILE_PATH .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = ' '
    IMPORTING
      FILE_NAME     = P_FILE.
ENDFORM.                    " GET_FILE_PATH
*&      Form VALIDATE_DATA
This form is used to validate the data given by user on the Selection
Screen and the appropriate message is been displayed when an wrong
entry is inputted
FORM VALIDATE_DATA .
IF SY-BATCH EQ 'X'.
    CLEAR SSCRFIELDS-UCOMM.
    MESSAGE E001(ZZ) WITH TEXT-011.
    " Excel file not to be used in Batch Mode
ENDIF.
IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
    MESSAGE E001(ZZ) WITH TEXT-012.
    " Session Mode should be either A or N or E
ENDIF.
ENDFORM.                    " VALIDATE_DATA
*&      Form UPLOAD_DATA
This form is used to upload data from Presentation Server for either
Vendor Master or Vendor Extend
FORM UPLOAD_DATA TABLES P_IT_VENDOR.
DATA : L_FILENAME TYPE STRING,
         L_FILETYPE TYPE CHAR10 VALUE 'ASC',
         L_HEADER_LENGTH TYPE I VALUE 0,
         L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
MOVE P_FILE TO L_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = L_FILENAME
      FILETYPE                = L_FILETYPE
      HEADER_LENGTH           = L_HEADER_LENGTH
      READ_BY_LINE            = L_READ_BY_LINE
      HAS_FIELD_SEPARATOR     = C_SPLIT
    TABLES
      DATA_TAB                = P_IT_VENDOR
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
IF SY-SUBRC <> 0.
   MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    FL_FLAG1 = 'X'.
ELSEIF P_IT_VENDOR[] IS INITIAL.
    MESSAGE I001(ZZ) WITH TEXT-014.   " Uploaded File contains no data
    FL_FLAG1 = 'X'.
ENDIF.
ENDFORM.                    " UPLOAD_DATA
*&      Form INSERT_VENDOR_MASTER_DATA
This form is used to process BDC data for Vendor Master
FORM INSERT_VENDOR_MASTER_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR.
sort it_vendor_master by flag.
LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
    W_COUNT = W_COUNT + 1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = WA_IT_VENDOR_MASTER-LIFNR
      IMPORTING
        OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
    if wa_it_vendor_master-flag = 'A'.
    SELECT SINGLE LIFNR
           FROM LFB1
           INTO L_LIFNR
           WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
           AND   BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    IF SY-SUBRC EQ 0.
      WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
      WA_IT_ERROR-MSG   = TEXT-015.
      APPEND WA_IT_ERROR TO IT_ERROR.
      W_ERR_REC = W_ERR_REC + 1.
      CLEAR : WA_IT_ERROR, L_LIFNR.
    ELSE.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_MASTER.
      PERFORM CALL_TRANSACTION.
    ENDIF.
    CLEAR : WA_IT_VENDOR_MASTER.
    elseif wa_it_vendor_master-flag = 'C'.
      IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
        PERFORM CLOSE_BDC_SESSION.
        fl_flag4 = 'X'.
      ENDIF.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_MASTER.
      PERFORM CALL_TRANSACTION_FK02.
      CLEAR : WA_IT_VENDOR_MASTER.
    elseif wa_it_vendor_master-flag = 'N'.
      WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
      WA_IT_noupdate-MSG   = TEXT-018.
      APPEND WA_IT_noupdate TO IT_noupdate.
      W_noupdate_REC = W_noupdate_REC + 1.
      CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
    endif.
ENDLOOP.
IF FL_FLAG3 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM.                    " INSERT_VENDOR_MASTER_DATA
*&      Form POPULATE_BDC_DATA_VEN_MASTER
This form is used to populate BDC data of Vendor Master
FORM POPULATE_BDC_DATA_VEN_MASTER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_IT_VENDOR_MASTER-ZTERM
    IMPORTING
      OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
    WA_IT_VENDOR_MASTER-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
    WA_IT_VENDOR_MASTER-XPORE = 'X'.
ENDIF.
if wa_it_vendor_master-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
           BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_master-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
           BDC_FIELD USING 'BDC_OKCODE' '=MALL',
           BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-D0110' 'X',
           BDC_FIELD USING 'RF02K-D0120' 'X',
           BDC_FIELD USING 'RF02K-D0130' 'X',
           BDC_FIELD USING 'RF02K-D0210' 'X',
           BDC_FIELD USING 'RF02K-D0215' 'X',
           BDC_FIELD USING 'RF02K-D0220' 'X',
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
           BDC_FIELD USING 'LFA1-ANRED' WA_IT_VENDOR_MASTER-ANRED,
           BDC_FIELD USING 'LFA1-NAME1' WA_IT_VENDOR_MASTER-NAME1,
           BDC_FIELD USING 'LFA1-NAME2' WA_IT_VENDOR_MASTER-NAME2,
           BDC_FIELD USING 'LFA1-SORTL' WA_IT_VENDOR_MASTER-SORTL,
           BDC_FIELD USING 'LFA1-STRAS' WA_IT_VENDOR_MASTER-STRAS,
           BDC_FIELD USING 'LFA1-ORT01' WA_IT_VENDOR_MASTER-ORT01,
           BDC_FIELD USING 'LFA1-PSTLZ' WA_IT_VENDOR_MASTER-PSTLZ,
           BDC_FIELD USING 'LFA1-LAND1' WA_IT_VENDOR_MASTER-LAND1,
           BDC_FIELD USING 'LFA1-REGIO' WA_IT_VENDOR_MASTER-REGIO,
           BDC_FIELD USING 'LFA1-SPRAS' WA_IT_VENDOR_MASTER-SPRAS,
           BDC_FIELD USING 'BDC_OKCODE' '/00',
           BDC_DYNPRO USING 'SAPMF02K' '0120',
           BDC_FIELD USING 'LFA1-VBUND' WA_IT_VENDOR_MASTER-VBUND,
           BDC_FIELD USING 'BDC_OKCODE' '/00',
           BDC_DYNPRO USING 'SAPMF02K' '0130',
           BDC_FIELD USING 'LFBK-BANKS(01)' WA_IT_VENDOR_MASTER-BANKS,
           BDC_FIELD USING 'LFBK-BANKL(01)' WA_IT_VENDOR_MASTER-BANKL,
           BDC_FIELD USING 'LFBK-BANKN(01)' WA_IT_VENDOR_MASTER-BANKN,
           BDC_FIELD USING 'BDC_OKCODE' '=BANK',
           BDC_DYNPRO USING 'SAPLBANK' '0100',
           BDC_FIELD USING 'BNKA-BANKA' WA_IT_VENDOR_MASTER-BANKA,
           BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
           BDC_DYNPRO USING 'SAPMF02K' '0130',
           BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
           BDC_DYNPRO USING 'SAPMF02K' '0210',
           BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_MASTER-AKONT,
           BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_MASTER-FDGRV,
           BDC_FIELD USING 'BDC_OKCODE' '=/00',
           BDC_DYNPRO USING 'SAPMF02K' '0215',
           BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_MASTER-ZTERM,
           BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_MASTER-REPRF,
           BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_MASTER-ZWELS,
           BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_MASTER-XPORE,
           BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM.                    " POPULATE_BDC_DATA_VEN_MASTER
*&      Form BDC_DYNPRO
This form is used to move data to BDCDATA int'table
FORM BDC_DYNPRO USING PROGRAM TYPE BDC_PROG
                       DYNPRO TYPE BDC_DYNR.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-PROGRAM = PROGRAM.
WA_IT_BDCDATA-DYNPRO   = DYNPRO.
WA_IT_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM.                    " BDC_DYNPRO
*&      Form BDC_FIELD
This form is used to move data to BDCDATA int'table
FORM BDC_FIELD USING FNAM TYPE ANY
                      FVAL TYPE ANY.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-FNAM = FNAM.
WA_IT_BDCDATA-FVAL = FVAL.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM.                    " BDC_FIELD
*&      Form CALL_TRANSACTION
This form is used to Call FK01 for processing of data either for
Vendor Master or Vendor Extend. The error records are inserted to
Session which can be processed using SM35
FORM CALL_TRANSACTION .
DATA : L_OPTION TYPE CTU_PARAMS,
         L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01'
       USING IT_BDCDATA
       MESSAGES INTO IT_MESSTAB
       OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
    W_SUCC_REC = W_SUCC_REC + 1.
ELSE.
    IF FL_FLAG2 NE 'X'.
      PERFORM OPEN_BDC_SESSION.
      FL_FLAG2 = 'X'.
    ENDIF.
    PERFORM BDC_INSERT.
    W_ERR_REC = W_ERR_REC + 1.
    PERFORM ERROR_RECORD_DATA.
ENDIF.
ENDFORM.                    " CALL_TRANSACTION
*&      Form OPEN_BDC_SESSION
Form used to open session for Error out Records
FORM OPEN_BDC_SESSION .
DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
         L_GROUP TYPE APQ_GRPN.       " Variable to hold value
MOVE P_GROUP TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT              = SY-MANDT
      GROUP               = L_GROUP
      KEEP                = SPACE
      USER                = L_USERID
    EXCEPTIONS
      CLIENT_INVALID      = 1
      DESTINATION_INVALID = 2
      GROUP_INVALID       = 3
      GROUP_IS_LOCKED     = 4
      HOLDDATE_INVALID    = 5
      INTERNAL_ERROR      = 6
      QUEUE_ERROR         = 7
      RUNNING             = 8
      SYSTEM_LOCK_ERROR   = 9
      USER_INVALID        = 10
      OTHERS              = 11.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-008.              " Unable to open BDC Session
ENDIF.
ENDFORM.                    " OPEN_BDC_SESSION
*&      Form BDC_INSERT
This form is used to insert error records to a Session method
FORM BDC_INSERT .
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE            = 'FK01'
    TABLES
      DYNPROTAB        = IT_BDCDATA
    EXCEPTIONS
      INTERNAL_ERROR   = 1
      NOT_OPEN         = 2
      QUEUE_ERROR      = 3
      TCODE_INVALID    = 4
      PRINTING_INVALID = 5
      POSTING_INVALID = 6
      OTHERS           = 7.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
ENDIF.
ENDFORM.                    " BDC_INSERT
*&      Form ERROR_RECORD_DATA
This form is used to process the messages for the error records which
will be displayed on the output report
FORM ERROR_RECORD_DATA .
DATA : L_LINES TYPE I,
         L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
    CLEAR L_MSG.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = WA_IT_MESSTAB-MSGID
        LANG      = SY-LANGU
        NO        = WA_IT_MESSTAB-MSGNR
        V1        = WA_IT_MESSTAB-MSGV1
        V2        = WA_IT_MESSTAB-MSGV2
        V3        = WA_IT_MESSTAB-MSGV3
        V4        = WA_IT_MESSTAB-MSGV4
      IMPORTING
        MSG       = L_MSG
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
      WA_IT_ERROR_fk01-MSG = L_MSG.
    ENDIF.
    IF P_VENMAS = 'X'.
      WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
    CLEAR WA_IT_ERROR_fk01.
ENDIF.
ENDFORM.                    " ERROR_RECORD_DATA
*&      Form CLOSE_BDC_SESSION
Form used to close session of the Error Records
FORM CLOSE_BDC_SESSION .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-010.             " Unable to Close BDC Session
ENDIF.
ENDFORM.                    " CLOSE_BDC_SESSION
*&      Form CHK_AND_INS_VENDOR_EXTEND_DATA
This form is used to process BDC data for Vendor Extend
FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR, fl_flag4.
sort it_vendor_extend by flag.
LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
    W_COUNT = W_COUNT + 1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR
      IMPORTING
        OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
    if wa_it_vendor_extend-flag = 'A'.
    SELECT SINGLE LIFNR
           FROM LFB1
           INTO L_LIFNR
           WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
           AND   BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
    IF SY-SUBRC NE 0.
      WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
      WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
      WA_IT_ERROR-MSG   = TEXT-007.
      APPEND WA_IT_ERROR TO IT_ERROR.
      W_ERR_REC = W_ERR_REC + 1.
      CLEAR : WA_IT_ERROR, L_LIFNR.
    ELSE.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          INPUT = WA_IT_VENDOR_EXTEND-LIFNR
        IMPORTING
          OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
      SELECT SINGLE LIFNR
             FROM LFB1
             INTO L_LIFNR
             WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
             AND   BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
      IF SY-SUBRC EQ 0.
        WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
        WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
        WA_IT_ERROR-MSG   = TEXT-015.
        APPEND WA_IT_ERROR TO IT_ERROR.
        W_ERR_REC = W_ERR_REC + 1.
        CLEAR : WA_IT_ERROR, L_LIFNR.
      ELSE.
        REFRESH IT_BDCDATA.
        CLEAR IT_BDCDATA.
        PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
        PERFORM CALL_TRANSACTION.
      ENDIF.
    ENDIF.
    CLEAR : WA_IT_VENDOR_EXTEND.
    elseif wa_it_vendor_extend-flag = 'C'.
      IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
        PERFORM CLOSE_BDC_SESSION.
        fl_flag4 = 'X'.
      ENDIF.
      REFRESH IT_BDCDATA.
      CLEAR IT_BDCDATA.
      PERFORM POPULATE_BDC_DATA_VEN_extend.
      PERFORM CALL_TRANSACTION_FK02.
       CLEAR : WA_IT_VENDOR_EXTEND.
    elseif wa_it_vendor_extend-flag = 'N'.
      WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
      WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
      WA_IT_noupdate-MSG   = TEXT-019.
      APPEND WA_IT_noupdate TO IT_noupdate.
      W_noupdate_REC = W_noupdate_REC + 1.
      CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
    endif.
ENDLOOP.
IF FL_FLAG2 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
if fl_flag3 = 'X'.
    PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM.                    " CHK_AND_INS_VENDOR_EXTEND_DATA
*&      Form POPULATE_BDC_DATA_VEN_EXTEND
This form is used to populate BDC data of Vendor Extend
FORM POPULATE_BDC_DATA_VEN_EXTEND .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_IT_VENDOR_EXTEND-ZTERM
    IMPORTING
      OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
    WA_IT_VENDOR_EXTEND-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_extend-XPORE = 'Y'.
    WA_IT_VENDOR_extend-XPORE = 'X'.
ENDIF.
if wa_it_vendor_extend-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
           BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
           BDC_FIELD USING 'RF02K-REF_LIFNR'
                                      WA_IT_VENDOR_EXTEND-REF_LIFNR,
           BDC_FIELD USING 'RF02K-REF_BUKRS'
                                      WA_IT_VENDOR_EXTEND-REF_BUKRS,
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_extend-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
           BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
           BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
           BDC_FIELD USING 'RF02K-D0210' 'X',
           BDC_FIELD USING 'RF02K-D0215' 'X',
           BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
           BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_EXTEND-AKONT,
           BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_EXTEND-FDGRV,
           BDC_FIELD USING 'BDC_OKCODE' '=/00',
           BDC_DYNPRO USING 'SAPMF02K' '0215',
           BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_EXTEND-ZTERM,
           BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_EXTEND-REPRF,
           BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_EXTEND-ZWELS,
           BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_extend-XPORE,
           BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM.                    " POPULATE_BDC_DATA_VEN_EXTEND
*&      Form DISPLAY_ERROR_REPORT
This form is used to display the error records on the output screen
FORM DISPLAY_ERROR_REPORT .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O05.            " Error List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O06.            " Error List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H03,              " Error Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR INTO WA_IT_ERROR.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_ERROR-LIFNR,
           17 SY-VLINE,
           18 WA_IT_ERROR-BUKRS,
           31 SY-VLINE,
           32 WA_IT_ERROR-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_ERROR.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
ENDFORM.                    " DISPLAY_ERROR_REPORT
*&      Form CALL_TRANSACTION_FK02
Form used to Call Transaction FK02
form CALL_TRANSACTION_FK02 .
DATA : L_OPTION TYPE CTU_PARAMS,
         L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK02'
       USING IT_BDCDATA
       MESSAGES INTO IT_MESSTAB
       OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
    W_SUCC_REC1 = W_SUCC_REC1 + 1.
    WA_IT_succ_rec1-MSG = Text-017.
    IF P_VENMAS = 'X'.
      WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
ELSE.
    IF FL_FLAG3 NE 'X'.
      PERFORM OPEN_BDC_SESSION_fk02.
      FL_FLAG3 = 'X'.
    ENDIF.
    PERFORM BDC_INSERT_fk02.
    W_ERR_REC = W_ERR_REC + 1.
    PERFORM ERROR_RECORD_DATA1.
ENDIF.
endform.                    " CALL_TRANSACTION_FK02
*&      Form OPEN_BDC_SESSION_fk02
Form used to Open session for FK02
form OPEN_BDC_SESSION_fk02 .
DATA : L_USERID TYPE APQ_MAPN,      " Variable to hold user-id
         L_GROUP TYPE APQ_GRPN.       " Variable to hold value
MOVE P_GROUP1 TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      CLIENT              = SY-MANDT
      GROUP               = L_GROUP
      KEEP                = SPACE
      USER                = L_USERID
    EXCEPTIONS
      CLIENT_INVALID      = 1
      DESTINATION_INVALID = 2
      GROUP_INVALID       = 3
      GROUP_IS_LOCKED     = 4
      HOLDDATE_INVALID    = 5
      INTERNAL_ERROR      = 6
      QUEUE_ERROR         = 7
      RUNNING             = 8
      SYSTEM_LOCK_ERROR   = 9
      USER_INVALID        = 10
      OTHERS              = 11.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-008.              " Unable to open BDC Session
ENDIF.
endform.                    " OPEN_BDC_SESSION_fk02
*&      Form BDC_INSERT_fk02
Form used to insert data into BDC session using FK02
form BDC_INSERT_fk02 .
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE            = 'FK02'
    TABLES
      DYNPROTAB        = IT_BDCDATA
    EXCEPTIONS
      INTERNAL_ERROR   = 1
      NOT_OPEN         = 2
      QUEUE_ERROR      = 3
      TCODE_INVALID    = 4
      PRINTING_INVALID = 5
      POSTING_INVALID = 6
      OTHERS           = 7.
IF SY-SUBRC <> 0.
    WRITE:/ TEXT-009.             " Unable to Insert Data to BDC Session
ENDIF.
endform.                    " BDC_INSERT_fk02
*&      Form display_changed_report
Form to display Updated Vendor data
form display_changed_report .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O10.          " Updated List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O11.          " Updated List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_succ_rec1-LIFNR,
           17 SY-VLINE,
           18 WA_IT_succ_rec1-BUKRS,
           31 SY-VLINE,
           32 WA_IT_succ_rec1-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_succ_rec1.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_changed_report
*&      Form display_nochange_report
Form to display No Changed data for Vendors
form display_nochange_report .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O12.       " No Changes List for Vendor Master
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O13.       " No Changes List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_noupdate INTO WA_IT_noupdate.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_noupdate-LIFNR,
           17 SY-VLINE,
           18 WA_IT_noupdate-BUKRS,
           31 SY-VLINE,
           32 WA_IT_noupdate-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_noupdate.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_nochange_report
*&      Form ERROR_RECORD_DATA1
Form to get Error Message for Changed Vendors
form ERROR_RECORD_DATA1 .
DATA : L_LINES TYPE I,
         L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
    CLEAR L_MSG.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = WA_IT_MESSTAB-MSGID
        LANG      = SY-LANGU
        NO        = WA_IT_MESSTAB-MSGNR
        V1        = WA_IT_MESSTAB-MSGV1
        V2        = WA_IT_MESSTAB-MSGV2
        V3        = WA_IT_MESSTAB-MSGV3
        V4        = WA_IT_MESSTAB-MSGV4
      IMPORTING
        MSG       = L_MSG
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
      WA_IT_ERROR_fk02-MSG = L_MSG.
    ENDIF.
    IF P_VENMAS = 'X'.
      WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
      WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
    ELSEIF P_VENEXT = 'X'.
      WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
      WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
    ENDIF.
    APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
    CLEAR WA_IT_ERROR_fk02.
ENDIF.
endform.                    " ERROR_RECORD_DATA1
*&      Form display_error_report_fk01
Form to display Error Report for Master Vendors (FK01)
form display_error_report_fk01 .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O05.     " Error List for Vendor Master (FK01)
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O06.     " Error List for Vendor Master Extended (FK01)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number
         17 SY-VLINE,
         18 TEXT-H02,              " Company Code
         31 SY-VLINE,
         32 TEXT-H04,              " Message
         100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
    FORMAT COLOR 2.
    WRITE:/1   SY-VLINE,
           2   WA_IT_ERROR_fk01-LIFNR,
           17 SY-VLINE,
           18 WA_IT_ERROR_fk01-BUKRS,
           31 SY-VLINE,
           32 WA_IT_ERROR_fk01-MSG,
           100 SY-VLINE.
    CLEAR : WA_IT_ERROR_fk01.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform.                    " display_error_report_fk01
*&      Form display_error_report_fk02
Form to display Error Report for changed Vendors (FK02)
form display_error_report_fk02 .
IF P_VENMAS = 'X'.
    WRITE:/ TEXT-O14.     " Error List for Vendor Master (FK02)
ELSEIF P_VENEXT = 'X'.
    WRITE:/ TEXT-O15.     " Error List for Vendor Master Extended (FK02)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1   SY-VLINE,
         2   TEXT-H01,              " Vendor Number

Extend material master data from one plant to another plant

hi,
how can i extend material master data from one plant to another plant.
is there any sap standard transaction for this ie. bdc/t-code.
thanks in advance.......
rahul

Hi
If you want to extend the material form one plant to another then below are the possible options.
1) MM01 - Use the material in the reference and fill in copy from and to then press enter to complete the extention.This is recommended only if you want to extend very less records.
2) Use LSMW and record MM01 thru BDC recording available in LSMW and make the template in excel and convert it to .txt tab delimited format to upload more records.LSMW is the perfect tool and is used extensively in all the projects.
3) Get the help from ABAPer to create upload program and include the BDC recording.
There is no standard T code available in SAP becoz data mainatenance in the material master will be based on the industry.
Hope it will help.
Thanks/Karthik

Material Master Data upload approach

Hi,
I have a requirement to upload material master data into D.B
1. Which is the best option to use - BDC/LSMW/BAPI(Program)/Direct upload program!
2. Based on Material types fields to be uploaded will change as per sample sheet,
Can we make use of single sheet With all fields in it(By removing common fields for all Mat.Types)!
Will BAPI - BAPI_MATERIAL_SAVEDATA useful for both MM01/MM02!
What is the better approach for the same!
Thanks,
Deep.

Hi,
I have 2 queations in addition to above.
1. If i write a program using above BAPI for material master data. Then will it be better approach than LSMW with BAPI?
In this case user will trigger Z tcode & he will select input file from desktop & execute & report log will be shown in the output with successful & unsuccessful materials.
2. I have to upload material master data. Now i have got sample files for Basic, Plant & Sales organization specific.
If i have single excel file (All fields in one single sheet/line) which covers all unique fields of material master related to diff Basic, Plant & Sales organization specific data & also for all diffrent material types will that be fine (or) it usually required seperate excel sheets for diffrent kinds of data!
Please clarify about above 2 issues!
Thanks in advance.
Thanks,
Deep.
Edited by: Deep on May 12, 2009 6:56 AM

MATERIAL MASTER DATA UPLOADING THROUGH LSMW

Hi.
I am new to lsmw.
we have a requirement to upload the material master data through LSMW,.
the data is on Excel sheet on the Desktop of the system.
Can any body help me to upload the Material Master data, procedure in step wise.
Thanks in advance,
regards,
Eswar.M

Hi Venkat,
Go through the following Steps
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
     Subproject Name
     object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
   Maintain Object Attributes
select Standard Batch/Direct Input
   give Object -- 0020
       Method -- 0000
   save & Come Back
2) select radio-Button 2 and execute
   Maintain Source Structures
   select the source structure and got to click on create button
   give source structure name & Description
   save & Come Back
3) select radio-Button 3 and execute
   Maintain Source Fields
   select the source structure and click on create button
   give
   first field
        field name    matnr
        Field Label   material Number
        Field Length 18
        Field Type    C
   Second field
        field name    mbrsh
        Field Label   Industrial Sector
        Field Length 1
        Field Type    C
   Third field
        field name    mtart
        Field Label   material type
        Field Length 4
        Field Type    C
   fourth field
        field name    maktx
        Field Label   material description
        Field Length 40
        Field Type    C
   fifth field
        field name    meins
        Field Label   base unit of measurement
        Field Length 3
        Field Type    C
save & come back
4) select radio-Button 4 and execute
   Maintain Structure Relations
   go to blue lines
      select first blue line and click on create relationship button
      select Second blue line and click on create relationship button
      select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
   Maintain Field Mapping and Conversion Rules
   Select the Tcode and click on Rule button there you will select constant
   and press continue button
   give Transaction Code : MM01 and press Enter
   after that
   1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
   2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
   3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
   4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
   5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
   Maintain Fixed Values, Translations, User-Defined Routines
   Create FIXED VALUE Name & Description as MM01
   Create Translations Name & Description as MM01
   Create User-Defined Routines Name & Description as MM01
   after that delete all the above three just created in the 6th step
   FIXED VALUE --MM01
   Translations --MM01
   User-Defined Routines --MM01
   come back
7) select radio-Button 7 and execute
   Specify Files
   select On the PC (Frontend) -- and click on Create button(f5)
                                  give the path of the file like "c:\material_data.xls"
                                  description : -
                                  separators as select tab radiao- button
   and press enter   save & come back
8) select radio-Button 8 and execute
   Assign Files
   Save & come back
9) select radio-Button 9 and execute
   Read Files
   Execute
   come back
   come back
10) select radio-Button 10 and execute
    Display Imported Data
    Execute and press enter
    come back
    Come back
11) select radio-Button 11 and execute
    Convert Data
    Execute
    come back
    Come back
12) select radio-Button 12 and execute
    Display Converted Data
    Execute & come back
13) select radio-Button 13 and execute
    Start Direct Input Program
   select the Program
   select continue button
go with via physical file
give the lock mode as 'E'
and execute
Regards
Sreeni

Transferring MATERIAL MASTER DATA USING lsmw

I am using LSMW to transfer material master data from text file using direct input program RMDATIND. The problem is that the field WRKST in screen is of 48 characters while the batch data structure BMMH1 of field WRKST contains 14 characters. How can we transfer the full 48 characters in text file to THE FIELD BMMH1 IN DIRECT INPUT PROGRAM. Can we write any translation or routines . If yes, how is it possible. I can do the same using BDC but our client is already using the LSMW , only the new field WRKST for material has to be inserted. It is picking only 14 characters.
Regards
Debopriyo

Hi
Kindly use the sap note 351557 it is applicable for your release
if you have any further clarifications let me know
Regards
Damu

Material master data complete in bi - infoset or multiprovider

Hi all.
for one of the reporting requirement of my client i need to extract the complete material master data in BI - from MARA, MARC, MARD, MSTLB tabls.
which i have done and stored in the infoobjects - 0MATERIAL, 0MAT_ST_LOC, 0MAT_PLANT, 0MAT_SALES.
now user want to see all the information against each material in 1 single line the multiple lines will only come in when there is plant.
which approach i shoul go for this scenario.
infoset or multiprovider.
i created infoset by using inner join but then i see only common materials, left outer join is giving me problems.like -
Invalid or missing ON condition for left outer join (0MAT_PLANT)
Invalid or missing ON condition for left outer join (0MAT_ST_LOC)
Invalid ON condition for left outer join (0MATERIAL)
kindly give your suggesstions on this.
thanks
dipika

Hello,
There are restrictions regarding left outer join in infoset:
If a left outer join is used, the following restriction applies to the right table (right operand):
·        Only join conditions with exactly one other table can be defined and
·        This table in turn cannot be a right table (right operand) of a left outer join.
Tables connected with left outer joins always form the end of a chain of tables. In this way, as many tables as you want can be linked in an InfoSet with a left outer join to a core of tables that are connected using inner joins.
The restrictions on the definition of left outer joins are due to the technical limitations of databases. These restrictions do not apply to inner joins.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/67/7e4b3eaf72561ee10000000a114084/content.htm
http://help.sap.com/saphelp_banking60/helpdata/ru/a3/96663bd194a978e10000000a11402f/content.htm
BR
Ondrej

How to maintain material master data in plant....

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Hi,
Please check the below link for MMR creaion .
http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
Regards,

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Can we recieve goods for purchase order with out material master data in PO

I have service PR for doing the services. I will give the material which is not accounted ( no material in the PO)and raise PO with reference to production order. but once the service is done,that product will become a material ( master data available) I have to receive the final product.Can we do the GR for this product. If so ,could you please explain the scenario

Hi Sankarkumar
When you are issuing the material for servicing your existing inventory for the material will be affected how you are plannignto handle that? You are receiving a different material once the serviceing is done then again yoour inventory will be affected for the new material. If you do not intend to issue material in SAP then why are you worried when you are bringing the new material into SAP after servicing is over? It is a subcontract scenario in a normal situation. But since you do not want then you can do a Service PO from the reqn and later use receipt without PO for bringing material in. Just speak to your finance guys how to set right the debit/credit amount resulted due to this transaction.
Regards
Sam

BDC MATERIAL MASTER DATA CONVERSION

Similar Messages

Maybe you are looking for