BDC not saving the Document

Dear Friends,
I have written the BDC for FB01. It's uploading all the voucher entries properly but after the last entry it's not saving the document and asking for new entry..
What may I be missing? Any clues???
Regards,
Alok.

Hi ,
Use simulate button, to check and make sure the amount on both sides(DR/CR) are equal. If the problem is not solved then check for your BDC recording, is having any Popup's screens to fill the mandotary fields like cost center like that.
Thanks,
Bala.

Similar Messages

  • Invoice outputs are not printing after saving the document..!

    Invoice outputs are not printing after saving the document. Eventhough we maintain all condition records not only that Processing log also it showed that it has been processed on some date. but customer not received the printout
    Amar

    hI,
    GO TO IMG, SD, BF, OUTPUT CONTROL, OUTPUT TYPES, SELECT UR OUTPUT TYPE, GO TO DETAILS ICON AND ASSIGN THE VALUE "ISSUE OUTPUT IMMEDIATELY SAVING THE APPLICATION" FROM DROP DOWN DOWN LIST IN THE DEFAULT VALUES
    AND ASSIGN THE RELEVENT PRINTER TO USER ID IN SU01 AND IN CONDITION RECORDS
    REGARDS,
    SK
    Edited by: Sadanandam Kasarla on Mar 16, 2009 12:07 PM
    Edited by: Sadanandam Kasarla on Mar 16, 2009 12:08 PM
    Edited by: Sadanandam Kasarla on Mar 16, 2009 12:10 PM

  • "Message Processor" does not get assigned when saving the document.

    Hi folks!
    When creating a support message (SLFN) and saving the document usually the BP of the current user got assigned to the partner funtion "message processor".
    This used to work but does not anymore. Now I cannot find the reason why.
    I think I could achieve this via customizing "Make Settings for Change Transaction Types" and using "Specify Copy of Current User" but I am pretty sure this was not customized before.
    I could use partner determination procedure, too. Access sequence "User" but still I am not sure this was customized before.
    I am using SLFN transaction type service provider scenario (SLFC0001)
    Anyone got an idea?
    Thanks in advance.
    Regards
    Edited by: Christian Kaunzner on Mar 25, 2009 5:15 PM

    Hi Christian,
    did you solve this issue on your own? can you share your experience?
    thanks
    Pedro Rodrigues

  • Error - Could not place the document 'IMG_1664.MOV' because no parser...

    I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
    Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
    The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. Can anyone help as Im desperate to try out the new features of CS6 for video editing.
    I am running a 27" iMac with 12gb RAM and 1gb of Video RAM. Any help would be very much appreciated as im at a complete loss and there seems to be very little about this problem on the net at the moment. I am also running Lion if that helps.
    Thanks
    James

    I was getting the same error message when trying to instal a simple brush in CS6 64bit, I saved my work and backed out of the program and opened the regular (i'm guessing 32 bit) program and tried to instal them there. It worked no problem. That would be my suggestion to you to see if it is an error in both formats of CS6 and if it works, it might be something to let adobe know is an error that needs be fixed or at least addressed to the general public as to why it won't work. I beleive you should have received both version with your install. I did anyways.
    Best wishes

  • I have been working on a document in Pages 4.3 and now it tells me I can not open the document unless I upgrade to Pages 5.2. When I look up Pages 5.2 the App store says "installed" nor can I find a "purchase" or "install" button.

    My OS is 10.9.3.I've been working on a document in Pages 4.3. Now is says I can not open the document unless I upgrade to Pages 5.2. The Pages 5.2 page in the App store says "installed" nor can I find a "purchase" or "install" button. How do I get Pages 5.2?

    If you have already updated to Pages 5.2 on your Mac, you may be trying to open the file with a previous version of Pages. If this is the case, you have two versions of Pages on your Mac & are trying to open Pages 5 documents with Pages 4. Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there then right-click on the Dock icon & select Options > Keep in Dock.
    Installing new versions of iWork has never replaced existing versions. This is nothing new. The only thing new is that the '09 apps are moved to an iWork '09 folder if they were purchased from the Mac App Store. If they were installed from disk they should already be in a separate folder in Applications.

  • Last night I downloaded the latest Word update. Today the first Word document crashed and I lost 45 minutes of work in spite of having saved the document numerous times. Why is Word crashing the day after a safety update? I have Office 2008 for Mac

    Last night I downloaded the latest Word update. Today the first Word document crashed and I lost 45 minutes of work in spite of having saved the document numerous times. Why is Word crashing the day after a safety update? I have Office 2008 for Mac

    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons
    Open Console in Applications>Utilities, check the system log for the date/time of the last problem  & next startup for clues.

  • An error has occurred: Could not find the document.

    I get the "An error has occurred: Could not find the document." error when trying to open a URL using OpenDocument.  The URL is as follows:
    http://:<myserver>8080/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AZjCUhaL3c9Is.YxtGMc7K4&sIDType=CUID
    I am certain the value of iDocID is correct, and I am also certain that I can get an OpenDocument to work on the server.  In fact, I tried the same URL using a different iDocID for a Webi report in a different folder, and it works.  For some reason, it appears as though the report in this folder won't open though.
    Any thoughts on this would be greatly appreciated.  I've been working on this for a couple of days an am completely stumped.  Also, I'm relatively new to Business Objects.  Is there a log file that I can view that might give me more details regarding the error?
    Thanks in advance for your help!

    May be that the user who is accessing the report does not have sufficient rights to view it.
    Check whether you are able to view the document as an administrator.
    Regards,
    Niraj

  • Could not save the document to the repository for the following reason

    Hi,
    Some of the Scheduled reports are getting failed because of the following Error.
    Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server: frs://Output/a_242/027/084/5512178/aduu8vtfkntmvyv8lsnntas.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
    i have searched about this but no use no information on the same.
    So Pls let me know why this problem will occur and how to resolve this,I am new to this forum if any this is wrong pls let me know
    Thanks in advance,

    HiShwetabh Suman
    Thanks a lot for immediate response,
    Please go through the following
    From the logs I see a difference in the execution steps as below:
    [2014-03-31 10:24:15,364] [TID:13] [INFO ] [child.RunStatusTimerTask.run():17]: calling checkRunStatus
    [2014-03-31 10:24:31,887] [TID:3168] [INFO ] [child.ChildImpl.request():23]: request: [GetLoad]
    [2014-03-31 10:24:31,888] [TID:3168] [INFO ] [child.ChildImpl.request():25]: response: [1]
    [2014-03-31 10:24:37,879] [TID:3153] [ERROR] [webi.PublishingSubsystem.run():93]: Throwable exception caught:
    com.businessobjects.rebean.wi.ServerException: Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit
    - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server:
    frs://Output/a_165/024/084/5511333/aqew_jeqdcjcrukoadjdtk0.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
    Can you please help us understand the reason why the child.runstatustimertask.run() is called in the case where we get the failure. Because upon noticing the difference in the steps of execution I see that this method is called and after that the failure is occuring.
    Also, few other findings are that :
    1. The error occurs from both the nodes adaptive job servers randomly.
    2. The IFRS and OFRS of one of the node is not being used at all for any file transfers (though the configurations are exactly same).
    Please advise and help us get rid of the said error.
    Can u give any permanent solution for us

  • Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

    getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

    Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
    Mylenium

  • Could not retrieve the document with the passed obsolete token.

    Hi,
    Issue is with the specific report not able to execute when the query is cancelled and getting an error when you are cancelling an already executing query.
    Receiving an error message during running one of our report in the
    following way:
    - Run the Webi report
    - Select the value for 8 prompts
    - Click on cancel
    - try to re-run by clicking on re-fresh and receive an error message.
    The error message is the following:
    "Could not retrieve the document with the passed obsolete token (Error: RWI 00323) (Error: INF)"
    Till now we have made the following changes:
    This might be caused by a storage token that identifies a document state, which is no longer available in the storage tokens stack.
    In the webi.properties file, increased the value of storage tokens stack size.
    1. Edit the webi.properties file found in the following location:
    u2022 <Installed dir>\program files\businessobjects\BOenterprise115\Web services\en\dsws_webservice_boe\data\asemble\dsewsBobjJava\src\WEB-INF\classes\webi.properties.
    2. Add or change the following variables:
    u2022 WID_FAILOVER_SIZE (This sets the maximum number of tokens to keep in memory. It is 10 by default.)
    u2022 WID_STORAGE_TOKEN_STACK_SIZE (this sets the maximum number of tokens stored on disk. It is 10 by default.)
    u2022     Deleted cookies.
    u2022     Add  the Java Runtime Parameter value from following path:
    Start - > Control Panel-> Java -> Java Applet Runtime Settings
    Click on View.
    Add the Java runtime Parameter value: Xmx200.
    It is not a machine specific issue however it is intermittent.
    Please advice.
    Regards,
    Pradnya Kokil

    Hi Pradnya,
    Following solutions might help you to resolve the issue.
    Solution1:
    To achieve optimum performance, the developer should limit the number of new windows that can be opened using the OpenDocument function, particularly if using it within the drill function.
    If you must open a new window each time, you can increase the number of document instances available on the system by modifying parameters in the webi.properties file:
    1. On the Business Objects server, navigate to the following directory:
    C:\Program Files\Business Objects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes
    2. Open the webi.properties file using a text editor.
    3. Uncomment the FAILOVER_SIZE=10 line by removing the # from the beginning of the line.
    4. After FAILOVER_SIZE, add the following:
    STORAGE_TOKEN_STACK_SIZE=40
    5. Save the file.
    6. Restart the application server
    Solution2:
    Do not use Control Key + N or File New from Browser for invoking new instance of Browser
    Avoid opening Infoview by Hyperlinks.
    Alternatively, by setting logontoken.enabled property in web.xml for desktop.war, will stop users allowing using old token
    Locate web.xml file in desktop.war file deployed on your application server
    Locate the following string in web.xml:<param-name>logontoken.enabled</param-name>
    Change the <param-value> for logontoken.enabled from true to false (forexample, <param-value>false</param-value>)
    Save and close the file
    Restart the web application server to apply the changes
    Regards,
    Sarbhjeet Kaur

  • An error occurred: Save document failed / An error occurred while saving the document: PATH (HDB 00055)

    Hello Colleagues, I am creating an analysis in build 576, everything goes well, the algorithm calculates the needed values, but when I try to save the analysis, I receive the following error message: "An error occurred: Save document failed / An error occurred while saving the document: <PATH> (HDB 00055)".
    Does anyone know what could cause this error message?
    Thanks a lot for any hint.
    Sergey

    Hi Henry,
    I am using PA 1.0.11 and received this error; any update on this fix for SAP PA. Does this happen for a particular data source.
    I am currently using Excel as source and whenever I try to use this data; I get this even if I move the data to a new file or rename a file. I tried to check the same issue with a different file and it works fine. This file worked fine a day back.
    Please let me know if this is unusual for this version.
    Regards,
    Arvind E

  • RSBBS jump query not fetching the document no in R3

    Dear Gurus
    With RSBBS transcation jump is given to R3 tansaction FB03. When query is executed and with right click go to option and with display document (FB03) its fetching the document no in DEVELOPMENT server . But when the query is transported to Production its not fetching the document no.
    Kindly do the needful at the earliest
    Regards,
    R.Satish

    Hi
    You said it is not fetching the doc no. Is it failing and showing some error?
    Have all the pre-requisite settings been done via Tcode SICF.
    Regards
    Nageswara

  • Depreciation Run Error "Not all the documents in the last posting run were

    Hi,
    When I tried to run depreciation, I found the error message as below.
    "Not all the documents in the last posting run were posted"
    How do I solve the problem?
    Please advise me..
    Thank you for your help..
    Jake

    Hi,
    For an Update termination you need to go into the System Log to check the real cause of the termination.
    My guess is that the document number has already been used. It has happened to me and I found no cause for that.
    I did the following then:
    I checked the highest used document number in that number range and corrected the from number of the number range.
    Then I went into the TABA table and corrected the entries there that they corresponded to the number range.
    Then I did a manual reconcilliation between AA and GL. In my case they matched, If they don't you would need to post manually to the GL to get them to match.
    Then I ran recalculation of asset values. and finally an unplanned depreciation run.
    For me it solved the problem.
    Br
    Cricke

  • "An error has occurred: Could not find the document." on opening the BO report

    Hi ,
    On publishing the BO report in Portal, we get the blank screen with warning message as below screenshot and  facing the ""An error has occurred: Could not find the document."" error message when accessing the BO report using open document URL directly in browser instead of portal.
    Link: http://<host>:8080/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=ASClVc_yw55L
    We already have many BO reports successfully running in the production environment.
    But for this new report we are getting this error. The difference found in this report is from Infoviewapp the login page appears as below in to which the developer logs in.
    But for the reports coming with error the login page authentication value is changed to "Enterprise". So the system related fields disappear after that and looks like below
    Please let us know the root-cause of this error message. Is this something to do with user authorization in BO system at report level or some config changes related to SAP/Enterprise authentication.
    Multiple posts in SDN related to this error message points to check for user authorizations in BO system. Please provide details on this if this is the case.
    Regards,
    Bhaskar

    Hi ,
    The dropdown is now made visible to the users in the opendocument property as per the suggestion in the below links. The user can choose the authentication type and login into reports after that.
    http://scn.sap.com/thread/3525264
    http://scn.sap.com/thread/1417858
    My question now is after changing the visibility of the authentication true, the SSO doesn't work as before. Is there any way to make the SSO available with this setup ?
    Regards,
    Bhaskar

  • Camera not saving the phots

    after updating i phone(4.3.5) camera not saving the photos

    Ok .... try this:
    Take a pic them open it. See if you can rename it. If you can, give it a name then save it with that name and close the camera app. Now do a search for that name and see if you can find it.
    Also try to change the camera settings to store the pic on the device.

Maybe you are looking for