BDC program for Health plans
Hi,
I would like to know the procedure to write a BDC program for Health plans(167) and in SHDB what will be the Tcode for it.
Points will be rewarded
Thanks and Regards
Chaitanya.
Hi
Go to Tcode : SHDB.
Then give the Transaction code as PA30. Give the Infotype number as 0167.
Give the input field what u need to be uploaded.
Then save.
Then write the BDC Program for that.
Reward points if useful.
Regards,
N.L.Narayana
Similar Messages
-
Problem in creating a BDC program for transaction cj20n(project sytem)
Hi all,
I am trying to create project,WBS element ,network and activity using a BDC program,
I am able to create to a recording for the transaction cj20n using tcode shdb but when i run the recording it doesnt run properly i am not able to create any thing.
I get error saying that a particular field doesnt exist on the screen.
Is possible to create a BDC program for transaction CJ20N ?
Also is there any other alternative apart from using a BAPI or a function module.
Thanks,
NishantHi,
Check below link for BAPIs of transaction cj20n.
[BAPI for cj20n|BAPI for CJ20N transaction]
Thanks,
Asit Purbey. -
Please Help me How write the BDC program for the MIGO inbound Delivery
Please help me how to write bdc program for the MIGO Inbound Delivery in 4.7EE Version. Please help me.
Not in LSMW. Required call transaction or Session Method. Please help me.
MohanRun transaction BAPI . Select Logistics Execution/Shipping/InboundDelivery/SaveReplica.. You can use function module BAPI_INB_DELIVERY_SAVEREPLICA in your ABAP program.
-
How to create a BDC program for given recording.
i have to create a BDC program for uploading a file.
currently i am using call function
CALL FUNCTION 'F4_FILENAME'just check out the code below it is for updating two transactions
types Declaration *
types: begin of t_tab1 ,
vendor(10),
material(18),
pur_org(4),
wglif(18),
end of t_tab1.
Data Declaration *
data : begin of it_tab5 occurs 0,
vendor(10),
material(18),
end of it_tab5.
**DATA : BEGIN OF IT_TAB6 OCCURS 0,
VENDOR(10),
MATERIAL(18),
END OF IT_TAB6.
data: it_tab1 type standard table of t_tab1 with header line.
data: wa_tab1 type t_tab1.
data: wa_tab2 type t_tab1.
data: it_tab3 like bdcdata occurs 0 with header line.
data: it_tab4 like bdcdata occurs 0 with header line.
data: it_tab2 type table of bdcmsgcoll with header line.
data: d_file_name like ibipparms-path,
d_file_name1 type string.
Start-of-selection *
start-of-selection.
FM for finding the flat file
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
importing
file_name = d_file_name.
d_file_name1 = d_file_name.
******FM for uploading data from flat file into internal table
call function 'GUI_UPLOAD'
exporting
filename = d_file_name1
filetype = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = it_tab5
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
End-of-selection *
end-of-selection.
sort it_tab5 by vendor.
loop at it_tab5.
perform bdc_dynpro using 'SAPLBG00' 0101 .
perform bdc_field using 'BDC_OKCODE' '/00' .
perform bdc_dynpro using 'SAPLBG00' 1000 .
perform bdc_field using 'BDC_OKCODE' '=BUCH' .
perform bdc_field using 'BDC_SUBSCR'
'SAPLBG00 1101KOPF_1000'.
perform bdc_field using 'GBGMK-GAART' '2' .
perform bdc_field using 'GBGMK-GAERB' 'X' .
perform bdc_field using 'BDC_SUBSCR'
'SAPLBG00 1103TAB_SUB_1000'.
perform bdc_field using 'BDC_CURSOR' 'GBGMP-LSTNR(01)' .
perform bdc_field using 'GBGMP-LSTNR(01)' it_tab5-material .
call transaction 'BGM1' using it_tab3 mode 'E' messages into it_tab2
refresh it_tab3.
wa_tab1-pur_org = 'ABCP'.
loop at it_tab2.
endloop.
perform bdc_dynpro using 'SAPMM06I' 0100 .
perform bdc_field using 'BDC_CURSOR' 'EINE-EKORG' .
perform bdc_field using 'BDC_OKCODE' '/00' .
perform bdc_field using 'EINA-LIFNR' it_tab5-vendor .
perform bdc_field using 'EINA-MATNR' it_tab5-material .
perform bdc_field using 'EINE-EKORG' wa_tab1-pur_org .
perform bdc_field using 'RM06I-NORMB' 'X' .
perform bdc_dynpro using 'SAPMM06I' 0101 .
perform bdc_field using 'BDC_CURSOR' 'EINA-WGLIF' .
perform bdc_field using 'BDC_OKCODE' '=BU' .
perform bdc_field using 'EINA-WGLIF' it_tab2-msgv1 .
call transaction 'ME12' using it_tab3 mode 'E'.
refresh it_tab3.
refresh it_tab2.
endloop.
*& Form BDC_DYNPRO
Start new screen
-->P_FNAM text
-->P_FVAL text
form bdc_dynpro using program
dynpro.
clear it_tab3.
it_tab3-program = program.
it_tab3-dynpro = dynpro.
it_tab3-dynbegin = 'X'.
append it_tab3.
endform. " BDC_DYNPRO
*& Form BDC_FIELD
Insert field
-->P_FNAM text
-->P_FVAL text
form bdc_field using fnam
fval.
clear it_tab3.
it_tab3-fnam = fnam.
it_tab3-fval = fval.
append it_tab3.
endform. " BDC_FIELD
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 6:20 PM -
What is the bdc program for vendor master?
what is the bdc program for vendor master?
Hi,
Find the code here.
And do create your text file data in the order of itab structure.
{report ZBDC_XK01
no standard page heading line-size 255.
data: bdcdata like bdcdata occurs 0 with header line.
data: begin of itab occurs 0,
lifnr like lfa1-lifnr,
bukrs like RF02K-bukrs,
ekorg like RF02K-ekorg,
ktokk like RF02K-ktokk,
anred like lfa1-anred,
name1 like lfa1-name1,
sortl like lfa1-sortl,
land1 like lfa1-land1,
spras like lfa1-spras,
waers like lfm1-waers,
end of itab.
selection-screen begin of block blk1 with frame.
parameters: p_file like rlgrap-filename OBLIGATORY.
selection-screen end of block blk1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
perform f4_help_p_file.
start-of-selection.
perform get_data.
perform upload.
END-OF-SELECTION.
*& Form f4_help_p_file
text
--> p1 text
<-- p2 text
form f4_help_p_file .
data: v_file like p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = v_file.
CHECK sy-subrc EQ 0.
p_file = v_file.
endform. " f4_help_p_file
*& Form get_data
text
--> p1 text
<-- p2 text
form get_data .
data: s_file type string.
s_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = s_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = 'D'
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
stop.
ENDIF.
endform. " get_data
*& Form upload
text
--> p1 text
<-- p2 text
form upload .
loop at itab.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-KTOKK'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR' itab-lifnr.
perform bdc_field using 'RF02K-BUKRS' '0001'.
perform bdc_field using 'RF02K-EKORG' '1000'.
perform bdc_field using 'RF02K-KTOKK' '0001'.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-SPRAS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-ANRED' itab-anred.
perform bdc_field using 'LFA1-NAME1' itab-name1.
perform bdc_field using 'LFA1-SORTL' itab-sortl.
perform bdc_field using 'LFA1-LAND1' itab-land1.
perform bdc_field using 'LFA1-SPRAS' itab-spras.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-AKONT'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS' itab-waers.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
call transaction 'XK01' using bdcdata mode 'A'.
refresh bdcdata.
clear itab.
endloop.
endform. " upload
*& Form bdc_dynpro
text
-->P_0126 text
-->P_0127 text
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform. " bdc_dynpro
*& Form bdc_field
text
-->P_0316 text
-->P_0317 text
form bdc_field using fnam fval.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endform. " bdc_field}
Reward points if you find it helpful
Thanks,
Prasanna -
BAPI or FM or Standard BDC program for Production version creation (C223)
Hi All,
Is there BAPI or FM or Standard BDC program for Production version creation? Please help me.
Thanks & Regards
SanthoshHi,
Try this FM "CO_OCM_CREATE_PROD_VERSION"
Regards,
Smart -
Standard hr reports for health plans
Hi Experts,
Can any one please tell me the standard hr reports for health plans for infotype 0167.
Thank you.
Regards,
Admir.
Points will be rewarded.Follow this path from the main SAP menu:
Human resources -> Information System -> Reports -> Personnel management -> Benefits. Then you can select from reports under the topics of Participation, Cost and contributions, or Statistics. I hope this helps.
- April King -
Need to write BDC program for Transaction VA01(Sales order creation)
Dear Friends,
I need to write a BDC program for uploading data into sap from an excel sheet file. The data contain Material Description,Customer Name,Date of Delivery,Quantity,Unit of measure etc.
material desc customer date of delivery quantity unit of measure
abcdf xyz ltd 24.12.2011 2 4 gm
The transaction is VA01.How will I find the correct fields and related tables? What are the related fields needed in the transaction VA01.
Thanking you
Sacheen Pukhrambam
Moderator Message: Put some self-effort before posting your question. Thread locked.
Edited by: Suhas Saha on Nov 25, 2011 1:25 PMHello,
You could try using a BDC with VL04 but first preference would be to see if there are any BAPI functions (search for BAPI) that can do this.
If BUS2032 doesn't have an attribute that you want (eg shipping point) then sub-delegate to ZBUS2032 and add the attribute, it's straightforward. You just have to know how to determine the value programmatically.
regards
Rick Bakker
hanabi technology -
ENTRY_ACT field in BDC program for Txn. IA05
Dear Gurus,
I want to write BDC program for IA05 transaction. In that, Inspection Charatertics entries, I want to add more entries (more than one page - page down). Please guide me how to handle RQPAS-ENTRY_ACT screen field.
Please provide the logic in writing, if possible.
Regards,Hi,
I am having same problem.
Can you give me the code as it shows solved at your end..
-Maharshi -
Hi Friends,
I have an issue i am stuck here,
i have to create BDC Program for XK01 tcode,
and my requirement is that,
i have three users first user want only three colum and second user want four column
and third user want five column in table control,
so how could i achieve it,
please hekp me out.
Thanks
VikashHi Vikash,
FORM bdc_dynpro USING p_program p_dynpro.
IF user-one.
FORM bdc_field USING fnam1 fval.
FORM bdc_field USING fnam2 fval.
FORM bdc_field USING fnam3 fval.
ELSEIF user-two.
FORM bdc_field USING fnam1 fval.
FORM bdc_field USING fnam2 fval.
FORM bdc_field USING fnam3 fval.
FORM bdc_field USING fnam4 fval.
ELSEIF user-three.
FORM bdc_field USING fnam1 fval.
FORM bdc_field USING fnam2 fval.
FORM bdc_field USING fnam3 fval.
FORM bdc_field USING fnam4 fval.
FORM bdc_field USING fnam5 fval.
ENDIF.
Does this make sense?
regards,
Archer. -
BDC program for inbound delivery VL31
Dear experts,
I have created BDC program for inbound delivery with old T_CODE VL31,but it's very inefficient.Now I must change the program for the efficiency improve.
Could you give any idea?
Thanks in advance,
collysun.I'm sorry, but it does not seem that there is a BAPI for this (looking at transaction BAPI and business object BUS2015).
Have you perhaps looked at the new transaction VL31N? Are there any differences that may improve the input (limit the number of BDC steps)?
Otherwise, take a look at the way you are entering data now. Make sure there are not too many dialog steps. i.e. Make sure you enter all the data you can on a single screen, only then process the next OKCODE. Also, look at the transaction again: Perhaps you can enter items in an overview screen instead of individual items. (I have no knowledge of your situation of course; these are just some general guidelines).
Cheers,
Martin -
BDC Program for posting FI document
Hi everyone!
Anyone out there already made a BDC program for posting FI documents with this concept:
User will upload a spreadsheet file with the line items per row
User will input which TCODE user will use for posting
BDC program will then post the document using the line items in the spreadsheet file
I need to make a BDC program with that concept but having a hard time to think of a good algorithm to make my program very flexible.
Thanks!you can use batch input program RFBIBL00 to pasrk document. Please check these links for more information.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADM/CAGTFADM-FI.pdf
http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/CAGTFADM-FI.pdf
Have a processing routine defined for the specific Idocs that come into SAP.
So, as and when the idocs are in, the routine triggers and you can codeappropriately in the routine for parking the idocs.
Check these threads
BAPI For Parking FI Document
Post FI Parked Documents
You can use message type INVOIC, IDoc Type INVOIC01/02 with process code INVF (FM IDOC_INPUT_INVOIC_FI) for FBV1 transaction.
See if there are any BAPI/FMs for parking an FI document.
1.. Use INVOIC01 IDOC with INVF process code (This works for Vendor Line Items only). I read the documentation somewhere that, this would work even if the line items are > 999
2.. BAPI_ACC_INVOICE_RECEIPT_POST (This works for Vendor Line Items only)
3.. BAPI_ACC_DOCUMENT_POST (Tax jurisdiction allocation not calculated properly)
4.. BAPI_ACC_GL_POSTING_POST (No tax line items allowed for this BAPI) -
BDC program for Other Goods receipts
Hi all,
I need BDC program for Other goods receipts,
I have data in excel like material, batch id, qty, actual width, length, plant etc. i want to upload this in one short based on the movement type.
Thanks in advance.
ShankarHi MP Shankar,
This is a sample BDC program .Use the format to develop your own BDC program.First record your trasnaction and use that recorded program here.Pass your filename here.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_ifile TYPE dxfile-filename.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-002.
PARAMETERS: p_sess RADIOBUTTON GROUP g3 "create session
DEFAULT 'X' USER-COMMAND bdc,
p_ctu RADIOBUTTON GROUP g3. "call transaction
SELECTION-SCREEN END OF BLOCK b3.
DATA : BEGIN OF itab OCCURS 0,
str TYPE string,
END OF itab,
l_file TYPE string,
t_bdcdata TYPE STANDARD TABLE OF bdcdata,
wa_bdcdata LIKE LINE OF t_bdcdata.
AT SELECTION SCREEN ON VALUE REQUEST
Value request for the filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_ifile.
PERFORM help_input_file.
START-OF-SELECTION.
CLEAR l_file.
l_file = p_ifile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_file
filetype = 'ASC'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
*Start new session
IF p_sess = 'X'.
PERFORM bdc_open.
ENDIF.
LOOP AT itab.
PERFORM creat_batch_input.
PERFORM bdc_insert.
IF p_ctu = 'X'.
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'A'.
ENDIF.
ENDLOOP.
IF p_sess = 'X'.
PERFORM bdc_close .
ENDIF.
*& Form bdc_open
text
--> p1 text
<-- p2 text
FORM bdc_open .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = 'ZMUK'
user = sy-uname
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11.
ENDFORM. " bdc_open
*& Form creat_batch_input
text
--> p1 text
<-- p2 text
FORM creat_batch_input .
use your own recorded program here.
PERFORM bdc_dynpro USING 'SAPLWBABAP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=STRT'.
PERFORM bdc_field USING 'RS38M-PROGRAMM'
itab-str.
PERFORM bdc_field USING 'RS38M-FUNC_EDIT'
'X'.
PERFORM bdc_dynpro USING 'SAPLSLVC_FULLSCREEN' '0500'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=&F03'.
PERFORM bdc_dynpro USING 'SAPLWBABAP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BACK'.
PERFORM bdc_field USING 'RS38M-PROGRAMM'
itab-str.
PERFORM bdc_field USING 'RS38M-FUNC_EDIT'
'X'.
ENDFORM. " creat_batch_input
*& Form bdc_insert
text
--> p1 text
<-- p2 text
FORM bdc_insert .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = 'SE38'
TABLES
dynprotab = t_bdcdata
EXCEPTIONS
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
printing_invalid = 5
posting_invalid = 6
OTHERS = 7.
ENDFORM. " bdc_insert
*& Form bdc_dynpro
text
-->P_0168 text
-->P_0169 text
FORM bdc_dynpro USING p_program TYPE any
p_dynpro TYPE any.
CLEAR wa_bdcdata.
wa_bdcdata-program = p_program.
wa_bdcdata-dynpro = p_dynpro.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO t_bdcdata.
ENDFORM. " bdc_dynpro
*& Form bdc_field
text
-->P_0179 text
-->P_0180 text
FORM bdc_field USING p_fnam TYPE any
p_fval TYPE any.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = p_fnam.
wa_bdcdata-fval = p_fval.
CONDENSE wa_bdcdata-fval.
APPEND wa_bdcdata TO t_bdcdata.
ENDFORM. " bdc_field
*& Form bdc_close
text
--> p1 text
<-- p2 text
FORM bdc_close .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
ENDFORM. " bdc_close
*& Form help_input_file
text
--> p1 text
<-- p2 text
FORM help_input_file .
DATA: lt_file_table TYPE filetable,
la_file_table LIKE LINE OF lt_file_table,
l_rc TYPE i,
l_pcdsn TYPE cffile-filename.
REFRESH lt_file_table.
CLEAR la_file_table.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
CHANGING
file_table = lt_file_table
rc = l_rc.
READ TABLE lt_file_table INTO la_file_table INDEX 1.
l_pcdsn = la_file_table-filename.
MOVE l_pcdsn TO p_ifile.
ENDFORM. " help_input_file -
i have created a BDC program for ME29N, it is working in process level but it is not working while executing it.
how can i solve that? pls give me a sample code.....Hi,
You can use this BAPI's instead of BDC's for your ME29N Transaction.
1) BAPI_PO_RELEASE -- This method is to release Purchase Order.
2) BAPI_PO_GETRELINFO -- Detailed Release Information on Purchase Order
3) BAPI_PO_GETITEMSREL -- List Purchase Orders for Release
Regards,
Sudhakar Reddy.A -
Hi ALL,
Pls send me BDC program for FCH5 and FCH6 in function module it self..
How to write BDC the program in function module for FCH5 and FCH6..
ThanksHI ,
Thanks for your message,
I'm doing the one bank payment(Out Sourcing Cheque) (ZCITI)transaction so in that implementation i need the FCH5 and FCH6 BDC programs.
can you send me the sample code of BDC programs => thread locked for above tcodes bcz i haven't done BDC programs in Function modules.
Thanks in advance.
Edited by: kishan P on Oct 15, 2010 4:00 PM
Maybe you are looking for
-
Java.rmi.ConnectException using webstart Swing client with WL 8.1 SP2 in a
Hi all, I'm receiving the following exception when invoking a remote method on a cached remote stub. This only happens if there are at least two nodes running in a cluster. It happens more often the more nodes are running. It seems that the exception
-
Material Provided by Customer table MKUB
There is a table in SAP "MKUB Material Provided by Customer" My question is how is this table used? We currently manage material that our customer owns and have not yet found a good process. If there is a standard SAP process it would be great. Thank
-
Dear All, We are recently go live the ECC 6.0 system. Just now we came to know while doing the Invoice cancellation VAT values are not matched with actual posted invocie. like I posted one invoice as mentioned GR IR Account...................30000.00
-
Remove optinos in user decision task dinamically
Hi all, I have an user decision task wich have several options. I want to remove (or deactivate) some of these options dinamically or under some conditions... Do you know how can i do it? May be it's possible to do with a program exit but i don't fin
-
Hundreds of ERROR = KEY_MISMATCH in emoms.trc
I am pretty sure this is because the agent was not secured. I have 1000s of these errors in my log file and its cluttering my grid control logs. I can't find legitimate issues. Its another group, so I can't get on their server to shut down the agent.