Bdc program for uploading region data in sales analysis
hi expert,
i want to upload the region data in sales transaction show that i want to analysis the area wise sales detail for different material.for this which *transaction code* ,i should use for recording.can any body provide me example for BDC Program.
Thank you
hi expert,
i want to upload the region data in sales transaction show that i want to analysis the area wise sales detail for different material.for this which *transaction code* ,i should use for recording.can any body provide me example for BDC Program.
Thank you
Similar Messages
-
Problem in the BDC program to upload the data from a flat file.
Hi,
I am required to write a BDC program to upload the data from a flat file. The conditions are as mentioned below:-
1) Selection Screen will be prompted to user and user needs to provide:- File Path on presentation server (with F4 help for this obligatory parameter) and File Separator e.g. @,#,$,%,... etc(fields in the file will be separated by using this special character) or fields may be separated by tab(tab delimited).
2) Finally after the data is uploaded, following messages need to be displayed:-
a) Total Number of records successfully uploaded.
b) Session Name
c) Number of Sessions created.
Problem is when each record is fetched from flat file, the record needs to be split into individual fields separated by delimiter or in case tab separated, then proceeding in usual manner.
It would be great if you provide me either the logic, pseudocode, or sample code for this BDC program.
Thanks,Here is an example program, if you require the delimitor to be a TAB, then enter TAB on the selection screen, if you require the delimitor to be a comma, slash, pipe, whatever, then simply enter that value. This example is simply the uploading of the file, not the BDC, I assume that you know what to do once you have the data into the internal table.
REPORT zrich_0001.
TYPES: BEGIN OF ttab,
rec TYPE string,
END OF ttab.
TYPES: BEGIN OF tdat,
fld1(10) TYPE c,
fld2(10) TYPE c,
fld3(10) TYPE c,
fld4(10) TYPE c,
END OF tdat.
DATA: itab TYPE TABLE OF ttab.
data: xtab like line of itab.
DATA: idat TYPE TABLE OF tdat.
data: xdat like line of idat.
DATA: file_str TYPE string.
DATA: delimitor TYPE string.
PARAMETERS: p_file TYPE localfile.
PARAMETERS: p_del(5) TYPE c.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
DATA: ifiletab TYPE filetable.
DATA: xfiletab LIKE LINE OF ifiletab.
DATA: rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
CHANGING
file_table = ifiletab
rc = rc.
READ TABLE ifiletab INTO xfiletab INDEX 1.
IF sy-subrc = 0.
p_file = xfiletab-filename.
ENDIF.
START-OF-SELECTION.
TRANSLATE p_del TO UPPER CASE.
CASE p_del.
WHEN 'TAB'.
delimitor = cl_abap_char_utilities=>horizontal_tab.
WHEN others.
delimitor = p_del.
ENDCASE.
file_str = p_file.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = file_str
CHANGING
data_tab = itab.
LOOP AT itab into xtab.
CLEAR xdat.
SPLIT xtab-rec AT delimitor INTO xdat-fld1
xdat-fld2
xdat-fld3
xdat-fld4.
APPEND xdat to idat.
ENDLOOP.
LOOP AT idat into xdat.
WRITE:/ xdat-fld1, xdat-fld2, xdat-fld3, xdat-fld4.
ENDLOOP.
Regards,
Rich Heilman -
BDC Program for Uploading Data for Property Tree in cg02
Hi,
How to upload data for property tree ( standard Properties ) of CG02. I checked for BAPI or Function Module but most them supports for specification header and sub item.
Please Let me know if any function module or BAPI available for this process. I tried with BDC Program, but it fails.
Regards,
Rajesh Kumar MurugesanHallo Rajesh
take a look here:
http://help.sap.com/erp2005_ehp_06/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Chapter "Import and Export".
1.) Reads cross these further chapters:
"Tools (EHS-BD-TLS)" => "IMport and Export" => "Import: Process" => "Specifying the Sequence of the External Data Structure " => "External File Structure: Specification"
Here you will learn how to prepare the data. In chapter:" Example: Transfer File for Specifications" you will find an example of an file whcih could be used to upload data in the property tree
2.) Chapter:" Importing Specifications" is explaining the steps whcih are need to populate the property with data using the file as prepared; read cross chapter "Specification Import Control"
I hope this helps.
C.B.
Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM
Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM -
Bdc program for pre condition allocation in ct04
dear sir
we have created dependencies for preconditions in variant configuration.
now we have to link these dependencies between the charecteristics and values
can we make BDC program for uploading the data ?
because data content is huge and takes more time.
if so what is the procedure?
thanking you
srinivasDear Srinivas,
There is no standard BDC or BAPI. However, there are few standard FMs that you can use.
CTMV_CHARACT_CHANGE - RM: Characteristics Maintenance
CTMV_CHARACT_CHANGE_KNOWL - RM: Characteristics Maintenance
CTMV_CHARACT_CHANGE_KNOWL_VAL - RM: Characteristics Maintenance
CTMV_CHARACT_CHANGE_OVERWRITE - RM: Characteristics Maintenance
CTMV_CHARACT_CHGE_KNOWL_OVWR - RM: Characteristics Maintenance
CTMV_CHARACT_CHGE_KNOWL_VAL_OV - RM: Characteristics Maintenance
CTMV_CHARACT_CHGE_TEXT_OV - RM: Characteristics Maintenance
CTMV_CHARACT_DELETE_ALL_ALLOC - RM: Characteristics Maintenance
CTMV_CHARACT_DELETE_NEUTRAL - RM: Characteristics Maintenance
CTMV_CHARACT_DEL_TEXT_OV - RM: Characteristics Maintenance
CTMV_CHARACT_INIT - RM: Characteristics Maintenance
CTMV_CHARACT_RENAME - RM: Characteristics Maintenance
CTMV_CHARACT_SAVE - RM: Characteristics Maintenance
CTMV_CHECK_CHARACTERISTIC - RM: Characteristics Maintenance
CTMV_CHECK_CHARACTERISTIC_OVWR - RM: Characteristics Maintenance
You can find more:
Go to transaction SE80 -> enter CTMV -> Expand Function Modules option.
Application Programming Interfaces:
CAMA_CHARACT_MAINTAIN - APIs Maintain Characteristics
CAMA_CHARACT_SAVE - APIs Maintain Characteristics
CAMA_CHAR_ALLOCATE_GLOB_DEP - APIs Maintain Characteristics
CAMA_CHAR_DEL_DEP - APIs Maintain Characteristics
CAMA_CHAR_MAINTAIN_DEP - APIs Maintain Characteristics
CAMA_CHAR_SNGL_MAINTAIN - APIs Maintain Characteristics
CAMA_CHAR_VAL_ALLOCAT_GLOB_DEP - APIs Maintain Characteristics
CAMA_CHAR_VAL_DEL_DEP - APIs Maintain Characteristics
CAMA_CHAR_VAL_MAINTAIN_DEP - APIs Maintain Characteristics
Regards,
Naveen. -
Need to write BDC program for Transaction VA01(Sales order creation)
Dear Friends,
I need to write a BDC program for uploading data into sap from an excel sheet file. The data contain Material Description,Customer Name,Date of Delivery,Quantity,Unit of measure etc.
material desc customer date of delivery quantity unit of measure
abcdf xyz ltd 24.12.2011 2 4 gm
The transaction is VA01.How will I find the correct fields and related tables? What are the related fields needed in the transaction VA01.
Thanking you
Sacheen Pukhrambam
Moderator Message: Put some self-effort before posting your question. Thread locked.
Edited by: Suhas Saha on Nov 25, 2011 1:25 PMHello,
You could try using a BDC with VL04 but first preference would be to see if there are any BAPI functions (search for BAPI) that can do this.
If BUS2032 doesn't have an attribute that you want (eg shipping point) then sub-delegate to ZBUS2032 and add the attribute, it's straightforward. You just have to know how to determine the value programmatically.
regards
Rick Bakker
hanabi technology -
How to create a BDC program for given recording.
i have to create a BDC program for uploading a file.
currently i am using call function
CALL FUNCTION 'F4_FILENAME'just check out the code below it is for updating two transactions
types Declaration *
types: begin of t_tab1 ,
vendor(10),
material(18),
pur_org(4),
wglif(18),
end of t_tab1.
Data Declaration *
data : begin of it_tab5 occurs 0,
vendor(10),
material(18),
end of it_tab5.
**DATA : BEGIN OF IT_TAB6 OCCURS 0,
VENDOR(10),
MATERIAL(18),
END OF IT_TAB6.
data: it_tab1 type standard table of t_tab1 with header line.
data: wa_tab1 type t_tab1.
data: wa_tab2 type t_tab1.
data: it_tab3 like bdcdata occurs 0 with header line.
data: it_tab4 like bdcdata occurs 0 with header line.
data: it_tab2 type table of bdcmsgcoll with header line.
data: d_file_name like ibipparms-path,
d_file_name1 type string.
Start-of-selection *
start-of-selection.
FM for finding the flat file
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
importing
file_name = d_file_name.
d_file_name1 = d_file_name.
******FM for uploading data from flat file into internal table
call function 'GUI_UPLOAD'
exporting
filename = d_file_name1
filetype = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = it_tab5
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
End-of-selection *
end-of-selection.
sort it_tab5 by vendor.
loop at it_tab5.
perform bdc_dynpro using 'SAPLBG00' 0101 .
perform bdc_field using 'BDC_OKCODE' '/00' .
perform bdc_dynpro using 'SAPLBG00' 1000 .
perform bdc_field using 'BDC_OKCODE' '=BUCH' .
perform bdc_field using 'BDC_SUBSCR'
'SAPLBG00 1101KOPF_1000'.
perform bdc_field using 'GBGMK-GAART' '2' .
perform bdc_field using 'GBGMK-GAERB' 'X' .
perform bdc_field using 'BDC_SUBSCR'
'SAPLBG00 1103TAB_SUB_1000'.
perform bdc_field using 'BDC_CURSOR' 'GBGMP-LSTNR(01)' .
perform bdc_field using 'GBGMP-LSTNR(01)' it_tab5-material .
call transaction 'BGM1' using it_tab3 mode 'E' messages into it_tab2
refresh it_tab3.
wa_tab1-pur_org = 'ABCP'.
loop at it_tab2.
endloop.
perform bdc_dynpro using 'SAPMM06I' 0100 .
perform bdc_field using 'BDC_CURSOR' 'EINE-EKORG' .
perform bdc_field using 'BDC_OKCODE' '/00' .
perform bdc_field using 'EINA-LIFNR' it_tab5-vendor .
perform bdc_field using 'EINA-MATNR' it_tab5-material .
perform bdc_field using 'EINE-EKORG' wa_tab1-pur_org .
perform bdc_field using 'RM06I-NORMB' 'X' .
perform bdc_dynpro using 'SAPMM06I' 0101 .
perform bdc_field using 'BDC_CURSOR' 'EINA-WGLIF' .
perform bdc_field using 'BDC_OKCODE' '=BU' .
perform bdc_field using 'EINA-WGLIF' it_tab2-msgv1 .
call transaction 'ME12' using it_tab3 mode 'E'.
refresh it_tab3.
refresh it_tab2.
endloop.
*& Form BDC_DYNPRO
Start new screen
-->P_FNAM text
-->P_FVAL text
form bdc_dynpro using program
dynpro.
clear it_tab3.
it_tab3-program = program.
it_tab3-dynpro = dynpro.
it_tab3-dynbegin = 'X'.
append it_tab3.
endform. " BDC_DYNPRO
*& Form BDC_FIELD
Insert field
-->P_FNAM text
-->P_FVAL text
form bdc_field using fnam
fval.
clear it_tab3.
it_tab3-fnam = fnam.
it_tab3-fval = fval.
append it_tab3.
endform. " BDC_FIELD
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 6:20 PM -
BDC Program for Sales order and Enquiry
Hi All,
Pls can you help me.
To create sales order and enquiry I have bapis .
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_INQUIRY_CREATEFROMDATA2
but i want BDC Programs for that bapis
pls can you help me
thanks
marsHi Krishna ,
Please check the below links .
[http://www.sap-basis-abap.com/abap/bapi-sample-to-upload-data-from-flat-file-to-va01.htm]
[http://abapreports.blogspot.com/2008/06/bapi-sample-code-for.html] -- > Select and Copy from this one. -
BAPI_INSPECTIONPLAN_CREATE -Program for uploading data
Hi,
we are having some difficulties in loaing data through LSMW -Direct input method.
I want to use BAPI_INSPECTIONPLAN_CREATE for uploading my data.
I am new to this type of loads.Any ideas?
regard
PraveenHello,
i see YSCI_MAEX_UPLOAD_R3 dveloped report by you. (starting with Y*)
When you directly updates tables you wont get any log, as soon as you report wont generate them.
Usually report should (after executed) generate spool when "WRITE" command is present.
Check when executed in background whether it does generate spool.
TA: SM37 in the "job log" check for spool.
@Anyway, standard log can be seen in GTS in TA: SLG1 (but this is not the case).
Best regards,
Gabriel.
@Spool can be easily downloaded to PC. -
What is the bdc program for vendor master?
what is the bdc program for vendor master?
Hi,
Find the code here.
And do create your text file data in the order of itab structure.
{report ZBDC_XK01
no standard page heading line-size 255.
data: bdcdata like bdcdata occurs 0 with header line.
data: begin of itab occurs 0,
lifnr like lfa1-lifnr,
bukrs like RF02K-bukrs,
ekorg like RF02K-ekorg,
ktokk like RF02K-ktokk,
anred like lfa1-anred,
name1 like lfa1-name1,
sortl like lfa1-sortl,
land1 like lfa1-land1,
spras like lfa1-spras,
waers like lfm1-waers,
end of itab.
selection-screen begin of block blk1 with frame.
parameters: p_file like rlgrap-filename OBLIGATORY.
selection-screen end of block blk1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
perform f4_help_p_file.
start-of-selection.
perform get_data.
perform upload.
END-OF-SELECTION.
*& Form f4_help_p_file
text
--> p1 text
<-- p2 text
form f4_help_p_file .
data: v_file like p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = v_file.
CHECK sy-subrc EQ 0.
p_file = v_file.
endform. " f4_help_p_file
*& Form get_data
text
--> p1 text
<-- p2 text
form get_data .
data: s_file type string.
s_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = s_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = 'D'
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
stop.
ENDIF.
endform. " get_data
*& Form upload
text
--> p1 text
<-- p2 text
form upload .
loop at itab.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-KTOKK'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR' itab-lifnr.
perform bdc_field using 'RF02K-BUKRS' '0001'.
perform bdc_field using 'RF02K-EKORG' '1000'.
perform bdc_field using 'RF02K-KTOKK' '0001'.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-SPRAS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-ANRED' itab-anred.
perform bdc_field using 'LFA1-NAME1' itab-name1.
perform bdc_field using 'LFA1-SORTL' itab-sortl.
perform bdc_field using 'LFA1-LAND1' itab-land1.
perform bdc_field using 'LFA1-SPRAS' itab-spras.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-AKONT'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS' itab-waers.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
call transaction 'XK01' using bdcdata mode 'A'.
refresh bdcdata.
clear itab.
endloop.
endform. " upload
*& Form bdc_dynpro
text
-->P_0126 text
-->P_0127 text
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform. " bdc_dynpro
*& Form bdc_field
text
-->P_0316 text
-->P_0317 text
form bdc_field using fnam fval.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endform. " bdc_field}
Reward points if you find it helpful
Thanks,
Prasanna -
Need bdc program for master recipe
Hi All,
Can any one please give me BDC code for Master Recipe Data Upload or is ther any standard program available to upload Master Recipe data?.
Regards
SathishHi,
Can you share the same to me as well.
as I also have the same requirement
Thanks -
BDC Program for posting FI document
Hi everyone!
Anyone out there already made a BDC program for posting FI documents with this concept:
User will upload a spreadsheet file with the line items per row
User will input which TCODE user will use for posting
BDC program will then post the document using the line items in the spreadsheet file
I need to make a BDC program with that concept but having a hard time to think of a good algorithm to make my program very flexible.
Thanks!you can use batch input program RFBIBL00 to pasrk document. Please check these links for more information.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADM/CAGTFADM-FI.pdf
http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/CAGTFADM-FI.pdf
Have a processing routine defined for the specific Idocs that come into SAP.
So, as and when the idocs are in, the routine triggers and you can codeappropriately in the routine for parking the idocs.
Check these threads
BAPI For Parking FI Document
Post FI Parked Documents
You can use message type INVOIC, IDoc Type INVOIC01/02 with process code INVF (FM IDOC_INPUT_INVOIC_FI) for FBV1 transaction.
See if there are any BAPI/FMs for parking an FI document.
1.. Use INVOIC01 IDOC with INVF process code (This works for Vendor Line Items only). I read the documentation somewhere that, this would work even if the line items are > 999
2.. BAPI_ACC_INVOICE_RECEIPT_POST (This works for Vendor Line Items only)
3.. BAPI_ACC_DOCUMENT_POST (Tax jurisdiction allocation not calculated properly)
4.. BAPI_ACC_GL_POSTING_POST (No tax line items allowed for this BAPI) -
BDC program for Other Goods receipts
Hi all,
I need BDC program for Other goods receipts,
I have data in excel like material, batch id, qty, actual width, length, plant etc. i want to upload this in one short based on the movement type.
Thanks in advance.
ShankarHi MP Shankar,
This is a sample BDC program .Use the format to develop your own BDC program.First record your trasnaction and use that recorded program here.Pass your filename here.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_ifile TYPE dxfile-filename.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-002.
PARAMETERS: p_sess RADIOBUTTON GROUP g3 "create session
DEFAULT 'X' USER-COMMAND bdc,
p_ctu RADIOBUTTON GROUP g3. "call transaction
SELECTION-SCREEN END OF BLOCK b3.
DATA : BEGIN OF itab OCCURS 0,
str TYPE string,
END OF itab,
l_file TYPE string,
t_bdcdata TYPE STANDARD TABLE OF bdcdata,
wa_bdcdata LIKE LINE OF t_bdcdata.
AT SELECTION SCREEN ON VALUE REQUEST
Value request for the filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_ifile.
PERFORM help_input_file.
START-OF-SELECTION.
CLEAR l_file.
l_file = p_ifile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_file
filetype = 'ASC'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
*Start new session
IF p_sess = 'X'.
PERFORM bdc_open.
ENDIF.
LOOP AT itab.
PERFORM creat_batch_input.
PERFORM bdc_insert.
IF p_ctu = 'X'.
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'A'.
ENDIF.
ENDLOOP.
IF p_sess = 'X'.
PERFORM bdc_close .
ENDIF.
*& Form bdc_open
text
--> p1 text
<-- p2 text
FORM bdc_open .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = 'ZMUK'
user = sy-uname
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11.
ENDFORM. " bdc_open
*& Form creat_batch_input
text
--> p1 text
<-- p2 text
FORM creat_batch_input .
use your own recorded program here.
PERFORM bdc_dynpro USING 'SAPLWBABAP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=STRT'.
PERFORM bdc_field USING 'RS38M-PROGRAMM'
itab-str.
PERFORM bdc_field USING 'RS38M-FUNC_EDIT'
'X'.
PERFORM bdc_dynpro USING 'SAPLSLVC_FULLSCREEN' '0500'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=&F03'.
PERFORM bdc_dynpro USING 'SAPLWBABAP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BACK'.
PERFORM bdc_field USING 'RS38M-PROGRAMM'
itab-str.
PERFORM bdc_field USING 'RS38M-FUNC_EDIT'
'X'.
ENDFORM. " creat_batch_input
*& Form bdc_insert
text
--> p1 text
<-- p2 text
FORM bdc_insert .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = 'SE38'
TABLES
dynprotab = t_bdcdata
EXCEPTIONS
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
printing_invalid = 5
posting_invalid = 6
OTHERS = 7.
ENDFORM. " bdc_insert
*& Form bdc_dynpro
text
-->P_0168 text
-->P_0169 text
FORM bdc_dynpro USING p_program TYPE any
p_dynpro TYPE any.
CLEAR wa_bdcdata.
wa_bdcdata-program = p_program.
wa_bdcdata-dynpro = p_dynpro.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO t_bdcdata.
ENDFORM. " bdc_dynpro
*& Form bdc_field
text
-->P_0179 text
-->P_0180 text
FORM bdc_field USING p_fnam TYPE any
p_fval TYPE any.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = p_fnam.
wa_bdcdata-fval = p_fval.
CONDENSE wa_bdcdata-fval.
APPEND wa_bdcdata TO t_bdcdata.
ENDFORM. " bdc_field
*& Form bdc_close
text
--> p1 text
<-- p2 text
FORM bdc_close .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
ENDFORM. " bdc_close
*& Form help_input_file
text
--> p1 text
<-- p2 text
FORM help_input_file .
DATA: lt_file_table TYPE filetable,
la_file_table LIKE LINE OF lt_file_table,
l_rc TYPE i,
l_pcdsn TYPE cffile-filename.
REFRESH lt_file_table.
CLEAR la_file_table.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
CHANGING
file_table = lt_file_table
rc = l_rc.
READ TABLE lt_file_table INTO la_file_table INDEX 1.
l_pcdsn = la_file_table-filename.
MOVE l_pcdsn TO p_ifile.
ENDFORM. " help_input_file -
BDC Program for MB1B Screen..
Hi Abapers..
I am doing BDC Upload program using MB1B Screen. I put the receiving bin but the following error coming..
" CALL_TRANSACTION MB1B Return code = 1,001 RECORD: 0
S The Receiving batch will be automatically set to G02
W Batch G02 has already been posted in stock
S No batch input data for screen SAPLKACB 0002"
What is the error? how to rectify that error. anybody please give the solution of this problem.
Give me source code for this bdc program for MB1B Screen.
This is very urgent I will give reward points..
Thanks
S.Muthu.Hi Siddu,
Thanks Very much. My Solution solved by You. I given reward points.
Thanks a lot.
I created BAPI_GOODSMVT_CREATE now its working.
Regards,
S.Muthu. -
What is the method used for upload of data
Hi All,
What is the method used for upload of Data from excel spread sheets to SAP HR.
it is Bulk Data from many countries.LSMW or BDC Session Method?
what are country specific infotypes used for PA and OM.
can u plz give the list of country specific infotypes used for PA n OM Module.
Thanks
ArchanaHi Archana,
To Upload bulk data I think BDC is the best and effecient way.
Regarding Infotypes we dont have any country specific Infotypes in OM & PA. In Payroll we do have according to country wise.
I hope you had understood the point
Regards
Pavani
Remainder: Points to be given on answers -
Standard program for uploading of IDOCs - CREMAS
Dear SAP gurus,
I would like to ask you if there exists some standard program for uploading IDOCs messages - type CREMAS (Vendor master data).
Thank you in advance.
AlenaHas not been solved.
Maybe you are looking for
-
Disable esmtp Inspection for Specific Host
Hello. Is it possible to disable esmtp inspection for a specific INSIDE host with use of a policy-map? If so, could you provide an example configuration.
-
Connect iPod to MacBook Pro audio line-in port?
My 1st Gen iPod's Firewire port fried recently; it still delivers a charge to my iPod but won't allow it to mount. I can still listen to music with the headphone jack. What sort of cable can I use to attach my iPod to the audio line-in on my Macbook
-
Lion does not allow disk sleep?
Background: MacBook Pro 17" Early 2011 MC725LL/A Mac OS X Lion 10.7.1 Lion OS is installed to SSD located in OptiBay. Synopsis: Lion OS prevents my HDD drive located in primary HDD slot from sleeping: HDD spins up every few minutes. I do not manually
-
Query using Appends, Lookups and Functions?
I'm new to SQL, databases and APEX! I'm sure this is very easy for you all, but I've been racking my brains for two days on this; time for the experts. My very simple query is: select first_name||' '||middle_name||' '||last_name "Full Name" from name
-
What's the role of 'throws' clause in method overriding
I'm getting error when subclass "Parser" overrides method 'getInt()' which throws Exception but super class version don't. It is compiling without error when vice versa is true i.e., super class version throws exception but sub class version don't th