BDC recording for SU01 - Roles
Hi All ,
I am using BDC recoording of the SU01 T code for the modification of the end date of the assigned roles .
In few scenario there are few cases where user does have direct and indirect roles . I am able to change the end date of the direct roles via BDC in SU01 but since indirect roles which are depedent on direct roles and therefore the end date fields is not editable and hence on the warning my BDC is unable to update anything in SU01 .
Can any one advise , how can i proceed with BDC recording to capture editable and noneditable fields ?
Hi,
it's not possible with BDC recording to know if a field is in input mode or only in output mode.
PS : Search if you cannot used a BAPI. f.e BAPI_USER_*
REM : Just one remark if you use time assignment
Time-dependency of user assignment and authorizations
o If you are also using the role to generate authorization profiles,
then you should note that the generated profile is not entered in
the user master record until the user master records have been
compared. When you specify the users for the role, the system enters
by default the current date as the start date of the user
assignment, and 12.31.9999 as the end date. If you want to restrict
the start and end dates of the assignment, for example, if you want
to define a temporary substitute for a user, the system
automatically makes the changes to the user. This automatic
adjustment of the user's authorizations is executed using report
PFCG_TIME_DEPENDENCY. In this case, you should schedule report
PFCG_TIME_DEPENDENCY daily, for example, early in the morning, to
run in the background (in transaction SA38, for example). This
compares the user master records for all roles and updates the
authorizations for the user master records. The system removes
authorization profiles for invalid user assignments from the user
master record, and enters authorization profiles from valid user
assignments to a role.
Similar Messages
-
Create BDC recording for position,job,role
hi all,
i want to create BDC recording for position,job,role . what is the transaction for creating postion,job, role?/??
and i have to check wheather for one job , role is there or not? if not i have to create that role.. similiarly i have to check for position that there is corresponding job is there or not.. if not i have to create the job???
how would i do that??
thanks
SAchinHi Sachin,
1) Creating BDC is an ABAP-ers job and being functional its not ur responsibility. If u really want to do that then u can do it through T.Code - SHDB.
While creating BDC for Position u have to go through T.Cdoe - SHDB and in that give PP01 in the TRANSACTION CODE feild. Then go on for recording. After that ask the help of an ABAP-er.
2) To Check if a POSITION or a JOB is there, then Go to T.Code - PP01, under Obj Abbr. feild put S for POSITION and C for JOB and press enter after entering the POSITION and JOB id. U'll get the result. OK
3) To check for ROLE, u have go to T.Code - PFCG and there check for the particular ROLE u r looking for. Here in this T.Code u can actually create, change and delete the ROLES.OK
Hope this helps,
ARNAV... -
BDC recording for s_alr_87012090
Hi Friends,
My requirement :
As we do vendor changes in xk02, the critical data like bank details, name and address are to be confirmed. so my client want, the changes done in address should not got to confirmation, so I want to do BDC recording for S_ALR_87012090 ( confir vendor changes ). and will check if only address changes are done then i will run these BDC recording .
but i am unable to do recording.
please help me out.
regards
Kumar MHello Kumar M,
What is the issue with it? Why cant you do the recording?
BR,
Suhas -
Bdc recording for XK02 to change vendor address
Dear All,
I am trying to create a bdc recording for XK02 transaction to change Address fields ( Name1 ... Name4 , House num1, street , House number supplement , city , State , Postal code etc .)
When i open the transaction XK02 by clicking address, I see all the above fields.
But when i try to create a recording for the same XK02 transaction through SM35, I see House no & Street as one field and House number supplement missing.
Please let me know how can i update House num1 , Street and House num supplement seperately.
Thanks,
HimaPlease chekc you entry in Country & Region.
The region should belong to the country.
Regards
Bhavesh MIstry -
hi
i have been asked to do bdc recording for the transaction mek1 through the call transaction method.can u people plss tell me how to go abt it?Hi,
You can Record using the Tcode SHDB and format the program and use.
You can use VK11 tcode also which is similar to MEK1.
see the sample code for VK11 ; You can change as per your requirement.
report ZSDBDCP_PRICING no standard page heading
line-size 255.
Includes
include zbdcrecx1.
Internal Tables
*--Internal Table To hold condition records data from flat file.
Data: begin of it_pricing occurs 0,
key(4),
f1(4),
f2(4),
f3(2),
f4(18),
f5(16),
end of it_pricing.
*--Internal Table To hold condition records header .
data : begin of it_header occurs 0,
key(4),
f1(4),
f2(4),
f3(2),
end of it_header.
*--Internal Table To hold condition records details .
data : begin of it_details occurs 0,
key(4),
f4(18),
f5(16),
end of it_details.
data : v_sno(2),
v_rows type i,
v_fname(40).
start-of-selection.
refresh : it_pricing,it_header,it_details.
clear : it_pricing,it_header,it_details.
CALL FUNCTION 'UPLOAD'
EXPORTING
FILENAME = 'C:\WINDOWS\Desktop\pricing.txt'
FILETYPE = 'DAT'
TABLES
DATA_TAB = it_pricing
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7.
WRITE : / 'Condition Records ', P_FNAME, ' on ', SY-DATUM.
OPEN DATASET P_FNAME FOR INPUT IN TEXT MODE.
if sy-subrc ne 0.
write : / 'File could not be uploaded.. Check file name.'.
stop.
endif.
CLEAR : it_pricing[], it_pricing.
DO.
READ DATASET P_FNAME INTO V_STR.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
write v_str.
translate v_str using '#/'.
SPLIT V_STR AT ',' INTO it_pricing-key
it_pricing-F1 it_pricing-F2 it_pricing-F3
it_pricing-F4 it_pricing-F5 .
APPEND it_pricing.
CLEAR it_pricing.
ENDDO.
IF it_pricing[] IS INITIAL.
WRITE : / 'No data found to upload'.
STOP.
ENDIF.
loop at it_pricing.
At new key.
read table it_pricing index sy-tabix.
move-corresponding it_pricing to it_header.
append it_header.
clear it_header.
endat.
move-corresponding it_pricing to it_details.
append it_details.
clear it_details.
endloop.
perform open_group.
v_rows = sy-srows - 8.
loop at it_header.
perform bdc_dynpro using 'SAPMV13A' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RV13A-KSCHL'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RV13A-KSCHL'
it_header-f1.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_CURSOR'
'KONP-KBETR(01)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KOMG-VKORG'
it_header-f2.
perform bdc_field using 'KOMG-VTWEG'
it_header-f3.
**Table Control
v_sno = 0.
loop at it_details where key eq it_header-key.
v_sno = v_sno + 1.
clear v_fname.
CONCATENATE 'KOMG-MATNR(' V_SNO ')' INTO V_FNAME.
perform bdc_field using v_fname
it_details-f4.
clear v_fname.
CONCATENATE 'KONP-KBETR(' V_SNO ')' INTO V_FNAME.
perform bdc_field using v_fname
it_details-f5.
if v_sno eq v_rows.
v_sno = 0.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'=P+'.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endif.
endloop.
*--Save
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_transaction using 'VK11'.
endloop.
perform close_group.
Regards,
Anji -
Bdc recording for trancastion ME01
Hi,
Can u help me in BDC recording for transaction 'ME01' .
I have no idea for transaction 'ME01' & here i like to know how to handle table ctr during bdc recording?
give sample code if possible.
ThanksSee the sample attached code for ME51 using table control.
similarly record the same for ME01 and copy the TC logic from this.
REPORT zmm_pr_upload_mat
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
lpein(001), " Category of Del Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
Item Details
matnr(018), " Material No
menge(017), " Quantity
badat(010),
frgdt(010),
preis(014), " Valuation Price
waers(005), " Currency
peinh(005),
wepos(001),
repos(001),
sakto(010), " GL Account
kostl(010), " Cost Center
bnfpo(005),
END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
sno(3), " SNo
matnr(018), " Material No
menge(017), " Quantity
preis(014), " Valuation Price
sakto(010), " GL Account
kostl(010), " Cost Center
END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
v_rowno(5), " Row No
v_2(2), " Counter
v_rows LIKE sy-srows, " Rows in TC
v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_pr
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
MOVE-CORRESPONDING i_pr TO it_item.
APPEND it_item.
CLEAR it_item.
AT END OF sno.
READ TABLE i_pr INDEX sy-tabix.
MOVE-CORRESPONDING i_pr TO it_header.
APPEND it_header.
CLEAR it_header.
ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-BEDNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-BSART'
it_header-bsart.
PERFORM bdc_field USING 'RM06B-EPSTP'
it_header-epstp.
PERFORM bdc_field USING 'EBAN-KNTTP'
it_header-knttp.
PERFORM bdc_field USING 'RM06B-EEIND'
it_header-eeind.
PERFORM bdc_field USING 'RM06B-LPEIN'
it_header-lpein.
PERFORM bdc_field USING 'EBAN-WERKS'
it_header-werks.
PERFORM bdc_field USING 'EBAN-LGORT'
it_header-lgort.
PERFORM bdc_field USING 'EBAN-EKGRP'
it_header-ekgrp.
PERFORM bdc_field USING 'EBAN-MATKL'
it_header-matkl.
PERFORM bdc_field USING 'EBAN-BEDNR'
it_header-bednr.
PERFORM bdc_field USING 'EBAN-AFNAM'
it_header-afnam.
Item Details
v_l = 0.
To add no. of rows
v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
v_rowno = 130 .
LOOP AT it_item WHERE sno = it_header-sno.
v_l = v_l + 1.
IF v_l = 14 .
IF v_2 = 12 .
v_2 = 12 .
v_l = 2 .
From second time onwards it is displaying 12 rows only
v_rowno = v_rowno + 120 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ELSE.
V_2 initialized to 12 for second screen purpose
v_2 = 12 .
v_l = 2 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno .
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CLEAR v_field.
CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-matnr.
CLEAR v_field.
CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-menge.
PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-PREIS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-PREIS'
it_item-preis.
PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBKN-SAKTO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'EBKN-SAKTO'
it_item-sakto.
Cost Center
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-KOSTL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-KOSTL'
it_item-kostl.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
Call The Transaction
PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
reward if useful
Regards
Vasu -
BDC recording for transaction 'Me01'
Hi,
Can u help me in BDC recording for transaction 'ME01' .
I have no idea for transaction 'ME01' .
give sample code if possible.
ThanksFor creating source list you will check that purchasing view has been maintained for this material
Source list for resticting, purcasing a material from a specific vendor only for the period specified in source list
Regards,
Amit R. -
Hi,
I am asked to do bdc recording for the transaction sm30 through call transaction method. Can u please tell me how to do that...Hi Buvana,
While recording just mentioned the tcode as SM30 and then it takes you automaticcaly to that transaction code then enter the table name and press maintain tab and then select new entreis. Enter the values then save it. Press back button. Now it will take return to recording section. now u can able to see the recoding section. Generate the program automaticcaly from the recording. Now take neccessary internal tables and complete the code. Reply for any queries and reward for useful points. Take care while recording. Don't mention any wrong values.
Regards,
Kumar. -
BDC Recording for cm07 Transaction
Hi Everyone,
I'm doing BDC recording for CM07 transaction. In Recording, i need to give a print command by specifying the spool title.
For this, after opening the print window, i need to click the 'properties' button, and then select the spool title and input the value.
But I'm unable to do the recording of this print dialog box. The recording ends as soon as I give the print command.
Can anyone please tell me the solution to it.
Thanks and Regards
Rishika bawaHi,
See via transaction SHDB:
SAPLCORU_S 0100 X
BDC_OKCODE BU
AFRUD-RUECK 0000000000
AFRUD-AUFNR 100051152
AFRUD-VORNR 0010
AFRUD-LMNGA 100,000
AFRUD-MEINH PC
AFRUD-XMNGA 2,000
AFRUD-ISM01 200
AFRUD-ILE01 PC
The table for confirmations is AFRU.
Best regards,
Leandro Mengue -
hi all,
how to do bdc recording for AS01.please send me step step by approach.Hi Satya,
Welcome to SDN.
Check this Sample program.
REPORT ZASSET .
INCLUDE ZASSET_INC .
PARAMETERS: P_PCFILE LIKE RLGRAP-FILENAME.
*PARAMETERS: P_FILE_S LIKE RLGRAP-FILENAME.
PARAMETER : H_CHK AS CHECKBOX.
"Proc Mode
Include the BDC *
**BDC DATA STUCTURE
*DATA: BEGIN OF BDCDATA OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
*DATA: END OF BDCDATA.
messages of call transaction
*DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
TYPE-POOLS
TYPE-POOLS TRUXS.
DATA IT_DATA1 TYPE TRUXS_T_TEXT_DATA.
DATA : BEGIN OF IT_DATA OCCURS 0,
INVZU(015),
ANLKL(008),
BUKRS(004),
TXT50(100),
SERNR(018),
MENGE(018),
INKEN(001),
AKTIV(010),
KOSTL(010),
WERKS(004),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ(001),
LIFNR(010),
AFASL(004),
NDJAR(003),
AFABG(010),
ANLGR(012),
ANLGR2(004),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
TDATE(010),
TCODE(004),
TAMT(018),
PERNR(012),
KFZKF(015),
SAP_ASSET(12),
ERR_ASSET,
END OF IT_DATA.
DATA : BEGIN OF IT_DATA2 OCCURS 0,
INVZU(015),
TDATE(010),
TCODE(004),
TAMT(018),
END OF IT_DATA2.
DATA : BEGIN OF IT_DATA3 OCCURS 0,
ITEM(003),
INVZU(015),
ANLKL(010),
BUKRS(010),
TXT50(050),
SERNR(018),
MENGE(018),
INKEN(001),
AKTIV(010),
KOSTL(010),
WERKS(004),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ(001),
LIFNR(010),
AFASL(004),
NDJAR(003),
AFABG(010),
ANLGR(012),
ANLGR2(004),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
TDATE(010),
TCODE(004),
TAMT(018),
SAP_ASSET(12),
ERR_ASSET,
END OF IT_DATA3.
SUB ASSET MASTER TABLE
DATA : BEGIN OF IT_DATA_SUB OCCURS 0,
INVZU_M(015),
INVZU(015),
BUKRS(004),
TXT50(100),
ANLHTXT(050),
SERNR(018),
MENGE(018),
MEINS_007(003),
XHIST_008(001),
AKTIV(010),
GSBER_011(004),
KOSTL(010),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ_016(001),
LIFNR(010),
LIEFE(030),
NDJAR(003),
NDPER(003),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
BZDAT(010),
BWASL(003),
ANBTR01(016),
ANLN1(012),
ERR_SUB,
SUB_CODE(012),
ERR_SUB1,
END OF IT_DATA_SUB.
*& At selection-screen on value request for getting f4 help
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PCFILE.
PERFORM VALUE_REQUEST_P_FILE.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE_S.
PERFORM VALUE_REQUEST_P_FILE_S.
START OF SELECTION *
START-OF-SELECTION.
To Upload the flat file datas *
PERFORM GET_DATA.
PERFORM UP_LOAD.
PERFORM SUB_UPLOAD.
WRITE :/ 'FOLLOWING ASSETS CREATED'.
WRITE:/ 'OLD ASSET'.
WRITE: 20 'COMPANY'.
WRITE: 30 'SAP CODE'.
LOOP AT IT_DATA WHERE ERR_ASSET NE 'X'.
WRITE :/ IT_DATA-INVZU,
20 IT_DATA-BUKRS, 30 IT_DATA-SAP_ASSET.
ENDLOOP.
SKIP 2.
WRITE :/ 'FOLLOWING SUB ASSETS CREATED'.
WRITE:/ 'OLD ASSET'.
WRITE: 16 'OLD SUB ASSET'.
WRITE: 35 'COMPANY'.
WRITE: 45 'SAP CODE'.
WRITE: 60 'SUB ASSET'.
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X' AND ERR_SUB1 NE 'X'.
WRITE :/ IT_DATA_SUB-INVZU_M,
16 IT_DATA_SUB-INVZU,
35 IT_DATA_SUB-BUKRS, 45 IT_DATA_SUB-ANLN1, 60
*IT_DATA_SUB-SUB_CODE.
ENDLOOP.
*& Form value_request_p_file
FORM VALUE_REQUEST_P_FILE .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'x'
IMPORTING
FILE_NAME = P_PCFILE.
ENDFORM. " value_request_p_file
*& Form UP_LOAD
text
--> p1 text
<-- p2 text
FORM UP_LOAD .
SORT IT_DATA BY INVZU.
SORT IT_DATA2 BY INVZU.
DATA : V_LEN1 TYPE I, V_LEN2 TYPE I, V_SUBSTR1(50) ,V_SUBSTR2(50).
perform open_dataset using dataset.
PERFORM OPEN_GROUP.
LOOP AT IT_DATA.
CONDENSE IT_DATA-TXT50.
V_LEN1 = STRLEN( IT_DATA-TXT50 ).
IF V_LEN1 > 50.
V_SUBSTR1 = IT_DATA-TXT50+0(50).
V_LEN2 = V_LEN1 - 50.
V_SUBSTR2 = IT_DATA-TXT50+50(50).
ELSE.
V_SUBSTR1 = IT_DATA-TXT50.
V_SUBSTR2 = ''..
ENDIF.
REFRESH BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0105'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-BUKRS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'ANLA-ANLKL'
IT_DATA-ANLKL.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
V_SUBSTR1. "IT_DATA-TXT50.
PERFORM BDC_FIELD USING 'ANLA-TXA50'
V_SUBSTR2.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA-MENGE.
*perform bdc_field using 'ANLA-INKEN'
record-INKEN_006.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-PERNR'.
PERFORM BDC_FIELD USING 'ANLZ-PERNR'
IT_DATA-PERNR.
PERFORM BDC_FIELD USING 'ANLZ-KOSTL'
IT_DATA-KOSTL.
PERFORM BDC_FIELD USING 'ANLZ-WERKS'
IT_DATA-WERKS.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA-STORT.
IF IT_DATA-ANLKL = 'VHCL'.
PERFORM BDC_FIELD USING 'ANLZ-KFZKZ'
IT_DATA-KFZKF.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD42'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA-ORD42.
*perform bdc_field using 'RA02S-EQANZ'
record-EQANZ_014.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB06'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA-LIFNR.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLV-VSART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RA02S-XAKPLA(02)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-AFASL'.
IF IT_DATA-TCODE IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
ENDIF.
PERFORM BDC_FIELD USING 'ANLB-ANLGR'
IT_DATA-ANLGR.
PERFORM BDC_FIELD USING 'ANLB-ANLGR2'
IT_DATA-ANLGR2.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
IF IT_DATA-TCODE IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA-ANBTR01_01.
IF H_CHK NE 'X'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA-ANBTR01_06.
ENDIF.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA-TDATE.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA-TCODE.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA-TAMT.
ENDIF.
REFRESH MESSTAB.
CALL TRANSACTION 'AS91' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
PERFORM BDC_TRANSACTION USING 'AS91'.
ENDLOOP..
PERFORM CLOSE_GROUP.
*perform close_dataset using dataset.
ENDFORM. " UP_LOAD
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_TAB_RAW_DATA = IT_DATA1
I_FILENAME = P_PCFILE
TABLES
I_TAB_CONVERTED_DATA = IT_DATA.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IT_DATA3.
IF IT_DATA3-ITEM = '1'.
MOVE-CORRESPONDING IT_DATA3 TO IT_DATA.
APPEND IT_DATA.
ELSEIF IT_DATA3-ITEM = '2'.
IT_DATA2-INVZU = IT_DATA3-INVZU.
IT_DATA2-TDATE = IT_DATA3-ANLKL.
IT_DATA2-TCODE = IT_DATA3-BUKRS.
IT_DATA2-TAMT = IT_DATA3-TXT50.
APPEND IT_DATA2.
ENDIF.
ENDLOOP.
IF NOT P_FILE_S IS INITIAL.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_TAB_RAW_DATA = IT_DATA1
I_FILENAME = P_FILE_S
TABLES
I_TAB_CONVERTED_DATA = IT_DATA_SUB.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " GET_DATA
FORM BDC_DYNPRO
--> PROGRAM
--> DYNPRO
**FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
**ENDFORM. " BDC_DYNPRO
FORM BDC_FIELD
--> FNAM
--> FVAL
**FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
**ENDFORM. "BDC_FIELD
***& Form bdc_transaction
text
-->TCODE text
**FORM BDC_TRANSACTION USING TCODE.
REFRESH MESSTAB.
CALL TRANSACTION TCODE USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
**ENDFORM. " bdc_transaction
*& Form VALUE_REQUEST_P_FILE_S
text
--> p1 text
<-- p2 text
FORM VALUE_REQUEST_P_FILE_S .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'x'
IMPORTING
FILE_NAME = P_FILE_S.
ENDFORM. " VALUE_REQUEST_P_FILE_S
*& Form sUB_upload
text
--> p1 text
<-- p2 text
***FORM SUB_UPLOAD .
DATA : V_LEN1 TYPE I, V_LEN2 TYPE I, V_SUBSTR1(50) ,V_SUBSTR2(50).
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X'.
CONDENSE IT_DATA_SUB-TXT50.
V_LEN1 = STRLEN( IT_DATA_SUB-TXT50 ).
IF V_LEN1 > 50.
V_SUBSTR1 = IT_DATA_SUB-TXT50+0(50).
V_LEN2 = V_LEN1 - 50.
V_SUBSTR2 = IT_DATA_SUB-TXT50+50(50).
ELSE.
V_SUBSTR1 = IT_DATA_SUB-TXT50.
V_SUBSTR2 = ''..
ENDIF.
REFRESH BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=MAST'.
PERFORM BDC_FIELD USING 'ANLA-ANLN1'
IT_DATA_SUB-ANLN1.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA_SUB-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
V_SUBSTR1. "IT_DATA_SUB-TXT50.
PERFORM BDC_FIELD USING 'ANLA-TXa50'
V_SUBSTR2. "IT_DATA_SUB-TXT50.
****perform bdc_field using 'ANLH-ANLHTXT'
it_data_sub-ANLHTXT_004.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA_SUB-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA_SUB-MENGE.
****perform bdc_field using 'ANLA-MEINS'
it_data_sub-MEINS_007.
****perform bdc_field using 'RA02S-XHIST'
it_data_sub-XHIST_008.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA_SUB-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA_SUB-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-GSBER'.
****perform bdc_field using 'ANLZ-GSBER'
it_data_sub-GSBER_011.
****perform bdc_field using 'ANLZ-KOSTL'
it_data_sub-KOSTL_012.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA_SUB-STORT.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD41'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA_SUB-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA_SUB-ORD42.
****perform bdc_field using 'RA02S-EQANZ'
it_data_sub-EQANZ_016.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB07'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA_SUB-LIFNR.
****perform bdc_field using 'ANLA-LIEFE'
IT_DATA_SUB-LIEFE.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LEART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'T093T-AFBKTX(01)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-NDPER'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
PERFORM BDC_FIELD USING 'ANLB-NDJAR'
IT_DATA_SUB-NDJAR.
PERFORM BDC_FIELD USING 'ANLB-NDPER'
IT_DATA_SUB-NDPER.
****perform bdc_field using 'ANLB-AFABG'
record-AFABG_029.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
IF IT_DATA_SUB-BWASL IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01_01.
Accu deprn automatically calculated by system changed on 6th Aug.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA_SUB-ANBTR01_06.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA_SUB-BZDAT.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA_SUB-BWASL.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
****perform bdc_transaction using 'AS94'.
ENDIF.
REFRESH MESSTAB.
CALL TRANSACTION 'AS94' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
IF SY-SUBRC = 0.
READ TABLE MESSTAB INDEX 1.
IT_DATA_sub-SUB_CODE = MESSTAB-MSGV1.
DATA AN1 TYPE ANLN1.
DATA AN2 TYPE ANLN2.
GET PARAMETER ID 'AN2' FIELD AN2.
IT_DATA_SUB-SUB_CODE = AN2. "MESSTAB-MSGV1.
MODIFY IT_DATA_SUB TRANSPORTING SUB_CODE.
ELSE.
IT_DATA_SUB-ERR_SUB1 = 'X'.
MODIFY IT_DATA_SUB TRANSPORTING ERR_SUB1.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
***ENDFORM. " sUB_upload
****& Form SUB_UPLOAD1
text
***FORM SUB_UPLOAD1 .
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=MAST'.
PERFORM BDC_FIELD USING 'ANLA-ANLN1'
IT_DATA_SUB-ANLN1.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA_SUB-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
IT_DATA_SUB-TXT50.
****perform bdc_field using 'ANLH-ANLHTXT'
it_data_sub-ANLHTXT_004.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA_SUB-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA_SUB-MENGE.
****perform bdc_field using 'ANLA-MEINS'
it_data_sub-MEINS_007.
****perform bdc_field using 'RA02S-XHIST'
it_data_sub-XHIST_008.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA_SUB-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA_SUB-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-GSBER'.
****perform bdc_field using 'ANLZ-GSBER'
it_data_sub-GSBER_011.
****perform bdc_field using 'ANLZ-KOSTL'
it_data_sub-KOSTL_012.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA_SUB-STORT.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD41'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA_SUB-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA_SUB-ORD42.
****perform bdc_field using 'RA02S-EQANZ'
it_data_sub-EQANZ_016.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB07'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA_SUB-LIFNR.
****perform bdc_field using 'ANLA-LIEFE'
IT_DATA_SUB-LIEFE.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LEART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'T093T-AFBKTX(01)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-NDPER'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
PERFORM BDC_FIELD USING 'ANLB-NDJAR'
IT_DATA_SUB-NDJAR.
PERFORM BDC_FIELD USING 'ANLB-NDPER'
IT_DATA_SUB-NDPER.
****perform bdc_field using 'ANLB-AFABG'
record-AFABG_029.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01_01.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA_SUB-ANBTR01_06.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA_SUB-BZDAT.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA_SUB-BWASL.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
****perform bdc_transaction using 'AS94'.
REFRESH MESSTAB.
CALL TRANSACTION 'AS94' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
IF SY-SUBRC = 0.
READ TABLE MESSTAB INDEX 1.
IT_DATA_sub-SUB_CODE = MESSTAB-MSGV1.
DATA AN1 TYPE ANLN1.
DATA AN2 TYPE ANLN2.
GET PARAMETER ID 'AN2' FIELD AN2.
IT_DATA_SUB-SUB_CODE = AN2. "MESSTAB-MSGV1.
MODIFY IT_DATA_SUB TRANSPORTING SUB_CODE.
ELSE.
IT_DATA_SUB-ERR_SUB1 = 'X'.
MODIFY IT_DATA_SUB TRANSPORTING ERR_SUB1.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
***ENDFORM. " sUB_upload
and one more thing i face some issues when doing bdc for AS01, so i use AS91 and AS92 for uploading by using LSMW (direct input method and recording method) and it was successful.(if u have to do coding go for BDC/BAPI or there is no coding better to choose LSMW (it is the easiest way) as of my knowledge, so before starting just analyze once which method is best for ur requirement.
Reward Points for Useful Answers
Thanks
Naveen khan
Message was edited by:
Pattan Naveen -
BDC Recording for Sorting a coloum
Hi All,
I have to do BDC Recording for a transaction.During recording i have to select a coloum and sort it ascending and then do further processing.
BDC recording happens for sorting but not for selecting coloum.
and hence it gives error when we process the recording that "Select a coloum".
can u plz tell me how to add seelcting coloum in BDC recorording.
ThanksHi,
You should try to incorporate your functionality using FIND or POSITION button instead of going for sort option.
Find or position button work very good in this scenerio. With find button you can find the desired entry easily.
Hope this will solve your problem.
Regards,
Brajvir -
BDC Recording For J1IG with Table Control Scroll bar
Dear Friends,
I am doing BDC program for J1IG Transaction after done recording.
As you knows that, In J1IG transaction max. 11 materials are shows in table control at a time and if more records are there, then we have to scroll down manually so after that, we can see the records.
Now my BDC program runs upto 11 materials but when more than 11 materials, selection is coming on first material only and cursor not showing 12th material.
So i think page down is not working for that issue.
I have seen lots of search forum for that but not getting the proper answer.
Please reply.
Regards,
Shivam.Dear Dinu,
For better understanding please see the code.
So you suggest what should i have to do?.
LOOP AT jtab INTO wb.
LOOP AT itab INTO wa WHERE mblnr EQ wb-mblnr.
CLEAR : flag.
AT NEW mblnr.
flag = 'X'.
CLEAR : cnt, var1, var2.
ENDAT.
cnt = cnt + 1.
IF flag EQ 'X'.
PERFORM bdc_dynpro USING 'SAPMJ1IG' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ECAP'.
PERFORM bdc_dynpro USING 'SAPMJ1IG' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'T_HEADER-EXDAT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'J_1IEXCHDR-EXGRP'
wa-exgrp.
PERFORM bdc_field USING 'T_HEADER-MBLNR'
wa-mblnr.
PERFORM bdc_field USING 'T_HEADER-MJAHR'
wa-mjahr.
PERFORM bdc_field USING 'T_HEADER-EXNUM'
wa-exnum.
PERFORM bdc_field USING 'T_HEADER-EXDAT'
wa-exdat.
PERFORM bdc_dynpro USING 'SAPMJ1IG' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'J_1IEXCHDR-EXGRP'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=DETL'.
ENDIF.
CONCATENATE 'T_ITEM-ZEILE(' cnt ')' INTO var1.
CONCATENATE 'T_ITEM-SELECTION(' cnt ')' INTO var2.
PERFORM bdc_dynpro USING 'SAPMJ1IG' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
var1. "'T_ITEM-ZEILE(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=MORE'.
PERFORM bdc_field USING var2 "'T_ITEM-SELECTION(01)'
'X'. "record-selection_01_019.
PERFORM bdc_dynpro USING 'SAPMJ1IG' '0400'.
PERFORM bdc_field USING 'BDC_CURSOR'
'T_LOCAL_EXC-EXADDRATE1(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'T_LOCAL_EXC-MENGE(01)'
wa-menge.
PERFORM bdc_field USING 'T_LOCAL_EXC-EXBAS(01)'
wa-exbas.
PERFORM bdc_field USING 'T_LOCAL_EXC-EXBED(01)'
wa-exbed.
PERFORM bdc_field USING 'T_LOCAL_EXC-BEDRATE(01)'
wa-bedrate.
PERFORM bdc_field USING 'T_LOCAL_EXC-EXAED(01)'
wa-exaed.
PERFORM bdc_field USING 'T_LOCAL_EXC-AEDRATE(01)'
wa-aedrate.
PERFORM bdc_field USING 'T_LOCAL_EXC-ECS(01)'
wa-ecs.
PERFORM bdc_field USING 'T_LOCAL_EXC-ECSRATE(01)'
wa-ecsrate.
PERFORM bdc_field USING 'T_LOCAL_EXC-EXADDTAX1(01)'
wa-exaddtax1.
PERFORM bdc_field USING 'T_LOCAL_EXC-EXADDRATE1(01)'
wa-exaddrate1.
PERFORM bdc_dynpro USING 'SAPMJ1IG' '0400'.
PERFORM bdc_field USING 'BDC_CURSOR'
'T_LOCAL_EXC-RG23ASER(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BACK'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMJ1IG' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
'T_ITEM-DOCNO(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
CLEAR opt.
opt-dismode = 'A'.
opt-updmode = 'S'.
* opt-defsize = '12'.
* CLEAR: it_messages[], it_messages.
CALL TRANSACTION 'J1IG' USING it_bdcdata OPTIONS FROM opt
MESSAGES INTO it_messages.
REFRESH it_bdcdata.
ENDLOOP.
CHECK it_messages[] IS NOT INITIAL.
LOOP AT it_messages.
PERFORM fill_messages USING it_messages-msgtyp
it_messages-msgid
it_messages-msgnr
it_messages-msgv1
it_messages-msgv2
it_messages-msgv3
it_messages-msgv4.
ENDLOOP.
PERFORM display_messages TABLES tmsg. -
BDC Recording for 3 transactions in SD
i need to cancel contracts using these transaction sequentialy i.e VF46 VF11and VF42 using bdc .how to go about it in recording for 3 transactions
regards
shankarHi try this,
Call one BDC after the another, Like if u want to create a sales order and then correspondingly display it as well, u can capture the sales order created afer ur first BDC theu the messages mostly in SYMSGV1 and using this u can do a call txn skip first screne of VA03.
If u are talking about session, get 2 session names and move them to different sessions or if both txn are dependant on each other, move it one after the other thru call txn. It is the same, howmany ever trx u wabnt to post thru BDC.
OR
After your call transaction stmnt, check for sy-subrc = 0 and refresh bdc internal table.
Populate the bdc internal table for the new trxn and then call the trxn using call transaction stmnt. -
BDC Recording for Table Control
dears,
I am using BDC for posting payments by TCode FP05.
after processing two payment items i am getting the following error.
"Runtime error SAPSQL_ARRAY_INSERT_DUPREC has occurred"
but when i repeat the same recording in foreground it processes the payment sucessfully.
wht could be wrong with the recording?
how to record for table control?
ByeHi Syed,
I could find few notes for the array insert duplicate runtime error.
136433
191544
You can find may in OSS.
Cheers
Vinod -
No Acct Document with BAPI_GOODSMVT_CREATE & BDC Recording for MB1A 221Q
Please see my posting @ Re: BAPI_GOODSMVT_CREATE or BDC for MB1A not creating Accounting Doc
It seems that I can do a 221Q direct via MB1A successfully and generate a Material Doc & an Accounting Doc. I'm not using reference to Reservation / PO, but obviously I have to provide my Cost Center & Order#.
If I create a BDC Recording from this same successful dataset and process the BDC "in the foreground", I get the Material Doc but the Accounting Doc is not created. The same problem occurs in the Background.
I also get this very same issue if I use the data in a call to BAPI_GOODSMVT_CREATE directly, followed by a BAPI_TRANSACTION_COMMIT.
I can't quite figure out what the issue is, since if I'm using the same data as in the successful MB1A direct posting and creating a BDC recording from the very same data/screen sequence, shouldn't the Accounting Document be created?
Many thanks..what error you are getting..? and are you able to post them separately .
Maybe you are looking for
-
TS3297 every time I try to download iTunes in my new computer it shows me an error message
Every time I try to download iTunes in my new computer it shows me an error message that says The installer has insuffucuent privileges to acces this directory C:/program files (x86)/iTunes. The installation cannot continue. log on as administrator o
-
I just purchased Computer, I have Netflix, when I went to use I was told that Computer needed A WHOL driver?What do I need to do?
-
My windows installer will not let me upgrade I tunes
-
How do I burn a dvd from iMovie if I no longer have iDVD?
iDVD didn't come on my new MacBook Pro so when I went to burn a dvd of a movie I made the pull down option was to send to iDVD. If iDVD isn't there how I am supposed to burn a DVD? I purchased Aimersoft DVD Creator but it won't allow me to drag my
-
Expiring Authorizations Notificatoion
Hope this is the correct forum We have been getting a notification from Global It about Expiring Authorization There are three productive systems about to expire BCP (001) ZBOJ_CRM_UIU_SRV_PROF Business Objects Message Processing BCP (