BDC recording steps

could anyone help me out in knowing the BDC recording steps in detail for co11n.
regards
ray

Hi,
Steps used in Recording
1) Start by going to SHDB transaction. There, on top left corner, you will see the "New Recording" button.
2) After clicking on the new recording button, you will be presented with a screen to specify the name of this recording, AND, the transaction which you want to record. Fill these up, and click on "Start Recording" button.
3) Handle the transaction just like normal. However, you should know that all that you do in the transaction are captured.
4) Once you finish the transaction, the screen will return to SHDB transaction. You will see a number of instructions. This is not of much interest to us at this point. Just save this recording by clicking on the "Save" icon at the top.
5) Once saved, click on the "Back" button to display a list of recordings. By default, the recording you just did will be the only one shown on the screen.
6) Select this row, and then, click on "Generate Program" from the top middle tool bar.
7) Select the program type as executable, and fill up other attributes, like short description..etc.
8) When asked for a package, for now, select the local object.
Usually, what you will be doing, is to use this code that is generated as a skeleton, and the data will be got dynamically.
regards ,
Stephen.
Reward if it is useful.

Similar Messages

Material Master BDC recording

hi gurus,
i am trying to do a material master creation using BDC recording,
i am new i dont know how to modify the code,
the following is the code, please let me know how to make changes.
report ZTEST95
       no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case default
                              'C:\Documents and Settings\Deskt'
                            & 'op\test95.txt'.
   DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
      '* data element: ' followed with the data element
      which describes the field.
      If you don't have a data element use the
      comment without a data element name
3.) The second line shows the fieldname of the
      structure, the fieldname must consist of
      a fieldname and optional the character '_' and
      three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record,
data element: MATNR
        MATNR_001(040),
data element: MBRSH
        MBRSH_002(001),
data element: MTART
        MTART_003(004),
data element: REF_MATNR
        MATNR_004(040),
data element: XFELD
        KZSEL_01_005(001),
data element: MAKTX
        MAKTX_006(040),
data element: MEINS
        MEINS_007(003),
data element: MATKL
        MATKL_008(009),
data element: SPART
        SPART_009(002),
data element: MTPOS_MARA
        MTPOS_MARA_010(004),
data element: BRGEW
        BRGEW_011(017),
data element: GEWEI
        GEWEI_012(003),
data element: NTGEW
        NTGEW_013(017),
      end of record.
End generated data section ***
start-of-selection.
perform open_dataset using dataset.
perform open_group.
do.
read dataset dataset into record.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'RMMG1-MATNR'
                              record-MATNR_001.
perform bdc_field       using 'RMMG1-MBRSH'
                              record-MBRSH_002.
perform bdc_field       using 'RMMG1-MTART'
                              record-MTART_003.
perform bdc_field       using 'RMMG1_REF-MATNR'
                              record-MATNR_004.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              record-KZSEL_01_005.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-MAKTX_006.
perform bdc_field       using 'MARA-MEINS'
                              record-MEINS_007.
perform bdc_field       using 'MARA-MATKL'
                              record-MATKL_008.
perform bdc_field       using 'MARA-SPART'
                              record-SPART_009.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              record-MTPOS_MARA_010.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-BRGEW'.
perform bdc_field       using 'MARA-BRGEW'
                              record-BRGEW_011.
perform bdc_field       using 'MARA-GEWEI'
                              record-GEWEI_012.
perform bdc_field       using 'MARA-NTGEW'
                              record-NTGEW_013.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
perform bdc_transaction using 'MM01'.
enddo.
perform close_group.
perform close_dataset using dataset.
thanks.

Hi,
It is better if the Material Master creation step is done by LSMW - Direct Input method with the following object:
Object               0020   Material master
Method               0000
Program name         RMDATIND
Program type         D   Direct input
Check the program documentation for more details.
For a sample data file generation ( Sequential file ), check the program RMDATGEN
If the reqmt., is for a repetetive loading of Material Master you could schedule / execute the LSMW by following program: /SAPDMC/SAP_LSMW_INTERFACE.
Hope this helps.
Best Regards, Murugesh

How to use BDC recording in Workflow.

Hi experts,
Anyone kindly help me for the following case...
If sales order gets created, mail has to be sent to every user. Also for that sales order, delivery should be created in background and again mail has to be sent to all users...
I m clear with sending mail. but i m struggled while creating delivery in background. i dont know how to do this. I hav an idea that it can be created using BDC recording and this recording program can be called in our method which is created in our business object.
How to create a single BDC recording to create sales order as well as creating delivery in background... Is it possible to do like this. Or is there any function module to create delivery in background with respect to sales order number?
kindly give some suggestion and step by step procedure to do this...
Thanks in advance...
Regards
Raaams...

Hi Ram
Check this BAPI once BAPI_OUTB_DELIVERY_CREATE_SLS.
If this doesnt help do BDC recording and create a FM with the help of BDC recording. Please note that Call Transaction should happen in background otherwise your BDC wont work.
Please revert back if you have any queries.
Regards,
Gautham Paspala

Problem with SM37 BDC recording

Hi ,
I want to change the output device for the job scheduled of 1000 pgms in SM37.
For this i am using BDC recording.
But when i run the recording, it does not fill the data and does not move from 1 screen to other screen.
I have checked the recording, and everything got recorded.
Please suggest .
Thanks in advance.
Rgds/Abhi

Hi,
Why not make things simpler by using FM BP_CHANGE_JOB_STEP. Parameters required are:
JOBNAME
JOBCOUNT
STEP-PROGRAM & STEP-TYP (equal to 'A')
STEP_NUM
ALLPRIPAR-PDEST
Presumably you will have the info for JOBNAME, JOBCOUNT etc from your BDC feed. To preserve the rest of the print parameters then use something like FM BP_JOB_READ and fill in ALLPRIPAR fields.
Thanks,
Pete

BDC recording for AS01

hi all,
how to do bdc recording for AS01.please send me step step by approach.

Hi Satya,
Welcome to SDN.
Check this Sample program.
REPORT ZASSET .
INCLUDE ZASSET_INC .
PARAMETERS: P_PCFILE LIKE RLGRAP-FILENAME.
*PARAMETERS: P_FILE_S LIKE RLGRAP-FILENAME.
PARAMETER : H_CHK AS CHECKBOX.
"Proc Mode
Include the BDC *
**BDC DATA STUCTURE
*DATA: BEGIN OF BDCDATA OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
*DATA: END OF BDCDATA.
messages of call transaction
*DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
TYPE-POOLS
TYPE-POOLS TRUXS.
DATA IT_DATA1 TYPE TRUXS_T_TEXT_DATA.
DATA : BEGIN OF IT_DATA OCCURS 0,
INVZU(015),
ANLKL(008),
BUKRS(004),
TXT50(100),
SERNR(018),
MENGE(018),
INKEN(001),
AKTIV(010),
KOSTL(010),
WERKS(004),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ(001),
LIFNR(010),
AFASL(004),
NDJAR(003),
AFABG(010),
ANLGR(012),
ANLGR2(004),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
TDATE(010),
TCODE(004),
TAMT(018),
PERNR(012),
KFZKF(015),
SAP_ASSET(12),
ERR_ASSET,
END OF IT_DATA.
DATA : BEGIN OF IT_DATA2 OCCURS 0,
INVZU(015),
TDATE(010),
TCODE(004),
TAMT(018),
END OF IT_DATA2.
DATA : BEGIN OF IT_DATA3 OCCURS 0,
ITEM(003),
INVZU(015),
ANLKL(010),
BUKRS(010),
TXT50(050),
SERNR(018),
MENGE(018),
INKEN(001),
AKTIV(010),
KOSTL(010),
WERKS(004),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ(001),
LIFNR(010),
AFASL(004),
NDJAR(003),
AFABG(010),
ANLGR(012),
ANLGR2(004),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
TDATE(010),
TCODE(004),
TAMT(018),
SAP_ASSET(12),
ERR_ASSET,
END OF IT_DATA3.
SUB ASSET MASTER TABLE
DATA : BEGIN OF IT_DATA_SUB OCCURS 0,
INVZU_M(015),
INVZU(015),
BUKRS(004),
TXT50(100),
ANLHTXT(050),
SERNR(018),
MENGE(018),
MEINS_007(003),
XHIST_008(001),
AKTIV(010),
GSBER_011(004),
KOSTL(010),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ_016(001),
LIFNR(010),
LIEFE(030),
NDJAR(003),
NDPER(003),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
BZDAT(010),
BWASL(003),
ANBTR01(016),
ANLN1(012),
ERR_SUB,
SUB_CODE(012),
ERR_SUB1,
END OF IT_DATA_SUB.
*& At selection-screen on value request for getting f4 help
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PCFILE.
PERFORM VALUE_REQUEST_P_FILE.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE_S.
PERFORM VALUE_REQUEST_P_FILE_S.
START OF SELECTION *
START-OF-SELECTION.
To Upload the flat file datas *
PERFORM GET_DATA.
PERFORM UP_LOAD.
PERFORM SUB_UPLOAD.
WRITE :/ 'FOLLOWING ASSETS CREATED'.
WRITE:/ 'OLD ASSET'.
WRITE: 20 'COMPANY'.
WRITE: 30 'SAP CODE'.
LOOP AT IT_DATA WHERE ERR_ASSET NE 'X'.
WRITE :/ IT_DATA-INVZU,
20 IT_DATA-BUKRS, 30 IT_DATA-SAP_ASSET.
ENDLOOP.
SKIP 2.
WRITE :/ 'FOLLOWING SUB ASSETS CREATED'.
WRITE:/ 'OLD ASSET'.
WRITE: 16 'OLD SUB ASSET'.
WRITE: 35 'COMPANY'.
WRITE: 45 'SAP CODE'.
WRITE: 60 'SUB ASSET'.
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X' AND ERR_SUB1 NE 'X'.
WRITE :/ IT_DATA_SUB-INVZU_M,
16 IT_DATA_SUB-INVZU,
35 IT_DATA_SUB-BUKRS, 45 IT_DATA_SUB-ANLN1, 60
*IT_DATA_SUB-SUB_CODE.
ENDLOOP.
*& Form value_request_p_file
FORM VALUE_REQUEST_P_FILE .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'x'
IMPORTING
FILE_NAME = P_PCFILE.
ENDFORM. " value_request_p_file
*& Form UP_LOAD
text
--> p1 text
<-- p2 text
FORM UP_LOAD .
SORT IT_DATA BY INVZU.
SORT IT_DATA2 BY INVZU.
DATA : V_LEN1 TYPE I, V_LEN2 TYPE I, V_SUBSTR1(50) ,V_SUBSTR2(50).
perform open_dataset using dataset.
PERFORM OPEN_GROUP.
LOOP AT IT_DATA.
CONDENSE IT_DATA-TXT50.
V_LEN1 = STRLEN( IT_DATA-TXT50 ).
IF V_LEN1 > 50.
V_SUBSTR1 = IT_DATA-TXT50+0(50).
V_LEN2 = V_LEN1 - 50.
V_SUBSTR2 = IT_DATA-TXT50+50(50).
ELSE.
V_SUBSTR1 = IT_DATA-TXT50.
V_SUBSTR2 = ''..
ENDIF.
REFRESH BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0105'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-BUKRS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'ANLA-ANLKL'
IT_DATA-ANLKL.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
V_SUBSTR1. "IT_DATA-TXT50.
PERFORM BDC_FIELD USING 'ANLA-TXA50'
V_SUBSTR2.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA-MENGE.
*perform bdc_field using 'ANLA-INKEN'
record-INKEN_006.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-PERNR'.
PERFORM BDC_FIELD USING 'ANLZ-PERNR'
IT_DATA-PERNR.
PERFORM BDC_FIELD USING 'ANLZ-KOSTL'
IT_DATA-KOSTL.
PERFORM BDC_FIELD USING 'ANLZ-WERKS'
IT_DATA-WERKS.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA-STORT.
IF IT_DATA-ANLKL = 'VHCL'.
PERFORM BDC_FIELD USING 'ANLZ-KFZKZ'
IT_DATA-KFZKF.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD42'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA-ORD42.
*perform bdc_field using 'RA02S-EQANZ'
record-EQANZ_014.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB06'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA-LIFNR.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLV-VSART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RA02S-XAKPLA(02)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-AFASL'.
IF IT_DATA-TCODE IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
ENDIF.
PERFORM BDC_FIELD USING 'ANLB-ANLGR'
IT_DATA-ANLGR.
PERFORM BDC_FIELD USING 'ANLB-ANLGR2'
IT_DATA-ANLGR2.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
IF IT_DATA-TCODE IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA-ANBTR01_01.
IF H_CHK NE 'X'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA-ANBTR01_06.
ENDIF.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA-TDATE.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA-TCODE.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA-TAMT.
ENDIF.
REFRESH MESSTAB.
CALL TRANSACTION 'AS91' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
PERFORM BDC_TRANSACTION USING 'AS91'.
ENDLOOP..
PERFORM CLOSE_GROUP.
*perform close_dataset using dataset.
ENDFORM. " UP_LOAD
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_TAB_RAW_DATA = IT_DATA1
I_FILENAME = P_PCFILE
TABLES
I_TAB_CONVERTED_DATA = IT_DATA.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IT_DATA3.
IF IT_DATA3-ITEM = '1'.
MOVE-CORRESPONDING IT_DATA3 TO IT_DATA.
APPEND IT_DATA.
ELSEIF IT_DATA3-ITEM = '2'.
IT_DATA2-INVZU = IT_DATA3-INVZU.
IT_DATA2-TDATE = IT_DATA3-ANLKL.
IT_DATA2-TCODE = IT_DATA3-BUKRS.
IT_DATA2-TAMT = IT_DATA3-TXT50.
APPEND IT_DATA2.
ENDIF.
ENDLOOP.
IF NOT P_FILE_S IS INITIAL.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_TAB_RAW_DATA = IT_DATA1
I_FILENAME = P_FILE_S
TABLES
I_TAB_CONVERTED_DATA = IT_DATA_SUB.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " GET_DATA
FORM BDC_DYNPRO
--> PROGRAM
--> DYNPRO
**FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
**ENDFORM. " BDC_DYNPRO
FORM BDC_FIELD
--> FNAM
--> FVAL
**FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
**ENDFORM. "BDC_FIELD
***& Form bdc_transaction
text
-->TCODE text
**FORM BDC_TRANSACTION USING TCODE.
REFRESH MESSTAB.
CALL TRANSACTION TCODE USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
**ENDFORM. " bdc_transaction
*& Form VALUE_REQUEST_P_FILE_S
text
--> p1 text
<-- p2 text
FORM VALUE_REQUEST_P_FILE_S .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'x'
IMPORTING
FILE_NAME = P_FILE_S.
ENDFORM. " VALUE_REQUEST_P_FILE_S
*& Form sUB_upload
text
--> p1 text
<-- p2 text
***FORM SUB_UPLOAD .
DATA : V_LEN1 TYPE I, V_LEN2 TYPE I, V_SUBSTR1(50) ,V_SUBSTR2(50).
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X'.
CONDENSE IT_DATA_SUB-TXT50.
V_LEN1 = STRLEN( IT_DATA_SUB-TXT50 ).
IF V_LEN1 > 50.
V_SUBSTR1 = IT_DATA_SUB-TXT50+0(50).
V_LEN2 = V_LEN1 - 50.
V_SUBSTR2 = IT_DATA_SUB-TXT50+50(50).
ELSE.
V_SUBSTR1 = IT_DATA_SUB-TXT50.
V_SUBSTR2 = ''..
ENDIF.
REFRESH BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=MAST'.
PERFORM BDC_FIELD USING 'ANLA-ANLN1'
IT_DATA_SUB-ANLN1.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA_SUB-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
V_SUBSTR1. "IT_DATA_SUB-TXT50.
PERFORM BDC_FIELD USING 'ANLA-TXa50'
V_SUBSTR2. "IT_DATA_SUB-TXT50.
****perform bdc_field using 'ANLH-ANLHTXT'
it_data_sub-ANLHTXT_004.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA_SUB-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA_SUB-MENGE.
****perform bdc_field using 'ANLA-MEINS'
it_data_sub-MEINS_007.
****perform bdc_field using 'RA02S-XHIST'
it_data_sub-XHIST_008.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA_SUB-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA_SUB-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-GSBER'.
****perform bdc_field using 'ANLZ-GSBER'
it_data_sub-GSBER_011.
****perform bdc_field using 'ANLZ-KOSTL'
it_data_sub-KOSTL_012.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA_SUB-STORT.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD41'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA_SUB-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA_SUB-ORD42.
****perform bdc_field using 'RA02S-EQANZ'
it_data_sub-EQANZ_016.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB07'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA_SUB-LIFNR.
****perform bdc_field using 'ANLA-LIEFE'
IT_DATA_SUB-LIEFE.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LEART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'T093T-AFBKTX(01)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-NDPER'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
PERFORM BDC_FIELD USING 'ANLB-NDJAR'
IT_DATA_SUB-NDJAR.
PERFORM BDC_FIELD USING 'ANLB-NDPER'
IT_DATA_SUB-NDPER.
****perform bdc_field using 'ANLB-AFABG'
record-AFABG_029.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
IF IT_DATA_SUB-BWASL IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01_01.
Accu deprn automatically calculated by system changed on 6th Aug.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA_SUB-ANBTR01_06.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA_SUB-BZDAT.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA_SUB-BWASL.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
****perform bdc_transaction using 'AS94'.
ENDIF.
REFRESH MESSTAB.
CALL TRANSACTION 'AS94' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
IF SY-SUBRC = 0.
READ TABLE MESSTAB INDEX 1.
IT_DATA_sub-SUB_CODE = MESSTAB-MSGV1.
DATA AN1 TYPE ANLN1.
DATA AN2 TYPE ANLN2.
GET PARAMETER ID 'AN2' FIELD AN2.
IT_DATA_SUB-SUB_CODE = AN2. "MESSTAB-MSGV1.
MODIFY IT_DATA_SUB TRANSPORTING SUB_CODE.
ELSE.
IT_DATA_SUB-ERR_SUB1 = 'X'.
MODIFY IT_DATA_SUB TRANSPORTING ERR_SUB1.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
***ENDFORM. " sUB_upload
****& Form SUB_UPLOAD1
text
***FORM SUB_UPLOAD1 .
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=MAST'.
PERFORM BDC_FIELD USING 'ANLA-ANLN1'
IT_DATA_SUB-ANLN1.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA_SUB-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
IT_DATA_SUB-TXT50.
****perform bdc_field using 'ANLH-ANLHTXT'
it_data_sub-ANLHTXT_004.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA_SUB-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA_SUB-MENGE.
****perform bdc_field using 'ANLA-MEINS'
it_data_sub-MEINS_007.
****perform bdc_field using 'RA02S-XHIST'
it_data_sub-XHIST_008.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA_SUB-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA_SUB-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-GSBER'.
****perform bdc_field using 'ANLZ-GSBER'
it_data_sub-GSBER_011.
****perform bdc_field using 'ANLZ-KOSTL'
it_data_sub-KOSTL_012.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA_SUB-STORT.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD41'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA_SUB-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA_SUB-ORD42.
****perform bdc_field using 'RA02S-EQANZ'
it_data_sub-EQANZ_016.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB07'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA_SUB-LIFNR.
****perform bdc_field using 'ANLA-LIEFE'
IT_DATA_SUB-LIEFE.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LEART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'T093T-AFBKTX(01)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-NDPER'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
PERFORM BDC_FIELD USING 'ANLB-NDJAR'
IT_DATA_SUB-NDJAR.
PERFORM BDC_FIELD USING 'ANLB-NDPER'
IT_DATA_SUB-NDPER.
****perform bdc_field using 'ANLB-AFABG'
record-AFABG_029.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01_01.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA_SUB-ANBTR01_06.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA_SUB-BZDAT.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA_SUB-BWASL.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
****perform bdc_transaction using 'AS94'.
REFRESH MESSTAB.
CALL TRANSACTION 'AS94' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
IF SY-SUBRC = 0.
READ TABLE MESSTAB INDEX 1.
IT_DATA_sub-SUB_CODE = MESSTAB-MSGV1.
DATA AN1 TYPE ANLN1.
DATA AN2 TYPE ANLN2.
GET PARAMETER ID 'AN2' FIELD AN2.
IT_DATA_SUB-SUB_CODE = AN2. "MESSTAB-MSGV1.
MODIFY IT_DATA_SUB TRANSPORTING SUB_CODE.
ELSE.
IT_DATA_SUB-ERR_SUB1 = 'X'.
MODIFY IT_DATA_SUB TRANSPORTING ERR_SUB1.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
***ENDFORM. " sUB_upload
and one more thing i face some issues when doing bdc for AS01, so i use AS91 and AS92 for uploading by using LSMW (direct input method and recording method) and it was successful.(if u have to do coding go for BDC/BAPI or there is no coding better to choose LSMW (it is the easiest way) as of my knowledge, so before starting just analyze once which method is best for ur requirement.
Reward Points for Useful Answers
Thanks
Naveen khan
Message was edited by:
Pattan Naveen

BDC recording not executing last OK code for order technical completion

Hello!
Regarding a QM requirement, I have created a rather simple BDC recording to change the activity type of an order to new ones (based on particular conditions not relevant here) on transaction IW32.
However, if the order is technically complete, I have to cancel the technical completion, change the activity type, and then complete the order technically again (so it remains just the way it was before modification).
The only order types relevant in the requirement are YM01 and YM02. For YM01, the BDC recording works like a charm. But when executing the proper recording for type YM02, the last OK code (i.e. pressing the OK button on the Complete subscreen) is ignored and the process remains incomplete: the orders are never completed technically again.
Here is the recording:
0     T     IW32     BS AA X   F
SAPLCOIH                       101     X
0           BDC_OKCODE     /00
                                        0           CAUFVD-AUFNR     80000005
SAPLCOIH                       3000     X
0           BDC_OKCODE      =WIAR
SAPLCOIH                       3000     X
0           BDC_OKCODE     /00
                                        0           CAUFVD-ILART     206
SAPLCOIH                       3000     X
0           BDC_OKCODE      =ARCH
SAPLIWO1                           200             X
0           BDC_OKCODE      =WTER
                                        0           RIWO1-CLNOT     X
Any help would greatly appreciated!
Best regards,
André Santos

Leandro, thanks for the answer!
The BDC recording does not work when executed visibly or step by step. After some extensive debugging, I realized that the final screen (the technical complete confirmation screen) is not an actual subscreen, even though it has its own number. That screen is actually generated by an FM, so apparently that's why it's ignored when the BDC is executed.
I found a BAPI to replace that missing step: BAPI_ALM_ORDER_MAINTAIN. However, I'm having a hard time figuring out how to reference the orders I need it to complete. The FM asks for an IT_METHODS table and I couldn't tie the method to the orders:
it_methods-refnumber = ???
it_methods-objecttype = 'HEADER'. "That's what I found on the example, not sure whether this is right or not.
it_methods-method = 'TECHNICALCOMPLETE'.
it_methods-objectkey = ??? "Maybe the order number itself?
APPEND it_methods.
Has anyone used this BAPI before?
Edited by: André Felipe Oliveira dos Santos on Oct 20, 2010 2:18 PM

CA01 Routing BDC Recording

I have done a BDC recording for CA01, in the Setup Time and Machine Time column there was a warning message saying "Enter the Setup Time", we press enter and enter a value for both these fields. But the OK Code for this ENTER is not being recorded, and when we run the BDC Program, it comes and halts at this field with the warning message. How to avoid this warning message (or) overcome this problem..?
Your help is highly appreciated.
Thanks
Murugappa

Hi,
I suggest to use the BI program with following details for the creation step by CA01 tx.:
Objekt               0170   Arbeitsplan
Methode              0001   Batch Input
Programmname         RCPTRA01
Programmtyp          B   Batch-Input
Since the Routings have a complex data dependency on other objects and screen sequence, this would be helpful.
May be the problem you are facing also could be addressed in this standard object. I have not faced any such message problem as I have loaded Normal / Standard routings, Quality routings in above method.
Hope this helps.
Best Regards, Murugesh AS

Handling popups in bdc recording

Hi,
I am doing bdc recording for a transaction, and there is a popup screen to be handled by the user, but when i am doing recording it is not recording the popup menus. can you please tel me how i can handle popups in BDC recording.
It is very urgent.
Thank you.

Hi Ameen,
Award points if useful...
Step by Step approach to ceate simple BDC session program using reusable template.
This step by step approach can be used to create a Simple BDC program i.e for a transaction which does not have any table control / looping at screen table. The same can also be enhanced to develop a program for transactions involving table controls .
1. Create a new program as executable program using SE38 transaction code.
2. Copy the following template code into your program .
---- Start of Template -
REPORT NO STANDARD PAGE HEADING LINE-SIZE 200 LINE-COUNT 300.
*-- DATA DECLARATION--
*---Types
DATA : BEGIN OF t_upload,
FIELD1(10),
FIELD2(2),
FIELD3(18),
FIELD4(35),
END OF t_upload.
*--- Tables
DATA : BEGIN OF i_bdcdata OCCURS 0."to hold the transaction record
INCLUDE STRUCTURE bdcdata.
DATA: END OF i_bdcdata.
DATA: i_upload LIKE STANDARD TABLE OF t_upload," to hold file data.
i_upload1 LIKE STANDARD TABLE OF t_upload." to hold file data.
*--- Work Areas
DATA: wa_upload2 LIKE t_upload,
wa_upload LIKE t_upload,
wa_upload1 LIKE t_upload.
*--- Variables
DATA: v_count1(4) TYPE n,
v_error TYPE c,
v_session(12),
v_field(21) TYPE c,
v_message(60) type 'C'.
*--Constants
DATA: c_open TYPE c VALUE '(',
c_close TYPE c VALUE ')',
c_x TYPE c VALUE 'X'.
*---Initialisation
initialization.
refresh : i_upload , i_upload1 ,i_bdcdata.
-------Selection Screen Design -
*Selection screen for input of upload file address
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
---AT SELECTION SCREEN -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*--For popup to select file.
PERFORM give_help.
-----START OF SELECTION -
START-OF-SELECTION.
*--Data upload using WS_Upload.
PERFORM get_data.
*-- OPEN SESSION
PERFORM open_group.
*--Insert transactions using BDCDATA table in the session.
PERFORM do_transaction .
*-- Close the session.
PERFORM close_group.
END-OF-SELECTION.
*& Form f_get_data
For data upload from external file.
FORM get_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_upload
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
DELETE I_UPLOAD INDEX 1.
ENDIF.
ENDFORM. " f_get_data
*& Form F_open_group
To open session in session management.
FORM open_group.
v_session = 'TCODE'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = v_session
user = sy-uname
keep = 'X'.
ENDFORM. " F_open_group
*& Form f_do_transaction
Insert transactions in session after passing values to BDCDATA
FORM do_transaction.
LOOP AT i_upload INTO wa_upload .
*---- insert your generated codes from recording at SHDB here
*----- insertion ends
perform bdc_transaction using 'TCODE'.
REFRESH : I_BDCDATA.
CLEAR : WA_UPLOAD.
ENDIF.
ENDLOOP.
ENDFORM. " f_do_transaction
*& Form bdc_dynpro
For appending screen details to BDCDATA
FORM bdc_dynpro USING program dynpro.
CLEAR i_bdcdata.
i_bdcdata-program = program.
i_bdcdata-dynpro = dynpro.
i_bdcdata-dynbegin = 'X'.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. "bdc_dynpro
*& Form bdc_field
For appending field details to bdcdata table
FORM bdc_field USING fnam fval.
CLEAR i_bdcdata.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. " bdc_field
*& Form bdc_transaction
For inserting Transaction in the session
FORM bdc_transaction USING tcode.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = tcode
TABLES
dynprotab = i_bdcdata.
ENDFORM. " bdc_transaction
*& Form F_close_group
For closing the session created in Session manager SM35
FORM close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
concatenate 'Session ' v_session 'successfully created' into v_field.
MESSAGE v_field type 'I'..
CALL TRANSACTION 'SM35'.
ENDFORM. "f_close_group
*& Form f_give_help
For user help to select file
FORM give_help.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
mask = ',.,..'
mode = 'O'
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0 AND NOT sy-msgty IS INITIAL.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f_give_help
---- End of Template -
3.Go to the transaction SHDB in another session ( you can also give TCODE - OSHDB in transaction code window and hit enter ).
4.Create you transaction recording in SHDB . Ensure your transaction recording takes care of input values to all the
fields to which you intend to pass values in the BDC.
5.Once your recording is done correctly create the program from recording in the SHDB transction . You will find the button to create program in SHDB . Choose the option of creating from file when you proceed through the subsequent steps.
6. Define data type t_upload and structure wa_upload in the template program with fields of structure 'RECORD' from the program generated using SHDB recording ( replace the field1, field2 and so on as per your requirement). For your understanding you can remove the suffixes to the
field name but keep the field size unchanged.
7.Copy the coding existing between 'do' and 'enddo' statement from the generated program . Insert the copied code between the loop and endloop code of form 'Do_transaction '. Replace fields of structure 'RECORD' with respective fields of structure wa_upload.Insert constant values wherever possible in transaction recording.You can also handle customised data conversions here.
8.Replace 'TCODE' in the template program with the transaction code you intend to process in this BDC.
9.Please carry out further syntax check and resolve the related issues.
This program will provide for input help to select upload file from local machine. The file needs to be in Tab delimited format and is assumed to have first row as column headers .
On successful creation of session you will be prompted with a Information popup giving the name of session ,and will take you to the SM35 transaction to process your session.

BDC recording for VF11 more than 14 invoices

hi, i am facing a problem when cancelling more than 14 invoices through bdc recording.
Normally , in vf11 , after entering 14 invoice numbers , i press enter and then click on the scroll bar , to get the further input fields.
Now , while recording these steps through BDC, the pressing of the scroll bar to get further input fields is not captured. The BDC OK code which is captured is /00 , which is basically for enter is not working.
How can I insert more than 14 invoices through BDC recording?
Edited by: RUPAKBH on Sep 24, 2011 7:28 AM

hi,
for such kind of requirements we need to use bapi's instead of bdc.
for reference [Click here|http://wiki.sdn.sap.com/wiki/display/ABAP/Cancelbillingdocument+%28VF11%29]
*---cancel billing doc (transaction VF11)
     CALL FUNCTION 'BAPI_BILLINGDOC_CANCEL1'
       EXPORTING
         billingdocument = d_bill_doc
       TABLES
         return          = it_bapireturn1
         success         = it_bapivbrksuccess.

Problem in BDC Recording

Hi I am having a problem in BDC Recording. My requirement is that when I input data in transaction fb02 to block the invoices, It shows a list of invoices. Now i need to double click that item(line) in which PK = 06 at runtime during bdc recording. During BDC recording it takes the line number on which we have clicked which is constant but i want it dynamic that if item 1 is having PK=6, that line should be double clicked and if item 3 is having PK=6, the third item should be double clicked to open another screen. Kindly help me... Thanks in advance.

Hi Ravi,
While writing your code that is in your code you know which line number is having the PK = 06, then you can use the same line number and add the code for double click after that.
Regards,
Atish

Need help for bdc recording TC fp05

Hi,
My requirement is: I want to create a Payment lot using fp05 and then post
it through a program.
First i want to know is there any BAPI available to do that.
I couldnt find any BAPI. That is why i did BDC Recording. The recording is working till Payment Lot creation. But after creation when i try to post the lot, it is giving status as "Direct Posting Stopped". Again if i come out of the program and then manually post it, it is working fine. But through program if i try to post it, it is giving status as "Direct Posting Stopped".
Is this because we cannot Post a Payment Lot programatically or some Authorisation issue is there.
Can anyone respond immediately
Regards,
Sheron

Hi Raj,
May be this can be useful.
BAPI_INSPOPER_RECORDRESULTS
You can search other in se37 BAPIINSP.
Regards,
Amit Mittal.

What is the tcode for bdc recording and how to do in hr-abap for pa and om

hi,
I need to do the bdc recording for pa and om. So, can any of you tell me how to do and what are the tcodes we have to use.
thanks & regards,
Sekhar.

Hi ,
Here is the link from you will get all the transaction code
http://www.sap-basis-abap.com/saphr004.htm
As far PA specfic some tcodes are given below
PA20 Display HR Master Data
PA30 Maintain HR Master Data
PA40 Personnel Actions
PA41 Correct Actions
PA42 Fast Entry for Actions
PA46 Import from Resumix
PA47 Export to Resumix
PA48 Hiring from non-SAP system
PA51 Display Time Data
PA53 Display Time Data
PA61 Maintain Time Data
PA62 List Entry of Additional Data
PA63 Maintain Time Data
PA64 Calendar Entry
PA70 Fast Entry
PA71 Fast Entry of Time Data
PA88 Benefits
For OM specific
PP01 Maintain Plan Data (menu-guided)

Add button inactive in Match record step in Import manager

Hello,
In the Main table, I want to see the country data as 'US; United States' in country field.
I have made both 'country code' and 'country description' as display fields in the country flat lookup table.
When I load country code and country description from import manager from an excel file, the 'Add' button in Match records step is inactive for both the fields.
How can I do the matching in import manager without sacrificing my requirement of showing country as 'US; United States' in main table ?
Thanks,

answer to this question is already available in forum.

Why some screens are hiddens in BDC record mode?

I'm trying to create a BDC record in VA01 transaction but in this mode some screens are hidden just like screen "Material substitution(selecting a material)" Dynpro 800 Program "SAPMV45A"
Is it possible to show this screen in BDC recorder? how can i do it?
Regards

Hi,
i´m no expert in this but for a recording of material substitution you could try with transactions VB12 or VB13
Best regards.

BDC Recording - Make a field required

Dear Experts,
We are using a BDC recording to call MIRO and send it to an agent via workflow using a z-table.
The customer wants the baseline date on this recording grey'ed out and the business area field required.
The baseline date is on the "PAYMENT" tab of MIRO and Business Area on the "DEATILS" tab.
I have created a screen and transaction variant a year ago and assigned it to the t-code, but now with the BDC calling MIRO for the INVOICE Scanning project, these fields can be overwritten and left out.
How can I do it via BDC?
Transnet Freight Rail
Edited by: Annelize Meyer on Mar 17, 2010 1:39 PM

You could create a on-submit pl/sql validation on 'p2_estim_val'. The validation code will return a failure if the value of p2_estim_val is not specified if the value of p2_reason_to_scap_sell is non-null
The validation code could be something as simple as
if not :p2_reason_to_scap_sell is null and :p2_estim_val is null then
return 'A value is required for p2_estim_val';
end if;varad

BDC recording steps

Similar Messages

Maybe you are looking for